Fittings & Valves

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 1.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 1.5" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

If you’re a beermaker who focuses on maintaining a sanitary brewing setup, you will like the advantages of using tri-clover connects any place you need to attach tubing to equipment. They make a sanitary connection that is designed to be cleaned in place.The straightforward design makes them easy to clean because there are no pockets or moving parts for bacteria to get stuck in. They make a very sturdy connection that doesn’t leak. Each connection requires a gasket and a clamp.    Product Specifications Stainless Steel 1/2 in., 1.5 in. Tri-Clamp Connection Converts 1.5" Clover to 1/2" Barb for connecting 1/2" ID Tubing.

Read more less

This Stainless Steel MPT barb will connect any tubing with a 3/8" ID line to any fitting with a 1/2" FPT connection. Most commonly used to connect tubing to a ball valve. Great for brewers who want to upgrade the fittings in their brewery to stainless steel. A high quality fitting with no sharp burs around the edges.   Made from 304 Stainless Steel.

Read more less

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!

Read more less

304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve.  TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.

Read more less

End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. They're also great for capping butterfly valves when they won't be used for a while. Give your butterfly valve a quick spray with Alpet or Star San, then cap it off to ensure the interior space remains sanitary until the next time you use the valve. For 1.5" tri-clamp fittings Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing.  Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this fitting to convert 1.5" tri-clamp to 1/2" male pipe thread or vice versa. If your boil kettle features 1/2" FPT ports, this fitting will allow you to attach a tri-clamp ball valve or butterfly valve. 1.5" tri-clamp 1/2" MPT 1/2" long threaded section Flat sides for easy tool adjustments Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 2" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.

Read more less

With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup.   304 Stainless, 1/2" Female Pipe Thread on all three openings.   2" length x 1.5" width

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this fitting to convert 1.5" tri-clamp to 1/2" female pipe thread. If your pump head comes with 1/2" MPT fittings, you can use this fitting to adapt the inlet and outlet to T.C. connection. Or adapt a boil kettle with 1/2" MPT ports to use a tri-clamp ball valve or butterfly valve. 1.5" tri-clamp 1/2" FPT Hex nut end for easy tool adjustments Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Brass fitting with 1/4" flare to 1/4" MPT.

Read more less

1/2" Female thread on one side and 1/2" male thread on the other. Called a street elbow because of the female threads on one side and the male threads on the other. Made from 304 type Stainless Steel.

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

If you’re a beermaker who focuses on maintaining a sanitary brewing setup, you will like the advantages of using tri-clover connects any place you need to attach tubing to equipment. They make a sanitary connection that is designed to be cleaned in place.The straightforward design makes them easy to clean because there are no pockets or moving parts for bacteria to get stuck in. They make a very sturdy connection that doesn’t leak. Each connection requires a gasket and a clamp.    Product Specifications Stainless Steel 3/8 in., 1.5 in. Tri-Clamp Connection Converts 1.5" Clover to 3/8" Barb for connecting 3/8" ID Tubing.

Read more less

A stainless steel nipple used to combine two fittings with 1/2" FPT threads.  There is a 1/2'' space between threads.

Read more less

Useful piece for connecting tubing to a Wort Chiller. Female Garden Hose on one side, with a 1/2" OD barb for tubing on the other side.

Read more less

For Insertion into a ball valve for connecting 1/2" ID line. Made from 304 type stainless steel.   Please note: If using 1/2" ID vinyl tubing, we recommend using hot water to heat the tubing up for easier insertion. Not recommended for use with thick wall 1/2" vinyl tubing. 

Read more less

Teflon gaskets have the widest temperature range but they can be harder to get a good seal when compared to silicone and EPDM. Teflon gaskets are primarily used where the fitting may need to be rotated in place, such as a rotating racking arm. For 1.5" tri-clamp fittings Made from Teflon Temperature rated from -100°F to 500°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 3" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

This tee fitting features 1.5" tri-clamp connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.5" long x 3.75" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still. Kegland Part Number: KL10979

Read more less

Useful piece for connecting tubing to a Wort Chiller. Female Garden Hose on one side, with a 3/8" OD barb for tubing on the other side.

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this barbed fitting to connect 1/2" ID tubing to a 1.5" tri-clamp fitting. 1.5" tri-clamp 1/2" OD barb 3/4" long barbed section 1-1/8" long stem Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

This elbow fitting features 1.5" tri-clamp connections at both ends and is made from high-quality stainless steel. 1.5" tri-clamp 90° bend 3.75" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 2" tri-clamp fittings Made from Silicone Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Used to connect two tri-clamp fittings together to make a sanitary connection. 304 stainless steel. For 2" tri-clamp fittings.  

Read more less

Monitor fermentation activity in a stainless steel conical Check flow and liquid clarity during transfers Harvest yeast and store with end caps Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 1.5" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch. 1.5" tri-clamp Approximately 6.25" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Adapt any 2" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 2" T.C. to 1.5" T.C. 1.5" x 2" tri-clamp 3" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Stainless lock nut. 1/2" FPT

Read more less

Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL11921

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 3" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

This fitting allows you to change a 1.5 in. TC to a 1/4 in. flare. The 1/4 in. flare is compatible with a standard swivel nut for draft lines making it an easy way to transfer to kegs!

Read more less

End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. They're also great for capping butterfly valves when they won't be used for a while. Give your butterfly valve a quick spray with Alpet or Star San, then cap it off to ensure the interior space remains sanitary until the next time you use the valve. For 2" tri-clamp fittings Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less