If you're the DIY type and looking for Food Processing equipment you came to the right place! Our company specializes in Brewing and other Food & Beverage DIY hobbies, but realizes our high quality equipment & ingredients can be used by anyone for home and commercial food processing. Take advantage of our great pricing and browse our inventory of food processing equipment & ingredients below.
The quintessential tool for launching your pizza and removing it from the oven
Rather than using a pizza spinner, the square peel can be used to remove the pizza while cooking and rotated by hand
Perforations allow excess flour to fall off the pizza base so there's less chance of flour burning and smoking up your oven
Perfectly sized for HIZO Pizza Ovens
The main purpose of a perforated pizza peel is to get rid of excess flour from the pizza base. But why do you want to get rid of the flour?
When you’re baking pizza on hot stone or steel, you don’t want flour on the baking surface because it burns. Fine wheat flours that are most commonly used for baking pizza burn at fairly low temperatures. It’s this flour that causes trouble. Dusting your pizza peel with semolina flour, which can handle higher heat better, can also help. Burnt wheat flour will make the oven smoky and will result in more cleaning work when you’re done baking. The burnt flour tends to stick and can be a real pain to get rid of. Especially on an unglazed pizza stone. And if you’re not able to clean the stone properly, the flour can keep smoking next time you use the stone.
Less Contact Surface – Less Sticking
A perforated peel has a smaller surface that is in contact with the pizza dough. This means pizza is less likely to stick to a perforated pizza peel. The reason is that the larger the contact surface is, the more friction there will be between the peel and the pizza. And more friction means it is more likely to stick.
A smaller contact surface also means that you’ll need less flour when you’re dusting the peel. As noted above, you want as little flour as possible in the hot oven. So in addition to removing more flour from the dough itself, the peel need less flour due to the holes. Perforated pizza peels are also lighter than solid pizza peels, due to less metal on the carrying surface. This will make it easier to use the peel.
Less Condensation – Crispier Pizza Crust
When you take a hot pizza out of the oven, you may have noticed that water sometimes is formed under the pizza. This moisture makes the pizza less crispy, or even soggy. Using a solid pizza peel may create condensation when the hot pizza meets the cold (room temperature) surface. This is mostly a problem with metal peels since hot air is trapped between the pizza crust and the smooth carrying surface. Condensation happens when this hot air is cooled down to a certain point (it’s dew point), and water drops are created. When you’re using a perforated pizza, on the other hand, you will experience less condensation. The reason is that the holes let the hot air escape through the peel.
12" Square x 31" Long
Lightweight aluminum construction. Phillips Head screwdriver required for assembly.
KegLand Part Number: KL21869
Low volume jar fermenter perfect for small batch pickling
Includes airlock and stopper for fermentation
A second solid stopper is included to plug the lid and use the jar for storage
This simple food fermentation kit is the ideal choice for small batches as it requires very little brine to fill the jar and submerge your vegetables. Includes a 1L (33.8 oz) jar with flip top lid, two stoppers (one with hole and one solid), and a 3-piece airlock. Install the airlock during fermentation so gas can escape, and when fermentation is complete, replace it with the solid stopper to store your pickled vegetables.
Compatible with the HIZO G14 Pizza Oven or any backyard grill!
Conveniently pre-seasoned—simply wipe with a wet cloth and pat dry
Double-sided with a smooth, flat side and raised grill grooves on the other
Raised lips on both sides to keep in the juices and oils
Perfect for the HIZO G14 Pizza Oven or your backyard grill, the double-sided griddle and flat skillet plate is the heavy-duty heat-retention cooking utensil you need in your arsenal. Weighing in at a whopping 9 lbs, this thick cast iron plate can really hold the heat! The HIZO double-sided skillet has a flat, smooth griddle side, and raised grill grooves for the other side. Both sides have a raised lip to handle some juices and oil to fry in. It can be moved around easily by the two removable handles in three location points on the plate.
Directions for First Use:
Conveniently pre-seasoned—simply wipe with a wet cloth and pat dry
For super sizzling restaurant-style hot plate, preheat on high for at least 20 minutes
Dimensions: 12" x 12" x 1"
KegLand Part Number: KL24907
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Designed to streamline your labeling process, saving you time and effort. Apply self-adhesive labels quickly and efficiently. Adapts to various sizes and shapes, making it suitable for labeling bottles, cans, jars, or other containers Accurate and Precise: Achieve professional-looking results every time with consistent label placement and adherence Date Coder automatically prints your programmed packaging date onto the label For some homebrewers, the most satisfying aspects of the brewing process is when you hand someone a bottle or can of your latest creation. At this point, presentation is everything, and that begins with a beautifully packaged beer. Using a 3rd party, you can design your very own adhesive labels for bottles or cans, then apply them with perfection using KegLand's Semi-Auto Label Applicator. This semi-automated compact label applicator machine is suitable for bottles, jars or cans of up to 160mm diameter and is fully adjustable for labeling any cylindrical container. Apply self-adhesive labels to your beer, wine or spirits quickly and easily. This version KegLand's Label Applicator includes a date coder to print the packaging date onto the label. This is generally only needed for commercial applications, and if you'll be using the label applicator for personal use, we would suggest the more affordable option without the date coder (CAN310). Specifications: Power: 110V 60Hz Min Label Thickness: 5μm (0.005 mm) Max Label Height: 150 mm (5.9") Max Label Length/Width: 300 mm (11.8") Max Label Roll Diameter: 280mm (11.02") Max Label Roll Inside Diameter: 76mm (2.99") Max Vessel Diameter: 160 mm (6.2") Label Applicator Speed: 1–3 seconds (varies by label length) Approx. Dimensions: 21.6" L x 9.8" W x 13.7" H Data Coder: Fully adjustable position, automatic operation, date code stamps included KegLand Part Number: KL20329
Replacement HIZO Hot Plate Handle. Solid Cast Iron, branded with the HIZO Logo. It features 2 x Holes for variable hook / hanging placement.
The HIZO Cast Iron Double-Sided Skillet includes two handles. This is a single replacement handle.
KegLand Part Number: KL24914
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot, airlock and stopper.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots and experimental batches or taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 10in Diameter x 14in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
The 30 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own. Imported pot, assembled in USA with additional USA components. Lifetime limited warranty.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
Please Note: 30 & 55 gallon G2 Boilermakers will come equipped with G1 Lids (see image for details)
This Pop Cultures refill pack contains all the ingredients needed for a 1-gallon batch of Wildflower Mead.
Refill Pack Contains:
Wildflower Honey - 3 lbs
CellarScience FRESH Dry Wine Yeast - 8 g
FermFed (Dap Free) - 4 g
Potassium Carbonate - 5 g
One Step Cleanser - 2.5 oz
This is an extension that fits onto the Blichmann 55 Gallon BoilerMaker kettles. It has the G2 finish, matching their newest line of kettles. Using this extension, the 55 gallon BoilerMaker nearly doubles its volume to top out at slightly over 100 gallons! Comes with a gasket for a watertight seal between the BoilerMaker Kettle and its Extension. The extension comes with a sight gauge marked up to 100 gallons, and the original lid for your BoilerMaker will fit right on top.
This is designed for 2 BBL batches, and is a great option for someone who wants to expand capacity without starting over with a new Brew Stand and set of kettles!
We've found that using a StarSan solution around the gasket / 55 gallon kettle top helps to get the extension into the kettle.
NOTE - Does not come with 55 Gallon Kettle in picture. This is just for the extension (top half). You will also need the Extension Removal tool to use this unit.
The 7.5 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. This US made single piece construction pot carries a lifetime limited warranty. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free. Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
This Thermal Printer Ribbon is a replacement for the ribbon supplied on the Semi-Automatic Label Applicator Machine. ID: 25mm OD: 63mm Ribbon Width: 30mm Ribbon Length: 100m KegLand Part Number: KL20336
Dough proofing box perfectly sized to accommodate individual pizza dough portions, making it easy to manage and transfer dough. Box only. See here for the box lid or the complete box & lid. Dimensions: 17.5" Long x 12.5" Wide x 3.25" Deep
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
This Pop Cultures refill pack contains all the ingredients needed for a 1-gallon batch of Cider.
64 oz of preservative-free Apple Juice will need to be purchased separately.
Refill Pack Contains:
Apple Cider Concentrate - 0.5L
CellarScience FRESH Dry Wine Yeast - 8 g
One Step Cleanser - 2.5 oz
Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the interior of the labeling machine. For the exterior roller mount, see here. KegLand Part Number: KL88925
Replacement roller mount for the Semi-Automatic Label Applicator Machine. This roller mount attaches on the exterior of the labeling machine. For the interior roller mount, see here. KegLand Part Number: KL88925
