Want to serve your keg on the go? Don't want to mess with inaccurate or expensive portable CO2 regulators? The Party Pump is the answer. It's an easy way to dispense a keg. Just get that keg in a bucket of ice and let the party start! Use the pump to add pressure and the included picnic faucet to dispense.
Features:
Picnic faucet
Beer line
Pump
Kegland Part number: KL01212
A deluxe quality drip tray gives your setup a professional look and makes cleanup a snap!
The Deluxe Stainless Counter-Top Drip Tray has a louvered splash grate and can be easily cleaned in the dishwasher or sink. The 8" width easily accommodates a double faucet tower. Rubber feet hold the tray securely and protect your counter from scratches.
Deluxe features include a brushed finish 304 stainless steel, which is more expensive and difficult to work with - but looks beautiful. We carefully TIG weld the corners instead of sealing with a bead of silicone, or over-welding and then grinding which destroys the finish.
Designed by MoreBeer! & Made in the USA.
8 1/4" Wide x 5 3/8" Deep x 3/4" Tall
Replacement triangular plastic ball retainer for check valve assembly on Sanke couplers. This is the little plastic piece that holds the check valve ball in place.
Keep your draft faucet in perfect working order. Replace your old ball washer to keep your faucet lever moving properly This is the first washer of a two part set (D1200C) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the first washer of a two part set that is used to control motion of lever.
Keep your draft faucet in perfect working order!
Replace your old or broken friction bonnet to keep your fauce lever moving properly
This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
Unthreaded cartridges can be used with handheld CO2 injectors, the 128 oz Growlerwerks uKeg, as well as some mini keg systems.
Unthreaded cartridges are not compatible with our mini CO2 regulators.
Keep your draft faucet in perfect working order.
Does not react with beer
Is stronger than brass
With this stainless steel lever you can renew & upgrade a worn-out part on your well-used draft faucet. This is the lever that actually opens and closes the faucet, and that the tap handle attaches too. Stainless levers are used to replace broken brass levers because of their strength and ability to not react with beer.
You're in college and you would rather spend your money on more beer than a fancier tap. We get it. The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight, has a pressure relief vent, 2' length hose and a plastic faucet.
Also known as a keg coupler, coupling, or adapter.
If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy!
Comes with:
D1255 - Faucet,Knob, and Shank Combo
D1480 - Economy Drip Tray
D1700 - 5 feet
H950 - Hose Clamp Qty.2
KEG740- Beverage Out Pin Lock
You save 10% buying this complete kit rather than piecing it all together separately. Cheers!
Please Note: Keg Not Included
For the do-it-yourself person, this is the piece that you see at the bottom of most handles, you must also get the D1298B if you want to screw it into a wood tap handle. (5/16" top threads and 3/8" bottom threads)
The Most Essential Barrel Accessory!
Keep your wine safe and ensure the integrity of your barrel with this top-up system. We're all familiar with the fact that barrels lose volume over time - in fact the evaporation that leads to this is one of the benefits of aging wine in a barrel. However, let it go too far with out topping up and the excess headspace in the barrel will cause your SO2 levels to drop and open the door to oxidative or bacterial spoilage. That is why it is essential to keep your barrel topped up at all times!
Our MoreWine! Topping system is based around the common 5 gallon Cornelius ("Corny") Keg. These kegs are relatively inexpensive, simple to work with and easy to get parts for. 5 gallons of topping wine is about the right amount to work with a new 30 gallon barrel. The best part about topping up your barrel from a keg is that the wine that remains in the keg is always protected by a layer of the inert gas that you used to push the previous wine out, so it doesn't matter how long the wine sits in the keg!
This kit includes the Argon/Nitrogen tank and regulator for you to push the wine out of the keg, and all the tubing and other parts that you need to make it work, as well as comprehensive instructions.
Kit Includes:
New High Quality Italian 5 gallon "Corny" keg
20 cu. ft. Argon/Nitrogen tank
Argon/Nitrogen regulator
Tubing and hardware to connect the gas regulator to the keg
Tubing and hardware to dispense wine from the keg into your barrel
Cleaning brush for your dispense line
Comprehensive instructions for assembly and use
This tailpiece is a replacement for the gas-in barb that comes mounted on our D1505 Sanke Tap. It will not work as a 5/16" beer line connection due to the lip on the back side of the fitting.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
Install a tap where you want it, without the hassle of searching for all the separate components you’ll need. This faucet, knob, and shank combo is a great price, it’s easy to install, and it works and looks great!
This kit includes the 4" shank with 3/16" nipple, all stainless faucet, and plastic 2.5" knob.
Here at the shop, many of us plan on using these nitrogen cartridges to push wine out of 5 gallon soda kegs, since the nitrogen does not go into solution. You could also use them in beer situations where you want to push out but not carbonate. Please be aware that the nitrogen will only fill 20% of the space that a 12g CO2 cartridge will because Nitrogen exerts a lower partial pressure than CO2.
Nitrogen has a higher PSI than CO2 so these cartridges will not work with CO2 Mini Regulators.
Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Left Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
Used to determine level of remaining gas in the tank.
1/4” MPT Left-hand thread.
This chrome plated Draft Beer Faucet will keep your bar or kegerator looking great for years to come.
Industry standard faucet for draft beer that fits North American shanks and towers
Chrome Plated Brass body with quick action brass lever
Specifications:
Body Thread: 1 1/8” – 18 Thread (North American Beer Industry Standard)
Lever Thread: 3/8” – 16 UNC (Unified Coarse Thread); FIts standard tap handles.
Chrome Plated Brass Body
Brass Lever
G-Type keg coupler for Anchor Steam and some other European kegs
Pull-to-engage ergo lever handle
Includes 3/8" OD barb for gas inlet
Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs.
Will also fit:
Abbot Ale
Anchor Liberty Ale
Anchor Porter
Anchor Steam
Bass Pale Ale
Blackthorne Cider
Caffrey's
Fuller's ESB
Fuller's London Pride
Grolsch
Old Speckeled Hen
Rouge
Scottish Tennents
Sir Perry William's
Watney's
Young's
Young's Chocolate Stout
Young's Oatmeal Stout
Young's Ram Rod Bitter
Young's Special London Ale
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How does one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
1/4” MPT Right-hand thread.
This plastic faucet with a burgundy finish is made in Germany and assembled in the United States. It is a very durable faucet made of the same food grade plastics as the CMB Disconnects. It features a stainless steel lever that will hold up to commercial handles.
Burgundy plastic body features a durable stainless steel lever
Plastic spring-loaded shaft and chrome-plated brass bonnet and collar
Standard threading is compatible with most branded tap handles
Easy to clean design. Disassembles in seconds. Features food grade plastics for sanitary use with all beverages.
Spout is removable and can be replaced with shorter spout for beer
Used in commercial applications, bars and restaurants all over the world!
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
