Wine Making

Mignon filling nozzle for the Ultrafiller 2 & 4. With a diameter of only 0.31" (8mm), this nozzle preferred for filling the smallest bottles and well suited for use with oil or spirits.

Read more less

Replacement O-ring for Ultrafiller standard nozzles and pomodoro nozzles.  

Read more less

Standard tank kit for the Ultrafiller 1. Includes pyrex void tank and gaskets.

Read more less

Prevents vacuum pump failure when bottling sugary or hot products by effectively filtering impurities.   Comes with pre-assembled tubes and adapters for quick and hassle-free setup; designed for vertical mounting.   Built to withstand prolonged use in dusty environments, with a metal mesh filter element and easy-to-clean components.   When using the Ultrafiller to fill liqueurs, spirits, syrups, or other sugary products—as well as hot products such as juices—it is essential to equip the machine with the oil bath filter. This filter protects the vacuum pump, which could fail over time without proper filtration. Please note that the oil bath filter is not included with the Ultrafiller and must be purchased separately. Important: Failure to use this filter when bottling the above-mentioned products will void the warranty for the bottling machine. Mounting Instructions  Before using the filter, fill the cup with food-grade mineral oil up to the indicated level. Medium-density oils are recommended for optimal performance. Install the filter between the vacuum pump and the recovery tank. The kit includes pre-assembled tubes and hose adapters for your convenience. Always mount the filter vertically: Connect the OUT port to the pipe leading from the motor.   Connect the IN port to the pipe and quick-release fitting supplied with the tank. (Refer to the detailed instructions for further guidance.) Maintenance  These filters are designed for prolonged use, even in dusty environments, offering excellent filtration and durability. To maintain optimal performance:  Regularly change the oil, ensuring the level remains at the indicated mark.   Remove impurities that accumulate during operation.    For particularly dusty conditions, disassemble and wash the lower parts of the filter daily. Materials  Painted sheet metal container  Metal mesh filter element  Operating temperature range: 32°F to 197°F    

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve.  As the wine level drops in the reservoir the pump is turned on to refill.  Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour.  If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning.  The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4"  casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D 110V Please note: The integrated pump is hardwired into the panel. It cannot be disconnected and used separately as it appears in the photo.

Read more less

Built-in self-priming diaphragm pump is non-aerating & gentle on your wine Flow stops automatically at the preset fill level Adjustable shelf to accommodate a wide range of bottles Optional gas flush system & variable flow control Made to order in the United States If you're looking for a fast, gentle, reliable, professional quality fill for your wine, then this is the filler for you. Hand-made to order by XpressFill in southern California, these fillers represent the very best available to winemakers. This filler features a built-in self-priming diaphragm pump to draw your wine from your tanks or barrels up to the filler. The action of the diaphragm pump is non-aerative and gentle, and it has the capability of pulling your wine from quite a distance away. The nozzles on XpressFill's Level Filler are independently actuated by microswitches when a bottle is put in place for filling. Flow stops automatically at the preset fill level. This makes it easy to put half the bottles on for filling and take the other half off for corking without having down time in between. The bottle shelf is adjustable in height to accommodate a wide range of bottles. Fills approximately 400 bottles/hr. Add the optional Gas Flush System and the filler will automatically gas-purge your bottles prior to filling. There is no additional button to push or lever to flip, the filler handles it all! Features: Made To Order In USA Built-in self-priming diaphragm pump Diaphragm pump is non-aerating & gentle on your wine Nozzles are independently actuated by micro-switches Flow stops automatically at the preset fill level Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling 4 Spout fills approximately 400 bottles per hour  

Read more less

Replacement lower support flange for the Marchisio Upright Foil Spinner.  

Read more less

Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the interior of the labeling machine. For the exterior roller mount, see here. KegLand Part Number: KL88925

Read more less

Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the exterior of the labeling machine. For the interior roller mount, see here. KegLand Part Number: KL88925

Read more less

Replacement Enolmatic Pump P.15 Complete 110v  

Read more less

Compatible with WE369C, WE369E, WE369F.

Read more less

Replacement Gasket Set for EnoItalia Vacuum Wine Bottle Filler. Includes: (1) Pos. 10 (1) Pos. 4 (2) Pos. 2

Read more less

Replacement Gasket Pos. 10.

Read more less

Pos. 9 Nozzle Tip for WE680 Vacuum Wine Bottle Filler. See attached instruction manual for diagrams.

Read more less

WineStix Segments are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These WineStix Segments feature a Toast Blend of 40% Medium, 40% Medium Plus and 20% Dark toasted stave. One 1 lb/490 grams treats approximately 100 gallons of wine. Due to careful aging and seasoning of the American Oak and a precise toasting, WineStix offer specific flavors and aromas that add character to your wine! Please Note: Allow 2 months extraction time to balance the extractions of short and long grain. This is our fastest extraction. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the WineStix® milling. The end result is in likeness to a second use Barrel.

Read more less

Auto Buret Self Zeroing - 10 ml. Buret and reagent bottle only, does not include the stand or clamp.

Read more less

Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 140cm - 160cm in diameter. Installs two feet per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up. Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.

Read more less

Installation of Levelling Feet on a Speidel Tank. Levelling Feet can be used to orient a tank into a perfectly vertical position even though it is in place on sloped floors. This option is for round tanks 100cm - 120cm in diameter. Installs one foot per leg of the tank. Feet are adjustable by hand and then set in position with a locking nut and crescent wrench - easy and fast to set up. Please Note: Purchasing this item installs an optional feature on a Speidel Tank. This item cannot be purchased independently, and must be purchased on the same invoice as the tank it is to be installed on to ensure accurate manufacturing.

Read more less