Draft
Shop by collection
-
Beer Faucet Shank | Pass Through | Stainless | 4"
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a stainless steel shank with chrome plated brass hex nuts. Dimensions: 4" - Shank Length 4" - Thread Length 2-3/4" - Pass Through Length Max length with hex nuts at either end Does not account for nuts/nipples you may install Male Beer Thread (5/8" BSP)
$29.99
-
Stainless Steel Shuttle for NukaTap® Beer Faucet
This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out. Compatible with all NukaTap faucets, including Gen 2 Flow Control. KegLand Part Number: KL35958
$5.49
-
Check Ball - Sanke Coupler
Replacement plastic ball for check valve assembly on Sanke couplers.
$1.99
-
Growler Filler - Stainless Steel
Love bringing a growler of your brew with you, but hate the waste and mess of filling it off your tap? Just pop this handy Stainless Steel Growler Filler into your faucet, attach an appropriate length of tubing, and proceed to fill from the bottom of the growler up! Filling from the bottom upward will dramatically reduce foaming, which less mess and wasted beer! and fill away! Faucet insert OD is 1/2”, barbed outlet is 3/8” OD. This model fits standard faucets. Will not fit Perlick or Perl faucets as their nozzles have a different inner diameter. For Perlick faucets please checkout item D1224.
$7.69
-
Kent Fittings Carbonation Cap - Shut-Off Quick Disconnect (QD) Set
Use this quick disconnect set to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories. TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install the H481 Kent Shut-Off Female QD w/ 1/4 in Barb included. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party. * A single-handed connection and disconnection * Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material * Easy installation into your home brewery * KENT Systems quarter turn design functions safely
$17.99
-
Duotight Push-In Fitting | 6.35 mm (1/4") Stem x 4.5 mm (3/16") Barb
This handy part is what you need to connect one side into a standard 6.35 mm Duotight fitting and secure the other side with 3/16" ID tubing using a hose clamp over the tube. We have wide range of stainless stepless hose clamps that you can purchase here. KegLand Part Number: KL25928
$1.09
-
KOMOS® | Sanke Keg Coupler Body Washer | D-Style | 3-Pack
Replacement body washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.
$6.99
-
Ultra Barrier™ PVC Free Beer Tubing - 1/2 in.
Commercial quality PVC free beer tubing for homebrewers! EJ Beverage Ultra Barrier™ tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC. Advantages to this unique tubing are: PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Proven to have no significant impact on taste or flavor Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 33 psi For long draws where you want as little resistance as possible. Technical Specifications: 1/2" line provides .025 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 1/2" line holds 1 1/3 of an ounce per foot. PVC Free.
$12.49 - $185.99
-
KOMOS® 10 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system. Made from high-quality aluminum that will never rust like steel tanks Dispense 18 x five-gallon kegs of homebrew CGA320 valve pairs with standard US-style CO2 gas regulators KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between! Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank Brand new aluminum 10 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 10 lb tank because it holds 10 lbs of compressed (liquified) CO2. 10 lbs of CO2 is enough to dispense about 20x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 20.75" T x 6.875 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$149.99
-
Stainless Steel Tee | 1/4 in Barb
3 way stainless steel tee with 1/4 in barbed fittings. Use the tee to split gas lines to push multiple kegs with one CO2 tank.
$5.49
-
KOMOS® Matte Black Stainless Draft Tower Kit
Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower with matte black finish Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar) Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
$89.99 - $179.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Tee
This Monotight tee piece is perfect for splitting water or gas lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 9.5 mm (3/8 in.) Male Elbow
This elbow fitting has a 9.5 mm Duotight connection and a Duotight-compatible 3/8" OD barb. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18432
$2.99
-
Intertap® Faucet Kit - Stainless
Get all of the amazing features and functionality out of your Intertap faucet! This kit includes all of the accessories that can be paired with the Stainless Steel Intertap forward sealing faucet. Whether you want to fill a growler or pour a stout, this faucet does it all. Everything you need to dispense from and maintain your Intertap faucet! This Kit Includes: Stainless Steel Intertap Beer Faucet (D1210) Intertap Stout Spout (D1213) Intertap Growler Filler Spout (D1214) Intertap Ball Lock Spout (D1217) Intertap Self-Closing Faucet Spring* (D1212) Intertap Seal & Gasket Kit (D1215) *Does not include shank.
$71.99
-
Rigid Plastic Joiner for Duotight Fittings | 6.35 mm
Creates perfectly straight, rigid joins with push-in fittings Simplifies connecting small accessories compared to using EVABarrier tubing 50mm length provides ample grip and easy disassembly, even after full insertion into two Duotight 6.35mm fittings This rigid joiner is made from strong polypropylene. It's useful to make rigid joins with push-in fittings that are dead straight. Although it's possible to make joins using short pieces of 6.35mm OD EVABarrier tubing, connecting small accessories together will be much easier when you use these instead. The 50mm length is long enough so even after pushing right into two Duotight 6.35mm fittings on both ends, you should still have an exposed length of about 3mm so you can still easily take the fittings apart later. 6.35mm OD x 50mm L (1/4" x 1.9"). KegLand Part Number: KL28790
$0.99 - $4.39
-
KOMOS® | Beer Faucet Tap Ferrule | Chrome | 5-Pack
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle. 5/16" top threads and 3/8" bottom threads. Pack of 5. Comes in a convenient zip lock bag.
$15.49
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07023
$3.69
-
Vinyl Beverage Tubing | Rigid | Draft Line | 1/2 in. ID | 3/4 in. OD
For long draws where you want as little resistance as possible. Technical Specifications: 1/2" line provides .025 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 1/2" line holds 1 1/3 of an ounce per foot. Made from PVC.
$5.89 - $96.59
-
Duotight Push-In Fitting | 6.35 mm (1/4") Female x 6.35 mm (1/4") Male Elbow
The Duotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. Designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. Duotight push in fittings have been engineered for maximised performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18449
$1.69
-
Dual-Threaded Insert For Wooden Taphandles
Your custom-made tap handle will be the talk of the party! You can create your own tap handle and mount it with this threaded insert. Simply drill a 1/2" hole in the bottom of your wooden piece and thread the D1299 with a flathead screwdriver (a coin can also be used in a pinch!). When you’re finished, mount your custom tap handle to your faucet, pull a pint and admire your handiwork! Internal threads are 3/8", 16 thread-per-inch. Mounts to any standard faucet.
$3.29
-
Jockey Box Shank Washer | Rubber Shank Seal
This is a large rubber washer for use on beer shanks and jockey box shanks. These will help to create a seal around the hole that your faucet shank goes through.
$1.99
-
Beer Faucet Shank | Stainless | 2" | Includes 3/16" Nipple Back Nut & Plastic Collar
Comes with a 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 11/16" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 3-3/4" - Total Length (Tip to Tip) 2-1/8" - Shank Length (Without Nut & Nipple) 1-1/4" - Thread Length 11/16" - Pass Through Length
$19.99
-
KOMOS® | Rear Faucet Gasket | 3-Pack
This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect. Comes in a convenient zip lock bag.
$3.29
-
Monotight Push-In Fitting - 8 mm (5/16 in.) x 1/2 in. BSP
Connect EVABarrier tubing to 1/2" male threads with this Monotight adapter. Compatible with EVABarrier 8 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18753
$2.99
-
Sanke Tap - Ball Retainer
Replacement triangular plastic ball retainer for check valve assembly on Sanke couplers. This is the little plastic piece that holds the check valve ball in place.
$3.49
-
Drip Tray - 12 in. Wrap Around
Never lose a drop with this wrap around drip tray that hugs the tower to catch all of those stray drops. Fits all of the towers we sell! Made from stainless steel. Dimensions: 7 in wide x 12 in long x 0.75 in deep (up to 4.33 in tower diameter) Kegland Part number: KL01427
$38.49
-
Perlick Faucet - 690SS Stainless Steel (Flow Control w/ Push-Back Creamer)
The famous forward-sealing Perlick beer faucet, with integrated Flow Control valve and Push-Back Creamer! Use the flow control feature to reduce unwanted foaming during the length of the pour, then finish it off with the push-back creamer to top off the beer with the perfect amount of foam. Get ready to start pouring picuture-perfect pints with the Perlick 690SS! Constructed of 304 stainless steel to last a lifetime. About Perlick Forward Sealing Beer Faucets: The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!. Please note: In order for the push-back creamer to function properly, you must avoid overtightening the tap ferrule. If you're unable to push-back on the faucet lever, check that there's enough room between the tap ferrule and the friction bonnet and back off the tap ferrule as needed.
$104.99
-
Beer Faucet Shank | Stainless | 6 in. | 8 mm Duotight Adapter | Intertap® | NukaTap®
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL11952
$39.99
-
Taprite D-Style Keg Coupler | Sanke Keg Beer Tap | Stainless Steel Body & Probe | PRV | Gas Barb Included
D-Type keg coupler for standard American sanke kegs All stainless steel with stainless coupler body and stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the style tap you’ll need. American-made by Taprite, this coupler is constructed from stainless steel and features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. The 304 stainless body and probe will provide a more reliable life span compared to its nickle-plated counterpart. Features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
$75.99
-
Regulator Y Fitting Splitter | 1/4" MPT x 1/4" FPT x 1/4" FPT
Make a single outlet regulator into a dual outlet reguator with this Y-fitting. Remove the shutoff from a regulator, add thread tape and screw the y fitting in tightly, then thread in two regulator outlet valves, D1120. You can now shut off 2 gas lines independently from one another to protect from leaks and cross contamination. 1/4MPT x 1/4FPT x 1/4FPT
$8.79
-
Pressure Gauge | Low Pressure (0-60 PSI) | CO2 or Nitrogen Regulator | 1/4" MPT Right-Hand Thread
Great Replacement for a broken gauge. Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator. 1/4” MPT Right-hand thread.
$12.99
-
U-Style Keg Coupler | Guinness Keg Beer Tap | Stainless Steel | PRV | Gas Barb Included
U-Type keg coupler for Guinness and some other Euorpean beer kegs Stainless steel keg probe and coupler body Pull-style lever handle Includes 3/8" OD barb for gas inlet A special tap that is required for Guinness kegs. U-Type Tap. Also known as a keg coupler, coupling, or adapter. Will Usually Fit: Abby White Boddingtons Pub Ale Guinness Stout Harp Kilkenny Leffe Magners Smithwicks Ale
$89.99
-
KOMOS® | Hanger Bolts for Beer Tap Handles | 5/16 in. | 5-Pack
This dual sided screw has one side which goes into a Faucet Tap Ferrule and the other is a wood screw to go into a wooden tap handle. Perfect for creating your own custom handles. 5/16-18 thread. Comes in a convenient zip lock bag.
$8.29
-
Duotight In-Line Regulator | 0-150 PSI | Liquid & Gas Compatible | 8 mm Duotight
Easily set different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds! Compatible with both liquid and gas 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). Suitable for applications ranging from 0-150 psi. Since this unit does not have a built-in pressure gauge, it can be used in the full pressure range without ever needing to purchase or swap out the gauge. We recommend using an adjustable relief valve/spunding valve on your keg to set the pressure. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output This regulator is perfect for lowering your mains water pressure for use with the Continuous Soda Carbonator Keg Lid. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts KegLand Part number: KL02172
$10.49
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 3/4 in. BSP
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
$3.29
-
Stainless Steel Tailpiece - 3/8 in.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut. Tailpieces are available in a range of barb sizes to fit up to your tubing size. 304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
$4.19
-
Kegerator Replacement Line Kit | 1-3 Taps | Includes Stainless Tees, Clamps and Gas Line
Kegerator draft line kit for a triple tap tower. Kit Includes: Beverage line Measures 4mm ID x 8mm OD (5/32" x 5/16") 1 x 5.5' length per tap Gas line Measures 5mm ID x 8mm OD (13/64" x 5/16") 1 x 10' length Barbed tee fittings for splitting gas line Hose clamps
$5.99
-
Taprite Secondary Regulator | 1 Way | Wall Bracket for Easy Mounting | 5/16" Barb
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc! Wall brackets for easy mounting 5/16” barbed outlet fittings with individual shutoff valve How does one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator! Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster. Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable. Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
$74.99
-
EVABarrier Double Wall Draft Tubing | LightShield Black | 6.3 mm ID x 9.5 mm OD
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 6.3 mm ID size is recommended for long draw beverage lines 20-25 ft. in length Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 6.3 mm (1/4") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, we recommend using 20-25 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 6.3 mm (1/4") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42772
$39.49 - $260.99
-
KOMOS® | Stainless Steel Tailpiece | 5/16 in. | 4-Pack
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 5/16 in. tailpiece is commonly used with 1/4 in. ID draft tubing for a tight fit. Comes in a convenient zip lock bag.
$12.49
-
Kegland | JetKeg | Keg Backpack
Serve beer on the go with the JetKeg Keg Backpack Fits up to a 5-gallon homebrew keg or sixtel commercial keg Made with durable buckles and strong nylon shoulder and waist straps Fully insulated to keep your keg colder for longer Includes the Pluto Beverage Gun and EVABArrier tubing for dispensing Mobile draft dispensing has a whole new meaning with the JetKeg Backpack from KegLand. Strap a keg to your back and walk through a crowd, dispensing delicious beer as you go. You'll have more followers than the fabled Pied Piper in no time. The backpack is fully insulated to keep your keg colder for longer, and features hot tape sealed seams on the inside to prevent leaking. If you've ever felt too anchored down serving beer from yet another booth at the festival, the JetKeg is the solution. Load up a 5-gallon homebrew keg or sixtel sanke keg and join the fray! The JetKeg Backpack comes with the Pluto Beverage Gun, a precut length of EVABarrier tubing, and Duotight reducer to connect the tubing to the Pluto Gun. It does not include any gas side equipment, and you will need additional fittings depending on whether you'll be using it with a homebrew keg or commercial keg. Includes: JetKeg Backpack 1 x Black Nylon Pluto Gun (Duotight compatible) 1 x 6.5mm x 8mm Duotight Reducer (for Pluto Gun) 1 x Precut length of 4mm x 8mm EVABarrier tubing Please note the example photos show accessories that are not included with the JetKeg. Does not include keg, gas fittings, keg coupler, CO2 cartridges or cylinder. For Ball Lock Kegs, we recommend using the Mini CO2 Regulator Kit with a 74 g cartridge for your gas supply. Then use a flared ball lock disconnect with Duotight x Flare adpater to connect the Pluto Beer Gun to your bev out post. For Sanke Kegs, we recommend using the Mini CO2 Regulator Kit with a 74 g cartridge for your gas supply. The Mini Regulator can connect to a D-Style keg coupler with the Gas-In Sanke to Ball Lock Adapter. The Pluto Beer Gun can be connected to the keg coupler beverage out with the Duotight x Beer Thread adapter. KegLand Part Number: KL12560
$76.99
-
Duotight Push-In Fitting - 9.5mm (3/8 in.) Female Bulkhead
This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing (D1719). With the lock nuts in place, there is approximately 1" of pass through threading. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL21012
$3.89
-
In-Line Check/Ball Valve | Brass | 5/16 in Barb
Protect your gas regulator from liquid damage! Insert in a gas line and you will be able to shut off gas flow anytime. Has internal check flow valve that prevents liquid from traveling past, even when the ball valve is open. Not only handy, it is a regulator saver. Has 5/16" barbs for easy installation on gas lines.
$16.99
-
Vantage Synergy Accelerator Beer Line Clear | Safer Enzyme Based Cleaner - 32 oz
Accelerator super charges the Vantage Synergy Power User Formula to provide superior results with unmatched safety. This enzyme-based cleaner will reduce biofilms and odors throughout your beverage system. Enzyme-based cleaners for beverage systems are a safe and modern alternative to traditional hazardous chemicals. Vantage Synergy Accelerator is not a standalone cleaning option but is designed for the three-part Power User Formula. Industry standard beverage system cleaning best practices can be time-consuming and often dangerous. Using enzyme-based cleaners are a new and safe alternative to hazardous caustic chemicals and are effective for removing biofilms and odors from beverage systems. Triple zero rated for health and safety. No DOT hazardous shipping warnings. Features industry standard tracer dye. When used with Vantage Synergy Biomass Remover and Vantage Synergy Demineralizer, the Vantage Synergy Accelerator boosts the Power User Formula to provide outstanding results without the safety concerns of other hazardous cleaning chemicals. For use only in Power User Blend with Vantage Synergy Biomass Remover and Vantage Synergy Demineralizer. Vantage Synergy is an industry-leading non-caustic, non-toxic beverage system cleaning solution that reduces cleaning time by up to 50%. This non-hazardous lineup of cleaning chemicals reduces the risk of injury compared to other caustic solutions, and is much more environmentally friendly thanks to its biodegradable chemistry. For use with CO2 pots and recirculating pumps: Add 2 oz Biomass Remover, 2 oz Demineralizer, 2 oz Accelerator per gallon of water for the complete Power User Formula. ONLY mix Vantage Synergy products with each other. NEVER mix any other chemical products with Vantage Synergy products. Highlights: Use the three-part Synergy package and reduce cleaning time by up to 50% Non-caustic, non-corrosive and non-hazardous Triple zero health and safety rating No DOT hazardous shipping charges for freight or parcel delivery Improve personal and consumer safety, reduce property damage and injury liability claims Built-in industry standard tracer dye Biodegradable chemistry limits wastewater effluent concerns Challenge: Not having enough time to perform industry standard cleaning cycles and visit enough accounts per day. Solution: Use the three-part Synergy package and reduce cleaning time by up to 50%. Challenge: Existing cleaning products are hazardous, dangerous, and corrosive. Solution: Vantage Synergy chemicals are non-caustic, non-corrosive and non-hazardous. Switching to Synergy will improve personal and consumer safety, reduce property damage costs and mitigate injury liability claims. Challenge: Built-in tracer dye as an industry standard safety feature. Solution: Our “old” caustic and acid brands did not feature a tracer dye, Vantage Synergy does. Tracer dye indicates when cleaning solution is loaded into a system. Challenge: Dangerous caustic and acid chemicals are not “green” products. Solution: Vantage Synergy products are biodegradable and limit wastewater effluent contamination concerns. Challenge: Hazardous shipping fees are expensive for freight and parcel delivery. Solution: Vantage Synergy products are “triple zero” non-D.O.T. regulated for shipping.
$9.99
-
Replacement Pressure Relief Spring - 30 PSI
This replacement spring is intended for use with our adjustable stainless steeel pressure relief valve - D1832L & D1833L. These units are adjustable from 0 to 30 psi. Example photo shown. The spring you receive may not match the photo exactly.
$5.49
-
Self Closing Faucet Spring | NukaTap® Flow Control G1
The NukaTap FC is the world's only forward-sealing flow control tap that can use an auto close spring. By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas. Please note: this spring is not compatible with the standard non-flow control NukaTap faucet or the NukaTap Flow Control G2. KegLand Part Number: KL17985
$2.19
-
KOMOS® | Beer Faucet Shank | 3.5 in. | Welded Barb
Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/2" - Shank Length (Without Nipple) 2-5/8" - Thread Length 2-3/8" - Pass Through Length 3/16'' - Bore
$19.99
-
Taprite Regulator Rebuild Kit | CO2 or N2 regulators | 7740-19-SP
If your Taprite Regulator is drifting or losing pressure, why not try repairing it rather than replacing? Over time the internal diaphragm can wear out resulting in drifting pressure or a slow leak through the regulator body Refurb your unit with this Regulator Rebuild Kit and return your Taprite regulator to it’s lost glory. Works with Taprite CO2 or N2 regulators. Not intended for other regulators. Taprite Part Number: 7740-19-SP
$26.99
You have seen 288 out of 480 products