Small hose clamp suitable for 3/16" to 5/8" OD tubing Go-to clamp for anywhere you need to secure tubing Made from stainless steel These Stainless Steel small hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case. Our small clamps will fit hoses with 3/16" through 5/8" OD.
$1.69
Thin walled tubing perfect for siphoning or tranferring liquids when not under pressure. This is the most common size hose for homebrewing that you would need to fit onto the plastic spigots (FE347), 3/8'' OD bottle fillers, and the 3/8'' OD racking canes. 3/8" ID, 1/2" OD 1/8" thick wall
$2.69 - $36.79
Use for the 1/2'' OD racking cane and 1/2'' OD bottle fillers.
$3.69 - $52.49
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize. Please note, as the reviews will also tell you, this is a clamp that will fit 1/2" OD tubing. If you are looking for a clamp for 1/2" ID (with 3/4" OD) choose the H955 clamp.
$1.74
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$1.89
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$1.79
Hose clamp suitable for 3/8" to 7/8" OD tubing Go-to clamp for anywhere you need to secure tubing Made from stainless steel These Stainless Steel hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case. Stainless steel hose clamp will fit hoses with 3/8" through 7/8" OD.
$1.79
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. 5/16 inch ID tubing is recomended for use with Mini and Regular Auto Siphons. Thin wall tubing is recomended for siphoning and transferring liquids. For pumping, keg lines, or other pressurized applications, see our thick wall and keg tubing.
$3.69 - $36.79
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. 7/16 inch ID tubing is recomended for use with 1/2 inch Auto Siphons. Thin wall tubing is recomended for siphoning and transferring liquids. For pumping, keg lines, or other pressurized applications, see our thick wall and keg tubing.
$4.19 - $52.49
Clamp valve for siphon tubing. Can be used to regulate the flow during siphoning or bottle filling. Fits tubing up to 1/2 inch outside diameter (OD).
$1.99
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.
$7.39 - $94.49
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product.
$15.79 - $183.79
Used to clean the inside of tubing using a pump. Place in the line, hook up to the outlet of the pump and push through the line. Be careful not to suck into the pump head! Available in sizes for 1/2", 1", 1.5" and 2.5" inner diameter tubing.
$6.59 - $43.99
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.
$8.39 - $131.29
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.
$7.89 - $115.49
Transfer the clearest beer possible from first pint to last with the Super Sucker Filtered Racking Buoy! Stainless steel float allows you to pull liquid from the top of your vessel rather than transferring out from the bottom Sediment falls out of suspension over time, especially at cold temperatures, so the clearest beer is always at the top! 10 feet of tubing can be cut to your preferred length for both the pump inlet and outlet Made for use with the Super Sucker Transfer Pump The Filtered Racking Buoy kit allows you to transfer the clearest liquid possible with the Super Sucker Transfer Pump. Whether you're transferring beer or wine, the clearest liquid will always be at the top of the vessel as solids fall out of suspension and settle to the bottom over time. The stainless steel float will position your transfer tubing at the top of the liquid so you can pull from the top down and cease transferring when you get near the sediment. The filter attachment will add a layer of protection for the pump and will leave solids behind in your fermenter or storage tank. Includes: Stainless float (1.75" Ø) Filter attachment 10' length of 3/8" ID silicone tubing (3) hose clamps
$32.99
Digital flow-meter perfect for winemaking, beer making, cider making and more. Equipped with reset function, a cumulative totalizer reset, and a non-resettable totalizer. Calibration function to adapt the instrument to fill by gravity, or to fill with transfer pumps. Features: Capacity from 30L/7.9G to 130L/34.3G per minute Display changeable from liters to gallons Minimum pressure 0,3 bar, maximum pressure 16 ba 1" BSPP (straight thread) outlets (includes 1" barbs) Accuracy + -1% of indicated value after calibration Repeatability + – 0.3% Battery Powered Rated to a maximum temperature of 85 C°(185 f°) The 50C rating in the manual is a typo.
$319.99
Used primarily in aeration and oxygentation systems that call for 1/8" ID line. 3/16" OD.
$3.69 - $26.29
Heavy-duty hose clamp suitable for 1-1/4" to 2-1/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.
$2.99
Kink and crush resistant suction & discharge rubber hose, designed for demanding applications that require high temperature and chemical resistance ForgeFit barbed connector and crimp sleeve system are designed to provide a long life and easy to clean hose connection Hose barb skips the first barb to provide a gapless and smooth transition to the tubing Our sleeves are machined from pipe to meet sanitary standards, avoiding the uneven compression and hard points caused by welding, and offering a superior surface finish that is both more hygienic and visually appealing Novaflex Connoisseurs Beverage Hose Meets 3-A (cert# 1803), FDA & USDA standards Tubing sets made from ForgeFit fittings and Novaflex Connoisseurs food & beverage tubing that are assembled in the MoreBeer! Pro metal shop in Pittsburg, California. The options above are already assembled and ready to ship. If these options do not suit your needs, custom lengths can also be made to order. Novaflex is a special kink and crush resistant suction & discharge rubber hose, designed for those more demanding applications requiring a product that meets 3-A (cert# 1803), FDA & USDA standards. This tube is for non-oily applications. Designed to meet the temperatures and chemical resistance associated with “cleaning in place” systems. This ultra smooth microbe resistant tube is built on special stainless steel mandrels for cleanliness. The ForgeFit barbed connector and crimp sleeve system is designed to provide a long life and easy to clean hose connection. The long barb and the long sleeve provide a secure crimp without crushing the hose. Triple banding can slip or damage the hose during installation and has sharp edges. The ForgeFit® hose barb skips the first barb to provide a gapless and smooth transition to the tubing to make it easier to keep clean. Our barb has a stop to ensure the hose does not creep closer to the clamp in service. Don't forget to add hose bumpers to your order to protect your investment! The ForgeFit® Silicone Hose Bumper is designed to protect your hose ends by absorbing the impact of the hose end hitting the floor when it's dropped. The unique built in handle makes it easier to grab and saves your back. Novaflex Construction: Tube: White Chlorobutyl Reinforcement: Multiple plies of polyester tire cord & dual monofilament helix Cover: Gray EPDM abrasion resistant Temperature Range: -40° to 240°F (CIP to 248°F) Not for continuous steam service in. mm ID 1.5 38.1 OD 2.14 54.35 Bend Radius 4.5 114
$199.99 - $499.99
Replacement air tubes for variable capacity tanks. 50 cm tube fits Marchisio 100 - 200 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$47.49
Replacement air tubes for variable capacity tanks. 65 cm tube fits Marchisio 300-400 Liter tanks, and the wide format 200L tank. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$50.99
Kink and crush resistant suction & discharge rubber hose, designed for demanding applications that require high temperature and chemical resistance ForgeFit barbed connector and crimp sleeve system are designed to provide a long life and easy to clean hose connection Hose barb skips the first barb to provide a gapless and smooth transition to the tubing Our sleeves are machined from pipe to meet sanitary standards, avoiding the uneven compression and hard points caused by welding, and offering a superior surface finish that is both more hygienic and visually appealing 1" ID tubing is sometimes preferred to 1.5" as it is easier to handle and decreases product loss Novaflex Connoisseurs Beverage Hose Meets 3-A (cert# 1803), FDA & USDA standards Now selling tubing sets made from ForgeFit fittings and Novaflex Connoisseurs food & beverage tubing that is assembled in the MoreBeer! Pro production shop in Pittsburg, California. The options above are already assembled and ready to shop. Novaflex is a special kink and crush resistant suction & discharge rubber hose, designed for those demanding applications requiring a product that meets 3-A (cert# 1803), FDA & USDA standards. This tube is for non-oily applications. Designed to meet the temperatures and chemical resistance associated with "cleaning in place" systems. The ultra smooth microbe resistant tube is built on special stainless steel mandrels for cleanliness. The ForgeFit barbed connector and crimp sleeve system are designed to provide a long life and easy to clean hose connection. The long barb and the long sleeve provide a secure crimp without crushing the hose. Triple banding can slip or damage the hose during installation and has sharp edges. The ForgeFit hose barb skips the first barb to provide a gapless and smooth transition to the tubing to make it easier to keep clean. Our barb has a stop to ensure the hose does not creep closer to the clamp in service. Don't forget to add hose bumpers to your order to protect your investment! The ForgeFit® Silicone Hose Bumper is designed to protect your hose ends by absorbing the impact of the hose end hitting the floor when it's dropped. The unique built in handle makes it easier to grab and saves your back. Novaflex Construction: Tube: White Chlorobutyl Reinforcement: Multiple plies of polyester tire cord & dual monofilament helix Cover: Gray EPDM abrasion resistant Temperature Range: -40° to 240°F (CIP to 248°F) Not for continuous steam service in. mm ID 1 25.4 OD 1.64 41.65 Bend Radius 3.5 88.9
$179.99 - $459.99
Replacement air tubes for variable capacity tanks. 80 cm tube fits Marchisio 500-700 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$53.99
Replacement air tubes for variable capacity tanks. 120 cm tube fits 120 cm diameter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$70.99
ForgeFit's rubber hose bumper is the ideal choice for brewery hose ends. Rather than being made from rigid plastic, the soft silicone is designed to absorb impact and help protect hose end fittings that are being continuously picked up and dropped to the floor. The bumper will also keep the hose ends raised off the floor to keep the fittings sanitized and avoid contamination. The two large handles allow you to pick up a hot hose without grabbing onto it directly. This bumper requires some forceful stretching to get over the 1.5" TC fitting. 1.49" ID to stretch over most 1" brewery hoses.
$24.99
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Replacement air tubes for variable capacity tanks. 75 cm tube fits LA Inox 600 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$52.99
Replacement air tubes for variable capacity tanks. 100 cm tube fits Marchisio 1000-2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$62.99
Replacement air tubes for variable capacity tanks. 90 cm tube fits LA Inox 800-1000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$52.99
Replacement air tubes for variable capacity tanks. 125 cm tube fits LA Inox 2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$70.99
Replacement air tubes for variable capacity tanks. 115 cm tube fits LA Inox 1850 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$69.99
Premium Bromobutyl Lining for Flavor Purity: Engineered with high-performance Bromobutyl that is more inert than standard Chlorobutyl, ensuring a neutral, odor-free transfer with no "break-in" period or rubbery off-flavors. Ultimate Oxygen Barrier: Protects your beer’s shelf life and delicate aromatics with a superior gas permeability barrier that outperforms EPDM and Chlorobutyl to prevent oxygen ingress. High-Heat & Steam Resilience: Built to withstand the rigors of professional sanitation, handling continuous CIP cycles up to 225°F and intermittent steam sterilization up to 248°F. Crush-Resistant & Rugged Construction: Features a high-tensile monofilament helix to prevent kinking in high-traffic cellars, wrapped in an abrasion- and ozone-resistant EPDM outer cover. Hygienic, Microbe-Resistant Bore: The ultra-smooth internal bore prevents biofilm buildup and is designed for gapless integration with ForgeFit® crimped tri-clamp fittings to ensure a sanitary flow. ForgeFit® Blue Steel Brewery Tubing The Ultimate Bromobutyl Performance for Professional Brewing Elevate your cellar operations with ForgeFit® Blue Steel, the premium brewery hose engineered for brewers who refuse to compromise on flavor integrity and oxygen control. While many standard hoses rely on Chlorobutyl linings, Blue Steel is crafted from high-performance Bromobutyl—setting a new benchmark for durability, purity, and protection. Why Bromobutyl? The "Blue Steel" Advantage The choice of lining material is the difference between a good beer and a world-class one. Here is how our Bromobutyl lining outperforms the industry-standard Chlorobutyl: 1. Neutral Flavor Profile from Day One Chlorobutyl hoses often require a rigorous "break-in" period or chemical soaks to remove lingering rubbery odors. Bromobutyl is inherently more inert and neutral. With Blue Steel, you get a clean, odor-free transfer immediately, protecting your beer from unwanted "off-flavors" or leachables. 2. Higher Temperature Resilience for CIP Bromobutyl’s unique chemical structure allows it to withstand higher temperature spikes compared to standard Chlorobutyl. While common linings might soften or degrade over 200°F, Blue Steel is designed to handle continuous CIP cycles up to 225°F and intermittent steam sterilization up to 248°F. 3. Superior Oxygen Barrier Beer’s greatest enemy is oxygen. Bromobutyl offers significantly lower gas permeability than both EPDM and Chlorobutyl. This creates a near-impenetrable wall against O2 ingress during transfer, ensuring your delicate aromatics and shelf life remain exactly as intended. Comparison at a Glance Feature Chlorobutyl (Standard) Bromobutyl (Blue Steel) Oxygen Permeability Low Ultra-Low Odor/Flavor Transfer Minimal (requires break-in) Zero (Neutral) Max Temp (CIP) ~200°F - 212°F Up to 248°F Chemical Stability Good Excellent Flexibility High Superior Kink Resistance Product Features Ultra-Smooth Bore: Specialized microbe-resistant tube prevents biofilm buildup and simplifies sanitation. Kink & Crush Resistant: Reinforced with a high-tensile monofilament helix for maximum durability in high-traffic brewhouses. Rugged Outer Cover: The signature "Blue Steel" EPDM cover is abrasion, ozone, and chemical resistant—built to survive the wet, high-drag environment of a production cellar. Sanitary Integration: Perfectly matched with ForgeFit® crimped tri-clamp fittings for a gapless, hygienic transition. Blue Steel Construction: Inner Layer: Food-grade Bromobutyl Rubber (White) Outer Layer: Anti-aging Bromobutyl Rubber (Blue) Reinforcement Layer: High-strength synthetic cord + helical steel wire reinforcement Temperature Range: -40° to 248°F Max. Temperature for Steam Cleaning: 275°F (30 minutes*) *Not for continuous steam service Operating Pressure: 150 psi Inner Diameter: 1.5" (38mm) Outer Diameter: 2" (52mm) Bend Radius: 2.95" (75mm) Certifications: FDA 21 CFR 177.2600
$143.99 - $539.99
We and our partners, including Shopify, use cookies and other technologies to personalize your experience, show you ads, and perform analytics, and we will not use cookies or other technologies for these purposes unless you accept them. Learn more in our Privacy Policy
