Wine Making Hardware

Dual Functionality: Acts as both a stopper and an airlock, allowing CO2 to escape while preventing oxygen and contaminants from entering, ensuring optimal fermentation conditions. Versatile Fit: Compatible with a wide range of containers, including 3, 5, 6, and 6.5-gallon carboys, 1-gallon bottles, growlers, and 500 mL flasks, replacing multiple stopper sizes. Ideal for Wine and Beer Ferments: Breathable stoppers are a popular choice in commercial wineries and perfect for beer fermentation, it creates a vacuum if the wort cools, preventing contamination from water airlocks. A breathable Silicone stopper that acts as both a stopper and an airlock. Unique design allows CO2 pressure to escape but keeps Oxygen and airborne contamination out. This quickly became our stopper of choice for wine, and is a popular style used by numerous commercial wineries. Also has great application for beer ferments: It will create a vacuum if fermenting wort cools (as opposed to pulling water in from your traditional airlock.) Airtight seal is great for extended fermented lager when CO2 production is still present but very slight. Fits 3, 5, 6 & 6.5 gallon glass carboys, 1 gallon bottles, growlers, and 500 mL flasks. Replaces Stopper Sizes #6, #6.5, #7, #8 Stopper Measurements: 0.94" x 1.48" (24 mm x 37.5 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Universal Breathable Bung and the Breathable Barrel Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.

Read more less

This is a replacement stopper for our Counter Pressure Bottle Fillers. This will work with both KEG801 & KEG804. Stopper - #2.5 with 3/8" hole.

Read more less

Stainless lock nut. 1/2" FPT

Read more less

Give yourself added peace of mind by using this high temp tubing on the hot side of your brewing system.   When compared with traditional silicone, EJ Beverage High Temp tubing is less likely to kink at higher temperatures. It is made of TPE (Thermoplastic Elastomer) which is an excellent alternative to high temperature PVC and Silicone.     The advantages of this high temp tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 1/2” ID x 3/4” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 63 psi Working pressure of 21 psi  

Read more less

Stepless clamps are the best choice for your home draft set up. Standard worm drive hose clamps are nice for reusability, but they aren't ideal for beer and gas lines because they tend to pinch on one side, leading to leaks or degraded pressure holding capacity of your draft system. Stepless clamps apply even compression around the whole diameter of the tubing line, tightening in a perfect circle. They can be tightened with the middle cutter on a pair of pliers, or better yet, with the Stepless Clamp Tool (H1006). For tubing with 1/4" outer diameter (6-8 mm OD) Stainless steel Pack of 20 Kegland Part Number: KL06675

Read more less

Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL11921

Read more less

Reinforced vinyl tubing is a great option for transferring your homebrewed beer. This food grade 3/8 in ID Reinforced Vinyl Tubing is rated to 158 degrees F, and 40 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is useful in your setup where you want extra tubing strength, but your system pressure won't exceed 250 psi.  

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 3" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

#8 stopper - with 3/8 inch hole. Top diameter 1.59 inches (40.5 mm), bottom diameter 1.31 inches (33 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).

Read more less

This fitting allows you to change a 1.5 in. TC to a 1/4 in. flare. The 1/4 in. flare is compatible with a standard swivel nut for draft lines making it an easy way to transfer to kegs!

Read more less

End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. They're also great for capping butterfly valves when they won't be used for a while. Give your butterfly valve a quick spray with Alpet or Star San, then cap it off to ensure the interior space remains sanitary until the next time you use the valve. For 2" tri-clamp fittings Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

This stainless steel ball valve is the perfect match to most homebrewing kettles with a 1/2" coupler or nipple on the bottom.  The 3-piece design makes it easy to take apart and keep clean, preventing any spoilage organism from lingering between batches.  It has a 1/2" FPT inlet and outlet.

Read more less

If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valves have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The plastic handle can be rotated 180° for right or left hand operation. 1.5" tri-clamp Plastic handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

#6 stopper - solid. Top diameter 1.25 inches (32 mm), bottom diameter 1.03 inches (26 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. Max. Temperature Rating: 158 °F (70 °C).

Read more less

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.

Read more less

If your conical doesn't feature a dedicated sample port, pulling samples from your fermenter can be pain. You're likely forced to pull samples from your racking valve and don't have a way to control flow. With a butterfly valve and this plunger-style sample valve, you can do just that. Attach to your butterfly valve and open it all the way, then slowing open the sample valve to cleanly pour a sample. 1.5" tri-clamp 1/2" barb Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 4" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Male Garden Hose Thread on one side, 1/2" OD Barb on the other. Useful for setting up your wort chiller and water filter.

Read more less

Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 10.5" allowing you to draw from roughly 8" above or below the valve level. The arm measures 9.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. 1.5" tri-clamp Polished finish Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Wooden Keg Bung. 1 27/32".    

Read more less

Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.

Read more less

EJ Beverage High Temp tubing is perfect for use on the hot side of your brewing system.  When compared with traditional Silicone this tubing is less likely to kink at higher temperatures. It is constructed of TPE (Thermoplastic Elastomer), which is an excellent alternative to high temperature PVC and Silicone.  The advantages to this high temperature tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 3/8” ID x 5/8” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 54 psi Working pressure of 18 psi  

Read more less

#11 stopper - with 3/8 inch hole. Top diameter 2.17 inches (55 mm), bottom diameter 1.89 inches (48 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).

Read more less

Size 1 1/2" - 1 13/16" To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole.

Read more less

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 4" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

#2 stopper - solid. Top diameter 0.83 inches (21 mm), bottom diameter 0.63 inches (15.8 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet.  Max. Temperature Rating: 158 °F (70 °C).

Read more less

Female Garden Hose Thread on one side, 1/2" FPT on the other. Useful piece for adapting Quick Disconnects to Wort Chillers or Water Filters.

Read more less

Teflon gaskets have the widest temperature range but they can be harder to get a good seal when compared to silicone and EPDM. Teflon gaskets are primarily used where the fitting may need to be rotated in place, such as a rotating racking arm. For 2" tri-clamp fittings Made from Teflon Temperature rated from -100°F to 500°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

#5 1/2 natural latex rubber stopper with 3/8 inch hole. Also called a size 5.5.   Size: 0.94 - 1.1 inches To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole.

Read more less

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 3" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 4" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this barbed fitting to connect 3/4" ID tubing to a 1.5" tri-clamp fitting. 1.5" tri-clamp 3/4" OD barb 3/4" long barbed section 1-1/8" long stem Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Our mini and medium 2-piece airlocks are a great option when a single inch could make or break fitting your carboy into a fermentation chamber. The airlock breaks down into 2-pieces for easy cleaning. Instead of a floating center piece, like standard 3-piece airlocks, the center piece is molded into the lid. One less piece to clean and misplace! Another cool feature of this 2-piece airlock is that 1/2" ID tubing will fit onto the center post for use as a blowoff.  This can be handy if you have a really active ferment that is blowing out the top of your fermenter. Holds approximately 0.67 fl oz (20 ml) Chamber - 1-5/8" tall x 1-3/4" diameter Stem - 1-1/4" long Stopper not included

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this barbed fitting to connect 1" ID tubing to a 1.5" tri-clamp fitting. 1.5" tri-clamp 1" OD barb 1.5" long barbed section 2" long stem Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.  

Read more less