Draft

Replacement o-ring for brass pressure relief valve D1830.

Read more less

Includes Pin lock beverage out quick disconnect, line, hand held faucet and two hose clamps. 5 ft of 3/16" line.

Read more less

This tailpiece is a replacement for the gas-in barb that comes mounted on our D1505 Sanke Tap. It will not work as a 5/16" beer line connection due to the lip on the back side of the fitting.   Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.   Tailpieces are available in a range of barb sizes to fit up to your tubing size.  

Read more less

Install a tap where you want it, without the hassle of searching for all the separate components you’ll need. This faucet, knob, and shank combo is a great price, it’s easy to install, and it works and looks great!   This kit includes the 4" shank with 3/16" nipple, all stainless faucet, and plastic 2.5" knob.

Read more less

Here at the shop, many of us plan on using these nitrogen cartridges to push wine out of 5 gallon soda kegs, since the nitrogen does not go into solution. You could also use them in beer situations where you want to push out but not carbonate. Please be aware that the nitrogen will only fill 20% of the space that a 12g CO2 cartridge will because Nitrogen exerts a lower partial pressure than CO2. Nitrogen has a higher PSI than CO2 so these cartridges will not work with CO2 Mini Regulators. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.   

Read more less

Great Replacement for a broken gauge.   Replacing a broken gauge on your pressure regulator is a snap with this Left Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.    Used to determine level of remaining gas in the tank.   1/4” MPT Left-hand thread.

Read more less

This chrome plated Draft Beer Faucet will keep your bar or kegerator looking great for years to come. Industry standard faucet for draft beer that fits North American shanks and towers Chrome Plated Brass body with quick action brass lever   Specifications: Body Thread: 1 1/8” – 18 Thread (North American Beer Industry Standard) Lever Thread: 3/8” – 16 UNC (Unified Coarse Thread); FIts standard tap handles. Chrome Plated Brass Body Brass Lever

Read more less

G-Type keg coupler for Anchor Steam and some other European kegs Pull-to-engage ergo lever handle Includes 3/8" OD barb for gas inlet Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs. Will also fit: Abbot Ale Anchor Liberty Ale Anchor Porter Anchor Steam Bass Pale Ale Blackthorne Cider Caffrey's Fuller's ESB Fuller's London Pride Grolsch Old Speckeled Hen Rouge Scottish Tennents Sir Perry William's Watney's Young's Young's Chocolate Stout Young's Oatmeal Stout Young's Ram Rod Bitter Young's Special London Ale

Read more less

Plastic hand pump with sanke tap built in. Also known as a keg coupler, coupling, or adapter.

Read more less

Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc! Wall brackets for easy mounting 5/16” barbed outlet fittings with individual shutoff valve How does one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!   Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.   Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.    Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.

Read more less

Great Replacement for a broken gauge.   Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.   1/4” MPT Right-hand thread.

Read more less

This plastic faucet with a burgundy finish is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles. Burgundy plastic body features a durable stainless steel lever Plastic spring-loaded shaft and chrome-plated brass bonnet and collar Standard threading is compatible with most branded tap handles Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages. Spout is removable and can be replaced with shorter spout for beer Used in commercial applications, bars and restaurants all over the world!  

Read more less

The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.

Read more less

The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.

Read more less