Beer Brewing Equipment & Supplies

The BrewMometer is unlike any other thermometer on the market. Not only does it read the temperature - it also has suggested "ranges" for the following: Lager Fermentation Temperature Ale Fermentation Temperature Dough-In Protein Rest Starch Conversion Steeping Mash-Out/Sparge Boil It has a 1/2" MPT thread on the back side, and a 3" face. Probe length 3 3/8". Note - This thermometer only reads Fahrenheit.

Read more less

If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671 Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 20 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 25 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 25 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Approximate Internal Dimensions: 23.5" Tall x 17.75" Ø 1.2 mm thick walls Kettle constructed from 201 stainless steel This item does not work with induction burners. A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately

Read more less

Clean up your beer and give it that sparkling clarity you see in commercial brews. Filtering removes yeast and dry-hop sediment, both of which can impart off flavors. It's also a great way to give your beer that extra edge in competition. This two-pack of filter pads are for use with our FIL45 series of plate filters. "Sterile" pads will provide between 0.3-0.5 Micron filtration. Please Note: These pads do not remove 100% of bacteria. Only an bsolute rated, 0.45 micron or less cartridge filter can remove all bacteria. All pad filters are rated as "Nominal" filters, meaning a small percentage of the pores in the filter are larger than the stated micron rating. Only certain styles of cartridge filters carry an "Absolute" rating, meaning that all the pores are the stated micron size or smaller.

Read more less

Quick Disconnects are a favorite among homebrewers for their ability to quickly move from one configuration to another. With the Brass Quick Disconnect Set you can easily connect and disconnect your water line to various equipment. These QD's must be placed in a configuration where water is always exiting the female portion of the QD and entering the male portion of the QD. For example the Female threads x Female QD portion is placed on the end of the hose while the Male QD portion is connected to your equipment. This set includes one Male GHT (Garden Hose Thread) x Male QD and one Female GHT x Female QD. We sell several adapter pieces that allow you convert GHT to male or female 1/2 inch pipe thread or 1/2 inch hose barb, making it a snap mount these QDs on just about any piece in your brewery. Please Note: This product will NOT work with our Stainless Steel or Plastic Quick Disconnects.

Read more less

If you're searching for an affordable pump to use with your temperature control system, look no further. This submersible pump can be easily integrated with an ice bank or glycol chiller. Don't be fooled by its low-profile compact design. With a flow rate of 1300 gallons per hour and a max lift height or nearly 10 feet, this pump will keep the solution moving in your chilling system with ease. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.   We recommend this pump for maintaining the temperature of any batch size fermentation between 10 gallons and 2 bbl.   Maximum flow rate: 1300 GPH Max lift height: 10 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 100W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord

Read more less

With 1/2" MPT threads, the Brewmaster dial thermometer is ready to be easily installed on most kettles, mash tuns, and hot liquor tanks. More low profile than it's bigger brother, this unit has a 2" face and 1.875" probe. Measures from 0–220°F. Made from 304 stainless steel. 2” Dial face Waterproof Range: 0-220°F 1/2" MPT

Read more less

This 30W Heating Belt will gently warm your fermenter without creating major hot spots. Heating belts are often chosen over heating pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. And they're especially useful for smaller vessels where a heating pad would be simply too large. For the best results, pair the Heating Belt with a temperature controller so that heating is only provided when your fermentation drops below your set point. If you're using a fermentation chamber or other form of chilling, the temperature controller will be able to switch between heating and cooling as needed. Comes with a standard 2-prong US style 110V plug. Please disregard the example photo that shows an AU style plug. KegLand Part Number: KL01953

Read more less

Drawing samples to monitor the progress of your fermentation is a key part of producing great beer! With this Sample Taker you can easily draw a sample from your narrow-mouth fermentation vessel.    This sampler lets you keep your beer sanitary while extracting a sample for measuring. It can broken down into three pieces for easier sanitization. 3 plastic pieces with an assembled overall length of 18".

Read more less

Want an easy-to-use, stainless vessel that ferments and carbonates? This 58L/15.3 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04572

Read more less

1/2" MNPT Plug. Made from a solid chunk of stainless that has been machined down. Nicer looking finish and hefty feel when compared to most plugs. Uses a 7/8" wrench.

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 10 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 14 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adaptor to 3/8" barb for easily attaching transfer tubing. Also included is a threaded 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 14 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters 1.2 mm thick walls Made from 201 Stainless Steel Approximate Dimensions 17.5" tall 16" wide, 1.2mm thick This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately

Read more less

No one wants a leak in his or her brew kettle, which is why the Blichmann BrewMometer Hole Plug Kit is such an essential part of your Blichmann home brewing setup. This innovative part can be used to plug the hole if you need to remove the thermometer from your brew kettle, and it is designed especially to fit inside of the hole left behind by the thermometer. The Blichmann BrewMometer Hole Plug Kit can also be used to plug the thermometer hole if you decide to brew a smaller batch in a larger kettle, making your setup incredibly versaitle for any brew size. Simply drill a new hole wherever you want to place the thermometer, then use the convenient hole plug kit to securely stop liquid and heat from escaping through the exisiting thermometer hole. Because the Blichmann BrewMometer Hole Plug Kit is also made by the popular brewing brand Blichmann, you can feel confident that it will work seamlessly with your other Blichmann products.  Size: 1/2-20x1/2 hex head cap screw  

Read more less

pH56 is a pocket pH meter with a lot of features. It has a resolution of 0.01 pH, a range of -2.00 to 16.00 pH, and an accuracy of 0.05 pH. It also reads temperature from 23.0 degrees F to 140 degrees F (-5.0-60 C), and has automatic temperature compensation. The unit is completely waterproof. The pH56 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through the operations. Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power off saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.   Milwaukee Part Number: pH56  

Read more less

MoreBeer!'s Favorite SmartRef Benefits: Only refractometer we know of that has alcohol correction built in. Gives an accurate reading during fermentation when an original reading is taken Only requires the smallest of samples Dual purpose: Can be used in the field to measure sugar content of grapes Costs less than the Anton Paar EasyDens. EasyDens gives accurate readings at any point during fermentation without the need for an original reading. Our Take: The SmartRef is a very smart digital refractometer. Unlike other refractometers on the market, it will automatically correct for alcohol during fermentation (currently only in beer) and give you an accurate reading. In order for the SmartRef to make the required adjustments for alcohol, it is required that you take an original reading before fermentation. This is a key difference from the Anton Paar EasyDens. With the EasyDens you can take a reading at any point during fermentation without the need of an original reading. Does that feature make the EasyDens worth the extra money? That is up to you of course, but sometimes in brewing we forget to take an initial reading on brew day. When used together the SmartRef and EasyDens allow for some very unique measurements like the ability to know the original gravity of a beer even without an original reading. To learn more about using these meters together, See related product. SmartRef Features: Wide measuring range from 0 to 85 °Brix (0 to 62.7 °P) Accuracy of 0.2 °Brix (0.2 °P) Built-in wort and alcohol correction for beer that is fully configurable Quick readings – results in under 2 seconds Automatic temperature compensation (ATC) Small sample volume requirement (0.4 mL) Free iOS/Android app Record and share readings from the ap Use in conjunction with the EasyDens to determine ABV, ABW, OG, FG, & Real Extract in finished beer The SmartRef Digital Refractometer by Anton Paar is a portable smart pocket device suitable for a wide range of requirements. The SmartGuide+, as a feature in the mobile app, automatically checks any errors of ambient light, impurity, and sample behavior during measurement for you. The device offers more than 15 different measurement units with automatic temperature compensation. Depending on your need, SmartRef enables you to measure the extract content of your beer, the sugar content in wine, the sweetness of fruits and vegetables, the moisture of honey, the salt content of your aquarium or pool, and much more. Smart Technology for Consistent Results The SmartRef portable refractometer is used in combination with a free mobile app for Android and iOS via Bluetooth Low Energy and enables intelligent handling of the measurement results. The app permits easy storage, visualization, management, and sharing of measurement data. SmartGuide+ detects and helps eliminate measurement problems through high ambient light detection, continuous checking of prism and sample condition, and more. In addition to the quick measurement mode, measurements in continuous mode allow a more detailed understanding of the samples’ properties. Over-the-air updates keep your digital refractometer up-to-date with the latest features. SmartRef Measurement Details The SmartRef refractometer measures the refractive index of fluids. This allows retrieval of relevant sample properties in a wide variety of applications. Fast temperature stabilization and automatic temperature compensation for measurement results make additional calculations and correction tables obsolete. The unit has an IP6 rating and an easy-to-clean stainless steel sample well. SmartRef supports a one-point zero adjustment with distilled water and requires only a few drops of sample (0.4 mL). SmartRef displays results in under two seconds and has a measurement range of 0 °Brix to 85 °Brix with an accuracy of 0.2 °Brix. High Variety of Measurement Applications Brix refractometer: For wine, juice, honey, sauces, jams, fruits, vegetables, and maple syrup. The SmartRef measures the sugar content in °Brix, °Babo, °Baumé, °KMW, and °Oechsle. Salinity refractometer: SmartRef determines the salt content in your saltwater aquarium and pool in salinity specific gravity (SG 20/20), practical salinity units (PSU), and salinity in parts per thousand (ppt). Beer refractometer: SmartRef shows the extract content of wort in °Plato. Coffee refractometer: Measure total dissolved solids to assess coffee strength and extraction quality. Instantly calculates extraction yield, letting you dial-in strength, acidity, and sweetness for any brew method. Pet Care Meister: Reads urine specific gravity (USG) to help track hydration in cats, dogs, and other large mammals. As a smart device, SmartRef offers a constant expansion of measurement units. All available scales, such as specific gravity, are provided within the app. Technical Specifications: Measuring Range Refractive index (RI) at 20°C: 1.3330 – 1.5040 Brix: 0° to 85° Sample Temperature: 10°C – 100°C (50°F – 212°F) PSU (practical salinity units): 0 – 50 Salinity ppt (parts per thousand): 0 – 150 Salinity S.G. (20/20): 1.000 – 1.114 Accuracy Refractive index (RI): ±0.0003 Brix: ±0.2° Temperature: 0.5 °C (0.9 °F) PSU (practical salinity units): ±2 Salinity ppt (parts per thousand): ±2 Salinity S.G. (20/20): ±0.002 Resolution Refractive index (RI): 0.0001 Brix: 0.1° Temperature: 0.1°C (0.1°F) PSU (practical salinity units): 1 Salinity ppt (parts per thousand): 1 Salinity S.G. (20/20): 0.001 Further Specifications Sample Volume: 0.4 mL Measurement Time: <2 s Automatic Temperature Compensation 20 °C (ATC) %Brix: 10°C – 100°C (50°F – 212°F) Automatic Temperature Compensation 20 °C (ATC) PSU, ppt, S.G. (20/20): 10°C – 40°C (50°F – 104°F) Mobile Operating System: Android and iOS Data Dimensions (L x W x H): 108mm x 64mm x 35mm (4.3" x 2.5" 1.4") Weight (incl. batteries): ~135 g (0.31 lbs) Power Supply: 2x AAA 1.5V LR03 alkaline batteries (included) or AAA NiMH rechargeable batteries Enclosure Rating: IP6 according to IEC 60529 Condition Ambient Temperature: 10°C – 40°C (50°F – 104°F) Air Humidity: 5% RH – 95% RH, non-condensing Battery Lifetime: ~10,000 measurements Storage Temperature: 10°C – 40°C (50°F – 104°F) Interface: Bluetooth™ Low Energy Frequency Band: 2400 MHz – 2480 MHz Transmitter Power: 7.5 dBm max. (5.6 mW max.) Part Material Sample Area: Stainless steel and glass, FKM O-Ring Enclosure Housing: Flame retardant PBT/PC, UL94-V0 Latest Updates to Meister Apps New batch design with a more detailed user interface Integrated beer style database Recipe creation and management Custom measurement values and labels ABV measurement for light beer, hard seltzer, and cider with the EasyDens & SmartRef Combo (in addition to existing support for standard and strong beer, wine, liqueur, and kombucha) Fermentation tracking for wine with SmartRef (previously only possible with EasyDens) Calorie determination for measurements with EasyDens, SmartRef, and the EasyDens & SmartRef Combo in Brew Meister and Wine Meister Tilt Hydrometer and RAPT Pill support in Brew Meister and Wine Meister

Read more less

Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.  

Read more less

Replacement Gaskets for your BrewBuilt Mash Tun. These are custom pieces we've designed for the BrewBuilt Mash tuns. Their only purpose? Assist you in brewing the best beer possible. Solid single piece silicone molded construction will last you for a number of brews, but whether you lose yours, or manage to break it, we have replacements. For a complete False Bottom Kit that includes the necessary Screen and Pickup Tube, see our BrewBuilt Mash Tun False Bottom Kits. Or for a complete Mash Tun, see our BrewBuilt Mash Tuns. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

20 x 20 cm custom Filter Pad for use specifically with the Buon Vino Super-Jet Filter.  Coarse pads are rated to 7 microns nominal, and are appropriate for initial clearing of red and white wines when particularly cloudy. With a nominal rated pad some material below the rating will be trapped and some material above the rating will be allowed to pass, the 7 micron represent an average. 

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Grainfather Sparge Water Heater is a temperature-controlled unit that allows you to heat up to 6.6 gallons (25 L) of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge. Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.  Actual capacity from bottom to MAX level is 6.6 gal 25 liters (+/-0.5L). 110-120V~, 60Hz, 1500W (USA) Single wall 304 ss material, brushed finish One piece structure for easy cleaning 304 stainless steel lid with twisted lock for safety Cool touch and robust lid handle and urn handles Water gauge indication and stainless steel ball valve water tap Two overheat protection Concealed heating element Control lights: heating and keep warm ON/OFF switch Maintenance base With 45-110°C variable thermostat  

Read more less

20 x 20 cm custom Filter Pad for use specifically with the Buon Vino Super-Jet Filter. Pads are rated nominally, which means that the rating is an average of all of the sizes of pores in the media. Fine pads are rated to 2 microns nominal, and are appropriate for polish filtration of red and white wines. Typically the finest filtration a red wine will go through.

Read more less

An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.  

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease! These quick disconnects feature 3/8" barbed fittings which can be used with 5/16", 3/8" or 7/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N. In short, these QDs are durable, user friendly and versatile. A no-brainer! This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.

Read more less

A food grade, 28" high temp plastic spoon perfect for stirring the mash or wort during brewing. Works best with 4 to 10 gallon size kettles. Tip: Turn the spoon upside down and use the skinny end to stir inside a carboy. Plastic spoons are preferred when using plastic fermenters or bottling buckets as they are less likely to scratch.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Catalyst represents the future of fermentation simplicity. Easy to clean, transferless, this is a time-saving piece of equipment which you'll be surprised by the value of. Boasting a rich set of features, the Catalyst Fermentation System was designed for homebrewers, while keeping true to many pro brewing principles. Not only will the Catalyst Fermentation System save you time and energy, it will improve the quality of your beer! The 45° Conical Fermentation Tank is made of a BPA free Medical Grade material, Tritan, which can withstand dishwasher cleaning and is incredibly resistant to scratches or other damage. The entire vessel is designed to withstand boiling temperatures, so wort can be transferred straight from your kettle to fermenter without cooling if necessary. Thanks to the integrated dump valve, trub can be dumped, allowing for primary and secondary fermentations to take place in the same vessel. This reduces transfers and touches, not only reducing oxygenation of your beer, but also reducing the chance of contamination. Once fermentation is complete, you can bottle from the same system using the included tubing adapter for the dump valve. Conical design forces yeast & trub down to the integrated harvester, reducing contact with your beer and improving flavor. Yeast harvesting is accomplished using the integrated oversized 3" Butterfly Dump Valve & commonly available mason jars. When fermentation is complete, cleaning is even easier. The Tritan material used for the conical resists buildup, and since the entire lid lifts off, cleaning the conical is as simple as a quick rinse & wipe down. We've found the Catalyst to be a solid piece of equipment that does the job of many pieces of brewery equipment. If you're looking for a fermenter that covers you from brew day to bottling, this is the unit for you! Features: 6.5 Gal capacity 45° Conical angle Oversized 3" buttefly dump valve Silicone Gasketed lid for perfect fermenter seal Uses common mason jars as yeast harvester All steps on the cold side of brewing in one vessel: Primary, Seconday, Yeast Harvesting, Bottling. Medical Grade BPA Free conical made of Tritan. Includes: 6.5 Gallon Tank with Lid Stand (Base, 2 Legs, 2 Support Beams, 8 Screws) 3” Proprietary Butterfly Valve Bottling Attachment Transfer Tubing Tubing Clamp Rubber Stopper 16 Oz. Wide Mouth Mason Jar Allen Wrench Perfect your Catalyst System with the Catalyst Tank Cover.

Read more less

A high quality 10" filter housing is the central part of the filtering system you are building up from scratch. Whether you're looking to filter your water ahead of brewing or your finished beer prior to bottling/kegging, this housing will be there to hold your filter media year after year. The same 10" housing found in our FIL32 kit. It has 1/2" FPT ports on both the "in" and "out" of the housing, allowing you to connect hose barbs, valves, or quick disconnects for a fully customized system. Can even be mounted on the wall with our Filter Canister Bracket! For -pre-brewing water filtration, we recommend a Carbon Block filter. For Filter Cartridges to filter beer, see our line of BevBright® Filters. Please Note: This housing is for 10" filter cartridges. Many cartridge filters are 9.785" long, and will allow some bypass if used with this housing. We recommend BevBright® filter cartridges. If you are having trouble removing the lid, try this spanner wrench! Temp range: 40 - 125° F Max pressure: 125 PSI

Read more less

For our FIL20 Buon Vino Mini Jet. Requires one 3 pack to run the filter. Course are approximately 7 microns.

Read more less

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. Great Flask for yeast culturing. Uses a #6.5 stopper (see below) In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects) Kegland Part Number: KL03957

Read more less

Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm!  Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns.  Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!!  See the Documents tab above for a more detailed guide to use. For USE ONLY ON Ss MASH TUNS (10/20 gal) 304 Stainless Steel construction Designed for gravity feed from HLT Or hook your own pump / flow control valve 3/8” diameter stainless tubing 3/8" barb on inlet of tubing Custom silicone handle mount for Ss Mash Tun Easily adjust height of sparge head up  / down Uniform liquid dispersion fom sparge head

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in early March.   Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" T.C. fittings. Primarily designed to be used with the FermZilla T.C. Pressure Lid and 2" Hop Bong for oxygen-free dry hopping. If you're planning on putting your FermZilla Tri-Conical or All Rounder in a Fermentation Chamber, you will want to allow for 420 mm (16.5") of clearance measured from the base of the ring collar to a comfortable level below the chamber ceiling so you can pull the PRV to purge oxygen from the hop bong. KegLand Part Number: KL27564

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! This Chugger pump model has 1/2" mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Inline Pump Head Food Grade up to 250° F 1/2" mpt inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!  

Read more less

The RipTide™ (Tri-Clamp model only) has been taken to the next level with a design modification to be the ultimate work horse. Now it eliminates the easy-to-loose thrust washer and showcases a PRV vent barb that will allow for mess free priming. This version will improve the overall brewing experience and operation. Again, this change is currently only on the TC RipTide™. Gone are the days of  making do with a general purpose pump such as the March 815 and all the variant imported copies.  These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright.  They also use noisy open motors that must be shielded from liquids.  All undesireable attributes for a homebrewing pump!  The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems! High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of head pressure! Carbon Fiber Dry Run Protection increases the life of your impeller and resists damage during accidental dry runs Tri-clamp head connection fully disassembles in seconds for easy cleaning 1.5" tri-clamp inlet and outlet connections Totally enclosed motor is splash proof and super quiet (50 dB) Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings. Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps! Stainless steel head rotates 360 degrees to fit in virtually any installation Large stable base with protective rubber feet keeps the pump from tipping Convenient power switch on the base Includes a 10ft long cord with plug (120V) Base acts as a cord wrap for convenient storage Assembled in USA from USA and imported components

Read more less

Plastic funnel, top measures 40 cm (15-3/4 in) wide. This mongo funnel is awesome for winemaking or brewing. Internal groove to accept filter screen (BE48). Made in Italy by Ferrari.

Read more less

Replacement Ball Valve for the Gen 3 BrewZilla / DigiBoil. Silicone washer and stainless nut included, but not pictured. Not compatible with BrewZilla Gen 4. 1/2" MPT 13.5 mm barb (apprx. 1/2") 304 stainless steel construction KegLand Part Number: KL03728

Read more less

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/8" tubing to 1/2" ID tubing. The barbs are slightly oversized at 10 mm (0.39") and 13 mm (0.51"). Made from 304 stainless steel.

Read more less

Everything you need to get right down to business with the MaltZilla Motorized Grain Mill! This complete kit includes the MaltZilla Grian Mill, Aluminum Hopper, PPE Base Board, and 110V Power Supply. KegLand put an exceptional amount of time into the research, testing, and development of the MaltZilla, and what they came up with is a motorized grain mill unlike anything we've seen before. It features an integrated motor so you'll never have to mess with a hand crank or power drill to spin the rollers. And the rollers themselves are made with a diamond-impregnated surface that offers superior performance and longevity compared to conventional knurled steel rollers. The integrated 24V motor is powerful enough to chew through popping corn kernels with ease, and works on voltages from 12-30V DC. The higher the voltage the faster the rollers spin, although we recommend 24V for optimum speed and grist results. The included power supply is straight forward, and allows you to plug the unit into a standard 110V power socket.   Knurled Steel vs. Diamond Coated Rollers Your run-of-the-mill grain mills are often manufactured with steel rollers with a knurled finish. The knurling helps grip and pull the grain through the rollers, but even the knurling on hardened steel will go blunt eventually and hinder the mill's performance. Some manufacturers attempt to solve this problem by using geared rollers to better grab the grain, or add a third roller to the mill so the first two rollers with a larger gap force the grain into the third roller. These are only workarounds to the real issue—all steel rollers will go blunt eventually, especially if used with hard grains like wheat or corn. In a commercial setting, it’s not uncommon to send the rollers off to a metalworking factory to re-sharpen and re-knurl, but this is an expensive, time-consuming hassle. Many homebrew-scale users might just end up throwing the mill away and purchasing a new one.   The MaltZilla Diamond Mill is quite a different mill design, and it’s the first in the world to use diamonds impregnated into the surface of the roller. Even after many tons of grain are processed through the mill, the diamond surface will stay just as sharp as it was on day one. The sharpness of the diamonds draws grain exceptionally well, and even when hard grains are used the diamond rollers won't dull or slip in performance.   Sheer Instead of Chop Most mills require aggressive knurling to push into the grain and “chop” the grain as it passes through a tight gap, which means your grains are often chopped in half. The MaltZilla works on a different principle and gap setting is not as critical.  The MaltZilla uses impregnated diamonds to grip the surface of the kernel and the friction of pulling the grain through the gap causes a sheering action. When set up correctly, the sheering action can leave the entire husk intact, reducing the chance of stuck sparge and improve efficiency, while still opening the husk enough that the entire contents of the kernel is available to the mashing process. The 70 mm diameter rollers are double the diameter of many other mills, which significantly improves the crush and assists in drawing the grain in more effectively.   Integrated Motor You generally would not purchase a car without an engine, so why would you purchase a grain mill without a motor? Milling grain has an optimum RPM— too slow and it will take you a long time, too fast and you will end up with excessive powder. Hand cranking can be a pain in the backside, especially with larger grain bills, and using a power drill doesn't offer much in the way of speed control and adds the potential risk of burning out your drill. The MaltZilla has an integrated motor with a very constant RPM putting out optimum RPM with an integrated gearbox. The high torque and sealed construction make it ideal for a brewing environment, as the motor is well protected from moisture and grain dust.   The motor is seamlessly integrated into the side body of the mill. Being DC, the motor is safer than higher voltage AC, especially in an environment where splashing and hose spray are commonplace. The DC motor is also reversible so the direction of spin can be changed based on the polarity. This is particularly useful for over-mount and under-mount installation.   Kit Includes: MaltZilla Grain Mill (12-30V DC) Power Supply (110V) Polypropylene base baord Aluminum hopper 6-gallon plastic bucket 17-blade gap thickness measuring tool Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

Read more less

Replacement Hardness test reagent 5 (15 ml) with a 12 month shelf life Does not include complete BrewLab test kit. See BrewLab Basic® test kit or BrewLab Plus test kit for additional information.

Read more less