Wine Making

Wine Making Equipment

Wine making equipment comes in many different sizes, meaning you don't have to be a commercial winery to make quality wine at home! We carry everything you need for the wine making process: Crusher-destemmers for crushing your grapes, basket & bladder presses to press the juice out of the grapes, fermenters, storage tanks, and wine barrels for the aging process, and all the wine testing equipment you could possibly need to make sure your wine's numbers are always right where they should be.

Of course, when you're all done making the wine, you'll need to get it into bottles so that you're able to share it with your friends and family! Don't worry, we also offer all of the required wine bottling equipment for filling, corking, and even dressing your finished product.

EnoItalia Universal Tank Mixer | Stainless Steel Mixing Rod | 1 HP | 1400 RPM | 220V Single Phase

This universal mixer is perfect for any large scale mixing you need. The mixer allows installation and disassembly on full tanks without loss of liquid or use of tools! Requires that you have 2" Tri-Clamp Ball Valve installed on your mixing port. Once the mixer is connected to the ball valve, the valve is opened and the adjustable shaft slides through into the wine. You can also pump chemicals straight through the mixer into your tank which helps prevent contamination and simplifies the mixing process. This version does not come with the stainless steel trolley. Features: All parts in contact with the liquid are made of stainless steel AISI 304 1400 RPM 1hp/.75 kw motor 220v Single phase power required Rod length 650 mm Width 155 mm propeller 2" Tri Clamp

Read more less

$2,304.99
Marchisio Wine Bottle Filler | 3 Spout | Stainless Steel | 9L Reservoir
1 review

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir. The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir. 16.5" L x 16" W x 21.25" H Nozzle diameter: 12 mm (0.472441 inch)

Read more less

$824.99
Wine Cooling Plate | Stainless Steel | Weldless | 31.5 in. x 14.5 in.

Cool your fermenting must or wine using this weldless, easy-to-install, 304 stainless steel cooling plate that can be inserted into the lid of any Variable Volume Fermenter. Cold water or glycol is recirculated through the cooling plates thereby reducing the temperature of your ferment. This is a stainless steel setup, ensuring no chance of off-flavor in your wine. You drill two 1-1/16" to 1-1/8" holes into the lid. We provide two gaskets and a lock nut to seal on both sides of your lid, securing the plate in place. Plate measures 31.5" H x 14.5" W Inlet and Outlet 1/2" Male BSPP thread 300 mm long tubes Bulkheads located approx. 175 mm above the plate 0.64 Square meters of cooling surface Made from 304 stainless steel

Read more less

$364.99
Wine Cap Punch Down Tool w/ Handles | Stainless Steel | 72 in. Long | 12 in. Diameter
1 review

Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed ends for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 7lbs. Shipping weight is calculated at 70 lbs because these ship at FedEx oversize 2 rates. 72" Height

Read more less

$274.99
Wine Cooling Plate | Macro Bin | Stainless Steel | Weldless | 40 in. x 14.5 in.
1 review

A custom fabricated 304 stainless steel cooling plate for Macro Bins designed specifically for MoreWine!. The plate hangs in place by the inlet/outlet pipes and is held in the center of your bin. 40" wide x 14.5" tall, yields 0.37 square meters of cooling surface. 1/2 inch MPT threaded inlet and outlet. Please note that the illustration shown is for demonstration purposes only and is not to scale.

Read more less

$409.99
EnoItalia Jolly 40 Crusher Destemmer | Electronic Speed Control | Stainless Steel | 2.5 HP | 230V Single Phase

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Variable speed, motorized unit offers a precise level of control when processing grapes Stainless steel construction throughout Adjustable rubber rollers can be removed in order to destem whole grapes Collection tank with auger feed pushed crushed grapes to an awaiting must pump, or can be removed for gravity feeding 3 tons per hour processing capacity Made in Italy by EnoItalia A great machine for the small winery who is seeking a gentle processing but wants to avoid a high price tag. This is the only machine on the market near this price point that allows you this level of flexibility. The most important feature is variable speed control, via a built in electronic frequency drive, that allows you to slow down or speed up to best adjust the machine to the fruit you are processing. The second key feature is an adjustable rubber roller assembly that can be removed when destemming only is preferred. The reception hopper can be connected to a rubber impeller must pump for an affordable must moving solution or can be removed to allow other ways of moving the must. The Collection Tank The collection tank, located at the bottom of the machine, consists of a stainless bin with a stainless auger feed that is driven by the machine. It pushes crushed grapes into your awaiting rubber impeller must pump where the must is moved into your fermenter. However, you can remove the collection tank altogether, allowing the must to drop via gravity, which allows you to do one of two things. First you have the option to wheel in a true commercial quality eliptical must pump, such as the Enotialia Gamma 80, designed for commercial crush pads. Eliptical must pumps are big pumps with 3" outlet tubing that allows for a gentler transfer and are also better for dry (small berry, less flesh) fruit. The Gamma 80 is the smallest version of a true must pump, perfectly suited for this machine. A second option if you remove the reception hopper is to just allow the fruit to drop via gravity into containers and transfer that manually to macrobins. Of course the latter option is only feasible with a strong back and very small lots, but sometimes that is a nice option to have. The collection tank has a feed outlet on both sides. The side you are not using will need to be capped with a 2.5" end cap, clamp and gasket which are not included. Removable Rollers The rollers can be unbolted and removed from the machine, allowing for destemming only. It is a nice option to have for some fruit types you may choose not to crush. Limitations If you are consistently doing late harvest grapes with dry stems you should choose the Jolly60 over the Jolly 40. If you are running large volumes we really recommend you choose the Jolly 60. The standard basket is not ideal for processing Muscadine grapes. Features: 304 Stainless Steel Construction Process up to 3 tons per hour 230V 1 phase 2.5HP Motor Variable Speed with Frequency Drive Removable Rubber Rollers Rubber Rollers are spring loaded and can be adjusted Rubber Tipped Destemming Paddles 24mm holes in destemming basket Rubber Edged Auger in Reception Hopper Collection Hopper, with 3" TC outlet, can be removed Semi-Centrifugal - Basket does not rotate Casters, 2 of which lock Easily removed destemming basket and shaft for easy cleaning Destemming basket features 24mm holes Weighs 265 pounds Approximate dimensions of 52" x 28" x 53.5" Manufactured by Enoitalia Unit comes with bare cord wire. Wire on the appropriate 220v plug for your electrical connection Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

$9,104.99
Low stock!

Marchisio Fruit Press | Bladder Press | Hydro Press | Stainless Steel | 450L

High-capacity, commercial-grade stainless steel fruit press Bladder press offers an effortless process that is more efficient and gentler on the fruit Can be used with any standard garden hose and water supply that provides at least 36 psi of pressure Rotating basket allows for easy disposal of the pressed grapes Mounted to welded frame with rolling casters for smooth mobility around the winery Made in Italy by Marchisio Bladder presses offer a gentler yet more efficient press with less operator effort and the ultimate in press-control. You will extract more juice and less tannins. Attach a standard garden hose to the included hose fitting. Water fills up the interior rubber bladder which expands and presses the grapes against the outer stainless steel screen. 35 p.s.i water pressure (2.5 bar) is the maximum pressure you would need to operate. Two sleeves are provided with the press. One a mesh sleeve is placed inside the press and the other is an outer plastic sleeve that is placed over the top of the press to keep the pressed fruit from squirting out. After pressing, the entire stainless basket rotates and the inner mesh sleeve can be pulled out with most of the pressed grapes coming with it. We use this press in our own small production. A platform was built for the press to sit on so that when we rotate the basket we can dump directly into a macrobin. Use a Must Pump (PMP565) to pump fermented grapes up into the press. 118 gallon capacity (not including bladder.) Download the PDF FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.

Read more less

$14,519.99
Low stock!

EnoItalia Flexible Impeller Pump | Euro 20 | Stainless Trolley Cart | 4.4 GPM | 1.5 in. T.C. | 220V

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

$779.99
Low stock!

EnoItalia Jolly 100 Reverse Crusher Destemmer | Electronic Speed Control | Automatic Cleaning System | Stainless Steel | 13 tons/h | 220V 3 Phase

Independently controlled feeding hopper and destemming chamber Destemming chamber/basket with anti-tear design is gentle on grapes to reduce skin abrasion Unique chamber-mounted wiper cleanly moves destemmed grapes to the exit 13 tons per hour processing capacity Integrated washing system for quick cleanings between varietals or after an extended break Made in Italy by EnoItalia The Jolly 100 Reverse Destemmer from our partners at EnoItalia features three adjustable speed motors to allow for independent control of the feeding hopper, the destemming process, and the roller group. Along with adjustability in the destemming bar and then on gap setting in the sorting process you can really dial in the machine for your application. Jolly 100 Reverse EnoItalia's newest destemmer, the Jolly 100 Reverse is the ideal processing unit for smaller wineries looking for top-quality processing at an affordable price. The loading hopper features a mechanical speed variable motor so you can control the flow of grape bunches into the destemming chamber. The destemming bar and basket are separately controlled by a variable frequency drive that allows you to turn a dial to set the right speed. Separate control of these processes allows you to find the balance between speed and quality and helps the machine from being overloaded at either stage. The destemming chamber is made with a gentle anti-tear design to reduce grape skin abrasion. The holes in the basket are deep punched through thicker stainless steel, from the inside out, and then bead blasted to remove any sharp edges. The destemming bar features fingers with adjustable rubber tips to ensure a gentle touch on your grapes. The destemming chamber and the destemming bar move in opposite or "reverse" direction for best performance. The receiving hopper features perforated drainage holes to allow juice, sometimes found in the bottom of picking bins, to exit before entering the destemming chamber. There is a 1.5" hose barb for connecting tubing that runs into a collection bucket. That juice is most often discarded. Optional Accessories: The Jolly Reverse can be custom ordered with the below accessories. Contact our Sales Team today to inquire. Collection Tank with Central Screw & Motor - WE540 Larger Hopper for Macrobin use - WE541 Jolly 100 Reverse: 304 Stainless Steel Construction Process up to 13 tons per hour 220V 3 Phase 4HP Motor Variable Speed with Frequency Drive Rubber Tipped Destemming bars Centrifugal Destmming chamber rotates in reverse direction of destemming bar Unique chamber-mounted wiper blade cleanly moves grapes to discharge port Destemming chamber features 24mm holes Casters, 2 of which lock Easily remove destemming chamber/basket and shaft for easy cleaning Unit comes with bare cord wire. Wire on the appropriate 220V plug for your electrical connection Manufactured by EnoItalia Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

$17,999.99
Low stock!

Zeus Corker | Special 75 Floor Corker | Large Format Wine Bottle Corker | Ferrari

Small to large format bottle corker works for 375 mL up to 18 L bottles High-quality stainless steel construction throughout with heat-treated steel jaws 4 adjustable pivots to allow the use of corks with different heights and the use of champagne corks as well 6 adapters for different diameter bottle heads included Made in Italy by Ferrari The Zeus "Special 75" floor corker from Ferrari offers an exceptional range of bottle compatibility, accepting sizes ranging anywhere from 375ml to 18L. The adjustability of the Zeus is unmatched. Not only is it compatible with an extremely wide range of bottle sizes, it can be used with both standard and champagne style corks, and includes 6 adapters for different diameter bottle heads. If you're corking regular sized bottles and want the option to cork large format bottles as well, this is the corker for you! Compatible Sizes: Champagne Bottles: 375 ml to 15 L Bordolesi Bottles: 375 ml to 18 L All Bottles: Height Max 75 cm, Diameter Max 22.5 cm Features: Suitable for any bottle with maximum height 75 cm and maximum ø 22.5 cm Suitable for any cork with maximum height 60 mm and maximum ø 42 mm Head with heat-treated steel jaws 4 adjustable pivots to allow the use of corks with different heights and the use of champagne corks as well The pins slide on spherical bearings A pedal lever grants an easy positioning of the bottle 6 adapters for different bottle heads: external diameter from ø 28 mm to ø 50 mm Can be completely disassembled for easy maintenance Rotating anti-skid feet, suitable for any surface Back wheels for extra mobility Handle grip for easy transport Weight: 97.5 lbs 61" H x 20.5" W x 22.5" D

Read more less

$5,045.99
EnoItalia Jolly 60 Crusher Destemmer | Electronic Speed Control | Stainless Steel | 2.5 HP | 230V Single Phase

Variable speed, motorized unit offers a precise level of control when processing grapes Stainless steel construction throughout Centrifugal processing—destemming basket rotates to more efficiently remove stems Rubber coated wiper blade gently pushes grapes to the collection tank Collection tank comes with rolling casters for easy removal 6 tons per hour processing capacity Made in Italy by EnoItalia The bigger brother of our Jolly 40 Destemmer Crusher. The Jolly 60 features some key upgrades over the Jolly40 that allow for even more gentle processing. The Jolly 60 has a higher production, is quick to adjust and even more gentle on your grapes. We suggest you first take the time to read through the Jolly 40. Centrifugal Processing - the Jolly 40 features a non-rotating destemming basket where the grapes fall through and are moved to the collection tank via a stainless screw feed. The Jolly 60 features a basket that also rotates. This design is more effective at removing stems. It also has the benefit of using a spiral, rubber coated wiper blade welded to the basket that more gently pushes destemmed grapes to the collection tank. By comparison the Jolly40 uses a stainless screw under the basket to move grapes to the collection tank. Adjustable Rubber Tipped Destemming Shaft - Instead of rigid paddles on the Jolly40 the Jolly60 features adjustable tips that can help reduce jacks (bits of stems) in certain situations. Additionally the tips are cylindrical instead of paddle shaped. This an option we choose from the manufacturer and is not reflected in the photo. Processing Advantages Vrs. Jolly 40 Rollers slide out of way on stainless rails and do not have be disconnected like on the Jolly40 Collection tank is on casters for easier removal vrs being hard mounted on the Jolly40 50% higher processing capabilities vrs Jolly40 The Collection Tank & Must Pump Choice The collection tank, located at the bottom of the machine, consists of a stainless bin with a stainless auger feed that is driven by the machine. It pushes crushed grapes into your awaiting rubber impeller must pump where the must is moved into your fermenter. Rubber impeller pumps like the Enoitalia EURO 60 must pump will do a good job unless the grapes are dry (high skin, less flesh). The Euro 60 is also a good choice because it has so many other uses in the winery. You can remove the collection tank altogether, allowing the must to drop via gravity, which allows you to do one of two things. First you have the option to wheel in a true commercial quality eliptical must pump, such as the Enotialia Gamma 80, designed for commercial crush pads. Eliptical must pumps are big pumps with 3" outlet tubing that allows for a gentler transfer and are also better for dry (small berry, less flesh) fruit. The Gamma 80 is the smallest version of a true crush pad must pump, perfectly suited for this machine. A second option if you remove the reception hopper is to just allow the fruit to drop via gravity into containers and transfer that manually to macrobins. Of course the latter option is only feasible with a strong back and very small lots, but sometimes that is a nice option to have. Features: 304 Stainless Steel Construction Process up to 6 tons per hour 230V 1 phase 2.5HP Motor Variable Speed with Frequency Drive Slide out of the way Rubber Rollers Rubber Rollers are spring loaded and can be adjusted Rubber Tipped Destemming bars Rubber Edged Auger in Reception Hopper Collection Hopper, with 3" TC outlet, can be removed Centrifugal - Basket rotates Unique basket mounted wiper blade eliminates stainless screw feed Destemming basket features 24mm holes Casters, 2 of which lock Easily removed destemming basket and shaft for easy cleaning Control box can be easily unplugged and removed for wash down Weighs 400 pounds Approximate dimensions of 63"H x 33"W x 51.5"T Unit comes with bare cord wire. Wire on the appropriate 220v plug for your electrical connection 8.1 Amp draw at 230v Manufactured by Enoitalia Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

$11,757.99
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #25

Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 5-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #25 specifications: Basket diameter: 10 inches Basket height: 14 inches Basket capacity: 5 gallons Ship weight: 51 pounds Manufacturer: Fratelli Marchisio (Italy)

Read more less

$569.99
EnoItalia Roll-In Crush Pad Pump | Gamma 80 | Stainless Steel | 16,000 lbs/h | 220V 3 Phase

Wheeled crush pad pump rolls directly under the Jolly 40 or Jolly 60 Crusher Destemmer Stainless steel construction throughout Screw feed moves grapes to the elliptical must pump with 3" tri-clamp outlet Up to 16,000 lbs per hour processing capacity Made in Italy by EnoItalia A 3-Phase Crush Pad Specific must pump that transfers crushed grapes from your Crusher Destemmer to your tank or bin. Entire pump is on wheels and will slide under the Jolly 40 or Jolly 60 Crusher Destemmer. Grapes would fall into the awaiting stainless hopper. Stainless screw moves grapes into the eliptical, paddle style must pump that then moves them through 3" tubing to final destination. Considered more gentle than using a rubber impeller must pump. Only available in 3 phase power. Details: Power: 2.5 HP Three Phase 220 v draws 4.7 amps Capacity: 12,000 to 16,000 pounds per hour Shaft Speed: 47-58RPM Max Pressure: 7.2 PSI (0.5 BAR) Out Let Barb: 3" Tri-Clamp Max Discharge Height: 9 feet Max Discharge Distance: 30 feet Weight: 220 Pounds Pump Body: Stainless Steel Loading Hopper & Screw: Stainless Steel Refillable automatic lubricator Hinged discharge cone can be opened for inspection Single speed pump Please Note: This unit REQUIRES 220V Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

$8,239.99
Low stock!

Marchisio Wine Plate Filter | Noryl Plates | 20x20 | 40 Plate | Stainless Rolling Cart | 1,200L/h | 110V

Rolling cart wine plate filter Plates made from food-grade Noryl Built-in stainless centrifugal pump Built-in pressure gauge 1.5" tri-clamp inlet/outlet 1,200L/h wine filtering capacity Made in Italy by Marchisio Commercial plate filter featuring 41 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler. Features: 304 Stainless Steel Construction Four Casters for easy movement. Two of the casters have locks Built-in centrifugal stainess steel pump with on/off switch. 41 Food-Grade Noryl plastic plates included. Double filtration kit available Built-in pressure gauge Maximum pump pressure is 2.5 bar (35 p.s.i.) Up to 1200L (317 gal) Flow rate per hour 940x480x590mm/37x19x23 inches 114 lbs 1.5" Tri-Clamp inlet and outlet Pads should be placed in the machine rough-smooth-smooth-rough Minimum number of plates that can be used is 30

Read more less

$2,499.99
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #55

Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 45-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #55 specifications: Basket diameter: 22 inches Basket height: 65 inches Basket capacity: 45 gallons Ship weight: 375 pounds Manufacturer: Fratelli Marchisio (Italy)

Read more less

$2,069.99
Low stock!

Kreyer Centrifugal Humidifier | HumiFix 1 | 2,800 ft³/h Air Flow | 110V

Control the humidity of your cellar to prevent wine barrels from drying out Dry, non-humidified barrels will draw liquid to the outer surface where it evaporates, leading to significant product loss Can operate in environments as low as 34°F, making it ideal for cold rooms and storage halls Compact, stand-alone unit can be suspended from or mounted to a wall 2,800 cubic feet per hour air flow Made in Germany by Kreyer Humidity control in wine cellars plays a major role during the production, maturation and storage of wine and other beverages in wooden barrels. Wine barrels safe-guard the main asset of a winery – the wine itself. The wooden walls of dry, non-humidified barrels will draw liquid from inside it up through the small crevices to the outer surface where it evaporates. Over time, this leads to a significant amount of product loss. For example, a 225L wine barrel can lose 10-15% of the wine volume over one year. A professional humidification of the barrel room allows the barrel wood to absorb water-vapor, the crevices fill out and loss of wine is prevented. A well-kept barrel room is therefore cool, usually around 57-60°F and humidified at about 75% - 80% rH. As with every aspect of winemaking, attention and professional equipment are required. Low humidification may allow the wood to dehydrate and wine will evaporate through it, while overly high humidity can lead to mold and fungus. The centrifugal humidifier HumiFix is equipped with a spinning disk that vaporizes water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling a room at the same time. The unit can work either connected to your main water supply with inline cartridge filtration or more ideally to an RO unit. The HumiFix can work at low temperatures (down to 34°F), which is ideal for installation in cold rooms and storage halls. Features: Stand-alone unit Easy installation and handling Compact construction Wall or suspended mounting Specifications: Water Output: 1.0 L/h (0.26 Gal/h) Air Flow: 80 m³/h Power: 31 watts Power Connection: 110V/1Ph/60Hz Dimensions: 15.5" L x 12" W x 15.5" H Empty Weight: 10 lbs Please note: this unit comes with a bare cord so it can be hard wired to a controller. Otherwise we recommend attaching a 110V male plug and using it with the Inkbird Digital Humidity Controller.

Read more less

$1,759.99
Low stock!

EnoItalia Elliptical Rotor Pump | Gamma 180 | Crush Pad Pump | 25,000 lbs/h | 3 in. T.C. | 220V

Heavy-duty, elliptical rotor, roll-in crush pad pump Ideal pump for moving must or whole berries with little to no liquid Stainless steel pump body with 3" tri-clamp connections Hinged stainless door for inspection and cleaning Made in Italy by EnoItalia Gamma pumps are heavy duty, elliptical rotor, stainless steel pumps designed to move must from your destemmer to your fermentation tanks or bins. They are often referred to as Roll-in Crush Pad Pumps because they are on wheels and slide directly under your destemmer crusher. While rubber impeller pumps can be made to work for this purpose impeller pumps are not as good in situations where there is very little liquid. Examples would be when you are trying to process whole berries or processing very small berry cabernet sauvignon. Gamma pumps are also softer on the fruit than an impeller pump. Elliptical Crush pad pumps are professional solutions. The Gamma 80 works with either our Jolly40 or Jolly60 while the Gamma180 works with the Jolly100. Features: Stainless steel pump body Stainless Receiving hopper with screw 5.5 HP/4kW Motor Requires 3 phase, 220v, 60 Hz Power Up to 25,000 lbs/12,000kg pumped per hour Max Pressure: 21.7 PSI (1.5 BAR) Shaft speed: 47/58 rpm 3 in Tri Clamp connection fitting Up to 15 ft / 4.5 m discharge height Up to 90 ft / 27.4 m discharge distance Hinged stainless door for inspection, cleaning Automatic refillable lubricator Please Note: This unit REQUIRES 220V Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

$11,064.99
EnoItalia Motorized Apple & Pear Crusher | Fruit Shredder | Stainless Steel | 1.5 HP | 110V

Process apples, pears, and other non-pitted fruit Stainless steel construction throughout Easily disassembles for cleaning after use Made in Italy by EnoItalia A motorized shredder for use with apples, pears or any other fruit which needs processing before it can be pressed for its juice. Not for use with peaches, cherries or other pitted fruits. To use, fruit is fed into the hopper at the top of the machine, where it falls on to spinner cutter blades which shred the fruit. The mash is then pushed out of the machine and into your waiting bucket where it can then be transferred to the press. Extremely simple to operate, and safe since the cutting blades are buried deep in the machine during operation. Sturdy, all stainless steel construction means that you know this machine will last you for years and years. Simple disassembly for cleaning. Runs on standard 110V power with a 1.5HP Motor. We tested this shredder ourselves and found that because it is only 110V, you have to feed the fruit in slowly and consistently. If you have access to 220V power, we recommend our WE208 crusher, which can hold more fruit at once and crush more fruit per hour.

Read more less

$1,759.99
Cooling Snake | 8.0 Meters | 1.2 m² Surface Area

A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. 1.2 Square Meters of Cooling Surface Can also be used for heating Optional silicon sleeve available for sealing

Read more less

$494.99
Low stock!

Bladder Press | Hydro Press | Stainless Steel | 300L | Grapes | Fruit

High-capacity, commercial-grade stainless steel fruit press Bladder press offers an effortless process that is more efficient and gentler on the fruit Can be used with 3/4 hose and water supply that provides at least 36 psi of pressure Rotating basket allows for easy disposal of the pressed grapes Mounted to welded frame with rolling casters for smooth mobility around the winery Made in Italy by Marchisio Bladder presses offer a gentler yet more efficient press with less operator effort and the ultimate in press-control. You will extract more juice and less tannins. Attach your water supply line to the 3/4" barbed water inlet at the base of the unit. Water fills up the interior rubber bladder which expands and presses the grapes against the outer stainless steel screen. 35 p.s.i water pressure (2.5 bar) is the maximum pressure you would need to operate. Two sleeves are provided with the press. One a mesh sleeve is placed inside the press and the other is an outer plastic sleeve that is placed over the top of the press to keep the pressed fruit from squirting out. After pressing, the entire stainless basket rotates and the inner mesh sleeve can be pulled out with most of the pressed grapes coming with it. We use this press in our own small production. A platform was built for the press to sit on so that when we rotate the basket we can dump directly into a macrobin. Use a must pump to pump up into the press. In each press load we do approximately 110 gallons of red wine must (letting free run on through) which works out to be about 3/4 of a macrobin. We can press 7 tons of fruit in a long day. 80 gallon capacity (not including bladder.) 85" Overall height with a basket diameter of 25.5". A great press for the small winery. We used this press in 2004 to press 7 tons of cabernet. A local winery used two of them side by side to press over 50 tons. A joy to use. Download the PDF FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.

Read more less

$11,544.99
Low stock!

EnoItalia Flexible Impeller Pump | Euro 20 | 4.4 GPM | 1.5 in. T.C. | 220V

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation. This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

$619.99
Vinyl Air Tube for Marchisio Variable Volume Tanks | 120 cm Diameter

Replacement air tubes for variable capacity tanks. 120 cm tube fits 120 cm diameter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

$59.99
Cooling Snake | 0.6 Meters | 0.11 m² Surface Area

Cold stabilization in one barrel or control fermentation temperatures in a 100L tank. With an overall length of 20 in. this little snake can be used to control temperatures in any small batch. You will need a glycol system or at least a cold or hot water source to connect to the snake. How it works: This tube-within-a-tube snake is used to recirculate glycol or cooled/heated water through your wine to regulated temperatures. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Use our custom made Snake Bung to make an air tight seal. Slides over the snake and seals it to the barrel or the traditional air lock hole in a variable volume lid (provided the hole is approximately 1 3/4 in. in diameter.) Or punch a 1 3/4in. hole in any tank or lid. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. 1 3/8" diameter. 0.11 m² Surface area. Can also be used for heating

Read more less

$197.99
Cooling Snake | 2.5 Meters | 0.40 m² Surface Area

A new & unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. .40m Square meter of Cooling Surface Ideal for use with an Oak Barrel or Small Tank. Can also be used for heating. Optional silicon sleeve for sealing.

Read more less

$274.99
Low stock!

EnoItalia Wine Bottle Filler | Vacuum Filler | 4 Spout | Benchtop Bottle Filler | Stainless Steel | 650L/h Fill Rate | 110V

Vacuum bottle filler for use with wine, olive oil, or uncarbonated beer Air is cleared from each bottle before filling, reducing oxygen exposure Adjustable fill nozzles and support rack to fit your bottle size and fill level Variable fill speed to match your bottling pace High-quality 304 stainless steel construction Made in Italy by EnoItalia We like this robust vacuum filler from EnoItalia because it combines the low oxygen benefits of vacuum filling with the strong fill nozzles and frame of traditional Italian bottle fillers. This high-quality vacuum filler is the ideal choice for bottling uncarbonated beer or wine with minimal oxygen exposure. Air from the bottle is automatically extracted through the filling head and then liquid is drawn through the system and into the bottle via a vacuum pump. This greatly reduces the oxygen exposure that occurs with other fillers. The support rack and fill nozzles are adjustable so you can adapt it for your bottle size and desired fill level. Fill speed can also be adjusted with the digital display and vacuum regulator, allowing you to quickly set the desired vacuum level for each product. After each bottle is filled, excess liquid is returned to the cylinder. When the cylinder fills up, the stainless steel float will rise and shut off the vacuum pump. Designed entirely in stainless steel with high-quality components, this filler was designed to stand up to intensive, professional-level use. This unit is only intended for use with still beverages. It is not compatible with carbonated beer, cider, or sparkling wine. Features: 304 stainless steel construction Digital adjustment display 1.5" tri-clamp for product aspiration and circuit emptying DIN 15 connections for emptying filling nozzles Adjustable support rack Adjustable feet Lifting handles Capacity: 650 lt/h (171 gal/h) Power: 110V / 60 hz Please note: this unit comes with a bare cord. You will need an electrician to wire the appropriate plug.

Read more less

$3,999.99
Low stock!

Speidel Fruit Press | Wine Press | German Made | Stainless Steel | 20L

Expertly crafted stainless steel fruit press made by the original manufacturer of the bladder press Features a slotted screen which mirrors commercial press designs Higher juice yield (65-70%) compared to other press models Can be used with any domestic water supply that provides at least 36 psi of pressure Easy to clean after use—simply spray down with a hose and towel dry Made in Germany by Speidel Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware and a recessed valve assembly (to reduce accidental breakage). Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made. Speidel has been shifting their bladder presses from painted to all stainless, and we're pretty excited about it. Although the orange painted versions have their own aesthetic appeal, nothing beats the performance and practicality of stainless steel. Stainless is much easier to clean and much more resistant to rust. The painted versions are likely to chip over time through normal wear and tear, creating small crevasses for bacteria to call home. No such worries when working this beautiful, brushed stainless press. Overall height is 33" and outlet height is 12". A press cycle for this unit averages around 35 minutes. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts! FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.

Read more less

$1,399.99
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #45

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 22-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #45 specifications: Basket diameter: 18 inches Basket height: 24 inches Basket capacity: 22 gallons Ship weight: 189 pounds Manufacturer: Fratelli Marchisio (Italy)

Read more less

$1,614.99
Low stock!

EnoItalia Jolly 25 Destemmer | Built-In Must Pump | Stainless Steel | 2 HP | 220V Single Phase

All stainless grape destemmer with built-in must pump Screw Feed provides fast, continual hands-free operation Rubber tipped destemming bar for softer processing 4,000 - 4,500 lbs/per hour processing capacity Removable stainless basket for easy cleaning Made in Italy by EnoItalia For the serious home winemaker or a very small winery, this machine represents an amazing value. It is gentle, easy to load, and pumps the grapes into your awaiting fermenter, eliminating the need for a separate must pump. Why No Crushing Rollers? Because you don't need them. Here is how it works. You put fruit in the top bin and the screw feed moves the fruit to the left where it drops down into the destemming chamber. The fruit is destemmed and grapes drop down through the grate to the next level. Stems are ejected out the end of the destemming chamber and onto a tarp on the ground. After the fruit drops through the destemming chamber it falls into a bin at the bottom of the machine that has a screw feed. The screw feed pushes the grapes to the right where they are pushed into a circular chamber. In the circular chamber, a paddle wheel, pushes grapes back out the exit tube, through a 3" hose, you attach, and into the awaiting fermenters. Why this machine is so popular in Italy Because they know you don't need rollers on this type of machine. The action of the two screws, the destemming chamber and the paddle wheel crack the berries. More on the Built-in Must Pump The built in paddle-wheel style must pump can push fruit an average of 12' high with a 10' horizontal run OR up to 4' high with a 40' horizontal run. These are estimates only: actual results will vary on factors such as the total load on the machine and the viscosity of the must in the transfer tube. It can only be used at processing time and cannot be used later in the winemaking process. A Great Value! We recommend this machine for small wineries or larger home producers who do not wish to make the considerable jump to truly commercial quality equipment. You can make very, very good wine with this machine and we often tell small winery owners that the money saved can be used more effectively in other ways to make great wine. Summary of Features: 1) Stainless Body, Bin, Agitator, and Screw Feed 2) Removable stainless basket for easy cleaning (Destemming basket holes are 1.0225" wide) 3) A Screw Feed for continual, faster, hands-free operation 4) Rubber tipped destemming bar for softer processing 5) Output of 4000 - 4,500 lbs/per hour 6) Paddle wheel style Must pump built in with 3" TC Outlet 7) A powerful Single Phase 220V 2 HP motor (12.1 amp draw) with starting capacitor 8) High-quality units made by Enoitalia of Italy 9) Replacement parts are available 10) Two casters allow for easy wheel-barrow type movement 11) Emergency stop button 12) Length 46.5" (118 cm), Width 27" (68 cm), Height 35.4" (90 cm), weight 207 lb (94 kg) 13) Unit comes with bare cord wire. Wire on the appropriate 220v plug for your electrical connection. Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

$3,599.99
Low stock!

Marchisio Wine Bottle Filler | 4 Spout | Benchtop Bottle Filler | Level Gauge | Stainless Steel | 1.5 in. T.C. | 540L/h Fill Rate

Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5" H x 23" W x 18.5" D Reservoir is approximately 33 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

$2,694.99
Low stock!

EnoItalia Flexible Impeller Pump | Euro 30 | Self-Priming | Stainless Trolley Cart | 19.8 GPM | 1.5 in. T.C. | 220V
2 reviews

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs. The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. The 2 wheeled cart can make it into tight places in the winery, and scoots out of the way when not needed. With the included SS Bypass, you can reduce flow rates up to 25%. SS head and cart mean easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Although the Euro 30 is self-priming, the pump should never be run dry. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery SS Bypass for reducing flow SS head w/ flexible impeller Light assembly required - pump is separate from cart in box 220v bare cord - You will need to wire on the appropriate 220v plug

Read more less

$1,284.99
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #30

Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 8-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #30 specifications: Basket diameter: 12 inches Basket height: 17 inches Basket capacity: 8 gallons Ship weight: 78 pounds Manufacturer: Fratelli Marchisio (Italy)

Read more less

$909.99
Low stock!

EnoItalia Screw Elevator U-200 | Variable Speed Control | Loading Hopper | Height-Adjustable Trolley | 220V Single Phase

The U-200 Screw Elevator built entirely in stainless steel, is a multi-purpose machine that allows the transport of whole grapes inside the destemmer, the pomace to the press, or the evacuation of the stems from the unloading area of the destemmer. The low rotation speeds and included speed variator allow non-aggressive handling of the grapes. A height-adjustable stainless steel trolley is supplied as standard. Loading hopper with side pump connection for liquid recovery. 2HP single-phase motor with CE emergency stop. Features: Stainless screw feed 7.8" Diameter x 118" L Variable Speed with Frequency Drive Loading hopper with connection fitting for liquid Open cover lid for cleaning Winch to adjust the height Capacity: 2-10 tons per hour Hopper Dimensions: 25.5" x 28.3" x 35.4" Loading Height: 18.9" to 27.9" Discharge Height: 63" to 78" 220V Single Phase 2HP Motor CE panel control

Read more less

$11,379.99
Marchisio Fruit Press | Wine Press | Ratcheting Basket Press | #35
2 reviews

Ratcheting basket press with wood basket Classic design offered at an affordable price for home & professional winemakers alike Made with pressed steel basin with an enamel coating Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning 13-gallon capacity Made in Italy by Marchisio MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand. Wood basket presses offer time proven performance at affordable pricing. Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold. #35 specifications: Basket diameter: 14 inches Basket height: 19 inches Basket capacity: 13 gallons Ship weight: 101 pounds Manufacturer: Fratelli Marchisio (Italy)

Read more less

$1,094.99
Marchisio Wine Plate Filter | Noryl Plates | 20x20 | 20 Plate | Stainless Rolling Cart | 600L/h | 110V
4 reviews

Rolling cart wine plate filter Plates made from food-grade Noryl Built-in stainless centrifugal pump Built-in pressure gauge 1.5" tri-clamp inlet/outlet 600L/h wine filtering capacity Made in Italy by Marchisio Small commercial plate filter that will accomodate 20 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler. Features: 304 Stainless Steel Construction Four Casters for easy movement. Two of the casters have locks Built-in centrifugal stainess steel pump with on/off switch 21 Food-Grade Noryl plastic plates included. Double filtration kit available Built-in pressure gauge Maximum pump pressure is 2.5 bar (35 p.s.i.) Up to 600L (158 gal) Flow rate per hour 620x420x560mm/24x16.5x22 inches 90 lbs 1.5" Tri-Clamp inlet and outlet Pads should be placed in the machine rough-smooth-smooth-rough

Read more less

$3,269.99
Cooling Snake | 1.5 Meters | 0.25 m² Surface Area

A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your wine to keep temperatures down. Can be used in a tank, macrobin, or barrel. The inner tube runs through the middle of the outer shell, but is shorter. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. .25m Square meter of Cooling Surface. Ideal for use in an Oak Barrel or Small Tank. Can also be used for heating. Optional silicone sleeve for sealing.

Read more less

$241.99
Wine Cooling Plate | Stainless Steel | Weldless | 24 in. x 10.6 in.

Cool your fermenting must or wine using this weldless, easy-to-install, 304 stainless steel cooling plate that can be inserted into the lid of any Variable Volume Fermenter. Cold water or glycol is recirculated through the cooling plates thereby reducing the temperature of your ferment. This is a stainless steel setup, ensuring no chance of off-flavor in your wine. You drill two 1-1/16" to 1-1/8" holes into the lid. We provide two gaskets and a lock nut to seal on both sides of your lid, securing the plate in place. Plate measures 24" H x 10.6" W Inlet and Outlet 1/2" Male BSPP thread 300 mm long tubes Bulkheads located approx. 175 mm above the plate 0.36 Square meters of cooling surface Made from 304 stainless steel

Read more less

$314.99
Low stock!

Marchisio Wine Bottle Filler | 6 Spout | Benchtop Bottle Filler | Level Gauge | Stainless Steel | 1.5 in. T.C. | 810L/h Fill Rate

Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5"H x 36"W x 18.5"D Reservoir is approximately 58 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

$3,589.99
EnoItalia Loading and Sorting Table | Variable Speed | 220V Single Phase

Variable speed loading and sorting table with hopper sized to accept grapes from a macro bin Long enough for one to two people to remove leaves and bad bunches as the grapes feed from the hopper to your crusher destemmer Rolling casters for easy mobility Made in Italy by EnoItalia This Sorting Table solves several issues. It provides a lower receiving hopper (not shown in picture) in which to load fruit. The bin is oversized to allow you to gradually empty a macrobin when using a hydraulic bin tilter. There is enough space for two people to remove leaves, bad bunches, as the grapes are fed into the Crusher. Because the table consistently feeds the Destemmer/Crusher it also solves one of the key problems of overloading. When you dump large quantities of grapes into a crusher all at one time the machine will overload and not work as well, or even fail. The Sorting Table features speed control which is essential for different grape styles, level of sorting, and processing quality. Features: Variable speed 1 phase 220 V required 23.6 in Wide (60 cm) 181.1 in Total Length (460 cm) 141.7 in Sorting Length (360 cm) 2hp/1.5 kw power

Read more less

$18,279.99
Double Filtration Kit for Marchisio Wine Plate Filter | Noryl Plates | 20x20

Installs in one of our 20x20 wine plate filter units to allow you to change pore size of your pads halfway through the filter. For example, turn a 20 plate filter into two 10 plate filters for sequential rough (7 micron) then polish (3 micron) filtrations in one unit. Fits all of our 20cm x 20cm plate filters. Includes stainless plate and 2 black noryl end plates that install on each side of the stainless plate.

Read more less

$299.99
EnoItalia Stainless Stand and Chute
3 reviews

After using the Italian crusher/destemmer units for many years ourselves, we designed and manufactured a special accessory stand that is just tall enough to allow grapes to drop directly into your fermenter or transfer container. Many customers opt to use our 32 Gallon food-grade containers (which we sell as WE509). A regular garbage can can be placed at the end of the unit to collect stems. By using the stand you eliminate the need to move the must and stems from container-to-container, thus saving time and energy. This model fits our WE220 and WE223 series of EnoItalia Crusher/Destemmers. Does not fit models from other manufacturers. Please Note: This stand comes broken down, and will require assembly. Estimated Overall dimensions: Footprint: 32 1/4" long x 22" wide Height: 40" high. Top Tray Inside dimensions 32" long x 14" wide

Read more less

$399.99
EnoItalia Professional Crush Pad | Gamma 180 Elliptical Rotor Pump | Jolly 100 Crusher Destemmer | Loading and Sorting Table

Professional level crush pad featuring the Jolly 100 Crusher Destemmer, Gamma 180 Elliptical Rotor Pump, and Receiving/Sorting/Loading Table Adjustable speed sorting table can accept a macro bin when used with a forklift and bin tipper Jolly 100 with 3 independent variable speed motors offers the highest level of control when processing your grapes Gamma 180 pump gently moves crushed or whole grapes All pieces come with rolling casters for easy mobility Made in Italy by EnoItalia Enoitalia's top of the line complete Crush Pad including the Jolly 100 Crusher Destemmer, a Gamma 180 Elliptical Rotor Pump, and a Sorting and Loading Belt. This system is designed to work together as a complete system with all components able to work within similar and complimentary processing speeds. Enoitalia Receiving/Sorting/Loading Table A very flexible, adjustable speed loading and sorting table that offers multiple benefits. First the large bin is sized to accept a macro bin when used with a forklift and bin tipper. Then the unit uses a sealed food grade plastic belt to consistently and gently move grapes into your Destemmer/Crusher at an adjustable speed you set. This allows you to feed the Destemmer at the optimum rate without overloading it. The flat strectch of the belt allows for a person on each side to sort out leaves, bad bunches, etc.. Adjustable legs allows you to adjust the sorting table to the height of your Destemmer. Designed to feed grapes into the Jolly10. Features: Variable speed via Frequency Drive 1 phase 220 V Stainless Steel Frame 1.5 kW moter 23.6 in Wide (60 cm) 181.1 in Total Length (460 cm) 141.7 in Sorting Length (360 cm) Jolly10 Destemmer & Crusher EnoItalia's top of the line Centrifugal Destemmer Crusher gives you the highest level of control when processing your grapes. It comes with three independent motors allowing you to dial in the perfect speed for your grapes. The loading hopper features mechanically varied motor that allows you to adjust the speed the grapes are being fed into the destemming chamber. The destemming basket and shaft are controlled by frequency drive which allows for the use of potentiometer to electrically control the speed. The rubber rollers are driven by an independant set speed motor and can be adjusted to change the gap, or even removed, if you desire destemmed whole grapes. Independant control of each process allows you to find the balance between speed and quality and helps the machine from being overloaded at any one of the stages. The stainless steel destemming basket is made with a gentle anti-tear design and is driven by rubber tip paddles to ensure a gentle touch on your grapes. The basket has a diameter of 15.75 in (40 cm) and a length 49.2 in (125 cm) and features 24/25mm holes which is the perfect size for a variety of fruit. Baskets with smaller or larger holes are not stocked but are available for special purchase. Enoitalia has tested other basket styles on the market, namely using a plastic basket instead of a stainless basket. Because of they way they punch and finish the holes in the stainless basket they have found there was no difference and the stainless steel lasts much longer. They have also made and tested baskets with variable size holes where the holes begin larger and end smaller with the idea that less jacks will pass. They can make this basket but they actually think it does not work as well. The receiving hopper features drainage holes with allows oxidized juice from the bottom your picking bins to drain. The machine has telescoping adjustable legs that allows the height of the machine to adjust from 60 in/135 cm up to 76 in/193 cm. Cleaning is easy for a machine this size. It features an integrated washing system (connect a garden hose) to help cut down on cleaning time. The top panels, over the destemming chamber, also open up on both sides to allow you to additionally clean with a spray gun. The cleaning system and the easy access are really handy for use between grape varietals, after a break, and at the end of the day when the basket and destemming bar are typically removed for a thorough cleaning. To remove the destemming basket and the bar the whole end of the machine (end with power controls) easily folds up via shocks allowing the destemming shaft and basket to be pulled out without the use of tools. It can be done with one person, however it is much easier with two because of the weight of the basket and bar. Features: Rated for a production between 7-13 Tons per hour Runs on 3 phase 220 V power Loading hopper with gear speed variator kw 0.37 Destemming basket with electronic speed control 2.2/3kw for the shaft and basket Motorized rollers kw 1.5 Destemmer shaft with adjustable rubber tips Stainless steel basket with professional type anti-tear sytem Extraction of the liquid from the hopper with pump fitting connection Rubber screw system n°2 lifting eyes Telescopic legs Integrated washing system Heavy duty bearings with 13 grease fittings for long life Weight: 530 lbs Gamma 180 Elliptical Rotor Pump: Designed to move crushed or whole grapes from the Jolly10 the Gamma 180 is a gentle beast. Made from Stainless steel this elliptical rotor pump is equipped with a large loading hopper and 4" outlet. it is suitable for pumping whole grapes, destemmed, and even fermented grapes during or after fermentation. Grapes are transferred by pressure and not by centrifugal force, avoiding the crushing of the peels and the grapes seeds. The stainless steel trolley with anti-vibration system makes it easy to move and install the machine. As standard it is equipped with an outlet open cone, inclined hopper, and removable control panel. In cases where a prevalence and /or high discharge distance is required, it is advisable to install a compression vessel. As standard, the pumps are supplied with a 4" TC connection fitting, complete with stainless steel hose connection. We don't sell 4" tubing, we recommend you purchase directly from a food grade tubing distributor for the best options and pricing. Features: 4 kw engine 3 phase, 220 V, 60 Hz 12000-15000 kg/hr production Shaft speed: 47/58 rpm 100 DIN connection fitting 5 m discharge height 30 m discharge distance Please Note: This unit REQUIRES 220V Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

$46,079.99
Wine Cap Punch Down Tool | Stainless Steel | 46 in. Long | 12 in. Diameter
2 reviews

Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed end for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 5lbs. Shipping weight is 30lbs as these ship out as a UPS oversize 1 package. 46" Height

Read more less

$186.99
Cooling Snake | 3.5 Meters | 0.55 m² Surface Area

A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can dropped directly into a tank, macrobin, or even barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. .55 Square Meters of Cooling Surface Can also be used for heating. Optional silicon sleeve for sealing.

Read more less

$309.99
Cooling Snake | 5.0 Meters | 0.75 m² Surface Area

A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight. .75 Square Meters of Cooling Surface Can also be used for heating Optional silicon sleeve available for sealing

Read more less

$364.99
Vinyl Air Tube for Marchisio Variable Volume Tanks | 125 cm Diameter

Replacement air tubes for variable capacity tanks. 125 cm tube fits LA Inox 2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

$69.99
Vinyl Air Tube for Marchisio Variable Volume Tanks | 80 cm Diameter

Replacement air tubes for variable capacity tanks. 80 cm tube fits Marchisio 500-700 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

$49.99
Low stock!

Upright Foil Spinner | Vertical Spinner | Stainless Steel | 110V

Spring-loaded hand-lever for quick and easy operation Compatible with bottles from 7" to 14" in height Works with polylam, tin, and aluminum capsules Made in Italy by Marchisio Used to spin tin foils onto bottles, our Vertical Spinner features a guide for perfect bottle placement everytime, making it much faster and easier to use than a comparable Horizontal Spinner. Horizontal Spinners can be difficult to use because you have to center each bottle. The included hand-lever lowers the spinner onto the bottle and then springs back into place when released. The spinner height can be adjusted on the stand to accommodate bottles from 7" to 14" tall. 110 V. Works with polylam, tin, and aluminum capsules from 28 - 31 mm Ø, up to 65 mm in length. Unit comes unwired for a 110v plug.

Read more less

$3,589.99
Low stock!

EnoItalia Wine Bottle Filler | 6 Spout | Stainless Trolley Cart | Electronic Level Sensor | Integrated Pump | 980L/h Fill Rate | 220V

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D Runs on 220V Power, and comes with a bare cord. You will need an electrician to come and wire the appropriate plug.

Read more less

$4,689.99