A-Type keg coupler fits most German beer kegs such as Paulaner and Spaten
Click-to-engage ergo lever handle
Includes 1/4" OD barbs for gas inlet and liquid outlet
Barb elbow outlet is ideal for low clearance keg storage and easier line routing
For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD.
This model features a pull-ring pressure relief valve (not pictured).
This Keg Tap Will Usually Fit:
Ayinger
Bitburger Pilsner
Delirium Tremens (Belgium)
Erdinger Hefetrub Weisse
Fischer
Franziskaner Hefe-Weisse
Hacker-Pschorr Weisse
Hoegaarden White
Isenbeck
Krombacher
Kronenbourg 1664
Paulaner
Spaten
Staropramen
Victoria Bitter
Warsteiner
KegLand Part number: KL06057
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used with 3/16 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
3/8-24 UNF x TR21-4 adapter ring for the KegLand Core 360 Mini CO2 Regulator. Suitable for 16 g CO2 cartridges. This is a replacement standard ring that is included with the regulator.
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07474
Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 4 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining.
Features:
Removable grill
Made from stainless steel
19.6" L x 6.7" W x 0.6" D
Kegland Part number: KL13178
The KOMOS shank wrench is designed to tighten the nut on the back of a faucet shank. It is double offset for clearance inside of coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Also super handy when tightening shanks inside a cold box when space is at a premium and it hard to fit a traditional wrench. Pubs have historically made their own, now you can get one the easy way.
Laser Cut from 12 guage 304 Stainless Steel. Offset 3/4" on each end to fit around insulation or inside of small towers.
Features:
1-1/16" 12 Point Wrench
1-1/8" 12 Point Wrench
Made from 304 Stainless Steel
If your Taprite Regulator is drifting or losing pressure, why not try repairing it rather than replacing? Over time the internal diaphragm can wear out resulting in drifting pressure or a slow leak through the regulator body Refurb your unit with this Regulator Rebuild Kit and return your Taprite regulator to it’s lost glory.
Works with Taprite CO2 or N2 regulators. Not intended for other regulators.
Taprite Part Number: 7740-19-SP
Vinyl tubing is extremely popular in the homebrewing community for transferring your cooled wort. Thick wall vinyl (PVC) tubing is also great for gas and beer lines in keg systems. 3/8 in ID tubing is typically used in commercial dispensing applications.
This stainless steel drip tray is perfect for the KOMOS Double-Wide kegerator and home bar countertops. At 29.5" in length, this drip tray can comfortably cover up to 8 draft faucets. The grill is removable for easy cleaning.
Features:
Removable grill
Made from stainless steel
29.5" L x 6.7" W x 0.9" D
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel for longevity
Designed to fit KOMOS Premium Regulator (D1077) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Premium CO2 Regulator (D1077) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 model KOMOS regulator. It is not compatible with models D1170, D1171, D1175.
This ball valve with male and Female Beer Thread (5/8" BSP) is incredibly handy for those wanting to shut off flow of liquid and gas lines on keg couplers or shanks. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. Made from 304 stainless steel.
Kegland Part number: KL00406
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07023
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early March. Serve beer on the go with the JetKeg Keg Backpack Fits up to a 5-gallon homebrew keg or sixtel commercial keg Made with durable buckles and strong nylon shoulder and waist straps Fully insulated to keep your keg colder for longer Includes the Pluto Beverage Gun and EVABArrier tubing for dispensing Mobile draft dispensing has a whole new meaning with the JetKeg Backpack from KegLand. Strap a keg to your back and walk through a crowd, dispensing delicious beer as you go. You'll have more followers than the fabled Pied Piper in no time. The backpack is fully insulated to keep your keg colder for longer, and features hot tape sealed seams on the inside to prevent leaking. If you've ever felt too anchored down serving beer from yet another booth at the festival, the JetKeg is the solution. Load up a 5-gallon homebrew keg or sixtel sanke keg and join the fray! The JetKeg Backpack comes with the Pluto Beverage Gun, a precut length of EVABarrier tubing, and Duotight reducer to connect the tubing to the Pluto Gun. It does not include any gas side equipment, and you will need additional fittings depending on whether you'll be using it with a homebrew keg or commercial keg. Includes: JetKeg Backpack 1 x Black Nylon Pluto Gun (Duotight compatible) 1 x 6.5mm x 8mm Duotight Reducer (for Pluto Gun) 1 x Precut length of 4mm x 8mm EVABarrier tubing Please note the example photos show accessories that are not included with the JetKeg. Does not include keg, gas fittings, keg coupler, CO2 cartridges or cylinder. For Ball Lock Kegs, we recommend using the Mini CO2 Regulator Kit with a 74 g cartridge for your gas supply. Then use a flared ball lock disconnect with Duotight x Flare adpater to connect the Pluto Beer Gun to your bev out post. For Sanke Kegs, we recommend using the Mini CO2 Regulator Kit with a 74 g cartridge for your gas supply. The Mini Regulator can connect to a D-Style keg coupler with the Gas-In Sanke to Ball Lock Adapter. The Pluto Beer Gun can be connected to the keg coupler beverage out with the Duotight x Beer Thread adapter. KegLand Part Number: KL12560
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard Beer Thread (5/8" BSP) which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful.
The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings.
Made from 304 stainless steel.
The last faucet wrench you'll ever own! The KOMOS Draft Wrench is a professional 7 function draft tool built for a lifetime of adjusting everything from your regulator and draft shanks to your keg coupler and hose clamps. You will appreciate the quality, compared to cheaper stamped draft wrenches, everytime you use it. The KOMOS Draft Wrench is laser cut from 12-gauge 304 Stainless Steel and hand finished. Designed by a draft tech with professional draft techs in mind.
With all of its different functions, the Pro Draft Wrench is sure to save you many back-and-forth trips to the toolbox. However, we suggest a traditional Crescent wrench for loosening over tightened regulator to tank connections. The KOMOS wrench is great for general purpose, but a Crescent wrench is suggested when extra torque is needed.
Features:
Pin Wrench
Screwdriver
Regulator Adjuster Nut Wrench
Keg Tap Probe Wrench
Shank Coupler Nut Wrench
Shank Lock Nut Wrench
Regulator Wrench
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
This Monotight elbow fitting will help routing gas or liquid lines in your kegerator or water filter setup. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14052 Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
Duotight 9.5 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10.
KegLand Part Number: KL21678
The KOMOS stainless S-Style coupler is built for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. Featuring stainless steel body and stainless steel probe, this keg tap is made to last. The coupler comes without fittings so it can be adapted however you sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port.
Both gas-in and bev-out ports come bare so you can fit it out exactly how you want it. Maybe you like a larger gas line and smaller beer line—no problem. Or perhaps you're ready to take your draft system into the 21st century with EVABarrier draft tubing and Duotight push-to-connect fittings. Whatever floats your boat, keep your draft setup anchored with the KOMOS keg coupler.
The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a higher or lower pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.
This Monotight tee piece is perfect for splitting water or gas lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
D-Type keg coupler for standard American sanke kegs All stainless steel with stainless coupler body and stainless keg probe Click-to-engage ergo lever handle Includes 1/4" OD barbs for gas inlet and liquid outlet This D-Style sanke keg coupler, made from stainless steel, is the most popular beer tap style in the USA. Also known as the American Sankey Coupler, this particular D-Style tap is constructed from heavy duty stainless steel and designed to withstand commercial usage, so you can expect an even longer life span when used for draft beer dispensing at home. Beer is dispensed out of the top port, the side port is for gas. This model comes with a pressure relief valve. Comes with stainless 1/4" beer and gas barbs included for free. For a more economical Sanke Tap (with PRV), see our D1506. This is the default tap used by most American Craft breweries. Here is a partial list of breweries that have been reported to being using American D style kegs.
Abita ACME Alaskan Alexander Keith Anderson Valley Bad Frog BayHawk BBC Black Dog Blanche de Chambly Blue Moon Breckenridge Brooklyn Bruin Pale Ale Budweiser Busch Carlsburg Celis Cider Jack Columbia Brewing Coors Coors Light Corona Deschutes Black Butte Devil Mountain Dos Equis Eel River Brewing Ellicottville E.J. Phair Fat Tire Firehouse Firestone Flying Dog Foster's Full Sail Genesee George Killian's Irish Red Goose Island Gordon Biersch Grant's Green Mountain Cidery Hamms Hard Core Cider Henry Weinhard's High Falls Holy Cow Red Hornsby's Hudson Valley Humboldt Ice House Killarney Killian's Irish Red Kirin Ichiban Kokanee Labatt Blue Leinenkugel Little Kings Lost Coast Lowenbrau (US) Mad River Maudite Miami Trail Brewing Michael Shea's Michelob Mickey's Middle Ages Miller Milwaukee's Best Modelo Molson Canadian Moosehead Natural New Amsterdam New Zeland Steinlager Nor'Wester North Coast O'Doul's Old Milwaukee Old Vienna Pete's Portland Mactarnahan's Amber Portland Oregon Honey Pyramid Razors Edge Red Ale Red Dog Red Hook Red Wolf Rogue Dead Guy Ale Rogue Hazelnut Brown Rogue Red Rolling Rock Sam Adams Saranac Saxer Brewing Schmitt's Shiner Bock Ship Inn Shipyard Sierra Nevada Sleemans Southpaw Spanish Peaks Black Dog Starr Hill Brewery Steinlager Strohs Tecate Thomas Kemper Trois Pistoles Unibroue Wasatch Weinhard's Whitbread Ale Widmer Hefeweizen Woodchuck Dark & Dry Cider Wyder's Yuengling Zebra Kegland Part number: KL06071
Keep your draft faucet in perfect working order. Replace your old friction washer to keep your faucet lever moving properly This is the second washer of a two part set (D1200D) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the second washer of a two part set that is used to control motion of lever.
This elbow fitting has a 9.5 mm Duotight connection and a Duotight-compatible 3/8" OD barb. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18432
Don’t shop around for separate components when you can get our faucet, shank, and knob combo all in one kit!
This kit includes our Stainless Faucet, Stainless 4" Shank with 1/4" nipple, and a Faucet knob, combined into one. Please note that the actual useable length of the shank will be about 3 5/8", due to the hex nut and tailpiece attached to it.
With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.
Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.
5/16" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 1/4" OD - 5/16"
Angled 1/4" tailpiece that is used with hex nut (D1740). Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Made from stianless steel. ID - 3/16" OD - 1/4" Kegland Part number: KL05081
