Detecting your location...
Brewing Equipment Category
Homebrew Equipment

Brew Better Beer with Pro-Level Gear

Equip your home brewery without breaking the bank. From heavy-duty mashing kettles to precise transfer pumps, we have exactly what you need to craft the perfect pint.

  • Free Shipping on qualifying high-quality gear orders over $59.
  • Ready-to-Brew Kettles designed for immediate, highly effective brewing.
  • Fast & Efficient Cooling using our premium wort chillers to prep for yeast.
  • Effortless Liquid Transfers with our self-priming and magnetic drive pumps.
Step 1

Mash & Boil

Extract rich flavors and boil your wort using our heavy-duty standard or modified kettles and high-output burners.

Step 2

Chill & Transfer

Rapidly drop the temperature with a wort chiller, then use a magnetic drive pump to seamlessly move your beer into a fermenter.

Step 3

Ferment & Enjoy

Pitch your yeast, allow the fermentation magic to happen, and pour yourself a perfect, refreshing homemade pint.

Shop by collection
887 products

  • Glass Wine Thief - Economy

    Glass Wine Thief - Economy

    10 reviews

    A unique, functional variation of the traditional glass wine thief. We ordered these from eastern europe where the pricing/quality is great. The design was supposed to look exactly like our traditional thiefs we have made locally in Berkeley, California. Thus we used a picture of the original thief in our latest catalog. But alas, when they arrived they looked unlike any wine thief we have seen. But.... they work fantastic so we are happy and we think you will be too! Upon further testing and working with this thief, it has become clear that it can be tempermental about which carboys it fits in. If you'd like a glass thief for a carboy, we have to recommend the MT345. This still works great for barrels, even stacked ones! 1" in diameter, 10" from the bend to the tip and about 14" total length.

    $32.99

  • Pipette - 1mL Pipette - 1mL

    Disposable Pipette | 1 mL

    4 reviews

    Used to measure small amounts of fluid. Used in winemaking to measure the correct amount of wine for a residual sugar test using a clinitest tablet. These pipettes have a uniform pulled tip and are calibrated to deliver to the tip, with two rings near the top denoting that the small amount remaining in the tip after free delivery has ceased must be blown out and added to the main volume delivered. Capacity: 1 mL Tolerance: ±0.02 mL Subdivisions: 0.01 mL Negative Graduations: 0.2 mL   Regarding "Disposable" Pipettes Please Note: While these pipettes are designated as 'disposable' to prioritize efficiency and sterility in professional laboratory settings, their high-quality borosilicate glass construction is durable enough to withstand standard cleaning and sterilization processes. For home applications or general tasks where strict medical-grade sterility is not paramount, this allows the option of reuse rather than immediate disposal. Please be aware that reusing these pipettes is done at the user's discretion, particularly regarding the maintenance of calibration accuracy and effective decontamination.

    $5.49

  • Distillation Lid w/ Gasket for 35L BrewZilla / DigiBoil (47mm Hole) - 6 mm Gasket Distillation Lid w/ Gasket for 35L BrewZilla / DigiBoil (47mm Hole) - 6 mm Gasket

    Distillation Lid for 35L BrewZilla / DigiBoil | 6mm Gasket

    13 reviews

    Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top (DS120or DS130) to make your own easy-to-use distillery. This lid has a 1.85" (47mm) hole for the still top. Lid gasket included. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. Made from 304 stainless steel Measures 12.25" in diameter. Kegland Part number: KL03483

    $38.49

  • Stainless - 1/2 x 3/4 BSP Reducing Bush

    Stainless Bushing - 1/2 in. x 3/4 in. BSP

    1/2" female x 3/4" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06583

    $4.99

  • Kegmenter - 50 L (4 in T.C. Lid w/ Ball Lock Posts, Floating Dip Tube) Kegmenter - 50 L (4 in T.C. Lid w/ Ball Lock Posts, Floating Dip Tube)

    Kegmenter Fermentation Keg - 13.2 gal.

    2 reviews

    Want an easy-to-use, stainless vessel that ferments and carbonates? This 50L/13.2 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04565

    $329.99

  • BrewBuilt® X3 Jacketed Uni Conical Fermenter | Premium Chilling Package | IceMaster Max 2 BrewBuilt X3 Uni - Jacketed Conical - Premium Chilling Package - Max 2 - PLACEHOLDER

    BrewBuilt® X3 Jacketed Uni Conical Fermenter | Premium Chilling Package | IceMaster Max 2

    2 reviews

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is so compact that it only takes up about 12" of extra space next to your conical. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

    $2,149.99 - $2,999.99

  • O-Ring for High Temp Plastic Quick Disconnect (QD) Fittings

    O-Ring for High Temp Plastic Quick Disconnect (QD)

    1 review

    Made from EPDM material, these gaskets are to replace the stock ones that come with the CPC or LinkTech High Temp Plastic 3/8" Flow Path quick disconnect fittings (our H501 Series)

    $0.79

  • DigiBoil Complete Still Kit (35L) - Copper Pot Still Condenser - PLACEHOLDER DigiBoil Complete Still Kit (35L) - Copper Pot Still Condenser - PLACEHOLDER

    35L DigiBoil Still Kit with Copper Pot Still Condenser

    1 review

    Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 35L DigiBoil Electric Kettle and the Copper Pot Still Condenser. The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a reflux still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. Kit Includes: 35L DigiBoil Gen 2 (110V or 220V) 110V / 15A power and plug (5 ft. cord) 220V / 15A power NEMA 6-15 plug (5 ft. cord) Copper Reflux Still Condenser w/ Barb Connections 13 mm Inlet/Outlet Barbs (0.51 in.) Distillation Lid & Gasket Set of Adjustable Lid Clamps   Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).

    $389.99

  • Filter Sheets - 20 cm x 20 cm (2-3 Micron) - PLACEHOLDER

    Seitz Filter Sheets | 20 cm x 20 cm | 2-3 Micron

    3 reviews

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. 20cm x 20cm filter pads made for 20x20 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Seitz K250 20cm x 20cm 2-3 Micron  

    $68.99 - $231.99

  • Universal Stopper #11-11.5 - With Hole - Each (Large) Universal Stopper #11-11.5 - With Hole - Each (Large)

    Universal Rubber Stopper - Size #11-11.5 (With Hole)

    Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.

    $4.99

  • Blichmann ThruMometer 3/8 in. In-line Thermometer

    Blichmann ThruMometer 3/8 in. In-line Thermometer

    10 reviews

    The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it's being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58°F - 88°F, and has 3/8" in and out posts. Note- Clean with mild detergent only, using warm (no hotter than 140°F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.

    $34.99

  • Kegmenter - 4 in. T.C. Pressure Lid - 2 in. T.C. Port Kegmenter - 4 in. T.C. Pressure Lid - 2 in. T.C. Port

    Tri-Clamp Pressure Lid for Kegmenter Fermentation Keg | 4" x 2" T.C.

    Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen when used in combination with the 2" Hop Bong, 2" Butterfly Valve and additional accessories. Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience. Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity. Durable and Pressure-Resistant: Includes 4" and 2" Tri-Clamp ferrules, suitable for use up to 21 psi, with recommended PRV options for safe operation at specified pressures. Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule. See the Kegmenter Hop Bong Pressure Pack for a complete kit option. Upgrade your Kegmenter Fermentation Keg with this 4" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed to address the growing desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. The lid features closed ports that can be drilled out to install optional accessories like the Temp Twister Cooling Coil and a Thermowell. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel. Due to the large 4" Tri-Clamp diameter, it is difficult to get higher pressures without leaking, therefore we suggest using the lid up to 21 psi. If you do not already own any of the Hop Bong fittings listed below, the Kegmenter Hop Bong Pressure Pack is also available as a complete kit. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port This should only be used with a Red 35 psi PRV or the Yellow 17 psi PRV. 2" T.C. Ferrule 4" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (see below for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank. Hop Bong To use the Pressure Lid with the 2" Hop Bong, we recommend the following fittings if you do not have them already: 2 x Red Ball Lock Cap (FE13) 1 x Yellow Ball Lock Cap (FE146) 1 x 4" Tri-Clamp, 3 Segment Clamp (H734) 1 x 4" Tri-Clamp Seal (FF401) 3 x 2" Tri-Clamp (FF20) 3 x 2" Tri-Clamp Seal (FF201) 1 x 2" Butterfly Valve (FE198) 1 x 2" Hop Bong (FE202) 1 x 2" Hop Bong Cap (FE204) 1 x PCO1881 PRV Cap (KG523) 1 x Red 35 psi PRV (FE101C) Please note: The last product photo is an example image of what the lid looks like fully fitted out with the Hop Bong and other accessories that are not included with the lid.

    $16.49

  • Pump Mounting Bracket - Stainless

    Brewing Pump Mounting Bracket

    7 reviews

    Having your pump securely mounted where you want it gives you a more stable unit that is easier to control.   With this stainless mounting bracket you can mount your pump right where you want it in your brewing setup. It has two pre-drilled holes so you can attach it to a brewing stand, cart, etc. After you have secured the mounting bracket you can easily slide your pump into place and remove it when you're finished, if desired. Keep your brew system tidier during brewing by giving your pump a dedicated mount to keep it out of the way.   Fits our Chugger Pumps (H331 and H332).  

    $32.99

  • Polycarbonate Sight Glass (2 Piece Set) Polycarbonate Sight Glass (2 Piece Set)

    Polycarbonate Sight Glass - 23.5 in.

    2 reviews

    Made from polycarbonate, these simple sight gauges are easy to install and clean. It comes with a 1/2 in BSP threaded post featuring a barb with o-rings and a 23.5 in polycarbonate tube that can be cut down to size. Note: The tube may require a hose clamp to keep it fixed to the barb. Kegland Part Number: KL03742

    $14.49

  • Double Laser Infrared Thermometer Gun Double Laser Infrared Thermometer Gun

    Double Laser Infrared Thermometer Gun

    1 review

    Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.   KegLand Item Number: KL21883  

    $38.49

  • 7 gal | Brew Bucket Fermenter 2.0 7 gal | Brew Bucket Fermenter 2.0

    7 gal | Brew Bucket 2.0 | Ss Brewtech

    The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.   Brew Bucket Pure Flow Valve The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.   Sanitary Connection The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.   Conical Base The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.   Full Width Lid The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.   Features Pro-Inspired Conical base Blow off port in lid for airlocks or blow off tubing Rotatable Silicone Racking Arm Pure Flow Valve for transfers and gravity samples 304 Stainless Steel 7 gallon capacity 300m Thermowell Thermometer | LCD Temp Display Module Dual Temp Wide lid with secure spring clamps Etched volume markings gals/liters Welded carry handles Surface safe Silicone Feet Specs: Tank Size: 7 gal Batch Size: 5 gal Dimensions: 24" H x 13" W x 13" D Weight: 11 lbs  

    $249.95

  • Anvil Mash Paddle Anvil Mash Paddle

    Anvil Mash Paddle Stainless Steel - 24 in. (With Holes)

    1 review

    Heavy duty 16 gauge stainless steel commercial grade spoon is 21" long and will last an eternity. Twice the thickness of most imported spoons. The convenient hang hook lets you rest it on the kettle or just about anywhere.  

    $31.99

  • Blichmann 1/2" T.C. Gasket Blichmann 1/2" T.C. Gasket

    Blichmann 1/2 in. Tri-Clamp Gasket

    1 review

    This is a Blichmann Spare Part. 1/2" tri-clamp gasket. This is the gasket used on the Blichmann Fermenator's racking arm. Note: Each order comes with one gasket.

    $1.79

  • Stainless - 3/8 in. BSPP Male x 10 mm Hose Barb Stainless - 3/8 in. BSPP Male x 10 mm Hose Barb

    Stainless Barb - 3/8 in. Male BSPP x 3/8 in.

    1 review

    This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

    $3.29

  • Blichmann Chiller Coil - 14 - 42 gal Fermenator Blichmann Chiller Coil - 14 - 42 gal Fermenator

    Blichmann Cooling Coil for 14 to 42 gal Fermenator

    6 reviews

    Use this coil to make a cooling system for your 14 to 42 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Tall Cooling Coil fits 14 to 42 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 13.5" tall x 9" diameter

    $119.99

  • Hydrometer - Brix (9 - 21) With Correction Scale

    Brix Hydrometer (9 to 21) With Correction Scale

    1 review

    Precise hydrometer for measuring the sugar content and progress of fermentation in wine ferments. Comes with a thermometer/correction scale built-in. 15" total length. Please Note: Due to the large size of this hydrometer, it does not work with our standard 11" or 14" hydrometer jars. We recommend using our 500mL Graduated Cylinder (MT636D) with this hydrometer.

    $79.99

  • Erlenmeyer Flask - 125mL

    Erlenmeyer Flask - 125mL

    All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. Primarily used with our MT140 Economy Aeration-Oxidation System, this flask also makes a great addition to any home wine lab. Uses a #5 stopper (see below) In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects)

    $9.99

  • CoolStix 3-Hole Silicone Carboy Hood CoolStix 3-Hole Silicone Carboy Hood

    BrewBuilt® CoolStix™ Hood for Glass Carboys

    2 reviews

    Please note: This hood was designed for use with the BrewBuilt CoolStix which has been discontinued. Two of the holes are for an airlock and thermowell, but the third 1/2" hole was intended for the CoolStix and you will need to plug it or utilize it how you see fit. This silicone 3-hole carboy hood is used alongside the BrewBuilt CoolStix. The holes are for a 1/2" CoolStix, an airlock and a carboy thermowell. The holes measure 0.500", 0.413", & 0.375" Compatible with smooth neck carboys only. Does not fit Italian threaded neck carboys.

    $8.99

  • FermZilla Tri-Conical - Butterfly Valve - 3 in. x 3 in. T.C. FermZilla Tri-Conical - Butterfly Valve - 3 in. x 3 in. T.C.

    FermZilla Tri-Conical Butterfly Valve - 3 in. x 3 in. T.C.

    Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 3" T.C. fittings. This can be used on the bottom of your conical for a maximized dump valve or it can be used with a FermZilla T.C. Pressure Lid with 2" x 3" reducer and sight glass to make a massive hop injector. KegLand Part Number: KL27571

    $43.99

  • Funnel - Ferrari - 35 cm (13-3/4 in) - White Plastic

    Plastic Funnel | White | 35 cm | 13.75 in. | Ferrari

    Plastic funnel, top measures 35 cm (13-3/4 in) wide. Large funnel perfect for wine making or beer making.   Made in Italy by Ferrari.

    $23.99

  • DigiBoil 65L - 3500watt - Digital 220-240V - Gen 2 DigiBoil 65L - 3500watt - Digital 220-240V - Gen 2

    DigiBoil Electric Kettle | Gen 2 | 65L | 17.1G | 220V

    13 reviews

    Digital temperature control Triple heating element control (2000w, 1000w and 500w) 17 gallon total capacity 304 stainless steel construction 220V / 20A power This is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 10-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. More! Features: NEMA 6-30R plug (4.5 ft. cord) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both the +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130& DS120)* External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid (DS127). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). Kegland Part number: KL07313 NOTE: Due to the size of this item, it is not eligible for international shipping.

    $299.99

  • Plastic Beaker - 150ml

    Plastic Beaker - 150ml

    1 review

    A great, inexpensive beaker for lab work and taking samples with. Equipped with a pouring spout and conical shape that makes them stackable for storage. Made from polypropylene, won't crack or shatter if dropped!

    $3.99

  • AlcoEngine - Copper Reflux Still w/ Barbs AlcoEngine - Copper Reflux Still w/ Barbs

    AlcoEngine Copper Reflux Still Top w/ Barb Connections

    1 review

    The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit. If you want to make whiskeys and gins we recommend checking out the Copper Pot Still! This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet. Kegland Part number: KL16162

    $169.99

  • BrewBuilt Kettle Gen 2 with 3 x T.C. Fittings - PLACEHOLDER BrewBuilt Kettle Gen 2 with 3 x T.C. Fittings - PLACEHOLDER

    BrewBuilt® Brewing Kettle | 1.5" Tri-Clamp | Triple Port

    1 review

    Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Front and back located handles with silicone grips Induction burner compatible Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third tri-clamp port is offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are three welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.   Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.   This kettle comes without fittings so you can modify it with whatever tri-clamp accessories best suit your needs.   This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.     Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.    Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.   Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.     Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA!   Features: Three welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 Stainless construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading Silicone coated handles for heat protection 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting     SKU Size Kettle ID (in.) Height (in.) BE581 10 13.78 16.54 BE582 15 15.75 18.90 BE583 20 17.72 21.26 BE584 30 19.69 23.62 BE585 50 23.62 28.30   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

    $299.99 - $599.99

  • Low stock! LaMotte Water Test Reagent - Sodium Hydroxide Reagent with Metal Inhibitors LaMotte Water Test Reagent - Sodium Hydroxide Reagent with Metal Inhibitors

    Sodium Hydroxide Reagent with Metal Inhibitors - Lamotte Water Test Reagent (4259-E)

    Replacement Sodium Hydroxide Reagent with Metal Inhibitors (4259-E) for the Lamotte Water Test Kit (7189-01). 

    $11.30

  • KegLand - Big Jugs - Plastic Pitcher - 3.5L - 3500 mL / 125 oz Graduation Scale KegLand - Big Jugs - Plastic Pitcher - 3.5L - 3500 mL / 125 oz Graduation Scale

    KegLand Big Jugs | Graduated Measuring Pitcher | BPA Free | 3.5L / 125 oz

    Crafted from heavy-duty, impact-resistant material, Big Jugs endure drops and freezer conditions without cracking or breaking Made from BPA-free materials with clear, dual-scale markings for accurate measurements up to 125 fl oz or 3500 mL Features a wide-mouth opening for easy filling and cleaning, an integrated drip-free spout, and a comfortable ergonomic handle for versatile use Tired of flimsy measuring tools that crack and break? Big Jugs are your robust solution. Perfect for dissolving ingredients like DME or dextrose for bottle conditioning, or for safely mixing cleaning chemicals, these jugs are heavy-duty and impact-resistant, designed to endure drops and even freezer conditions without breaking. Big Jugs are made from BPA-free materials, ensuring no harmful chemicals leach into your food or boiling liquids. Achieve precise results with the clear, easy-to-read measurement markings with dual scales that measure up to 125 fl oz or 3500 mL. The smart design of Big Jugs prioritizes your convenience. A wide-mouth opening allows for effortless filling and cleaning, while the integrated spout guarantees smooth, drip-free pouring. With a generous capacity and a comfortable, ergonomic handle, these jugs are as versatile as they are durable, ready for any task in your beverage crafting process. Key Advantages: Extreme Durability: Withstands impact and harsh conditions. Food-Safe: Made with BPA-free materials. Accurate & Easy: Clear markings for precise measurements. Convenient Features: Wide opening, drip-free spout, ergonomic handle. Multi-Use Functionality: Ideal for a broad range of applications. KegLand Part Number: KL45124  

    $9.99

  • Tubing - Reinforced Vinyl (3/4 in) - PLACEHOLDER

    Vinyl Tubing (Reinforced) - 3/4 in.

    2 reviews

    Reinforced vinyl tubing is the ideal beer tubing option for transferring your homebrew that is below 158F, and is also great for water applications (such as to and from your wort chiller). This food grade 3/4 in ID Reinforced Vinyl Tubing is rated to 158 degrees F, and 150 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is essential when putting back pressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or explode if too much pressure is used.  

    $16.99 - $264.99

  • Graduated Cylinder - 10mL

    Graduated Cylinder - 10 mL

    1 review

    These 10 ml glass graduated cylinders are used to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work. Around 8" tall.

    $14.99

  • Stick-On Refrigerator Thermometer - 4 in - 40F-120F

    Stick-On Thermometer - 4 in - 40F-120F

    1 review

    The stick on thermometer is great for monitoring the temperature of refrigerators, fermentation and storage areas, and other spaces. It is relatively small (4 " tall), and includes a sticky tape back to secure to a wall or other fixture. Range is -40 - 120 degrees F (-40 to 50C).

    $4.99

  • Stainless - 1/2 in. BSP Weldless Ball Valve Assembly Stainless - 1/2 in. BSP Weldless Ball Valve Assembly

    Weldless Ball Valve Assembly (Stainless) - 1/2 in. BSP

    This is a 304 Grade Stainless Steel Ball Valve 1/2 BSP Female x 1/2 BSP External Welded Thread. Often used to convert a keg into boil kettle, also known as a keggle. Includes: 1 x 1/2" Ball Valve with 1/2" BSP male & female thread 1 x Recessed 1/2" Nut 1 x Silicone Washer (used on the inside of vessel)  

    $24.49

  • #5 Rubber Stopper - 2 holes #5 Rubber Stopper - 2 holes

    #5 Rubber Stopper - 2 holes

    Rubber stopper for use with the MT140 Economy Aeration-Oxidation System. Top Outside Diameter (OD) 27mm Bottom Outside Diameter (OD) 23mm Height 25mm  

    $5.99

  • Low stock! SS False Bottom (9 in. Diameter)

    False Bottom Stainless Steel Domed - 9 in. Diameter

    4 reviews

    The perfect size for small batches!   This false bottom fits great inside a 5 gallon beverage container, like our Rubbermaid coolers, or any container with at least a 9" opening at the top - such as a bucket. It can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

    $38.49

  • Plastic- 1/2 in. MPT x  1/4 in. Barb

    Plastic Barb - 1/4 in. x 1/2 in. MPT

    1 review

    Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).

    $1.99

  • Komos - Stainless Splicer - 8 mm (5/16 in.) x 10 mm (3/8 in.) Komos - Stainless Splicer - 8 mm (5/16 in.) x 10 mm (3/8 in.)

    KOMOS® | Stainless Splicer | 5/16" Barb x 3/8" Barb

    Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 1/4" or 5/16" ID tubing to 3/8" ID tubing. The 3/8" barb is slightly oversized at 10 mm (0.39"). Made from 304 stainless steel.

    $4.39

  • Stainless - Cross - 1/2 in fpt

    Stainless Cross - 1/2 in. FPT

    2 reviews

    Stainless Cross, all 4 openings are 1/2" Female Pipe Thread. Max pressure rating of 150 psi.

    $7.69

  • DigiBoil 35L - 2400watt - Digital 220-240V - Gen 2 DigiBoil 35L - 2400watt - Digital 220-240V - Gen 2

    DigiBoil Electric Kettle | Gen 2 | 35L | 9.25G | 220V

    21 reviews

    The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has two built-in heating elements that run off a 220V plug. One element is 1900w and the other is 500w for a combined 2400 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). If you have access to 220V power, this is definitely the unit we recommend. Although 110V power is enough to get up to boil, 220V will get you there faster and provide a much more vigorous boil. Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 220V / 15A power NEMA 6-30 plug (5 ft. cord) Dual heating element control (1900w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130& DS120)* External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the Distillation Lid. Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07252

    $199.99

  • MaltZilla - Aluminum Hopper MaltZilla - Aluminum Hopper

    Aluminum Hopper for MaltZilla Motorized Grain Mill

    Replaces the circular top inlet of the MaltZilla to allow for easier adding of grains. This product is still in development. Details will be added as they become available. Hopper only. MaltZilla and Base Board sold separately.    

    $49.49

  • RAPT - 4mm - 2M Extension Probe for RAPT Fridge RAPT - 4mm - 2M Extension Probe for RAPT Fridge

    RAPT Fermentation Chamber | 6.5 ft. Extension Probe

    If you are looking to measure the temperature of your fermentation directly from the wort, simply install this extension probe into your RAPT Fermentation Chamber. The RAPT is designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature-controlled environment which gives you the most even temperature and most precise control of your fermenter. This 2m (6.5') Extension Probe allows you to easily measure and control the temperature from right inside your fermenter, allowing for super precise readings throughout the fermentation. This is a simple plug-and-play fitting for your RAPT. For the highest accuracy, run through a 2-point calibration in the settings menu. The probe diameter is 4 mm (0.15"). KegLand Part Number: KL22460  

    $3.29

  • BrewBuilt 30 Amp Power Switch w/ Cord BrewBuilt 30 Amp Power Switch w/ Cord

    BrewBuilt® SlingBlade Watertight Power Switch

    Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   The easiest way to power the BrewBuilt™ SlingBlade! This professionally wired watertight switch gives you a simple On/Off control of your heating element. Switches both legs of a 220V 30AMP circuit and comes with 5 ft. input and output cords with molded LP6-30P ends. It also features two handy tabs for mounting to a wall. Don't wear out your expensive plugs and sockets hot patching your 220V burner elements. Plugging your element directly into a live power outlet will cause a small spark, and when done repeatedly this can damage the plug and the socket, especially with high voltage 220V appliances. Not only is the power switch more convenient to turn your element on and off during the brew day, it will eliminate the risk of damage done by hot patching.  

    $159.99

  • Funnel - Funnel Screen - Vintage Shop - For 21 cm, 25 cm, and Anti-Splash Funnels - Fine Mesh Funnel - Funnel Screen - Vintage Shop - For 21 cm, 25 cm, and Anti-Splash Funnels - Fine Mesh

    Funnel Screen | Fine Mesh | Vintage Shop

    Fine mesh filter screen for use with 21 & 25 cm or Anti-Splash funnels. BPA free. Temperature rated to 158°F (70°C).

    $4.99

  • Anvil Brewing Kettle - PLACEHOLDER Anvil Brewing Kettle - PLACEHOLDER

    Anvil Stainless Steel Brewing Kettles

    5 reviews

    Anvil Brewing Equipment brew kettles are as durable as they get, with the 5.5 gal version fitting well on a stovetop and the larger versions sitting nicely on the Anvil high performance burner. This rugged kettle is constructed from high quality materials and is designed for a lifetime of demanding use.   Standard Features Include:   -Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning. -Induction capable tri-ply clad bottom. -Internal etched level graduations in gal and liters for accurate measurements -A dual scale F/C thermometer – included standard! -Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations! -Lid conveniently rests on kettle handle -Ideal 1.2 height to diameter ratio for optimum brewing performance -Purpose built stainless steel ball valve with integral bulkhead seal is rock solid, easy to install and disassemble, and will never leak. -Dip tube drains to within 3/8” of the bottom of the kettle.   Anvil Brewing Equipment provides everything you need in a brew kettle! But if you want more, add a boil kettle strainer for the ultimate in hop and trub filtration or convert your Anvil Brew Kettle to a mash tun with our optional perforated false bottom.   SKU Size Kettle ID (in.) Height (in.) BE340 5.5 12 11.625 BE341 7.5 12.75 14 BE342 10 13.75 16.75 BE343 15 16 19 BE344 20 17.75 21.25   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

    $196.99 - $328.99

  • Funnel - Funnel Screen - Ferrari - Fits 40 cm Funnel (BE479)

    Funnel Screen | Fits 40 cm Funnels | Ferrari

    2 reviews

    Plastic funnel screen for use with 40 cm plastic funnels (BE479). Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.

    $5.99

  • Graduated Cylinder - 50mL

    50 mL Graduated Cylinder

    2 reviews

    This 50 mL glass graduated cylinder is lab grade, and allows you to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work. This cylinder is approximately 8.5" tall.

    $19.99


You have seen 432 out of 887 products

Frequently Asked Questions

Beer Brewing Equipment Collection Article +

Home Brewing Beer Making beer at home is easy, rewarding and can lead to some amazing friendships & interactions. Like most people I started brewing at home with beer brewing kit from MoreBeer! The kit came with everything I needed to brew a batch of beer at home. Typical of most homebrewing starter kits, the equipment and beer recipe ingredients where for extract brewing. I know a lot of people that just dived right into all-grain brewing and there is nothing wrong with that approach. For myself and what I recommend to others as well is starting with extract brewing. It allows you to focus on a few steps in the brewing process as you are essentially starting from the boil. I think the old saying crawl, walk, run applies beautifully to learning to brew and most anything in life. By starting with extract you can focus on, in my opinion the two most important things in brewing; cleaning / sanitation and fermentation. Not to say can’t jump into all grain brewing and give these topics the respect they deserve. It’s just a lot easier to focus on and learn a few things at a time. After all you don’t eat an entire pizza at once, you have one slice at a time. Once you have brewed a few batches of extract beer a good natural progression is to try what they call a mini-mash. This essentially allows you get some of your sugars from mashing grains but still back it up with liquid or dried malt extract. Aside from allowing you to learn the brewing process in steps, it also allows you to upgrade your brewing system over time. Purchasing a complete all grain system can be expensive and if you’re just starting a new hobby it’s nice to spend as you go. However with systems like the RoboBrew/BrewZilla, getting started with all-grain brewing has never been more affordable and accessible.  When I started brewing these type of systems were not available though. Either way, most extract brewers move to all-grain brewing; as it allows you to take complete control over your beer recipe and intern the finished beer your making. Another topic worth mentioning is the social aspect of beer & brewing. We all know beer is a social drink, heck this country “The United States” was founded in pubs by revolutionary individuals. Sure it’s fun to sit back and enjoy a pint of a beer you made. But it’s even funnier to share a pint with friends and family. That leads to another great way to learn and improve your brewing, joining a homebrew club! For the first few years of my brewing career I brewed alone and only shared by creations with family and friends. It wasn’t until I was selling some homebrew equipment on the internet that I was directed towards joining a homebrew club. The person purchasing equipment from me asked if I was aware of the local homebrew club. It really never crossed my mind to seek out or join a club, but let me tell you; it was one of the best recommendations and things I could have ever done. Not only do you meet and network with likeminded brewers like yourself; the friendships that have come from the club have not only enriched my life it has my family as well. I know being social may not be for everyone, but meeting and speaking with other brewers is a great way to get More! out of an already amazing hobby! Regardless of your brewing path, be it extract or all grain or alone or with others; always remember to keep learning and have fun brewing, cheers!

BEER Collection Article +

What is Beer? Beer is a delicious alcoholic drink that is made by yeast, fermenting a malt sugar & water mixture that is typically flavored with hops. It has been brewed since the dawn of civilization, in fact, it’s even been credited for saving the world by some scientists and historians. The earliest evidence of beer production dates back to about 3500 BC. However, there is speculation that it was being produced as far back as 10,000 BC when humans first started farming malts. The ancient Sumerian text "The Hymn to Ninkasi" is a prayer but could also be considered the earliest written beer recipe. For thousands of years fermented malt beverages were being consumed by numerous civilizations, but none of them really resembled what we know as Beer today.  It wasn’t until 1516 AD in Bavaria when the Reinheitsgebot (Beer purity law) was adopted that it started to look, smell and taste like the alcoholic drink we all know and love today. The Reinheitsgebot is actually credited as the oldest food-quality regulation in history and is still in use to this day. It states that the only allowed ingredients in Beer are water, hops and malted barley.  Today, Beer is the third most popular drink in the world with only water and tea in front of it. Cheers to a long history, a bright future and another round of our favorite drink, BEER! Types of Beer One of the reasons it's is so popular is that there is literally something for everyone. Beer styles can range from sweet to bitter or even sour and everything in between. Beer is commonly categorized into two varieties: Ales and Lagers . An Ale is produced with a top fermenting yeast called Saccharomyces cerevisiae. This strain of yeast typically clumps together and rises towards the top of the fermenter. The recommended fermentation temperature range for ale yeast is between 15–25°C (59–77°F). Ale yeast is known for its higher ester production that is commonly described as “Fruity” and comes across as apple, pear, pineapple, etc. A Lager is cool fermented and produced with a bottom fermenting yeast called Saccharomyces pastorianus. This strain is typically fermented around 7–12°C (45–54°F) and then aged at even cooler temps for several weeks or up to several months. The original German word lager means “storehouse” representing this cold storage step, but now the term is synonymous with a beer style and not the literal interpretation. Less popular than the two previous styles, but none less delicious, is the Lambic styles of Belgium , also called “Wild” or “Mixed Fermentation” in regions outside of Belgium. These styles are fermented with a Saccharomyces strain of yeast as well as Bretttanomyces and Lactobacillus bacteria. This use of bacteria gives them a sour or “funky” taste. These three high level classifications are only the tip of the iceberg when it comes to beer styles. In fact, there is an organization called the BJCP ( Beer Judge Certification Program ) that was founded in 1985 to encourage the knowledge and understanding of the world’s diverse styles. As of their last published style guidelines, there are 34 top level styles with over 100 substyles categorized. And with how popular craft beer has become lately, this list of recognized styles will only continue to grow. Making your own Beer If you found this page and read your way down to this section you obviously love and enjoy beer. In our experience one of the most enjoyable beer is the one you made yourself. Not only is it very rewarding and enjoyable it’s super easy to get started making your own beer at home . You can start with just a few pieces of brewing starter equipment and make amazing beer. Just as types can be boiled down (pun intended) to two high level classifications, so can brewing beer. These types are called Extract Brewing and All Grain Brewing . Extract brewing is what most home brewers start with due to it requiring less equipment and fewer process steps overall. With extract brewing you primarily just need a boil kettle and a fermenter . A majority of the malt sugars you will be fermenting come from an “Extract ”, LME ( Liquid Malt Extract ) or DME ( Dried Malt Extract ) hence the name. With all grain brewing you need a few more pieces of equipment as you will be creating your own malt sugars from scratch using crushed malted grains. In most traditional all grain brewing systems you have three vessels, a HLT (Hot Liquor Tank), MT (Mash Tun) , BK (Boil Kettle) and a Fermenter. There is also a hybrid approach called BIAB (Brew In A Bag) that allows you to perform an all-grain brew in a single vessel. With extract brewing, a typical brew day takes about 2-3 hours from start to finish, whereas all grain brewing typically takes about 4-6 hours. Both types of brewing can create amazing results and have different advantages to them. To learn More! about brewing in general click the Brewing button below.

Login

Forgot your password?

Don't have an account yet?
Create account