Food Processing

2.3 °L - Briess Malting - Use as part or all of base malt in wheat beers. Runs efficiently through the brewhouse with slightly higher protein than White Wheat Malt. Often used in Hefeweizen and other traditional wheat styles due to a distinctive, characteristic creamy, sweet, wheat flour flavor. Improves head and foam retention in any beer style.  See attached Document for Typical Malt Analysis

Read more less

2.8  °L - Great Western. Same as the Domestic 2-row malt but has slightly more color and a drier flavor. This malt is more like the British Pale Malt. Example Malt Analysis: % Assortment 7/64" 63.5 6/64" 27.2 5/64" 7.2 Thru 5/64" 2.1 Chemical Analysis Moisture, % 3.9 Extract %, finely ground malt, as is 77.7 Extract %, finely ground malt, dry basis 80.9 Extract %, coarsley ground malt, as is 77.0 Extract %, coarsley ground malt, dry basis 80.1 F/C Difference % 0.8 Color, laboratory Wort, degrees Lovibond 2.8 Viscosity 1.46 Beta Glucan, ppm 80 Diastatic Power 134 Alpha Amylase (DU) 59.3 Total Soluble Protein %, dry basis 5.58 Total Protein %, dry basis 12.57 S/T Ratio % 44.4 Conversion, minutes 5-7 Aroma of Mash Aromatic Filtration Time Normal Clarity of Wort 8   If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - Pale Ale GR901 Briess Malting - Pale Ale GR303 Canada Malting - Superior Pale Ale GR670 Thomas Fawcett Malting - Spring Pale Ale GR362 Dingemans Malting - Pale Ale GR330 Admiral Maltings - Maiden Voyage Pale GR700 Admiral Maltings - Gallagher's Best Pale GR701    

Read more less

Extra-large bag perfect for holding grain when using the BIAB or Brew-in-a-Bag brewing method Also works very well for pressing small volumes of grapes or fruit to extract juices Made from food-grade nylon that can be washed and sanitized between uses Drawstring keeps the bag closed and the contents contained Huge BIAB bag (29" x 29") Reusable Nylon Mesh Bags are an indispensable part of any brew day. These food-grade nylon mesh bags are more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation. The ideal Brew-in-a-Bag Bag. This huge mesh bag is made from sturdy, food-grade nylon and features a handy drawstring to help keep the contents contained. Also works extremely well for pressing small volumes of fruit solids for winemaking: just put the fruit in the bag and tie it closed, press the fruit, and remove the bag with the solids still inside—easy! This bag is made of nylon, and measures 29 in x 29 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

2.3 L - Rahr Malting - Rahr 6-Row malt is excellent for any high-adjunct brew. 6-Row's high enzyme content is very beneficial when mashing with unmalted oats, corn, rice, etc. Approximately 1.7° L in color.   If this malt is currently out of stock or you'd like to try out a different maltster, check out Canada Malting 6-Row.  

Read more less

2.1-4.3 °L - Viking Malt - Viking Rye Malt is produced from high quality rye. The malting process does not differ much from pilsner malt production. Final air-on temperature is normally 161-176 â�°F. Rye malt gives bready and honey flavor. Can be used in specialty rye beers, Rye Lager, Rye Ale. Gives golden color and typical rye flavor. Viking recommends keeping the dosage of Rye Malt under 7% to avoid wort separation problems. In 2016 Viking Malt and Danish Malting Group joined forces to better serve their customers. Now the new Viking Malt is the leading malting company in Northern Europe and supply raw materials and services to the global brewing, distilling and food industries. Viking Malt has 6 malthouses in areas where our distinctive Nordic barley is sourced: in Halmstad, Sweden; Vordingborg, Denmark; Lahti, Finland; Panevezys, Lithuania and in Sierpc and Strzegom, Poland. The annual malting capacity is close to 600 kilotons. Malt Specification: Moisture % - max. 6.0 Extract fine % dm - min. 81.0 Color °L - 2.1-4.3   See the Documents tab below for Product Information and Typical Analysis.

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

2 °L - Briess Malting - Briess Raw White Wheat - Ideal for the production of classic Belgian Wit beers and other beers where cloudiness is desired. Wheat flour flavor; light straw color. (2°L)    

Read more less

1.6 °L - Great Western Malting - Superior Pilsen - Very pale, well modified, base 2 row malt. Perfect for brewing malty light-colored lagers, ales and beers where a crisp, clean finish is desired. (1.6°L)     Produced from selected lots of premium, Canadian-gown Copeland barley Low in protein, and colour High in extract Balanced modification Great for Lagers   If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - Pilsner GR900 Rahr Malting - North Star Pils™ GR311 Canada Malting - Superior Pilsen GR671 Briess Malting - Pilsen GR311 Weyermann® Specialty Malts - German Pilsner GR310 Weyermann® Specialty Malts - Bohemian Pilsner GR347 Dingemans Malting - Belgian Pilsner GR340 BestMalz - Pilsen GR414 Admiral Maltings - Admiral Pils GR710    

Read more less

8.1-9.6 °L - Viking Malt - When we eat this malt we think Bock beer and then we want to drink Bock beer! Its delicious and unique. Tons of melanoidins going on here. Lots of rich malt sweetness.  One commercial brewery is using it for Dark Sours....yum.   Viking Munich Malt is ideal malt for dark lagers, festival beers and bocks for underlining malty flavors and full bodied taste. The decreased enzyme activities have to be taken into consideration when designing the brewing recipe.   Malt Specification: Moisture % - max. 5.0 Extract fine % dm - min. 78.0 Color °L - 8.1-9.6 Protein % dm - max. 11.5 Free amino nitrogen mg/l - min. 120 Saccharification - max. 15   See the Documents tab below for Product Information and Typical Analysis.

Read more less

This 24-inch stainless mash paddle is the perfect size for most 5-gallon batch applications, and is well-suited for use with the BrewZilla, DigiBoil, Grainfather or Braumeister brewing units. Slotted paddle face gives you less resistance while stirring in extract or breaking up dough balls. Features a hole located at the handle end so you can hang up the paddle when not in use. 24" overall length, paddle is 4.5" long Paddle tapers from 2.5" to 1.5" wide 1/4" hanging hole 304 stainless steel construction   Kegland Part Number: KL03810

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

A great bag for larger brew in a bag recipes or just a large amount of steeping grains or whole cone hops. Made from nylon and comes with a drawstring. Measures 24 in x 24 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic, they're nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry, the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

6.1 - 8 °L - Weyermann® - Weyermann® Dark Wheat is a gently kilned malt made from high-quality German wheat. It contributes a mild golden color to wort and a robust malty-sweet flavor with notes of bread, biscuit, toffee, and caramel. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can also improve head formation and retention, depending upon the other grist constituents. In top-fermented beers, Weyermann® Dark Wheat malt performs especially well, adding creaminess, body, and complex wheat flavors. Weyermann® Dark Wheat malt has a somewhat 'drier', more complex character than pale wheat malts. It's the signature malt for Bavarian Dunkelweizen, and perfect for Weizenbocks, Kölsch, and Altbiers. (6.2-8.1 L)  

Read more less

Great for smaller kettles to do Brew in a Bag recipes or just for steeping grains. Made from nylon this bag comes with a drawstring and measures 15 in. x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.  

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

2.7 °L - Fawcett Malting - A traditional English barley variety known for its slightly bready flavor.  Example Malt Analysis: Moisture % 3.0 FGE (dry)% 80.5 Color (L) 2.3 - 3.0L  

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

2.6 °L - Canada Malting Company. Perfectly suited for New England-style IPAs and Belgian Wits. Oat Malt has a high haze for intentionally cloudy beers. The perfect balance between easy lautering, high turbidity and rich oat flavor. Combines the flavors of traditional Pale Ale malt and toasty granola. Suitable for up to 65% of the grain bill. Use as 5 - 10% of the bill to add a light haze without significant impact on the beer's flavor. 20 - 50% will add significant turbidity and increase sweet, toasty flavor and added mouthfeel. Canada Malting is the largest malt company in Canada, producing approximately 400,000 metric tons of malt per year for brewers and distillers around the world—from the largest of multinational organizations to the smallest of craft brewers—as well as for food processors. In addition to their malt plants in Calgary, Montreal and Thunder Bay, they own and operate nine country elevators through Canada Malting Grain group. Moisture %: 4.3 Protein Total %: 11 Color °L: 2.3 - 2.9 Extract FG Dry: 60 - 64 Turbidity: 65 - 80 Beta-Glucan: 125 - 160   See the Documents tab below for Product Information and Typical Analysis.

Read more less

The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).  Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid and gasket (DS124). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07245

Read more less

2.3 °L - Briess Malting - Exceptionally high alpha amylase and diastatic power (250) for maximum fermentable yield. (2.4°L)    

Read more less

Perfect for Brew in a Bag, this large 32 x 22 in bag will fit pots up to 21.5 in. The bag comes with a draw string to sinch down on the rim of your kettle. Made from polyester. Can also be used for whole hops in hoppy beers.   Kegland Part Number: KL01298

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

5.3° L - Briess Malting - Ashburne® Mild can be used as a base malt or high percentage specialty malt. Typical style inclusion would be Mild Ale, Brown Ale, Belgian Ale, and Barley Wine. Slightly darker with a higher dextrin level than Pale Ale Malt that will lend a high residual maltiness / mouthfeel.

Read more less

The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. Cannular Pro vs. Manual Unit This new Semi-Auto Pro model will guarantee you get a consistent seaming process every time. Unlike the less expensive manual can seamer, this machine has no lever for the seaming operation, meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.  Another major difference is that the Cannular Pro's table spacer is specially designed to work with all standard 202 cans, including the industry favorite 16 oz (473ml) and 12 oz (355 ml) cans, as well as our 500ml (16.9 oz) and 330ml (11.2 oz) Can Fresh Aluminum Cans. Unlike the manual model that requires a secondary table spacer for use with 330ml cans, the Pro model features an adjustable platform, allowing you to raise or lower the table spacer depending on what size can you're seaming. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised. The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminium cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon). The Cannular Pro can also be adapted for use with Tin Plated Steel Cans for food packaging applications. The table spacer is designed to accept these 100mm cans, but you will need to purchase the required 100mm Chuck separately. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.   Power: As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. This unit uses the more powerful Pro Model Power Supply, which provides enough power to seam tin plated steel cans as well as aluminum cans.   Why Cans? So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day!   Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs Splash guard not included Max Can Height: 7.75" (197mm) Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order. Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans when using only Can Fresh brand cans. We recommend testing at least 4 cans to verify the calibration. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a minimum 0.4mm (.015") actual overlap is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. Kegland Part number: KL15769

Read more less

24" long stainless steel spoon, great for stirring boiling liquids, mixing in hops, etc.  Features a wide stamped handle, and a hang hole at the end.

Read more less

Power supply for the Cannular Pro Semi Auto Can Seamer or MaltZilla Grain Mill. One end is an Anderson plug, which connects to the socket located on the back of the unit. The other end is a 110V plug to use with a standard power outlet. Kegland Part number: KL17336

Read more less

A great bag for brew in a bag recipes or just steeping grains. Made from nylon this bag comes with a drawstring and measures 18 in x 20 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Efficient, fast, and versatile.  The new burner from Blichmann Engineering is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs.  No wonder it is patent pending!  This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation.  Plenty of power to keep a rolling boil on a 20 gal batch of beer.  Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Features: Dual mode capacity High Power Mode: 140,000 BTU/hr Efficiency Mode: 80,000/hr Patent Pending Clip-on Heat Shield keeps valves cool Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years! Designed for outdoor use, the heat shield and body will protect your brew from wind Can accommodate kettles up to 20" Diameter or 250 lbs. (175 when using leg extensions) Leg Extensions are expected to be available in Late November.  

Read more less

Smaller home brews should still produce results that are just as tasty as larger batches, which is why this 5 Gallon Stainless Steel Kettle is an excellent addition to your home brew setup. This small 5 gallon brewing kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it’s available for a very affordable price. Although this brew kettle is quite economical, it’s also made of high quality 202 stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry even when filled. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!   Features: 0.5mm thick stainless sides and bottom 10" H x 12.5" D Riveted Handles on Kettle Body Kettle Lid with riveted handle 5 gallon full capacity (3 gallons while boiling) Perfect size for Extract Brewing!

Read more less

Reusable Nylon Mesh Bags are an indispensable part of any brew day.   These food-grade nylon mesh bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation.   Perfect for adding large amounts of whole hops to your boil, or to contain your malt in Mini-Mash brewing. Can easily hold 5 lb of milled grain. Note that this bag DOES NOT have a drawstring.   Measures 24 in x 24 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Classicly styled hardwood mash paddle for stirring large amounts of grain.  This paddle features a "T" handle for better maneuverability.  They are made in the USA from white birch. 36 inches long. 

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 12 in. Diameter x 16.5 in. Height (w/out airlock in place). Mouth is 4.75 in. wide. Note - The maximum temperature that these plastic fermenters can handle is 140F. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less