Homebrew Cleaning Equipment

Our favorite brewer gloves are made from a chemical resistant PVC that protects your hands from harsh cleaning chemicals. With a length of 21.5 in, these elbow length gloves allow you to reach into liquids while protecting your hands and forearms.  We also like these gloves because they offer more heat resistance than the standard green brewing gloves.  Great for cleaning your brewery and handling brewing equipment in a sanitary way!    Kegland Part Number: KL05289

Read more less

You’ll never regret owning the right tool for the job!   This line brush is 1/4” in diameter and 36” long. You can use it to clean any 1/4” ID tubing in your brewery or draft setups. The long handle makes it convenient for long lengths of tubing.   Use it to clean: Draft lines Keg dip tubes Down tube on your Cornelius keg Racking canes Any tube or line that is 1/4” in diameter

Read more less

Quickly clean kegs and fermenters while you tend to other tasks High flow rate pump provides a powerful blast that coats the inside of the vessel Use it for cleaning or sanitizing with your favorite solutions 15L bucket provides a much larger reservoir compared to other models Everything included in the system neatly fits inside the bucket for easy storage The Bucket Blaster is a convenient and effective system for cleaning and sanitizing kegs, carboys, and other brewing vessels. The beauty of the Bucket Blaster is that you can set it and forget it. Simply set up the keg washer basin with your cleaner or sanitizer, set your vessel over the jet nozzle, power up the pump and let the Bucket Blaster do the work while you tend to other tasks. Perfect for homebrew kegs, carboys, FermZillas, or bucket fermenters. This unit comes with a 15L (3.9 gal) bucket, which doubles as a storage container when you are not using the system. Other keg washers come with a very small reservoir that make it a pain to move, as liquid spills over the sides easily and generally they just do not work as well. The Bucket Blaster's large 15L reservoir makes it much less likely for you to spill liquid on the floor, and since it can hold more cleaning solution, each cleaning cycle will be that much more effective. Includes: Submersible Pump - 2,000 L/hr 15L Bucket Powerful Jet Nozzle 9.5 mm EVABarrier Tubing Gray and Black Ball Lock Disconnects Duotight fittings for all connections Kegland Part Number: KL15905    

Read more less

This bottle brush design has stood the test of time.   This traditional design Beer Bottle Brush, is perfect for cleaning 12 to 22oz beer bottles. If there is any stuck-on residue or dust in the bottom of your bottles the rounded end of the brush will reach in and scrub it out!    Includes circular metal loop for hanging.    Bristles are 2.75" in diameter with an overall length of 16"

Read more less

Clean-in-place your BrewZilla by using the built-in low volume pump Recirculate brewery wash and let the CIP Spray Rotor do the work! Only requires a 6W pump to spin the rotating head and get full effectiveness Easily adapted for use to clean fermenters and other vessels Finally! A CIP spray head designed specifically for use with smaller homebrew pumps. There are a lot of stainless steel CIP Spray Balls readily available for homebrewers but they require a fairly beefy pump to spin the head and make it effective. The new Low Volume CIP Spray Rotor can provide full spray coverage with as little flow rate as 3 gallons per minute. This makes cleaning your BrewZilla an absolute breeze by simply recirculating cleaning chemicals and letting the CIP Rotor spray down the inside of your brewery. Also a great option for brewers using the MKII Magnetic Drive Pump as the spray head can easily be adapted to clean all sorts of fermenters. What Can it Do? Clean-in-place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to. Recommended for low voltage pumps as low as 6W up to 25W (roughly 3–5 GPM). If using a more powerful pump, you may need to throttle back the flow rate so you don't overpower the spray rotor. Includes: Custom molded rotating spray head with 1/2" BSP thread 11.8" (300mm) length of silicone tubing suitable for your BrewZilla recirculation arm Stainless nut and barb Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down. KegLand Part Number: KL04329

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 3/8“ x 48” line brush is flexible and easy to use,great for cleaning 3/8" transfer tubing.

Read more less

A perfect size, food-grade, bucket that is a perfect fermenter for doing 1 gallon fermentations. Ideal for your next small batch of homebrew or fruit wine. Also a great container to store grain in. Wide opening allows for easy cleaning.  Lid sold separately. 9-1/4" H x 9-1/2" D (without lid) 9-7/16" H x 9-15/16" D (with lid)

Read more less

Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. This keg cleaner is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Quiet, Fun, & Easy to Use Very quiet when in use and most importantly speeds up the process of cleaning and sanitizing.    Light in weight.  Easy to store.  Cleans Kegs This keg washer cleans and sanitizes a cornelius keg without having to take apart the ball lock fittings, poppets, and dip tubes. You can clean the keg and the dip tube simultaneously using the T adapter. Cleans Tubing Too Cleans tube separately utilizing the pump with the additional barb fittings included.  Cleans Parts Reservoir holds 1.25 gallons of water making it easy to fill and empty with sanitizer.     Saves water and sanitizer.  The keg washer does not have an on/off switch, you can plug it directly into a wall outlet to operate the pump or plug it into an outlet that is controlled by a switch. Never leave the keg washer unattended when in use. When in use, fill the keg washer up to about 1 inch under the brim. The pump is not self priming, so always make sure the basin is full of water before plugging in the pump. Owner's Manual is included. Please read thoroughly before using. Dimensions of the inside of the washer's reservoir are: 6"L x 12"W x 4"D. Please Note: Product does not include the bucket, carboy, or keg pictured above for display purposes. The pump specs are: 520 GPH 120 Volts AC 40 watts Ceramic shaft, impeller  

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 1/2“ x 48” line brush is flexible and easy to use. Great for cleaning 1/2" transfer tubing, especially if the line was used with a carboy hood as a blow off.

Read more less

Bottle washers make clean up and bottle maintenance much easier to deal with!  Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!   Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.

Read more less

Easily connects the Bottle & Carboy Washer (CE10) to most kitchen sink faucets. Stainless steel construction.   Comes with two washers. For outside threaded faucets use adapter with only one washer; for inside threaded spout use both washers. Simply unscrew the screen assembly at the end of your faucet and screw the adapter in place.   Bottle & Carboy Washer sold separately.  

Read more less

You clean your equipment to remove bacteria. Make sure the tool you’re doing it with doesn’t leave scratches that actually promote bacterial growth!   These pads are made of soft, woven fibers making them ideal for equipment cleaning. They are tough enough to scrub off scum and debris without scratching most surfaces. These scrubbers are the best choice for cleaning stainless steel. Also good for chrome, copper, porcelain, glass, and plastic!    9" L x 6" W x 1/4" thick. Sold in packs of three.

Read more less

Tight fitting lid for our 2 Gallon, food-grade, bucket fermenter, JAR20. 

Read more less

This L-shaped brush is the perfect tool for scrubbing every inch on the inside of carboys, and thanks to the plastic coating, they're also safe to use with plastic fermenters and PET carboys. Normal carboy brushes like our CE40 are great for cleaning glass carboys, but can be a risky choice for using on plastic. The metal rod where the bristles attach can scratch plastic, creating hide outs for bacteria. You won't have those worries with this carboy brush! Bristles made from Food Grade nylon Long enough to reach deep inside large carboys L-shaped bend allows you to easily scrub off leftover krausen residue Height from end of handle to 90° bend - 21.5" Brush section with bristles is 8.5" long Bristles are 2.75" in diameter Temperature rated to 140°F (60°C)  

Read more less

BrewBuilt CIP Spray Ball for use with X-Series Uni Conicals or any stainless steel fermenter with 1.5" tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp spray easily removes soil inside your tank. The long neck design allows the spray ball to reach through tall fittings and ferrules. With a welded 90° elbow inlet, you won't have any trouble with kinked hosing slowing your pump flow and lowering the spray ball's performance. A pump capable of 30-45 psi and 11 GPM is recommended for this product to provide a high pressure cleaning radius of 3.6 ft. When used with BrewBuilt conicals, 7 GPM is enough to coat the full interior of the fermenter, but longer CIP runs might be required to fully breakdown stubborn solid deposits.

Read more less

Scrub your beer bottles clean with this bottle-shaped brush. Soak bottles in your preferred cleaning solution, scrub the inside with the bottle washing brush, and rinse. 17.5" long. Bristle section is 12" long. Kegland Part number: KL12997

Read more less

Copper scrub pads are great for cleaning stainless steel equipment, and can also be used as packing material for pot or reflux stills to enable the release of sulfides. Made from pure lead-free copper.   Kegland Part number: KL08907  

Read more less

If you want to keep your draft faucets clean, you’ll dig this special brush dedicated specifically for the job. This brush is the right diameter to give the interior of your faucet a good scrub, and short enough to avoid being unwieldy.    Ah, there’s nothing like the right tool for the job.   About 3/4" diameter.

Read more less

Italian-made wine bottle brush. You might like this design because it has a tuft on the end that is good at getting the corners of your bottles.  Customers also like this brush for the easier entry and exit into the bottle neck compared to other brushes. Plastic handle is a little easier to grab as well. Made in Italy 18" long x 2.25" Diameter. 

Read more less

You love your Carboy Cleaner so much that you’ve worn out the cleaning pads!   A set of replacement pads and washers for The Carboy Cleaner™. The ease and convenience of the Carboy Cleaner can’t be overstated. After you’ve used it to clean enough carboys and kegs, you will need to replace the cleaning pads.   Set of 2 replacement pads and 4 washers for The Carboy Cleaner™.

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 1“ x 48” line brush is flexible and easy to use. Great for cleaning 1" tubing, especially if the line was used as a fermentation blow off.

Read more less

Used to clean the inside of tubing using a pump. Place in the line, hook up to the outlet of the pump and push through the line. Be careful not to suck into the pump head! Available in sizes for 1/2", 1", 1.5" and 2.5" inner diameter tubing.

Read more less

This stainless steel bucket strainer is an excellent accessory to make cleaning and sanitizing your brew hardware quick and easy. Place the strainer inside a bucket of cleaning solution or sanitizer and then toss in your tri-clamp fittings or other parts. When you're done, simply pull the basket out of your bucket using the handle and all of your hardware will be conveniently contained in the basket. No need to submerge your whole arm into chemical solutions to fish out parts! Made by ForgeFit so you know it is heavy duty.  9.875" H x 8.25 Ø Please note: the dimensions of the strainer are not the same as the inner dimensions of a standard 6-gallon bucket. The strainer was designed to fit multiple sizes of buckets, so it will not be as wide or tall as larger sized buckets.

Read more less

Italian made carboy cleaning brush that is 23 inches long overall.  Brush section at the bottom is  6 inches long x 2-1/4 inches wide. Whte plastic handle with hook and hole for hanging. Made in Italy by Ferrari.

Read more less

This stainless steel CIP spray ball kit is perfect for homebrew conical fermenters as many popular units out there feature a 4" T.C. top port or clamp-on lid with 4" T.C. ferrule. Tri-clamp gasket not included. Kit Includes: 4" T.C. Cap with 1.5" T.C. x 1" BSP Male Thread connections 1" BSP x CIP Spray Head Requires pump with 12 GPM flow rate KegLand Part Number: KL22989

Read more less

Clean in place with this filling and cleaning lid for FD-Style Speidel Fermenters.  Just attach CIP Spray Ball (included) and pump hot water through to clean your fermenters.  Use to maximize aeration when transferring wort into your tank. Generally speaking this lid is pretty sweet! 1" MPT inlet w/ 1" Pipe

Read more less