If you're a FermZilla owner, we highly recommend picking up an additional collection container or two. Use one to harvest and store your yeast, and then a second for your dry hop additions. Or harvest and store multiple yeast cultures in multiple collection containers.
The collection container features threaded ports that are compatible with the KG500 Ball Lock Cap. Attaching the ball lock cap will allow you to purge the container of oxygen before dry hopping. Or attach a small length of tubing with a diffusion stone and you'll be able to oxygenate your wort or carbonate your finished beer from the bottom up.
The container is made from Tritan and the lid from HDPE.
Kegland Part number: KL11365
This insulated tubing kit was developed specifically for the BrewBuilt Jacketed Conical. It has all the fittings needed to connect an IceMaster Glycol Chiller to the conical jacket's 1.5" tri-clamp inlet and outlet—plus premium quick disconnects with shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.
Insulated tubing will now only provide increased chilling efficiency, it will also eliminate line sweating so you don't need to wipe up puddles of condensation that might collect on your brewery's floor during fermentation or cold crashing.
Kit Includes:
1 - Insulated Tubing Set (2 x 6' lines)
2 - High Temp Plastic Female QDs w/ 3/8" Barb
2 - High Temp Plastic Male QDs w/ 1/2" MPT
2 - 1.5" Tri-Clamps
2 - 1.5" T.C. Gaskets
2 - 1.5" T.C. x 1/2" FPT Adapters
Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub
Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys
Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters
Ported lid with removable cap sized for a #5 stopper & airlock
Carrying harness included for easier handling
Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease.
Each carboy comes with a carrying harness. See below for optional stainless steel spigots.
Features:
Gasketed lid for tight seal
Included carrying harness
Ported lid ready for #5 stopper & airlock
Plastic spigot with 3/8" OD barb (tapers from 10-12mm)
20mm (0.78") diameter spigot hole
165mm (6.5") lid opening
Continuous thread, 5mm pitch
Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.
Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 2" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch.
2" tri-clamp
Approximately 6.5" long
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
5 BBL Fermenter / Unitank
Model Number: BEPS-FV-5BBL-Group
Designed for compact spaces, all valves and accessories are front-mounted for easy use and close spacing between tanks.
Key features include:
15 psi design pressure
14-gauge, fully-welded, 304 stainless steel exterior shell with #4 brush
11-gauge, 304 stainless steel interior shell
Interior finished to Ra 0.8 micron sanitary finish and passivated
60-degree cone bottom, jacketed
Independent dimpled cooling jackets (cone and cylinder) with individual glycol inlet and outlet
Rotating rack arm with butterfly valve and cover
Bottom dump 1.5″ tri-clamp fitting with butterfly valve, elbow, and cover
Aseptic-style sample valve
CIP arm with spray ball and piping
Blow-off port
Vacuum and pressure relief valve
4″-thick polyurethane insulation for cooling jacket and cone
Shadowless side manway door
10″ diameter top hatch
3″ dial thermometer
Pressure gauge
Specifications
Specification
5 BBL
Height
83.5″
Width
42″
Gross Volume
193
Net Volume
170
% Head Space
20%
Pressure Rating
15 psi
Glycol Jacket Pressure Rate
3 bar = 43.5 psi
Insulation Thickness
80mm
Manway Location
Front
Leg Support
Leveling Feet
WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known in the State of California to cause cancer and reproductive harm.
Replacement silicone feet for your Chronical Conical. A must have to keep your stainless steel fermenter level when the original feet get lost or damaged. Pack of 3.
Premium quality laser-welded 304 stainless steel closed tank
Made in Germany by Speidel and backed by a 25-year warranty
Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha.
Ultra-smooth 2R interior finish allows for easy cleaning with cold water
Outfitted with a 6-bar max cooling jacket for efficient glycol cooling
1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve
The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports
Vaulted complete drainage bottom for maximum product yield and easy cleaning
We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage.
Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.
The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.
Tank Ports
Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. The cooling jackets have two 1” NPT ports.
Speidel Quality Features
Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control.
Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs.
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms.
Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship.
Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions.
Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.
Tank Features:
Full Volume of 240 L (63.4 gal)
Perfect for blending two barrels of wine
1.5" T.C. Drain, Racking Port, and Lid outlet
8.5" Top hatch for easy cleaning and additions
2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo
2 x 1" NPT Ports on the jacket
Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)
A perfect size, food-grade, bucket that is a perfect fermenter for doing 1 gallon fermentations. Ideal for your next small batch of homebrew or fruit wine. Also a great container to store grain in. Wide opening allows for easy cleaning.
Lid sold separately.
9-1/4" H x 9-1/2" D (without lid)
9-7/16" H x 9-15/16" D (with lid)
Achieve consistent and optimal fermentation temperatures with the FermWrap Fermentation Heater. This flexible and easy-to-use unit wraps snugly around your fermenter, providing gentle and controlled heat. Use alone or simply plug into the 110V heatnig plug on most popular temp controllers
Provides gentle, even heating with 40 watts spread over almost two square feet
Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don't be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve. With 40 watts of heat spread over almost two square feet, it provides gentle, even heating. For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you'll get cooling or heating whenever you need it. Specs:
40 watts 115V 11" H x 25" W Item does not include carboy as pictured.
Kegland Part number: KL0625
Achieve perfect fermentation with a the purpose-built RAPT Fermentation Chamber
Control and monitor fermentation profiles via WiFi or Bluetooth using the RAPT IoT Hub, offering a true "set-and-forget" experience with alerts and notifications
Features 50W heating power and 300W cooling capacity, ideal for a variety of applications including brewing beer, fermenting yogurt, making wine, or even leavening bread
Functions as both a fermentation chamber and a high-capacity kegerator, capable of holding up to four 5-gallon kegs with additional space for smaller kegs
Equipped with a 2.8" color TFT screen for easy access to temperature logs, profiles, and settings, plus compatibility with thermowells for precise core temperature readings
Available with standard solid door or glass door.
Both options will include the solid door installed on the unit. You will need to install the glass door when the unit arrives.
Finally, a purpose-built fermentation chamber! Homebrewers have been repurposing refrigerators for fermentation temperature control since as far back as we can remember—and with good reason. These appliances provide excellent insulation from outside temperatures, are usually large enough to fit a typical fermenter used for 5-gallon batches, and provide incredibly even temperature distribution compared to immersed cooling coils. But to call the RAPT a refrigerator made for brewers would be doing this unit a huge disservice. KegLand has engineered a fermentation chamber that cools, heats, and automatically guides your beer through your very own programmed fermentation profiles which can be monitored and controlled remotely via WiFi or Bluetooth.
Virtually any homemade product can be greatly improved with perfect temperature control. The RAPT Fermentation Chamber gives you an electrically efficient means of setting, monitoring and controlling temperature which is perfect for beer making, wine making, salami making, leavening bread, fermenting yogurt, kombucha, kimchi, sauerkraut, making cheers, spirit washes, germinating seeds, growing sprouts, and much, much more. Accurate temp control is one of the most crucial factors to getting reliable and repeatable results.
The RAPT's control panel comes complete with an integrated color TFT screen. The 4-button color display conveniently shows a log of historic temperature graphs, allows you to start/set/stop temperature profiles, and gives you access to other critical information for that particular fermentation. An integrated secondary regulator can be used to regulate gas into the fridge with the Duotight In-Line Regulator on one side, and on the other you can install an integrated BlowTie 2 Spunding Valve to regulate residual pressure in your fermenter.
For more accurate readings of the core temperature of your fermenter, we highly recommend using a thermowell and the 6.5 ft. probe extension. If you're using a FermZilla, check out this thermowell with Duotight bulkhead.
Perfect as a Kegerator too!
This multipurpose fridge can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this fridge can warm your kegs and prevent them from freezing. This fridge also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold 4 x 5-gallon kegs on the floor and has enough headroom that you can also fit another layer of 2.5-gallon half size kegs above. To fit beer taps you can drill your own holes through the door.
What is RAPT?
RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It's a free service whereby any RAPT-enabled product can both log and store data to the hub where you can conveniently access it. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notifications in the off chance that something doesn't go to plan.
Specifications:
Integrated Heating: 50W Heating Power
Cooling Capacity: 300W Cooling Power
Max Power Consumption: 225W
Refrigerant: r600a
Connectivity: WiFi (802.11) and Bluetooth
Temperature Accuracy: +/- 0.1°C
Temp Resolution: 0.1°C
Integrated Screen: 2.8" (diagonal) 320 x 240 Color LCD TFT Active Matrix
110V
ETL Certified
External Dimensions:
Width: 21.25"
Depth: 24"
Height: 69.3"
Internal Dimensions:
Width: 17.3"
Depth: 19.6"
Height: 51.2"
Why Buy a Fridge Over a Glycol Chiller?
Although we've had great success controlling fermentation temps with an immersed cooling apparatus with a glycol chiller providing the cooling solution, these setups do present several potential issues:
Glycol chillers often require a very cold liquid to enter into a fermenter causing an excessively cold part in the fermenter core which leads to uneven temperature distribution.
Glycol chillers consume significant amounts of power and in most instances more than double what this fridge would consume.
Glycol chillers often result in spilling sticky glycol especially when hoses are connected and disconnected to the fermenter.
Glycol chillers generally require penetrations through the walls/lid of the fermenter making the fermenter less sanitary and requiring more cleaning.
Often fermenters are not made with sufficient insulation, so when using a glycol chiller much of the chilling is lost to the ambient environment. This is not only power inefficient but you can end up with a large temperature gradient. This temperature gradient can result in convection currents in the fermenter that make it difficult for yeast and other solids to settle out of suspension so clarification of the beer takes significantly longer.
Many glycol chillers and fermenter combinations do not have sufficient power or are not well enough insulated to cool to sub-freezing temperatures so cold crashing is not possible. This is a significant compromise to a temperature-controlled solution and also results in less ability to clarify the finished beer.
For these reasons KegLand has developed the world's first dedicated RAPT-enabled fermentation chamber that can cool down to -2°C (28°F) and heat up to 50°C (122°F) even in hot and cold weather.
KegLand Part Number: KL18258
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Keeping your fermentation temperatures under control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the Anvil Cooling System, you wont be disappointed! This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller. Get the best quality beer possibly by keeping fermentation temperatures under control with the Anvil Cooling System!
This system includes:
Sanitary Stainless Steel Cooling Coil.
12" Sanitary Stainless Steel Thermowell.
4 Hole #7 Stopper.
Submersible Pump - 12V DC Max Head - 16 ft.
(2) 5 ft Vinyl Cooling Hose.
Insulated Fermentor Jacket.
Anvil Temperature Controller
What makes KOMOS Kegerators better than the rest?
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model
Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard.
Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet, matte black finish faucet, or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share.
Click here to learn more about the Classic, Black, and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Air Cooled Tower
NukaTap Stainless Steel Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Tray
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap model includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Available Kegerator covers and "off road" casters for moving over uneven terrain
Detailed instructions on assembly and use
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall (fridge only)
35" with Caster wheels
48.75" with tower
51" with Casters and Tower
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
6 Gal. Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 1
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
(1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Adapt any 4" tri-clamp port to work with an existing 1.5" tri-clamp fitting or valve. Often used to connect tri-clamp accessories to the dome port on stainless steel conical fermenters.
1.5" x 4" tri-clamp
1.5" tall
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
The Vinmetrica SC-50 MLF Analyzer gives accurate and reliable malic acid concentration levels in wine for detecting the end of malolactic fermentation (MLF). The new SC-55 Does the same job, but is now sold as a standalone unit that does not require any additional equipment.
The accuracy of the SC Series devices carries over into the functionality and reliability of the MLF Analyzer. With its easy to use vial insertion assembly, the MLF Analyzer gives you fool-proof readings down to 0.1g/L accuracy. Because it does not require any fancy, expensive lab equipment and eliminates the need for paper chromatography, the SC-55 MLF gives you professional readings while saving you time and money!
Includes everything needed to measure malic acid levels in your fermenting wines:
Vinmetrica SC-55 MLF Analyzer Unit
Malic Reagent Set
One vial of Biopressure Agent (enough for 5 tests)
5 Empty Reaction Vials with Septa Caps
One plastic measuring scoop
One “check” vial
10mL serological pipette
Plastic beaker
15mL conical tube
Two plastic pipettes
MLF Analyzer Manual
The Vinmetrica SC-55 MLF Analyzer measures the pressure given off by the same MLF reaction that you use in your wine. When malic acid is present, carbon dioxide (CO2) is evolved and detected as pressure.
Why buy the Vinmetrica MLF Analyzer?
Accurately assesses end of MLF at 0.4 g/L malic acid. Capable of detecting 0.1 g/L malic acid
Affordable: About $3 per test or less.
Easy, safe to Use: No toxic chemicals or noxious odors.
Fast: results in 15 – 30 minutes. Able to run multiple tests at once
Please Note: This is now a stand alone unit, and does not require any additional equipment.
High-quality stainless steel fermentation and storage tank
Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress
Impeccable 2R (IIId) surface finish for easy cleaning
A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid
Made in Germany by Speidel
This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life.
Great for storage of wine, cider, juice, kombucha, or whatever else you may be making in 25 gallon batches!
Features:
304 SS construction
IIId surface finish - easy cleanup
95 l (25.1 gal) volume
Gasketed sealed tanks - no oxygen permeation during storage
68 cm (26.7") Height x 44 cm (17.3") Ø
German quality construction with 25 year warranty
Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
Direct replacement of the 31" floating dip tube included with the FermZilla Pressure Kits. If you're looking for a floating dip tube to use with your homebrew keg, we recommend the Torpedo Buoy™, which includes an appropriately sized metal dip tube and features a higher quality silicone tubing. Kegland Part number: KL14076
WB-06 is a highly attenuative yeast strain that provides a fruity and phenolic character that varies with fermentation conditions
Ideal for wheat base beers like Belgian Witbiers and German Weizen beers
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
Specialty yeast selected for wheat beer fermentations. Produces subtle estery and phenol flavor notes typical of wheat beers. Allows you to brew beer with a high drinkability profile and presents a very good ability to suspend during fermentation.
This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below.
Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Attenuation: 86-90%
Sedimentation Time: Slow
Alcohol Tolerance: 9-11% ABV
Optimum Fermentation Temp: 64-78°F
*See the technical data sheet below for more information on rehydration, usage and storage.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine
Partial cooling jacket provides 13 ft² (1.2m²) of coverage
Conical-shaped complete drainage bottom for maximum product yield and easy cleaning
Made from 304 stainless steel with ultra-high-quality laser welds
Made in Germany by Speidel
We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage.
Speidel Quality Features:
Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.
Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.
Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.
Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.
Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!
Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they?ll be around to honor that warranty should the need arise.
Tank Dimensions - 830mm D x 1361mm H (32.6" D x 53.5" H)
Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
Efficient Cleaning: This CIP system is designed for effective cleaning of fermenters and closed systems, equipped with a powerful stainless steel pump that ensures thorough circulation.
Precise Temperature Control: Features a temperature display and heating device for caustic, along with a temperature gauge for acid, ensuring optimal conditions for cleaning, acidification, and rinsing processes.
Compact and Movable Design: The unit is compact and easily movable with 4 caster wheels, making it flexible and convenient to use in various brewing environments.
This Speidel CIP System is designed for efficient and thorough cleaning of fermenters and closed systems like plate chillers. Equipped with a temperature display and heating device for caustic, a temperature gauge for acid, and a powerful stainless steel delivery pump, this system ensures effective cleaning, acidification, and rinsing processes. The unit is compact, movable with caster wheels, and features easy connection options.
Acid or caustic is pumped into the fermenter to be cleaned, from there it is circulated via a CIP spray ball and then pumped back into the container after use. In a closed system, e.g. plate chiller, from the storage tank in the circuit directly back into the storage tank. Backflow in each case simple via a hose through the open lid back into the respective storage tank.
Process:
Pre-rinse: Remove dirt
Cleaning: Caustics are run through the system parts
Rinsing 1: The cleaning medium is flushed out with water
Acidification: Deposits and scale are removed with the help of acid solutions
*Only necessary at certain intervals, not after each fermentation or brewing process
Rinsing 2: The acid is flushed out with water
Product Details:
7.9G (30L) conical tank with temperature display for caustic with heating device
7.9G (30L) conical tank with temperature gauge for acid
Connections DIN NW 25 for hose 1" plus connection option water Gardena
Delivery pump made of stainless steel 880W / 4.5bar / 1,188 gal/h / 4,500 L/h
Heater in the suds tank - adjustable temperature
E-junction box with on/off for pump and heating
Connection voltage: 110V
Connection cable 9.8' / 3m
Movable with 4 caster wheels
Compact and flexible in use
Dimensions:
Height: 43.3" (110cm)
Width: 22.4" (57cm)
Length: 47.2" (120cm)
Weight: 132 lbs (60kg)
Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the unit with the appropriate plug.
Please Note: This unit is not specifically designed for certain mains voltage. It is compatible with both 110V and 230V and 50 or 60 Hz. However, the plaque on the unit may display 230V.
The BrewBuilt tri-clamp thermometer features a large 3" face for easy reads and 2" probe is less obtrusive in your conical fermenter or T.C. kettle. Dial face reads from 0-220°F and -10-100°C.
3" dial face
2" probe
1.5" T.C.
Reads in °F and °C
The Ultimate Grain to Glass Combo Pack! Get the Gen 4 BrewZilla & FermZilla Easy-Grip Tri-Conical with all the best accessories at an unbeatable price!
Brew extract or all grain batches on the BrewZilla; ferment, carbonate, and serve from the FermZilla. Everything you need from Grain to Glass!
Comes with all of the most highly recommended accessories for the BrewZilla, including the Neoprene Jacket to speed up heating times, Hop Spider to keep vegetal matter out of your wort, and Chilling Connection kit so you're ready to use the Immersion Chiller out of the box
Includes some of our favorite accessories for the FermZilla, such as the Pressure Kit with Floating Dip Tube so you're always racking the clearest beer and the Duotight BlowTie 2 for pressure fermentations and flow control keg transfers
Over $100 savings when purchasing this kit bundle compared to buying everything piece-by-piece!
Also available in 110V (AG580)
You can search high and low, but you won't find a better deal than the BrewZilla Ultimate Grain to Glass Combo Pack!
Combo Pack Includes:
BrewZilla Brewing System | Gen 4.1 | 9.25G | 220V
Neoprene Jacket
Hop Spider
Wort Chiller Connection Kit
FermZilla Tri-Conical Fermenter | Gen 3.2 | 7.1G
Plastic Pressure Kit w/ Floating Dip Tube
Duotight BlowTie 2 Spunding Valve
Insulating Jacket
Gen 4 BrewZilla All-in-One Brewing System
WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal
The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench
Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter
Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation
Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency
Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp
The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve
Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps
More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet
WiFi/Bluetooth Enabled RAPT Controller
The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen.
But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability.
And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer!
But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings.
Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road.
High Capacity Malt Pipe
With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency.
Concave Base with Center Draining
Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind.
Ultra Low Watt Density Elements
The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy.
Easy Access Built-In Pump
The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet.
If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer.
MoreBeer!'s Final Word
We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included.
Perfect for Distillation
If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find.
Features:
Gen 4.1
Stainless steel construction
9 gallon total capacity with a finished beer output of 5-6 gallons
WiFi/Bluetooth Enabled RAPT digital temperature controller
Automatic step mashing with 6 programmable stages
220-240V power
NEMA 6-30P plug
Requires NEMA 6-30R receptacle
Requires 11 amps from 30 amp circuit
Dual heating elements (1900 watts and 500 watts)
Stainless steel 1/2" ball valve for gravity draining or transferring via pump
Immersion wort chiller included
Stainless steel malt pipe/basket
Stamped in volume markers
Glass lid
Adjustable lid clamps (do not use with glass lid in place - see below)
Magnetic drive pump for recirculation, transfers, and cleaning
Recirculation arm
PPSU sight glass
Bottom handle for easy lifting and pouring
Rubber feet
Temperature reads in °F or °C
Approximately 32.75" H (with recirculation arm) x 12.5" D
Recommended max. grain bill: 23.5 lbs
AlcoEngine Still ready with the purchase of a Distillation Lid
Pump Specs:
Max Capacity: 2.9–3.1 gal/min
Max Head: 4.9–6.8 ft.
Poles: 2
Voltage: 220–240V-AC
Frequency: 50–60Hz
Power: 6 watts
Current: 60 mA
Speed: 2600–3000rpm
Duty Cycle: Continuous
Capacitor: 2µF
Input/Output: 13mm barb
Water Resistance: IPX2
Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe.
Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged.
Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.
35L (110V)
35L (220V)
65L (220V)
100L (220V)
10 ft.
14 Gauge
14 Gauge
12 Gauge
10 Gauge
25 ft.
14 Gauge
14 Gauge
12 Gauge
10 Gauge
50 ft.
12 Gauge
12 Gauge
10 Gauge
8 Gauge
FermZilla Tri-Conical Easy-Grip Fermenter
A best seller for a reason! Tons of features at an incredible cost
Crystal Clear super smooth PET makes fermenting and cleaning super easy
3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar.
Pressurizable for fermentation and closed transfer to your keg
Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.
The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid and collection container, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.
What's Included:
FermZilla 27L Tank with 3" T.C. Bottom Port
Easy-Grip Threaded Lid Ring
Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi)
Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float
(2) Yellow Liquid Carbonation Caps
(2) Red Gas Carbonation Caps
Fermzilla Pressure Lid with Red PRV (35 psi)
3" T.C. Butterfly Valve
600 mL Collection Container with 3" T.C. Connection
Stainless Steel Stand with Swing Handles
3" tri-clamp with gasket
Graduation Sticker
Adhesive Thermometer
Specs:
27 L (7.1 gal) Total Volume
Pressure Rated to 2.4 Bar (34.8 psi)
Height in Stand - 30.2"
Tank Diameter - 13.9"
Diameter in Stand - 15.3"
Lid & Collection Container Ports - 28 mm PCO 1881 threads
Temperature Rating:
When not under pressure, do not expose to liquids above 131°F
When under pressure, do not expose to any temperatures above 95°F*
*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.
Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.
Pressure Stress
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:
Fill the tank to the brim with water
Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
Pressurize the tank to 4 BAR (58 psi)
Check for leaks, then replace the Red PRV when finished
If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.
General Care
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.
KegLand Part number: KL47296
NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
FermZilla Tri-Conical 27L & 55L | User Guide
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
S-33 is an ideal strain for enhancing the hoppy and fruity expressions of your beer
Fruit-forward character and imparts a high mouthfeel and body to the beer
Especially recommended for Belgian Ales, strong English ales, and New England IPAs and Hazys
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
If you’re going for a custom-made Belgian style beer you’ll want to keep some of this dry yeast on hand.
Safale S-33 is a great yeast strain for Belgian style beers, such as Belgian wheats and Trappist-style Ales. Provides the characteristic phenolics of beers in Belgium.
This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below.
Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Attenuation: 68-72%
Sedimentation Time: Medium
Alcohol Tolerance: 9-11% ABV
Optimum Fermentation Temp: 64-78°F
*See the technical data sheet below for more information on rehydration, usage and storage.
2 BBL Fermenter / Unitank
Model Number: BEPS-FV-2BBL-Group
Designed for compact spaces, all valves and accessories are front-mounted for easy use and close spacing between tanks.
Key features include:
15 psi design pressure
14-gauge, fully-welded, 304 stainless steel exterior shell with #4 brush
11-gauge, 304 stainless steel interior shell
Interior finished to Ra 0.8 micron sanitary finish and passivated
60-degree cone bottom
Rotating rack arm with butterfly valve and cover
Bottom dump fitting with butterfly valve, elbow, and cover
Sample valve
CIP arm with spray ball and piping
Blow-off port
Vacuum and pressure relief valve
2.36″-thick polyurethane insulation for cooling jacket and cone
Top manway door
3″ dial thermometer
Pressure gauge
Specifications
Specification
2 BBL
Height
71.75″
Width
31.5″
Empty Weight
352 lbs
Gross Volume
79
Net Volume
69
% Head Space
20%
Pressure Rating
15 psi
Glycol Jacket Pressure Rate
3 bar = 43.5 psi
Insulation Thickness
60mm
Manway Location
Top
Leg Support
Leveling Feet
WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known in the State of California to cause cancer and reproductive harm.
Using the WineEasy™ combined fermentor and press is admittedly different than anything on the market, but is incredibly easy to use and provides results and ease of use that traditional fermenting and pressing techniques simply can't offer.
At the heart of the system is a high quality stainless primary fermentor (20, 30 and 55 gal sizes). A uniquely designed false bottom located at the bottom of the fermentor allows the pomace to be separated from the wine while draining the unit. The tines on the pressure plate support the bottom of the fermentor and perforated false bottom and keep it from collapsing from the pressure imparted by the vacuum pump
After alcoholic fermentation, the free run is drained or pumped out of the fermentor. The sliding piston assembly is then installed. The vacuum pump evacuates the carboy (or other vacuum capable vessel) and applies a vacuum under the false bottom of the WineEasy fermentor. This causes atmospheric pressure to push down on the sliding piston pressing the pomace to the ideal maximum pressure of 14 PSI to avoid hard press conditions.
Since this is all done without transferring the pomace to a press, and is done so in a completely closed and air tight system, oxidation and contamination are virtually eliminated.
Cleanup is as easy as scooping out the dry pomace into a container and washing out the high polish stainless steel fermentor!
Features:
No messy transfers to a secondary fermentor
Less risk of contamination and oxidation
Great press efficiency
Fast
Easy to use
Simple mess-free cleanup
Produce consistently superb wines
Please Note: This 30 gallon Wine Easy requires at least 6.6 gallons of must to press effectively.
What makes KOMOS Double-Wide Kegerator better than the rest?
Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model
Faucets mount to high-quality stainless steel towers, rather than cheap chrome plated towers
Interior fan diverts cold air up into the towers to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers.
The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the two tap or eight tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard.
Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share.
Click here to learn more about the Classic, Black, and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Feature Summary:
Stainless Steel Air Cooled Towers
NukaTap Stainless Steel Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Trays
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap towers includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2-tap tower and higher only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Detailed instructions on assembly and use
Specifications:
35.4" wide
27.8" deep
34.3" with CO2 mount
33" Tall (fridge only)
35.5" with Caster wheels
49.25" with tower
51.5" with Casters and Tower
110V - 50 hz
0.9 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
31.6" wide
20.4" deep
17.1" on the left side where the compressor sits
28.3" tall
What Fits:
5 Gal. Torpedo Keg - 6
5 Gal. Slimline Torpedo Keg - 8
6 Gal. Torpedo Keg - 6
5 Gal. Megamouth Torpedo Keg - 3
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8
5.2 Gal. Oxebar PET Keg - 6
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3
15.5 Gal. Half Barrel Keg (Full Size Keg) - 2
See below for the Kegerator Instruction Manual.
When choosing the number of taps you want, here is the tower configurations you'll receive.
Taps
Tower 1
Tower 2
2-Tap
Single
Single
3-Tap
Single
Double
4-Tap
Double
Double
5-Tap
Double
Triple
6-Tap
Triple
Triple
7-Tap
Triple
Quad
8-Tap
Quad
Quad
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Replacement tank manway locking handle for 3.5 bbl MB Conical Unitank Fermenter.
Please Note: This replacement part is intended for unitanks produced after 2021. The diameter of the threads are M18.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid December.
1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks.
Specifications:
0.4 micron
Overall Length: 10.5"
Stone Length: 5"
Stainless steel stone
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions: 440mm D x 765mm H (17.3" D x 30.1" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.