Beer Brewing Equipment & Supplies

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. 7/16 inch ID tubing is recomended for use with 1/2 inch Auto Siphons. Thin wall tubing is recomended for siphoning and transferring liquids. For pumping, keg lines, or other pressurized applications, see our thick wall and keg tubing.  

Read more less

"O"- ring for 10" Water Filter Housing FIL32a

Read more less

Handling up to 65lb of grain, this large scale from Anvil can measure big bags of grain with a 0.02lb accuracy. The large 12.5" x 11.75" weighing surface supports almost any size bucket or container. The remote LCD is movable and mountable allowing you to put it in the most convenient place to see the weight in either pounds or kilograms.

Read more less

This therm features a 2" face, 9" long probe, and an adjustable kettle clip that displays the face at a convenient angle for hands-free viewing. 0-220° F range (-15 - 110° C). Calibration screw behind the face for adjusting temperature to a known standard.

Read more less

The perfect pump for use after fermentation! Self-priming and easy to use for transfers between carboys or kegs Included pre-filter removes solids from your liquid and features a quick disconnect design to easily remove the filter for cleaning Adjustable flow rate from 0 to 3 gallons for gentle transfers and slowly pushing finished beer through plate filters Diaphragm pumps are gentle on the liquid passing through them with much less turbulence and aeration compared to magnetic drive pumps The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Includes tubing and clamps—ready to use out of the box! Why This is a Great Pump: Self-Priming Heat Tolerant materials to 212°F when used with Silicone tubing Speed Control! Gentle Diaphragm Design Self Priming: This pump is capable of pumping gasses, meaning that pumping does not require priming! This makes transfers between carboys or kegs incredibly easy. Simply put both inlet and outlet hoses in a bucket of sanitizer and run the pump for a minute. You're then good to transfer your beer with your sanitized pump! Removable Pre-Filter: This is something which is almost always necessary on diaphragm pumps, as the diaphragm itself is very delicate, and can be ruined by small solids. The pre-filter included on this pump will work to keep solids out of the pump, extending the working life of the unit. And the filter can be removed between uses for cleaning. Heat Tolerant: All materials used in the construction of the pump tolerate temperatures up to 212°F when used with heat tolerant tubing such as silicone.  Because the pump comes with vinyl tubing you would need to replace that tubing with silicone.  Speed Control: Perhaps the most unique feature is a dial control to adjust flow from 0 to 3 gallons per minute. Use it to send your wort from the kettle to the fermenter, or even after fermentation to send beer through a plate filter (such as our FIL45). Gentle on your Beer: A diaphragm pump works by moving beer through one pulsating diaphragm into the next. It is a design that is very gentle on the liquid being pumped. When this pump was first introduced to us, we loved the idea, but had concerns that the speed control would compromise the longevity of the motor. We've built much larger pumps and normally you need a $700 frequency drive to control motor speed. However, we've been selling this pump since the mid-2000s and it continues to perform well and receive excellent customer feedback. This pump comes with 1/2" barbed ports for easy connectivity Comes with 4' tubing on both sides Heat Tolerant materials to 212°F (when used with silicone tubing) 110 Volts, 0.5 Amp, 60 Hz.

Read more less

MoreBeer!'s Patent Pending sparge arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system! To use, simply install on your kettle wall, tighten down the stopper bumper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.   Features 100% stainless and silicone construction Two adjustment knobs make it extremely universal Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation Included check ball will prevent back flow Can adjust from the top of your kettle to 12-13 inches down into your kettle A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc. Can be mounted on a lip that is up to 7/8" wide Has a 1/2" FPT ball valve

Read more less

Plumber's tape, or PTFE thread seal tape, is used to connect NPT (national pipe thread) style threads. Use three wraps for brass and six wraps for stainless steel. 1/2'' wide x 520'' long roll.

Read more less

Keep an eye on your temps with the BrewBuilt tri-clamp thermometer. Perfect for stainless conical fermenters or T.C. kettles. The 3" diameter dial face is easy to read and scaled in °F and °C. The 6" probe length provides the thermometer with plenty of exposure for more accurate readings. 3" dial face 6" probe 1.5" T.C. Reads in °F and °C  

Read more less

O Ring for Beer & Gas Line QD (for H550A)

Read more less

If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy is a great value if you're looking for a stainless steel fermenter with built-in heating control. If you live in a cold climate, ale fermentations may be a seasonal affair, as cold ambient temperatures can easily drive down the temperature of your wort below your yeast's optimal fermentation temp range. The Bucket Buddy offers a simple solution with an integrated heating element and digital temperature control. Program your fermentation temperature and if the temp drops below your set point the unit will gently heat your wort from the bottom up via the concealed element located in the base. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be taped to the side of the fermenter to control your cooling source, or you can drill another spot in the lid for a thermowell. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. To help maintain a steady temperature and cut down on power consumption, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket or the FermZilla Insulating Jacket. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: 304 stainless steel construction 9.25 gallon total capacity Digital temperature control 110V / 36W power Stainless steel outlet valve with rotating racking arm Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. Testing has shown that the Bucket Buddy can heat to 104°F in a room temperature ambient environment without insulation. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL20695

Read more less

Clean up your beer and give it that sparkling clarity you see in commercial brews. Filtering removes yeast and dry-hop sediment, both of which can impart off flavors. It's also a great way to give your beer that extra edge in competition. This two-pack of filter pads are for use with our FIL45 series of plate filters. Polish pads will provide between 1-2 Micron filtration.

Read more less

This is a Blichmann Spare Part for the BeerGun Bottle Filler. Replacement Clip. Fits all models of the Blichmann BeerGun.

Read more less

Replacement O-ring kit for Blichmann RipTide™ pump.  

Read more less

No need to spend a ton of money on other paddles! This 24 in. Plastic Mash Paddle will get the job done!   The 24 inch Plastic Mash Paddle is a great and inexpensive way to stir your grain when doughing-in. It easily breaks up any clumps of grain in your mash, preventing dough balls from forming. Homebrewers love it because the durable plastic paddle will not scratch plastic mash tuns. These are 24" in length, a great size for 5 gallon cooler mash tuns!

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in early March. No more spillovers! Set your desired volume and walk away Automatically collect water while you tend to other tasks Great for collecting brewing water or mixing your cleaning and sanitizing chemicals Illuminated display in splash resistant housing Integrated solenoid valve cuts off flow when your set volume is dispensed 1/2" BSP inlet and outlet work well with Duotight or Type A Camlock fittings Unlike other hose timers that simply measure time, the Fill-O-Meter measures volume and will automatically turn off when the programmed volume of water is dispensed. Enter your desired volume of water, press Start, and tend to other brew day prep work. Install in-line with your water filter to automatically collect filtered strike water, or measure out how much water you need to mix with cleaning chemicals for a precise dilution ratio. We recommend setting up the Fill-O-Meter with either Duotight fittings or Type A Camlocks. Thread tape will be required for the Camlock. Use sparingly as too much plumber's tape can damage the plastic thread. And it is very important to never overtighten! Displays real time flow rate and volume (Liters/Min or Gallons/Min) Accurately measures and controls volumes at flow rates from 1-30L/Min (0.26-7.9Gal/Min) Never overfill or spillover again Splash resistant housing Great for filling tanks, brewing kettles, distilling gear, mixing liquid and many other applications Integrated flow meter and solenoid valve Illuminated display for usage in the evening Integrated sound alarm Easy 1/2" BSP Inlet and Outlet Automatic failsafe - flow is stopped if the unit loses power Important Notes: DO NOT flow liquid the wrong direction, it will break the unit. DO NOT overtighten fittings onto the 1/2" ports. DO NOT exceed temperatures greater than 104°F (40°C) through the unit. Specifications: Flow Range: 1-30L per minute Temperature Range: 32-104°F (0-40°C) LCD: 3 inch back lit display Housing Material: ABS Input/Output threads: BSP 1/2" Pressure Rating: 0-12bar (0-180psi) Accuracy: +/- 5% Please Note: Accuracy can be improved with stable flow. Repeated start/stop or variation in water supply can have negative effect on accuracy. If you are noticing innaccurate fill levels, see the instruction manual for calibration instructions. KegLand Part Number: KL14694

Read more less

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or see if that mouthwatering tri-tip is ready to be pulled off the grill. With a range of -58°F to 572°F there's basically no way you won't get a temperature reading unless you live in an active volcano (do not recommend). Specifications: Range: -58°F – 572°F (-50°C – 300°C) Resolution: 0.1°C Temperature Error: +-1°C (0~100°C) Power Supply: 1 x AG13 Battery (included) Functions: On/Off °C/°F Hold KegLand Part Number: KL23320

Read more less

The BrewLab Plus® water test kit, model 7188-02, for home brewers quantifies 8 important water test factors. Includes everything in BrewLab Basic kit plus a high quality digital pH meter for monitoring batches from start to finish. Experts agree water conditions affect your final product, so take the mystery out of making great beer. Trust LaMotte, the water analysis experts since 1919, to help you control your most important ingredient—water! Visit HomeBrewFinds.com for a hands-on review of the LaMotte BrewLab water test kit. For more information on water and its role in the brewing process, check out Water, A Comprehensive Guide for Brewers written by John Palmer and MoreBeer!'s own Colin Kaminski. For help with water adjustments, download Palmer's Brewing Water Adjustment App, currently available for iOS devices and coming soon to Android. See the Documents Tab above for additional information.

Read more less

This thermometer will be a great addition to your homebrewing setup. The shorter 2.5" probe works great in a boil kettle or hot liquor tank because it’s easier to work around. Keep in mind that some brewers feel this is too short for a mash tun and prefer a longer thermometer which reaches closer to the center of the mash. (See our MT514 for the same thermometer with a 6" probe.)   Thermometer has an easy-to-read 3" Face, and 1/2" MPT threads on the back to connect to your kettle. The metal stem is durable and won’t break like glass can. Our reviewers agree that this is a great thermometer at a great price!    Standard Features: All Stainless Construction Fast Response to Temperature Change Hermetically Sealed (Moisture Proof) Within 1% Full Scale Accuracy Easily Calibrated With a Flat Head Screwdriver 316 Stainless Steel Stem Material Temperature range is 20-240F/0-110C. Calibration screw is 1/16th" hex nut.

Read more less

If you're installing a stainless thermowell or Temp Twister Cooling Coil on your FermZilla, this pipe cutter will help make the process painless. This easy to use pipe cutter makes cutting copper, stainless steel, or aluminum tubing an absolute breeze. Easy to use and compact so it can get into tight corners and gives you a clean pipe cut. Simply hand tighten the pipe cutter onto the mark where you want to cut the pipe. Rotate the cutter around the pipe a couple of times to create a groove all around the pipe, and then each time you rotate the cutter, tighten the blade a little. Each rotation will cut a little deeper into the pipe and the cut will be straight. Suitable for 1/8"-3/16" pipe (3-22 mm) Cuts copper, brass, aluminum, steel, and stainless steel Heavy-duty one-piece slide Polished roller for easy rotation Hardened steel cutting blade Kegland Part Number: KL14557

Read more less

Not all bi-metal thermometers are created equally, so if you’re looking for one that you don’t have to constantly tap to get an accurate reading, this is the thermometer to choose.   Other bi-metal thermometers have a helical coil in the stem that is tack welded to the stem itself causing hang ups to occur, and you have to tap the thermometer to get an accurate reading. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings.   It's accurate to 1% of the total range, and it features a polished 2" stainless steel housing, hermetically sealed waterproof case and glass face for maximum durability. The unique anti-parallax dial also makes for easy reading.    This dial thermometer should be calibrated at 150 °F. Its temperature range is 0-220 °F (-10 to 100 degrees °C).    

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Ultimate FermZilla Combo Pack! Get the FermZilla Easy-Grip Tri-Conical & our most highly recommended accessories at an unbeatable price! Includes some of our favorite accessories for the FermZilla, such as the Pressure Kit with Floating Dip Tube so you're always racking the clearest beer, Duotight BlowTie 2 for pressure fermentations and flow control keg transfers, and Insulating Jacket to help maintain stable fermentation temps These accessories will help unlock the FermZilla's full potential, so buy them together and enjoy the savings! Combo Pack Includes: FermZilla Tri-Conical Easy-Grip Fermenter | 27L | 7.1G Pressure Kit w/ Floating Dip Tube Duotight BlowTie 2 Spunding Valve Insulating Jacket FermZilla Tri-Conical Easy-Grip Fermenter The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid and collection container, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.  What's Included: FermZilla 27L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (2) Yellow Liquid Carbonation Caps (2) Red Gas Carbonation Caps Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 27 L (7.1 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 30.2" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.   Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47296 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.

Read more less

A powerful, 304 stainless steel heating element well suited for most kettles. With its weldless design and a diameter of 1.25", it's easy to install. Simply drill a 1.25" hole in your kettle and tightening the nut from the outside. The heating element requires a power cord which can be purchased separately. Electrical connection requires a computer power connection IEC320 C13 to your 110 or 220 v plug). Available in either 1600 watt 110 volt or 2200 watt 220 volt. Features: Food grade, high temperature silicone seal The element itself is 11.5" long, 0.75" diameter Designed for use with 5 gallon batches Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use. Use the 1.25" Hole Saw to drill a hole for this product.   Kegland Part number: KL03513

Read more less

This is THE spoon for brew day!   Made of stainless steel, the homebrewer’s favorite. Nice long handle for stirring wort or mash in deep kettles & coolers. Won’t deteriorate over time like plastic. Easy to clean and sanitize.    21" in length.

Read more less

This carboy thermowell is used in conjunction with a Digital Controller to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5, 6, or 6.5 gallon glass carboys or any other similarly sized opening hole. The unit comes with a 15" stainless steel thermowell and a #6.5 stopper. The stopper has two holes measuring 3/8" and 1/4". Measures 14" from the bottom of the stopper to the end of the thermowell. Will not work with Johnson Temperature Controllers (FE600 or FE609) because the probes are too large.

Read more less

#7 stopper - solid. Top diameter 1.43 inches (36.3 mm), bottom diameter 1.19 inches (30 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. Max. Temperature Rating: 158 °F (70 °C).

Read more less

A simple, low cost pH meter eliminates the guesswork of using pH strips.  Simple 1-point calibration, accuracy to 0.1 pH units, and a pH 0-14 range make this tester incredibly easy to live with. No more guessing at your mash pH! Includes calibration screwdriver, batteries and user manual. Milwaukee Part Number: pH600AQ  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. If you're an existing FermZilla Conical or All Rounder user and you already own the Pressure Kit with 2x Ball Lock Caps and floating dip tube, check out the Hop Bong Upgrade Kit. The 3 Pieces of the Hop Bong Pressure Pack: Pressure Kit ​The Pressure Kit includes two Ball Lock Caps with the Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the FermZilla. Tri-Clamp Pressure Lid Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil. Hop Bong Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: FermZilla 2" T.C. Pressure Lid Starter Kit 2" Hop Bong 2" FermZilla Tri-Conical Butterfly Valve Floating Dip Tube Weighted Mesh Filter Attachment (KEG6571) Red PRV & PCO1881 Cap Combo Yellow Ball Lock Cap (2) Red Ball Lock Caps (2) 2" Tri-Clamps (2) 2" Silicone T.C. Gaskets KegLand Part Number: KB10897 Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

Track your fermentation progress without ever disturbing your wort! The Tilt Hydrometer and Thermometer is added directly to your fermenter to provide real-time data on the current gravity and temperature of your wort, eliminating the hassle and potential contamination that comes from opening your fermenter to pull samples. The Tilt is especially useful for brewers fermenting in glass carboys or plastic fermenters that don't have spigots for sample taking. Designed for homebrewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using their free Google Sheets template or other 3rd party cloud platforms. Tilt's goal is to help homebrewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easier to track. Here are some of the new features of the Tilt: Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters. Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: Reduced power consumption so more brews, less battery changing. New Look: Newly designed custom circuit board and harness. If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color. Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop it in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1°F (+/- 0.5°C). Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

Read more less

The Stainless Bucket Fermentor is the perfect fermentation vessel for 5 gallon batches. The small design enables it to easily fit inside a refrigerated unit. Also available in 4 gallon size for 2.5 to 3 gallon batches. Features: 304 Stainless Steel Coned Bottom Embossed Level Markings Rotating Racking Arm Includes Ball Valve, Airlock, and Stopper Liquid Crystal Thermometer Dimensions: Height - 19.5" to top of lid (Add 6.25" for airlock and stopper) Width - 16.5" handle to handle Depth - 15.25" including valve

Read more less

Accurately measure your starting and finishing gravity in beer or wine Triple scaled in specific gravity, potential alcohol, and sugar per liter Color coded scale referenced for beer and wine Comes with storage case and directions Made in France Our basic hydrometer is an essential tool for testing starting and finishing beer gravity, or sugar content, in beer or wine fermentations. Has three scales—specific gravity, potential alcohol, and sugar per liter. 9" long. Comes in storage case with complete, helpful directions. Scale Ranges: Specific Gravity: 0.980–1.150 Potential Alcohol: 0–18% Sugar Per Liter: -60–340 Converting SPL to Brix One degree Brix is equal to one gram of sugar per 100 mL of solution. Since a liter is equal to 1000 mL, you can calculate the Brix by dividing Sugar Per Liter by 10. Therefore, a must that contains 210 grams of sugar per liter is equal to 21 Brix.

Read more less

Want an easy-to-use, stainless vessel that ferments and carbonates? This 29L/7.6 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 5 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not include spunding valve shown in example photo. Please see FIL42A. Kegland Part number: KL05906

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease! These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N. In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.

Read more less