An adjustable pressure relieve valve with a range from 0 to 30 psi. Made from stainless steel this is non-threaded and designed to be welded in place. For a 1/4" MPT option see D1833L.
Faucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar!
Once installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1 1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Features a welded 3/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
A great item to keep on hand just in case. The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. These washers can wear down over time and need replacing, so we always recommend having a spare or two ready to go so you're not left high and dry when the original washer breaks down.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Kegerator draft line kit for a double tap tower.
Kit Includes:
Beverage line
Measures 4mm ID x 8mm OD (5/32" x 5/16")
1 x 5.5' length per tap
Gas line
Measures 5mm ID x 8mm OD (13/64" x 5/16")
1 x 8' length
Barbed tee fitting for splitting gas line
Hose clamps
Comes with a 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 4" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/8" - Shank Length (Without Nut & Nipple)
3-3/4" - Thread Length
4-5/8" - Pass Through Length
3/16 in. Nipple
Keep your draft faucet in perfect working order.
Replace your old coupling nut to keep your faucet firmly attached to your shank
Knurled finish makes gripping easy
With this faucet replacement nut you can renew a worn-out part on your well-used draft faucet. This replacement part is the nut that attaches the faucet to the shank.
Knurled finish makes it easy to snug even with wet hands.
For connecting your Co2 gas tank to your homebrew style Pin Lock Keg. Includes pin lock gas in quick disconnect, 3 feet of gas line and two hose clamps.
Kegerator draft line kit for a triple tap tower.
Kit Includes:
Beverage line
Measures 4mm ID x 8mm OD (5/32" x 5/16")
1 x 5.5' length per tap
Gas line
Measures 5mm ID x 8mm OD (13/64" x 5/16")
1 x 10' length
Barbed tee fittings for splitting gas line
Hose clamps
The MoreBeer! kegerator conversion kit ships free to the lower 48 states! Convert any refrigerator large enough to hold a keg into a kegerator with our easy to install kit. We include a simple, but what we think is necessary, upgrade a high quality stainless drip tray to eliminate messy drips from hitting your floor. The whole kit is simple to install with the included instructions.
Kit includes:
New Aluminum 5 lb CO2 tank
High quality dual gauge regulator
Beer faucet, knob and shank
Beer line & connectors
Gas line & connectors
Stainless steel drip tray
Sanke keg valve tap
Instructions.
CO2 tank is required by law to be shipped empty. You will need to find a local source, such as a welding supply, to fill your CO2 tank.
Note About Freezer Installations:
If you plan to mount on a freezer you need to see where the coolant lines are located insite the wall so you don't damage during installation. Plug the unit in with the lid open and you will see the lines form condensation on the inside. (... drill a hold where there are no lines!)
Rinse out your pin lock corny keg without disassembling the keg posts and dip tubes
Connect to your garden hose spigot and flush with water with the keg upside down
Quick and convenient way to wash out residue from a spent keg before it hardens
An inexpensive, time-saving assembly for rinsing out your Pin Lock kegs.
You've just finished a keg of your homebrew. Most of us set that keg aside and clean it later when we brew up the next batch. As it sits it gets harder to clean and then we definitely have to disassemble the entire keg to scrub all the parts. Well for years our Metal Shop Manager and lead Product Designer, Darren Schleth, has been using a simple keg cleaner in our R&D brewery to rinse his kegs, while upside down, through the body connects. The keg is instantly rinsed while all the residue is still soft. The keg can then later be soaked with PBW and/or sanitized without having to remove the body connects or poppets. This saves lots of time. As employees at MoreBeer! saw this simple assembly everybody wanted one of their own.
To use: Connect the brass garden hose attachment to a garden hose. Then connect the grey and black quick disconnects to the inlet and outlet body connects on your Pin Lock keg. Remove the lid and turn the keg upside down. Turn on the water. Water risnes through both the inlet and outlet dip tubes completely rinsing the inside of the keg.
Keep your draft faucet in perfect working order.
Replace the washer that seals the sliding shaft of your faucet to prevent leaks
With this washer you can renew a worn-out part on your well-used draft faucet. This washer seals the sliding shaft, which often becomes brittle with age causing the faucet to drip.
This is the kit for those who have an extra refrigerator and want draft beer on tap, but either can't drill a hole in the refrigerator or would like to save almost $60 when compared to the deluxe kit. We include a hand held beer line assembly instead of a faucet, shank, and drip tray.
Kit Includes:
New Aluminum CO2 tank
Dual gauge regulator
Hand held beer line assembly
Sanke keg valve tap
All hoses and clamps
Great for customizing and expanding your modular gas line manifold!
This Add On Assembly for a gas manifold is easy to add to your existing manifold setup. Gives you the ability to expand your setup without having to buy a new manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
This 6 in. chrome shank comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/2" - Shank Length (Without Nut & Nipple)
4-1/8" - Thread Length
5-1/4" - Pass Through Length
Show everyone you mean business with these 50 caliber BMG beer tap handles. Made from real, once fired, 50 caliber bullets that are hand polished and coated with an anti-tarnish lacquer. The 50 Caliber BMG is used in most of the military's heavy machine guns. A great addition to any man cave!
Fits all US Faucet levers, 3/8” – 16 UNC (Unified Coarse Thread).
Does not come with faucet!
This beverage line jumper connects to the bev output on a standard U.S. D-style sanke keg coupler and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1760 & D1762). Specifications: 5 ft of 3/8" ID beverage tubing 3/8" Tailpiece and Tailpiece Elbow
Want to serve your keg on the go? Don't want to mess with inaccurate or expensive portable CO2 regulators? The Party Pump is the answer. It's an easy way to dispense a keg. Just get that keg in a bucket of ice and let the party start! Use the pump to add pressure and the included picnic faucet to dispense.
Features:
Picnic faucet
Beer line
Pump
Kegland Part number: KL01212
A deluxe quality drip tray gives your setup a professional look and makes cleanup a snap!
The Deluxe Stainless Counter-Top Drip Tray has a louvered splash grate and can be easily cleaned in the dishwasher or sink. The 8" width easily accommodates a double faucet tower. Rubber feet hold the tray securely and protect your counter from scratches.
Deluxe features include a brushed finish 304 stainless steel, which is more expensive and difficult to work with - but looks beautiful. We carefully TIG weld the corners instead of sealing with a bead of silicone, or over-welding and then grinding which destroys the finish.
Designed by MoreBeer! & Made in the USA.
8 1/4" Wide x 5 3/8" Deep x 3/4" Tall
Replacement triangular plastic ball retainer for check valve assembly on Sanke couplers. This is the little plastic piece that holds the check valve ball in place.
Keep your draft faucet in perfect working order. Replace your old ball washer to keep your faucet lever moving properly This is the first washer of a two part set (D1200C) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the first washer of a two part set that is used to control motion of lever.
Keep your draft faucet in perfect working order!
Replace your old or broken friction bonnet to keep your fauce lever moving properly
This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
Unthreaded cartridges can be used with handheld CO2 injectors, the 128 oz Growlerwerks uKeg, as well as some mini keg systems.
Unthreaded cartridges are not compatible with our mini CO2 regulators.
Keep your draft faucet in perfect working order.
Does not react with beer
Is stronger than brass
With this stainless steel lever you can renew & upgrade a worn-out part on your well-used draft faucet. This is the lever that actually opens and closes the faucet, and that the tap handle attaches too. Stainless levers are used to replace broken brass levers because of their strength and ability to not react with beer.
You're in college and you would rather spend your money on more beer than a fancier tap. We get it. The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight, has a pressure relief vent, 2' length hose and a plastic faucet.
Also known as a keg coupler, coupling, or adapter.
If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy!
Comes with:
D1255 - Faucet,Knob, and Shank Combo
D1480 - Economy Drip Tray
D1700 - 5 feet
H950 - Hose Clamp Qty.2
KEG740- Beverage Out Pin Lock
You save 10% buying this complete kit rather than piecing it all together separately. Cheers!
Please Note: Keg Not Included
For the do-it-yourself person, this is the piece that you see at the bottom of most handles, you must also get the D1298B if you want to screw it into a wood tap handle. (5/16" top threads and 3/8" bottom threads)
The Most Essential Barrel Accessory!
Keep your wine safe and ensure the integrity of your barrel with this top-up system. We're all familiar with the fact that barrels lose volume over time - in fact the evaporation that leads to this is one of the benefits of aging wine in a barrel. However, let it go too far with out topping up and the excess headspace in the barrel will cause your SO2 levels to drop and open the door to oxidative or bacterial spoilage. That is why it is essential to keep your barrel topped up at all times!
Our MoreWine! Topping system is based around the common 5 gallon Cornelius ("Corny") Keg. These kegs are relatively inexpensive, simple to work with and easy to get parts for. 5 gallons of topping wine is about the right amount to work with a new 30 gallon barrel. The best part about topping up your barrel from a keg is that the wine that remains in the keg is always protected by a layer of the inert gas that you used to push the previous wine out, so it doesn't matter how long the wine sits in the keg!
This kit includes the Argon/Nitrogen tank and regulator for you to push the wine out of the keg, and all the tubing and other parts that you need to make it work, as well as comprehensive instructions.
Kit Includes:
New High Quality Italian 5 gallon "Corny" keg
20 cu. ft. Argon/Nitrogen tank
Argon/Nitrogen regulator
Tubing and hardware to connect the gas regulator to the keg
Tubing and hardware to dispense wine from the keg into your barrel
Cleaning brush for your dispense line
Comprehensive instructions for assembly and use
