Beer Brewing Equipment & Supplies

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.

Read more less

Manage your fermentation temperature like a stone-cold pro with the BrewBuilt Chilling Pump Kit! This kit can use either ice water or glycol as a chilling solution, which is then circulated through your chilling coil or cooling jacket by the included submersible pump. Available with either 800 or 1300 gallons per hour flow rate and a max lift height of nearly 10 feet, this unassuming pump is powerful enough to circulate your cold solution with ease. And with the Inkbird Dual Stage Temperature Controller running the show, you can feel confident that your fermenters are getting the chilling power they need, when they need it. Submersible Pump ​If you're searching for an affordable pump to use with your temperature control system, look no further. The BrewBuilt Chilling Pump Kit comes with either a 800 GPH or 1300 GPH submersible pump that can be used with an icebank or glycol chiller. Don't be fooled by the low-profile compact design. With such high flow rates and a max lift height or nearly 10 feet, either of these pumps is sure to keep the solution moving in your chilling system. In general, we recommend the 800 GPH pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons, and the 1300 GPH pump for maintaining any batch size fermentation that is between 10 gallons and 2 bbl. Maximum flow rate: 800 GPH or 1300 GPH Max Lift Height: 9 or 10 ft. High quality motor provides a quiet environment (60W or 100W) Stainless steel impeller shaft for long life span and corrosion resistance 6 ft. long power cord Inkbird Digital Temperature Controller The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to protect your heating and cooling devices. The Inkbird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from brewing uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in Chilling Pump Kit Includes: Submersible Water Pump (PMP601 or PMP602) Inkbird Dual Stage Digital Temperature Controller (FE640) 2x 5 ft. lengths of 3/8 in. Silicone Tubing (H983) 4x Butterfly Hose Clamps Stainless 3/8" Barb x 1/2" MPT Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it's being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58°F - 88°F, and has 1/2" in and out posts. Note- Clean with mild detergent only, using warm (no hotter than 140°F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.

Read more less

Measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Unit has volume markings. Suitable for all general lab work. 250 ml.

Read more less

Male Garden Hose Thread on one side, 1/2" OD Barb on the other. Useful for setting up your wort chiller and water filter.

Read more less

Use this insulating jacket to regulate the fermentation temperature in your 55L FermZilla Conical. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL11495

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Grab everything you need to ferment under pressure with the FermZilla All Rounder and we'll toss in the BlowTie Spunding Valve for FREE! This kit includes the 60L FermZilla All Rounder, ball lock cap adapters for the lid and collection container, floating dip tube with filter attachment, and the BlowTie 2 ball lock spunding valve. Everything you need to ferment under pressure, carbonate in vessel, and pressure transfer. The FermZilla All Rounder is the most affordable pressurizable fermenter on the market. Although it doesn't feature a dump valve like the FermZilla Conical, the All Rounder carries the same pressure rating, making it an absolute steal if you're looking to ferment under pressure, perform pressure transfers, or want to carbonate and serve directly from the fermenter. The All Rounder is made from super smooth PET that's easy to clean, and the simple design means no nooks or crannies for microbes to hide. With a 4.75" lid opening, you'll have no trouble getting your arm inside to scrub away stubborn krausen rings. As with all FermZilla fermenters, the lid features molded drill locations that make installing accessories like a thermowell or Temp Twister Cooling Coil a breeze. Why MoreBeer! loves the All Rounder FermZilla: Super smooth PET makes cleaning very easy. Pressure rated lid and PET material make for a better oxygen barrier than fermenters made of HDPE. Lightweight and easy to move around, yet strong enough to be considered shatterproof. The 4.75" lid opening makes it easy to get your arm inside and clean after use. The lid is designed for the easy installation of accessories such as a thermowell or cooling coil. Price! A pressurizable fermenter in this price range is an incredible value, and it opens the door for many cold-side processes that can't be done in a normal carboy or plastic fermenter. What's Included: FermZilla 60L All Rounder Fermenter Stainless Steel Stand Stainless Steel Handle Top Lid with PRV (35 psi) 3-Piece Airlock Adhesive Thermometer (1) Red Ball Lock Carbonation Cap (1) Yellow Ball Lock Carbonation Cap Use one color for gas and one for liquid! Stainless Steel Float with Silicone Dip Tube Weighted Mesh Filter Attachment (KEG6571) All Rounder Stand Harness FREE BlowTie Spunding Valve FermZilla All Rounder Specs: 60 L (15.9 gal) Total Volume Pressure Rated to 2.5 Bar (36.2 psi) Height in Stand - 34" Height w/ Airlock - 36.5" Tank Diameter - 13.9" Lid Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the PET tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer liquid into the tank below 131°F or to use hot liquids below this temp to clean the tank. When under pressure, you should make sure to keep your unit in an environment no hotter than 95°F and to keep your fermentation temperature below this temp as well. If you are using kveik yeast to ferment under pressure, we highly recommend using temperature control. Installation Note: For best performance with your Floating Dip Tube, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in late January. Leg extensions for the new Blichmann Hellfire burner.

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump model has 1.5" tri-clamp inlet and outlet, allowing easy integration with your T.C. kettles or fermenter! We recommend setting these pumps up with a butterfly valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Center Inlet Pump Head Food Grade up to 250° F 1.5" tri-clamp inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!  

Read more less

Single piece, clear, 19'' long sample taker for taking hydrometer samples out of carboys. Insert into carboy, allow to fill, place your thumb over the top hole and remove.  In a hurry?  You can suck on the top to speed up the process. 1-1/8" outer diameter.

Read more less

Elevate your brewing game with the 220V 17 Gallon Gen 4 BrewZilla. This cutting-edge system combines more power & capcity with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch! WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 41.5 lb capacity, the BrewZilla can mash nearly 20% more grain than similar sized models of the Anvil Foundry and Grainfather G70. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 17.1 gallon total capacity with a finished beer output of 10-12 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA 6-30P plug Requires NEMA 6-30R receptacle Requires 16 amps from 30 amp circuit Triple heating elements (2000, 1000 and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 36" H (with recirculation arm) x 16" D Recommended max. grain bill: 41.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Flow: 5 gal/min Max Head: 11 ft. Voltage: 220–240V-AC Frequency: 50–60Hz Power: 25 watts Fittings: 1/2" (13 mm) barbs You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950hose clamps and (1) brass hose by thread adaptor (H508). These items come in the Wort Chiller Connection Kit, add the kit to your cart and use code ZILLAKIT at checkout. KegLand Part Number: KL27458 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use. 35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge

Read more less

This false bottom fits great inside a 10 gallon mash tun, like our Rubbermaid coolers.   Due to it's domed shape, this particular false bottom can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   This false bottom can be used in converted Sanke kegs as well.   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

Read more less

The redesigned FermZilla Collection Container attaches directly below the fermenter without the need for a screw top adapter piece Replace your existing 600mL, keep a spare on hand, or upgrade from the original tri-conical collection container with the 3" x 3" Tri-Clamp Butterfly Valve Made from heat resistant, plasticizer-free Tritan plastic and dishwasher safe PCO1881 side ports for use with Ball Lock Carbonation Caps and the PRV Cap Combo 3" tri-clamp, gasket, and end cap included This collection container fits all FermZilla Tri-Conicals with a 3" x 3" Butterfly Valve. No more threads or oil filter removal tools to get this off, simply depressurize and remove the tri-clamp fitting. We recommend placing a towel or upside down frisbee to catch some drips. The clear body is made from Tritan from Eastman Plastics which is heat tolerant and BPA- and plasticizer-free. The ports on the side are the same as a standard coke bottle or soft drink bottle (PCO1881). These are also the same on the top of the FermZilla lid and the previous model collection container. Owners of the FermZilla Tri-Conical that came with the 2" T.C. collection container can upgrade to this collection container by swapping their butterfly valve to the 3" x 3" Tri-Clamp Butterfly Valve. Recommended Accessories: 1 x Ball Lock Carbonation Cap (FE13 or FE146) 1 x Red PRV Cap Combo (KG524) Includes: 600mL Tritan Plastic Collection Container 3" Tri-Clamp Ferrule PCO1881 Carbonation Cap Ports 3" Tri-Clamp (3-Piece) 3" Tri-Clamp Silicone Gasket 3" Tri-Clamp Black Polyketone End Cap Dimensions: 6.7" Tall Tapers from 3" ferrule down to 2.5" diameter bottom KegLand Part Number: KL3036

Read more less

Filter pad number 2 from Buon Vino for Polish Filtration. Fits the Buon Vino Mini Jet (FIL20). Requires one 3 pack to run the filter. Fine are approximately 2 microns.

Read more less

Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.

Read more less

Stainless steel barb fitting. 1/2" male BSP x 13mm barb (0.51"). KegLand Part Number: KL03629  

Read more less

EJ Beverage High Temp tubing is perfect for use on the hot side of your brewing system.  When compared with traditional Silicone this tubing is less likely to kink at higher temperatures. It is constructed of TPE (Thermoplastic Elastomer), which is an excellent alternative to high temperature PVC and Silicone.  The advantages to this high temperature tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 3/8” ID x 5/8” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 54 psi Working pressure of 18 psi  

Read more less

Let this mash paddle unleash your inner Pro Brewer! This 36 inch, 100% Stainless Steel Mash Paddle is perfect for any size mash tun. It can stir large volumes and it’s a snap to clean and sanitize. The paddle itself is a solid piece of stainless steel with no holes in it. Because there are many different theories about mash paddle design, this paddle is left solid so that you can customize the hole pattern to your preferences. If you like, we do offer one drilled configuration, the AG431A.

Read more less

Achieve a perfect whirlpool everytime with Blichmann's weldless whirlpool kits. They come with 2 different options for the valves. You can get the Blichmann linear flow valve or a 1.5 in TC butterfly valve. Regardless of which valve you choose you can hook up a pump and get a strong whirlpool action to help you settle out some of that unwanted trub! Note: These kits require a hole in your kettle of about 13/16 in. You may drill this hole yourself using the instructions in the documents tab or use these kits if your kettle already has a hole.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

This insulated tubing kit was developed specifically for the BrewBuilt Jacketed Conical. It has all the fittings needed to connect an IceMaster Glycol Chiller to the conical jacket's 1.5" tri-clamp inlet and outlet—plus premium quick disconnects with shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet. Insulated tubing will now only provide increased chilling efficiency, it will also eliminate line sweating so you don't need to wipe up puddles of condensation that might collect on your brewery's floor during fermentation or cold crashing. Kit Includes: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb 2 - High Temp Plastic Male QDs w/ 1/2" MPT 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters

Read more less

A 1/2" NPT nipple with a hex nut in the center for easy tightening and loosening. This coupler is made out of 304-stainless steel.

Read more less

Size 1 1/2" - 1 13/16" To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole.

Read more less

Turn your kettle into a Heat Exchanged Recirculation Mash System with the HERMS coil from Blichmann Engineering. Comes in two sizes, small for 7.5 to 10 gallon kettles, and large for 15 to 55 gallon kettles. Installation instructions can be found below under "Documents". 304 Stainless Steel Small HERMS Coil fits up to 10 Gallon Kettles Large HERMS Coil fits 15 to 55 Gallon Kettles Easy to install and sanitize bulkhead fittings! 1/2" NPT Connections Includes two 1/2" elbow QuickConnector™ fittings! Dimensions: Small - 7.75" (tall); 25' long tube Large - 9.5" (tall); 32' long tube   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Track your fermentation progress without ever disturbing your wort! The Tilt Hydrometer and Thermometer is added directly to your fermenter to provide real-time data on the current gravity and temperature of your wort, eliminating the hassle and potential contamination that comes from opening your fermenter to pull samples. The Tilt is especially useful for brewers fermenting in glass carboys or plastic fermenters that don't have spigots for sample taking. Designed for homebrewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using their free Google Sheets template or other 3rd party cloud platforms. Tilt's goal is to help homebrewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easier to track. Here are some of the new features of the Tilt: Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters. Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: Reduced power consumption so more brews, less battery changing. New Look: Newly designed custom circuit board and harness. If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color. Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop it in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1°F (+/- 0.5°C). Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

Read more less

Build your own walk-in cooler with a standard A/C unit from any hardware or appliance store! The CoolBot enables A/C units to cool below their standard setting of 60°F, allowing you to use them as a low-cost refrigeration alternative WiFi connectivity allows you to monitor and control your cold room from a smartphone with the free mobile app Installs quickly with no tools or electrical know-how required—see the videos below! Perfect for turning rooms or storage sheds into a fermentation locker, keg room, wine cellar, food larder, and More! The CoolBot Pro brings you all the great features of the standard CoolBot with added WiFi connectivity, allowing you to monitor and control your cold room from your smartphone through the free mobile app. The CoolBot Pro enables a standard air conditioner to cool a room or space down to 34°F. Easily installs with no tools or electrical knowledge required. The CoolBot Pro comes paired with the Jumper WiFi relay module, which installs on the outside of your cold room. Once the jumper is connected to your wireless network, you can use the free mobile app to control your CoolBot from virtually anywhere with a WiFi connection. Monitor your cold room remotely, adjust temperatures on the fly, or program the app to send you notifications if something is amiss. Whether you're on the go during a busy work week or taking some well-earned R&R, CoolBot Pro has your back! Standard A/C units available from any hardware or appliance store have lots of power, but they are electronically restricted to not go below 60°F.  This is because they would freeze up. Commercial refrigeration for walk-in coolers combat freeze with increased surface area on the fins and fans. Instead the CoolBot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60°F and not freeze up.  The CoolBot cannot give you 100% of the BTUs listed on your air conditioner, nor is suitable for large brewery or winery walk-ins. But it is perfect for wine cellars, beer storage, fermentation, and many other applications.  Easy to install within 30 minutes with no tools or electrical knowledge required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google CoolBot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service.   This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running.  Residential A/C units are made for efficiency. The CoolBot Pro will also shut down the compressor for a short time when the unit is running at its highest level of inefficiency, as it nears freeze up.   Features: Trusted CoolBot technology now with WiFi connectivity and mobile app Allows a standard window air conditioner to cool a room to 34°F Interactive refrigeration for Brewing, Winemaking, Restaurants, Agricultural Purposes & More Mobile app: remote temperature reading and adjustments, receive critical alerts, data storage and reporting Cool Bot Pro and Jumper WiFi relay module included Free mobile app features require WiFi connection Made in the USA Controller Dimensions: 6.5" x 3.4" x 1.1" Jumper Dimensions: 4" x 3.6" x 1.1" Please note: the instruction manual references a paid subscription for the mobile app. The mobile app is now offered for free, with no subscription required.

Read more less

No spills = No mess to clean up! With this funnel, you can pour with confidence!   Gain even more control when transferring liquid from one container to another with this unique 25cm (10”) Anti Splash Funnel. The high backsplash on this funnel helps prevent spilling and overflow, giving you more confidence when pouring. Fits all standard carboy necks.

Read more less

This extra-long spoon will be your brewing-day best friend!   This 28 inch long plastic spoon is made of heat-resistant plastic so it will not get soft or bend when stirring hot or boiling liquids. The nice long handle means no accidentally dipping your hand into hot liquid, and the extra-strong plastic means no straining to get the job done! Grab this Hi-Temp Plastic Spoon to keep in your brewing set-up. You’ll be glad you did.  

Read more less

Monitor and adjust your fermentation temp settings remotely via internet connection Set customized temperature profiles that will run automatically Access the RAPT portal to review previous fermentation temperature logs Red & Blue power sockets to clearly identify your heating and cooling outlets For untethered probe readings, switch the temp reference to the RAPT Bluetooth Thermometer Mobile RAPT app available of iPhone and Android The RAPT WiFi-enabled temperature controller allows you to monitor, track and control heating and cooling devices remotely via any internet connection. Log in to the RAPT portal from any web browser, or download the RAPT app from the Apple App Store for iPhone or Google Play for Android. From the portal, set up your own complex temperature profiles and the RAPT controller will make the temperatures adjustments automatically according to your schedule. The color screen clearly displays temperature, graph of future and past temperature settings and makes it much easier to perform profile temperature steps. This plug and play temperature controller has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. Each 110V power outlet is rated to 10 amps (1200 watts max). PID Included This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation. Temperature Range The temperature range of this device will enable you to control devices from -4°F to 248°F (-20°C to 120°C). Various Mounting Options This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brew system. Simply unscrew the mounting plate and switch the mounting to your preferred orientation. A mounting plate is included with controller, and you can even adjust the routing of the cords to come out the back of the controller, allowing you to stand up the controller and set it on a table or benchtop. RAPT WiFi Compatible This product will connect with the RAPT portal. This portal will enable you to monitor, control and log past temperatures, and also show a future projection of temperature profiles that you might have running. What is RAPT? RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It's a free service whereby any RAPT-enabled product can both log and store data to the hub where you can conveniently access it. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notifications in the off chance that something doesn't go to plan. Specs: WiFi & Bluetooth Enabled Free companion app available for iOS or Android devices Customize temp profiles and view logged data from the RAPT portal via web browser Simple plug and play design with LCD display Adjustable heating/cooling differentials Temp Range: -4–248°F (-20–120°C). Probe Relay Length: 6.5 ft. (2 m) Probe Diameter: 0.15" (4 mm) 110-120V 15A KegLand Part Number: KL2605

Read more less

This stainless steel strainer is 10.25" in diameter, and features a double mesh basket with a wooden handle. Great for straining hops, wort, and adjuncts during the brewing process.  

Read more less

The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won't find a more powerful feature rich product.   These systems will ship free to anywhere in the contiguous United States.   Features: Switchable Between 120V 1600W and 240V 2800W for Faster Heating & Better Boils. Unique High Flow Grain Basket with 150% More Perforations to Virtually Eliminate Stuck Mashes. Large Capacity Increases Efficiency and Grain Capacity. Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds. Ultra Low Watt Density, Triple Element Heaters - Won't Scorch. Linear Digital Power Control and Solid-State Switching for Fine Tuning your Boil. Turbo 500 Distillation Ready. Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings. Optional External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too. Three Sizes Available: 18 Gallon for 10 gallon batches, 10.5 Gallon for 5 Gallon Batches and 6.5 Gallon for 2.5-3 Gallon Batches.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less. Caution! Do not CLAMP the lid in place while boiling. The steam buildup can lead to severe burns.  The lid should only be clamped when used for distillation. Read all instructions and practice safe brewing.

Read more less

This stainless 4" tri-clover ball lock lid is a direct replacement to the lid that comes on our kegmenters.  Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty Kegmenter, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the keg.

Read more less

A simple, reliable way to test the pH of your beer, no meter required!   Quickly test the pH of your mash with confidence using our colorpHast pH strips. These strips are high-quality and made not to run, so you are assured an accurate reading each time. Comes in packs of 100 strips.

Read more less

#2 stopper - solid. Top diameter 0.83 inches (21 mm), bottom diameter 0.63 inches (15.8 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet.  Max. Temperature Rating: 158 °F (70 °C).

Read more less