Replacement 1.5" T.C. carbonation stone for MB conical fermenters and brite tanks.
Specifications:
0.4 micron
Overall Length: 14.5" (TC to tip of stone)
Stone Length: 9.8"
Made from stainless steel
Please Note: Second image is an example photo. New images coming soon.
Sanitary sample valve ideal for active fermentations as it has no pockets to trap fermenting wort
Easy twist-to-open handle is much easier to operate than standard plunger style sample valves
Disassembles quickly for cleaning between uses
Direct replacement for MB conical fermenters & brite tanks and compatible with any fermenter with 1.5" T.C. port
Nozzle mount for use with a pigtail sample coil to pour samples of carbonated beer
Look no further, this is a perfectly engineered 1.5" TC sample valve! With an easy twist to open handle and quick diassembly, this valve provides ease and convenience. Can be used on any fermenters 1.5" TC port.
This 304 stainless steel valve is perfect for active fermentations. It has no pockets to trap fermenting wort. It is very easy to disassemble and clean. It features a mount for a pigtail or a CO2 checker.
This is the recommended replacement sample valve for MB conical fermenters and brite tanks.
Made from a brand new 15.5 gal. keg with a 4" tri-clamp opening 1" yeast piping for easily moving dense yeast Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet Adjustable PRV for lowering pressure for long term storage 15.5 gal size, perfect for up to 10 bbl batches The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 10 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch. 1/2 bbl is perfect for up to a 10 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1 bbl size for up to 20 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
Replacement cup gasket is for the ForgeFit® Sanitary Sample Valve.
This is the recommended replacement part for the sample valve on MB conical fermenters and brite tanks.
Material: EPDM
Butterfly valves have the distinct advantage over ball valves in that they won't trap wort inside. They are the most sanitary valve you can ask for and are easy to clean in place. 2" tri-clamp.
These valves are a direct replacement of the butteryfly valves that come on MB conical fermenters and brite tanks.
Made from a brand new 7.75 gal. keg with a 4" tri-clamp opening
1" yeast piping for easily moving dense yeast
Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet
Adjustable PRV for lowering pressure for long term storage
7.75 gal size, perfect for up to 5 bbl batches
The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 5 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch.
1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. Also available in 1/2 bbl size for up to 10 bbl batches and 1 bbl size for up to 20 bbl batches.
Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid July.
Butterfly valves have the distinct advantage over ball valves in that they won't trap wort inside. They are the most sanitary valve you can ask for and are easy to clean in place. 1.5" tri-clamp.
These valves are a direct replacement of the butteryfly valves that come on MB conical fermenters and brite tanks.
This Reactor Rod was custom built to be used with the 1 bbl MoreBeer! Pro Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 32" long measured from the bottom of the T.C. fitting.
Made from a brand new 1 bbl keg with a 4" tri-clamp opening 1" yeast piping for easily moving dense yeast Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet Adjustable PRV for lowering pressure for long term storage 1 bbl size, perfect for up to 20 bbl batches The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 20 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch. To make it easier to move the yeast brink around the brewery consider a keg cart. Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
Ferment under pressure with precisely tuned pressure settings
Pressure fermentations help to suppress unwanted esters
Make clean lagers faster and at higher temperatures
Easy-to-read etched pressure scale from 15 to 30 psi
Hand adjustable—turn clockwise or counterclockwise to raise or lower your setting
Made from 304 stainless steel with polycarbonate cylinder
MB is a brand dedicated to crafting and sourcing high-quality, professional-level brewing supplies
The MB T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with any pressurizable stainless steel conical with 1.5" T.C. top ports. For larger units, the spunding valve can also be integrated into the blowoff pipework and used with a pressure gauge and tri-clamp tee. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.
Adjustable from 15-30 psi
Made from 304 stainless steel
11.75" H x 4" Ø
For Your Safety: Never exceed the maximum rater working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
Extra-large carbonation stone sized for 60 bbl fermenters and above
Quickly carbonate finished beer in any stainless fermenter or brite tank with 3" tri-clamp connection
Welded 1/2" FPT connection point feeds CO2 through the 17.75" long stone
Made from stainless steel
The MB carbonation stone can connect to any stainless fermenter or brite tank with 3" T.C. connection. The ferrule has a 1/2" female pipe thread connection point for your gas line. The overall length from the T.C. ferrule to the tip of the stone is 27.5" long with the stone section itself being approximately 17.75" in length.
Specifications:
2 micron
Overall Length: 27.5"
Stone Length: 17.75"
Single-piece design
Made from Stainless Steel
This Reactor Rod was custom built to be used with the 2 bbl MB Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 41" long measured from the bottom of the T.C. fitting.
Single station manual keg filler assembly makes a simple solution for small volume keg filling runs
Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution
Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg
Easily fill Sanke kegs with the MB Keg Filler. Simply connect to your brite tank and purge with beer. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full.
Stainless Steel D-style sanke couplers
Reinforced silicone tubing on beer side
Clear vinyl tubing on gas side
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Tanking samples of carbonated beer from carbonated tanks oftern results in a foamy mess. A pigtail sampling coil provides the necessary restriction in order to pour a clean, accurate sample. This sample valve accessory is perfect for taste testing for proper carbonation levels and dry hop status.
Compatible with the MB 1/4-Turn Sample Valve and the ForgeFit® Sanitary Sample Valve.
The German made 1.2 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 10 fermenters at once. The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY35) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures. The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing. It is German made and we guarantee you will appreciate the build quality when compared to other chillers on the market. The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed. Applications: Cooling of Fermentation Cold Crashing for Brite Tanks Maintain Lagering Temperatures Compatibility: The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit. Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit. Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity: Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better. Cooling Capacity Example: Up to 10 1BBL (31 Gallon) well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Set Up: In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary) Technical Characteristics:
Power: 110V-1Ph/50-60Hz Compressor Power: 1.2hp/900watts Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V) Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V) Stainless Steel Unit Water Temperature Range: 21°F - 86°F (-6°C - 30°C) Ambient Temperature Range: 50°F - 90°F (10°C - 32°C) Refrigerant R134a Free Glycol Water-Bath for Mini-Pumps Fittings 3/8" for Plastic Tubes of Individual Pumps Solid Wheels w/ Breaks for Easy Mobility Universal C19 Plug On/Off Switch Water-Level Sight-Tube Grooves for Individual Pump Cables Safety Inner Separation Water Side from Electric Side Tank Capacity: 12.68 gal. (48 L) Dimensions: 29.5"L x 15.75"W x 21.75"H Weight: 112.5 lbs Made in Germany CE Certified
This is a premium black neoprene jacket, tailor-made for the 1 bbl MB Conical Fermenter. Made from 6mm neoprene with black fabric on both sides. Perfect for insulating the conical and using alongside our Reactor Rods.
1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks.
Specifications:
2 micron
Overall Length: 7"
Single-piece design
Made from Stainless Steel
1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks.
Specifications:
0.4 micron
Overall Length: 10.5"
Stone Length: 5"
Stainless steel stone
Replacement tank manway locking handle for 3.5 bbl MB Conical Unitank Fermenter.
Please Note: This replacement part is intended for unitanks produced after 2021. The diameter of the threads are M18.
Dual headed can filler compatible with carbonated and still beverages Programmable fill height accurate to +/- 1mm for consistent fills with every operation Timed CO2 purging takes place automatically to remove oxygen before each fill The only filler model in this price range that can be set on a table and includes a drip tray Hardware included to mount the filler to your wall if preferred Set up takes only a few minutes with a simple push-button programming interface Adjustable height—designed to fill cans of any size up to 32 oz Crowlers Stainless steel construction throughout with self-draining drip tray
Just like the two-headed dog of Greek mythology, Orthos, this dual-headed can filler will perform like a beast in your canning line, doubling your fill rate and taking the stress out of canning day. Operation Programming the fill height and CO2 purge time is quick & easy and only requires pushing a single button to program your settings on either fill head. Once your settings are locked in, the LED ring will give you the green light to procced and filling and purging will execute automatically with a single push of the button. The Orthos Dual Head Can Filler utilizes an aero-grade pressure sensor to measure the height of the fill and is accurate to +/- 1mm for remarkably consistent fills each and every time. Construction We have designed the Orthos Filler to be a showcase for your taproom or home brewery, featuring a heavy stainless steel case and the necessary hardware for wall mounting or table use. The Orthos can be easily adjusted to fill any size can up to 32 oz Crowlers, and if need be, you can have two different style cans filling at the same time. The drip tray will help catch any potential spills throughout the filling process and features a drain that can be routed to a collection bucket or floor drain. Cleaning The cleaning process is just as easy as the filling process! Just attach a keg of water or beer line cleaner and run a fill cycle to clean out the product from the machine. The beer flows seamlessly through pinch valves, eliminating any internal cavities that need to be cleaned. The drip tray is conveniently removable for a quick wash after each use. When it's time for maintenance, simply swap out the beer tubing! Includes: Fittings / tubing to connect to 8mm Duotight inputs (1) 8mm Duotight Tee Fitting (DUO1090) (3) 8mm Duotight Elbow Fitting (DUO128) (3) 5.5 ft. Length of 8mm OD EVABarrier Tubing (D1717A) Duotight In-line Regulator (D1047) Wall Mount & Feet Drip tray You May Also Need: A keg of beer and connections for sanke or ball lock Sanke: (2) 8mm Duotight Beer Thread Adapters (DUO104) Ball Lock: 8mm Gas In & Bev Out Duotight Ball Lock QDs (DUO150 / DUO151) 8mm OD EVABarrier Tubing (D1717) Dual Body CO2 Regulator (D1083) OR
(2) Single Body CO2 Regulators (D1077) Two pressure settings are needed. One to set the fill speed and the other to set the purge speed Exceeding 3 PSI makes the purge turbulent and will mix air back into your can We recommend KOMOS Regulators which include 8mm Duotight adapters for the output Features: Dual heads to fill two cans simultaneously Stainless steel case Consistent Fills Drip tray, wall mount, & feet included High fill accuracy Easy programming Fills still or carbonated products Timed purging Beer and CO2 inputs are 8mm Duotight Specs: Wall Mounted: 14-3/4" H x 7-7/8" W x 3" D Table Mounted: 12 oz can: 15-3/4" H 32 oz Crowler: 17-3/4" H 7-7/8" W x 8" D 18V Power Supply
This clever device allows you to back fill your tank with an inert gas while cold crashing to avoid the ingress of O2 through the vacuum relief. It is normally used on a tee with a normal PRV/Vacuum Breaker. The NPT port is hooked up to a regulator and set to a low pressure. The exact setting used will depend on the volume of your head space and your regulator. Start at 2 PSI and adjust from there. A pin spanner is required for disassembly.
1.5" tri-clamp
1/2" female NPT port
This is a premium black neoprene jacket, tailor-made for the 2 bbl MB Conical Fermenter. Made from 6mm neoprene with black fabric on both sides. Perfect for insulating the conical and using alongside our Reactor Rods.
Make quick work of transferring finished beer from fermenter to kegs with the easy-to-operate four station manual keg filler Optional Keg Filling FOBs stop flow automatically once the keg is full, eliminating waste and making it even easier for a single person to operate the filler Sight glass at the inlet allows you to monitor beer flow from the fermenter—check if you're pulling yeast or breaking CO2 out of solution Elevated sample port for purging air from the system before filling runs Made from high-quality Stainless Steel tri-clamp fittings, custom-welded stand, and reinforced silicone tubing Shorten the time it takes to do your least favorite task with the MB Keg Filler. Our Keg Filler was designed by renowned brewmaster Colin Kaminski to make filling kegs a simple process that can be completed quickly. Connect your tank to the keg filler via the 1.5" butterfly valve inlet, which will enable you to shut off flow if you run into any issues. Monitor flow with the sight glass to see if you're pulling yeast, if there's air present in the system, or if CO2 is breaking out of solution because you're filling too quickly. The highest point in the filler is a plunger-style sample valve sitting at the opposite end, allowing you purge air out of the system and minimize oxidation. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. The Manual Keg Filler is available with or without a Keg Filler FOB on each filling line. See the instructions below for operating the keg filling FOBs. 4-Head Keg Filling Station Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side Custom-welded compact stainless steel stand
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included!
15% extra headspace with a working volume of 2 bbl and max volume of 2.3 bbl
True domed top and bottom with full length site gauge with sediment trap
2mm thick single shell design—See related product for the 2 bbl Jacketed Brite
Ships domestically from within the contiguous United States
Available Ludicrous Coil for glycol-supplied temperature control
MB brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
The standard 1 & 2 bbl MB Brites feature a single shell design, sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons.
Please note: these units do not have a built-in cooling jacket and are intended to be used in a walk-in cold room for temperature control.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features Include:
304 stainless steel construction
True domed top and bottom
Full length site gauge with sediment trap
Pressure/Vacuum relief valve 1 Bar / 15 PSI
Carbonation stone
Sealed pressure gauge
Analog temperature gauge
Sample valve
Center bottom tri-clamp drain
Top vent/CO2 port with butterfly valve
Pt10 Thermocouple interface
Specifications:
Grade 304 Stainless Steel
2mm thick single shell design
Internal Finish: #2B
Tank Height w/ Blowoff Pipe: 48.5"
Tank Diameter w/ Fittings: 31"
Empty Weight: 154 lbs
Working Volume: 2 bbl
Max Volume: 2.3 bbl
Working Pressure: 1 Bar (14.5)
All ports are 1.5" TC except 12" TC Dome Port and 4" TC Hopping Port
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
