New Products Check out what's hot & new
SIGN UP FOR SMS Get deals sent straight to your phone
Detecting your location...
EARLY HOLIDAY DEALS Up to 35% off brewing gear Hundreds of items marked down · No code needed
Shop the Sale

Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.

    Description

    If you want to install the Temp Twister & Thermowell on your FermZilla's plastic lid, this step drill bit is the recommended tool for the job. Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many KegLand drip trays.

    For best results when drilling through metal, make sure to drill slowly (less than 600 rpm). Apply significant pressure behind the drill as you cut through. Cutting lubricant is recommended. Note that fast drill speeds will cause the metal and the bit to heat up which can shorten the lifespan of the drill bit.

    Specs:

    • Drill Speed: 200-800 RPM
    • Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm
    • Hole Size Range (Imperial): 0.15" – 0.78"
    • Coating: Titanium Nitride
    • Suitable for: Metal, wood, plastic
    • Tip: Self starting tip (no pilot hole required or center punch)

    KegLand Part Number: KL09447

     

    Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.

      Product form

      SKU: H1015

      <p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>

      $10.99

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Description

        If you want to install the Temp Twister & Thermowell on your FermZilla's plastic lid, this step drill bit is the recommended tool for the job. Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many KegLand drip trays.

        For best results when drilling through metal, make sure to drill slowly (less than 600 rpm). Apply significant pressure behind the drill as you cut through. Cutting lubricant is recommended. Note that fast drill speeds will cause the metal and the bit to heat up which can shorten the lifespan of the drill bit.

        Specs:

        • Drill Speed: 200-800 RPM
        • Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm
        • Hole Size Range (Imperial): 0.15" – 0.78"
        • Coating: Titanium Nitride
        • Suitable for: Metal, wood, plastic
        • Tip: Self starting tip (no pilot hole required or center punch)

        KegLand Part Number: KL09447

         

        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 0.1 lb
        • 5 stars: 0 (0%)
        • 4 stars: 1 (100%)
        • 3 stars: 0 (0%)
        • 2 stars: 0 (0%)
        • 1 star: 0 (0%)
        R
        Ray Gilmore
        Quality but small

        This is a very good product but a tad small for most uses. If you are trying to install a spigot you need a bigger bit. This only goes to .7 in and the spigot I got was 1 inch. It is very well made and will last a lifetime of drilling for stoppers and stuff.

        Login

        Forgot your password?

        Don't have an account yet?
        Create account