Search results for "brewtools brewing system"

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! Smooth malt character, a light hopping, and low alcohol make this a very sessionable Brown Ale Includes 100% Northern Brewer hops Estimated ABV: 4.5% Estimated IBUs: 26-30 Makes 5 gallons of finished beer The Brewing Network has become THE number one source for brewing information on the web. The Brewing Network's flagship show, The Sunday Session, was the first live show about homwebrewing and craftbrewing on the internet. Chad Moshier, the stations producer, created this brown ale as an easy-drinking session beer, and became a cult favorite on the show. Chad relocated to California from Connecticut, and hooked up with Justin, the founder of The Brewing Network.  Makes 5 gallons Estimated Original Gravity: 1.045-50 SRM (Color Range): 29 IBUs: 26-30 Estimated Alcohol Percentage: 4.5%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.     Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

Insulation Jacket for MiniUni™ "plus" model fermenter. Reduces condensation on the tank during big differences in temperature Made from 5mm neoprene.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

LP12 to DIN adapter (DIN43650 Form A). Used to connect solenoid valves to the Brewtools FCS I/O Module using a LP12 2-pin cable.

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is so compact that it only takes up about 12" of extra space next to your conical. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. Includes all the equipment required to whip up Flash Brewing® Beer Making Kits plus the first recipe kit of your choice! Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. Malt extract, hops, and yeast are included with each recipe. Simply mix with water in the fermenter and you'll be days away from delicious home brew! Makes 5 gallons of finished beer Flash Brewing® Kits Introducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing at MoreBeer! or have more questions please read our Frequently Asked Questions. The Flash Brewing® Equipment Kit was made for beginner brewers who might not already own some of the essential equipment needed to brew Flash Brewing® recipe kits. Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter. The 7-gallon Fermonster fermenter is a perfect choice as the wide mouth allows you to easily pour in the ingredients. Kit Includes: 7-Gallon Fermonster Fermenter & Spigot Airlock & Stopper Bottle Filler & Tubing Fermenter Lid Opener Star San Sanitizer Instructions Your Choice of Recipe: Citra® Session Pale Ale A sessionable beer with a light color and low ABV. Citrus and tropical fruity hop character on full display. 4.9% ABV | 30 IBUs Blonde Ale An easy drinking ale, low in esters, and balanced with enough hop character to accentuate the malt profile. 4.9% ABV | 15 IBUs Cali Mountain Pale Ale Inspired by one of the most iconic pale ales in the country: Sierra Nevada's Pale Ale. A simple recipe that creates a complex yet crushable brew. 5.6% ABV | 30 IBUs Best Buds Pale Ale Mosaic ® and Citra ® combine their complementary hop flavor profiles for a crowd-pleasing, smooth pale ale. 5.8% ABV | 30 IBUs Pilsner An homage to the classic Pilsner style, with a white, frothy head that laces beautifully on the glass. 5.8% ABV | 30 IBUs Flash Brewing recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets.   Citra®, Mosaic® and Cryo Hops® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

A best seller for a reason! Tons of features at an incredible cost Crystal Clear super smooth PET makes fermenting and cleaning super easy 3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar. Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.  What's Included: FermZilla 27L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (1) Yellow Liquid Carbonation Cap (1) Red Gas Carbonation Cap Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 27 L (7.1 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 30.2" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.   Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47296 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla Tri-Conical 27L & 55L | User Guide

Read more less

Solenoid valve made from stainless steel. Designed for glycol, water and air/co2. TC3mm ports in both ends for maximum flexibility. Coil and plunger Italian-made by ACL. The valve can easily ble disassembled and cleaned. Coil has DIN 43650 Type A connector (not included). Specifications: Ports: TC 1.5" / TC 1.5" Operation: NC (normally closed) Power supply: DC24V, 10W Orifice: Ø4.5mm Pressure rating: Max 3 bar / 43 PSI

Read more less

The Flash Brewing® Equipment Kit was made for beginner brewers who might not already own some of the essential equipment needed to brew Flash Brewing® recipe kits. Flash Brews can be fermented in any wide mouth 3-gallon fermenter. The 3-gallon Fermonster fermenter is a perfect choice as the wide mouth allows you to easily pour in the ingredients. Includes: 3 gal Fermonster Fermenter & Spigot Airlock & Stopper Bottle Filler & Tubing Fermenter Lid Opener Star San Sanitzier Instructions

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

The Ultimate FermZilla Combo Pack! Get the FermZilla Easy-Grip Tri-Conical & our most highly recommended accessories at an unbeatable price! Includes some of our favorite accessories for the FermZilla, such as the Pressure Kit with Floating Dip Tube so you're always racking the clearest beer, Duotight BlowTie 2 for pressure fermentations and flow control keg transfers, and Insulating Jacket to help maintain stable fermentation temps These accessories will help unlock the FermZilla's full potential, so buy them together and enjoy the savings! Combo Pack Includes: FermZilla Tri-Conical Easy-Grip Fermenter | 27L | 7.1G Pressure Kit w/ Floating Dip Tube Duotight BlowTie 2 Spunding Valve Insulating Jacket FermZilla Tri-Conical Easy-Grip Fermenter The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid and collection container, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.  What's Included: FermZilla 27L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (2) Yellow Liquid Carbonation Caps (2) Red Gas Carbonation Caps Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 27 L (7.1 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 30.2" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.   Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47296 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.   FermZilla Tri-Conical 27L & 55L | User Guide

Read more less

EVA-tube is perfect for glycol and other uses where the tube can't bend too much to prevent flow This insulated model is perfect for reducing condensation The tube fits 3/8" (10 mm) hose barb fittings For more information on building a cooling system for your Brewtools fermenter, click here.

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   No Need to Upgrade Later, The X3 Comes Fully Loaded: Built-in external cooling jacket with 1.5" TC Ports Neoprene jacket for insulation Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs. The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible. Highest quality mirror polish finish inside and out Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation New Features: Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more 3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy! #BrewBuilt External Cooling Jacket When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation. 8” Tri-Clamp Top Port New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure. Extra Large 3” T.C. Dump Valve The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester. Reinforced Four-Leg Foundation There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery. The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare. Adjustable Feet The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time. Flex Chamber Collection Jar - Trub Separator & Yeast Harvester Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation. Pressure Pack with Clear Float Technology Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened. Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind. Other Features You’ll Love: Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off Stainless steel lid clamp with single-piece molded silicone gasket In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons X3 Accessories: BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation) The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual. Hop Bong Oxygen-Free Dry Hopping Device The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. High Roller Caster Set Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters. IceMaster Max 2 Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected. Immersion Heater The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Full List of X3 Conical Features: External Cooling Jacket with 1.5" Tri-Clamp connections Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down. Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories Neoprene insulation sleeve Wide base with 4 legs for stability 304 stainless steel construction Mirror polish finish Interior welds are the best in the business - uniquely ground and polished (1) 2“ TC port for direct immersion heaters (3) Horizontal welded cone ports (1) 8" Lid Cap Opening with 8” TC Clamp (5) 1.5" TC Lid Openings 3" TC bottom dump with 3" TC butterfly valve 1.5" Thermowell for inserting thermal probe (4) Adjustable feet Silicone tube for blow off Stainless 8” Three Piece Tri Clamp & one piece molded gasket Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations) For volume and dimensional specs, Download the PDF. Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.

Read more less

The BrewLab Plus® water test kit, model 7188-02, for home brewers quantifies 8 important water test factors. Includes everything in BrewLab Basic kit plus a high quality digital pH meter for monitoring batches from start to finish. Experts agree water conditions affect your final product, so take the mystery out of making great beer. Trust LaMotte, the water analysis experts since 1919, to help you control your most important ingredient—water! Visit HomeBrewFinds.com for a hands-on review of the LaMotte BrewLab water test kit. For more information on water and its role in the brewing process, check out Water, A Comprehensive Guide for Brewers written by John Palmer and MoreBeer!'s own Colin Kaminski. For help with water adjustments, download Palmer's Brewing Water Adjustment App, currently available for iOS devices and coming soon to Android. See the Documents Tab above for additional information.

Read more less

Power supply with DIN 43650-connector for solenoid valves. Made for use with solenoid valves directly from an AC outlet in an Inkbird or equivalent systems. Adapters for global use included. Specifications: Input: 100-240V AC, 50/60 hz Output: 24V DC, 1.66A (39.84W) Cord Length: 3m (9.8')  

Read more less

A stable mash temp is one of the most important elements of the brewing process. The Ss Brewtech InfuSsion Mash Tun is the perfect choice for brewer’s looking to upgrade their aging plastic cooler. It’s built to last, made exclusively of 304 stainless steel and designed for those who want professional grade equipment and features for their home brewery. The double walled construction with injected high density foam insulation is incredible at mitigating temp loss and holding temperatures stable throughout the duration of a typical mash rest. The venerable InfuSsion Mash Tun has been updated with TC ports throughout for easy integration with the rest of the Ss Brewtech line up. Additionally, the InfuSsion Mash Tun is the first Ss product to be released with the Patent Pending Pure Flow Valve platform. Fully sanitary, easy to clean, and micro adjustable Pure Flow valves are designed as the ultimate brewing valve. Pro-Inspired Pro features like a 5° sloped floor with center drain, zero deadspace design, etched volume markings, integrated thermowell, thermometer, and the ability to incorporate mash recirculation result in the most thoroughly engineered and efficient mash tun available to homebrewers.  Upgradable The InfuSsion Mash Tun is now equipped with a 3/4" TC recirculation bulkhead which allows quick installation of optional accessories such as the vorlauf attachment or a recirculation manifold. Pure Flow Valve With a clean slate, the Ss Engineering Team took a stab at creating the perfect sanitary valve for brewing. The foundation of the Micro Adjust Valve is a removable silicone membrane that seamlessly integrates TC gasket geometry. This ingenious design provides a 100% sanitary environment where beer makes contact with nothing except pure silicone while inside the valve. Features: 304 Stainless steel construction 1” thick insulated side walls and lid Sanitary TC ports 5° sloped floor with center drain eliminates dead space Gasket sealed stainless steel false bottom 1.5" TC Pure Flow Valve 3/4" TC recirculation bulkhead Redesigned feet with locking screw  Redesigned LCD thermometer Etched volume markings gals/liters What's Included: InfuSsion Mash Tun LCD thermometer (°F/°C) Silicone thermometer boot (2) 1.5" TC clamps (2) 1.5" TC gaskets Pure Flow Valve 1.5" TC Thermowell Silicone plug for recirculation hole 3/4" TC recirculation bulkhead Perforated false bottom Silicone false bottom gasket   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The Ss Grain Mill sports an all-in-one design, featuring a hi-torque DC motor combined with a leveraged gear reduction system that drives a series of billet aluminum pulleys and high inertia rollers that make easy work of the toughest wheat and rye malts — Capable of up to 350 lb/h  Differential Speed Rollers Dating back to the early days of craft brewing, feed mills were often repurposed in breweries due to the lack of availability of milling equipment designed specifically for processing malt in brewing applications.  Conversely, in a home brew settling, corona mills, and other repurposed mill designs intentioned for processing raw grain in a home kitchen were adopted for their ease and accessibility.   Naturally, if you're feeding livestock or making grits, you typically want to pulverize the grain.  However, if you're brewing beer it’s preferable to crack the endosperm in several places and then sheer off the husk, keeping it mostly intact.  This shearing and crushing action maximizes both efficiency and lautering performance, reducing or eliminating the need for rice hulls or other lautering aids. The two rollers inside the Ss Grain Mill are both driven by the onboard motor, but designed to rotate at different speeds. This key feature is at the heart of our purpose built mill designed for home and pro brewing.   Machined Fluted Stainless Steel Rollers Other mills that are designed to pulverize grain, often rely on hardened steel knurled rollers to extend their usable life.  The shearing action of the Ss Grain Mill places less stress on the roller to effectively process the grain. We settled on the more professional approach of fluting the rollers, which enhances the ability for the two rollers to engage the malt and effectively shear the husk from the endosperm.  It was also important to us that this mill be functional in either a home or pro-environment, so we decided to cast the rollers in solid 304 stainless steel, with each roller weighing a robust 7.5 lbs.   Furthermore, the profile of the rollers has been completely rethought.  Most small mills rely on a wide processing envelope and a small, 1.5-2” diameter roller.  We have emulated the design of large production mills, and increased the diameter of the roller to 4”, and narrowed the processing envelope.  This design increases the rotating mass, and stores rotational energy, which ultimately helps to smooth abrupt changes in rotational speed.  Furthermore, the entrance angle is less aggressive with a larger roller, resulting in additional mechanical advantage.   Precision Gap Adjustment Eleven points of adjustment ranging from 0.5mm to 2.0mm open up a wide range of malt products. Gap adjustments are tool-less and can be made without any disassembly, or complicated procedures.   Extruded Aluminum Chassis The two piece extruded 6061 aluminum chassis promotes structural rigidity resulting in a more precise degree of roller alignment.  This is important to retaining consistent roller gap settings from batch-to-batch. Furthermore, the two-piece construction isolates the motor and rollers in separate chambers, preventing the motor and drivetrain from accumulating dust and debris. All rotational pulleys, and rollers have their own dedicated fully sealed ball bearings for low drag and long life.   25 lb. Hopper Capacity  The Ss Mill will include a custom tooled 4mm thick ABS hopper that is both structurally strong and lightweight. Designed to hold up to 25 lbs. of grain at a time, the Ss Grain Mill has been clocked in prototype testing at processing roughly 350 lbs. per hour of barley malt.  Which is roughly a 50 lb. sack every 8 mins, making it perfect for batch sizes from 5 gallons to 5 BBLs.   Features: All-In-One Design Differential Speed Rollers Machined Fluted Stainless Steel Rollers Precision Gap Adjustment Extruded Aluminum Chassis Specs: 350 lb/h 25 lb Hopper 0.5 - 2.0mm Gap Range 18" Width x 19.5" Height x 9" Depth Plugs into standard 110 volt wall socket. Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.  

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. Irish Red Ale is decidedly malt-forward with a distinct caramel flavor Flavored with Willamette pellet hops Estimated ABV: 5.8% Estimated IBUs: 30 Makes 2 gallons of finished beer Irish Red Flash Brewing® KitOne of our best-selling kits of all time, Irish Red Ale is decidedly malt-forward with a distinctive caramel flavor. Our most complex malt recipe, with a perfect blend of golden, amber, and dark malt extracts, obtains a robust malt flavor and deep amber-red color. The perfect winter beer, but can be enjoyed year-round. Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 3-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 3-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Irish Red Ale Flash Malt™: 2.4 lbs Willamette Hops: 0.5 oz HopBite™: 30 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets.  

Read more less

A traditional English style beer featuring chocolate and caramel malts for a delicious, biscuit-y character. Balanced by just the right amount of Northern Brewer Hops. Color/Body: Brown/Full Bitterness: Medium Estimated Alcohol: 5%  

Read more less

The DigiBoil electric kettle can serve a surprisingly wide range of functions. It's perfect for 10-gallon extract batches, preheating strike or sparge water, and with the addition of a still top lid and condenser, it can be used for home distilling. With the Mash Upgrade Kit, you can easily use the DigiBoil as an electric mash tun.This model runs off 220V power and has three heating elements (2000w, 1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2").Features: 304 stainless steel construction 17 gallon total capacity Digital temperature control 220V / 20A power NEMA 6-30P plug (4.5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °CWith elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed *Distilling: using the DigiBoil with a distilling condenser requires the still top lid (DS127).Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).Kegland Part number: KL07313NOTE: Due to the size of this item, it is not eligible for international shipping.

Read more less

Panel mounted fitting from TC34mm to 12mm barb with M28 threads and nut. Used with MiniChilly 17 for glycol loops.

Read more less

Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Power cable for the B25 Brewing System (230V). Connector A: NEMA 6-15P Connector B: LP20, 3-pin female plug Color: Black Length: 2m (6.5 ft.)

Read more less

This 1 Gallon Starter Kit is the the easiest way to get started homebrewing! Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours! Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you! If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for. Equipment Kit Contents Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar Fermenter Jar Lid w/ 3-Piece Airlock Mini Auto-Siphon makes transfers a breeze Food-Grade Transfer Tubing Premium Bottle Filling Wand Bottle Capper Sanitizer Concentrate Irish Red Ale Recipe Kit (see below for more info) Irish Red Ale Medium bodied, beautiful red color, and toasty, graham cracker malt character. Where Helen’s was the face that launched 1,000 ships, this is the beer that’s launched thousands of homebrewing careers. One of our all time best-selling recipes--one sip and you’ll understand why! Color/Body: Red/Medium Bitterness: Medium Estimated Alcohol: 4.5% Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including: Specialty Steeping Grains Fermentable Malt Extract Brewer’s Hops Brewer’s Yeast Disposable Grain Bag (for recipes w/ steeping grains only) Carbonation Drops Bottle Caps *Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.

Read more less

Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.

Read more less

Stainless steel ball valve with 12mm barbs.

Read more less

No more boil overs, no more blow-off tubes. Once you’ve used Foam Control you’ll never brew without it again! Foam control does just what its name suggests--it reduces foam production during the hot-break portion of the boil, and it reduces the amount of krausen developed during fermentation. Also known as FermCap S, Foam Control does not affect the head on your finished beer. In fact, it can actually increase the head by retaining head-forming compounds that would have been blown off during fermentation. It will settle-out of your beer before bottling or kegging as it is actually absorbed onto the surface of the yeast cells and filter media. Add two drops per gallon at start of fermentation. Comes in an eye dropper bottle for easy use. 1 oz is good for about 50 x 5-gallon batches of beer. Also available in bulk 1 gallon size. Note: Keeps best when stored in the refrigerator. Like Foam Control (FermCap S)? Then you will love CellarScience® Foam Axe - Anti Foaming Agent!

Read more less

Built-in external cooling jacket with 1.5" TC Ports Pressure Pack lid with floating dip tube and draft style QD connections for sampling/serving Tri-clamp thermowell, sealed pressure gauge, and pressure relief valve included Full draining dish bottom design with center bottom tri-clamp drain Highest quality mirror polish finish inside and out Welded, ground, and polished interior welds provide the highest quality and are optimal for sanitation BrewBuilt Brite Tanks are perfect for carbonation, clarification, maturation, and storage of your finest brews. This tank will fit seamlessly into your brewing setup to help optimize space without compromising capacity. Featuring smooth, polished interior surfaces that make cleaning a breeze and ensures complete sanitation. These units set the standard for affordable brewing tanks without sacrificing quality. Built to handle high pressures for effective carbonation and conditioning, the BrewBuilt Brite Tank comes standard with a sealed pressure gauge and professional-quality tri-clamp PRV. The Pressure Pack, which installs in the 8" TC lid, features a floating dip tube with filter attachment that draws the clearest beer in the tank from the top down. The Pressure Pack's ball lock keg posts allow for easy integration into your draft system so you can serve directly from the tank.  The tank features a dish-shaped bottom and centered 1.5" drain pipe to allow for easy removal of trub, yeast, and other sediments that settle at the bottom of the tank to help clarify the beer and improve quality. The bottom drain also efficiently transfers beer to kegs, bottles, or cans. Features: External cooling jacket with 1.5" tri-clamp connections Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down Comes complete with 15 PSI pressure valve and sealed pressure gauge 8" lid cap opening with 8” TC clamp Extra 1.5" TC hop port on the lid 1.5" TC thermowell for inserting thermal probe Extra 1.5" TC port at the front for installing a carbonation stone or sample valve Centered bottom drain with 1.5" butterfly valve 4-leg standing design with reinforced crossbars & threaded feet Interior welds are the best in the business - uniquely ground and polished Specs: Grade 304 Stainless Steel Mirror Polish Finish Interior & Exterior Working Volume: 2 bbl Max Volume: 2.2 bbl Working Pressure: 1 Bar (14.5) Overall Height (w/ fittings): 62" All ports are 1.5" TC except 8" TC Top Port and 4" TC Pressure Pack Port  

Read more less

Now available for pre-order! The next batch of BrewBuilt® V5 BrewSculptures will be released in late September. Place your pre-order now to lock in priority fulfillment as soon as the unit is available. Introducing the Next-Generation BrewBuilt BrewSculpture™ Professional-Grade Control: Manage your entire brew day from a single, intuitive digital touchscreen. Easily program mash steps and control pumps and heating elements with a tap, providing a centralized and seamless brewing experience. Full-Draining Kettles: The completely redesigned, true welded dish bottoms ensure you get every last drop of your wort. This revolutionary design eliminates the need for tilting and makes cleanup significantly easier. Innovative Mash Tun with Grain Door: Say goodbye to scooping heavy, spent grain. Our integrated grain door and stainless steel grain chute let you easily empty the mash tun into a disposal bucket, keeping your brew day clean and efficient. Tangential Boil Kettle: The integrated tangential whirlpool arm creates a powerful vortex, compacting hop and trub matter into a tight cone for a clear, sediment-free transfer to your fermenter. An integrated cooling jacket also helps rapidly chill your wort. Experience the pinnacle of home brewing with the new BrewBuilt BrewSculpture™. This all-in-one electric brewing system combines the trusted control and performance of our original designs with the latest innovations in brewing vessel technology, all managed through a unique digital touchscreen controller. The result? A pro-grade, all-electric sculpture engineered for efficiency, precision, and an unbelievably clean brew day, with the entire system controlled from one intuitive interface. At the Heart of the System: Full-Draining Kettles and Integrated Work Table We've completely redesigned our kettles to be the most drainable on the market. Featuring a true welded dish bottom, these kettles ensure you get every last drop of your precious wort. The revolutionary design means no more tilting, no more lost volume, and a far easier cleanup. Complementing this, a new integrated work table, sourced overseas, features a recessed top and drain, providing a dedicated and convenient space for all your brewing tasks. Mash Tun with Grain Door: Say goodbye to scooping heavy, water-logged grain. Our innovative mash tun features an integrated grain door, allowing you to simply open the chute and empty spent grains directly into a bucket or disposal bag. The included stainless steel grain chute ensures a clean and mess-free transfer. Boil Kettle with Tangential Arm and Cooling Jacket: Our new boil kettle is built for performance. The integrated tangential whirlpool arm creates a powerful vortex, compacting hop and trub matter into a tight cone at the center of the kettle, leaving you with a clear, sediment-free transfer to your fermenter. Additionally, the integrated cooling jacket allows for rapid chilling, bringing your wort down to pitching temperature faster than ever. Unmatched Power and Control with a Single Interface Powered by our proven control system, the new BrewSculpture puts you in command of your entire brew day through its unique digital touchscreen controller. The intuitive touchscreen interface allows you to program mash steps and control every pump and element with a tap of your finger, providing a seamless and centralized brewing experience. SlingBlade™ Heating Elements: Our unique crescent-shaped SlingBlade™ heating elements are engineered to promote a vigorous, rolling boil without scorching your wort. Their ultra-low watt density design transfers heat efficiently while staying out of the way of your whirlpool arm and other kettle accessories. Built for Life: Like all BrewBuilt products, this Brew Sculpture is built to last. The heavy-duty, TIG-welded 304 stainless steel frame is designed for a rock-solid, corrosion-resistant foundation for a lifetime of brewing. The new BrewBuilt BrewSculpture™ is more than just a brewing system—it's a professional-grade, all-electric brewery that fits in your home, controlled effortlessly from a single, advanced digital interface. It’s a testament to over two decades of R&D and a commitment to helping you brew your best beer.   Please Note: The BrewSculpture™ power box includes a 6 ft cord with an L6-30P plug (two for the 1BBL model); if your outlet is further than 6 ft away, we offer a compatible 10 ft extension cord. For your safety, DO NOT string multiple extension cords together, as the increased electrical resistance creates a significant fire hazard. Please ensure your setup reaches your power source using only a single extension.    

Read more less

An easy drinking beer with a light color and low ABV. Citrus and tropical fruity hop character on full display Includes Magnum and Citra® hops Estimated ABV: 4.4% Estimated IBUs: 31 Makes 5 gallons of finished beer One of our most refreshing ingredient kits available!  Citra® Session Pale Ale is an easy drinking beer with a light color and low ABV. With a fairly basic malt bill and clean bitterness from Magnum hops, the flavor profile of Citra® is really able to shine through with all of its citrus and tropical fruity goodness. If you're looking for a clean, hoppy beer that allows you have a few without the IPA buzz, then the Citra® Session Pale Ale should definitely be on your radar! Makes 5 gallons Estimated Original Gravity: 1.040-1.045 SRM (Color Range): 5 IBUs: 31 Estimated Alcohol Percentage: 4.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.   Citra® is a registered trademark owned by Hop Breeding Company.  

Read more less

LP12 5-pin cable for CAN devices. 1m or 3.2 feet in length. Brewtools Product Number: 7713276

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase a TC Kettle. Designed to work perfectly with TC Ss Kettle including the Brewmaster Editions. Kit Includes: Thermometer | 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Tubing | ½” ID Silicone (5ft) Hose Clamps (2)

Read more less

Made specifically for whirlpooling, this fitting angles ricrculating wort along the kettle wall for a more efficient whirlpool effect Doubles as a kettle maximizer, allowing you to pull wort from below the depth of your kettle's bottom port Rotate to your preferred pick-up height in the kettle to leave trub behind when transferring to fermenter Compatible with kettles 12" in diameter and larger This unique tri-clamp fitting works perfectly for whirlpooling hops at the end of the boil and doubles as kettle maximizer when transferring out to your fermenter. When recirculating wort through the bottom port, wort will be returned to flow along the kettle wall for a more efficient whirlpool effect, drawing vegetal matter into the center of your kettle. When transferring wort out, the fitting will then pull from the side of the kettle where matter has been cleared, and by angling the end of the tube downwards, you'll be able to pull liquid from below the depth of your kettle's bottom port without the need to tip your vessel. 1.5" tri-clamp Length from T.C. to tube bend: 7" (approx.) Length from tube bend to outlet: 9" (approx.) Made from stainless steel

Read more less

This 1 Gallon Starter Kit is the the easiest way to get started homebrewing! Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours! Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you! If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for. Equipment Kit Contents Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar Fermenter Jar Lid w/ 3-Piece Airlock Mini Auto-Siphon makes transfers a breeze Food-Grade Transfer Tubing Premium Bottle Filling Wand Bottle Capper Sanitizer Concentrate Summer Wheat Recipe Kit (see below for more info) Summer Wheat Recipe Kit A mild, low-bitterness, smooth beer for easy, frequent drinking. The perfect summer time thirst quencher! Because of it’s clean, mild profile, this beer is an excellent candidate for incorporating fruit extracts, flavorings or other ingredients to customize your brew! Color/Body: Blond/Light Bitterness: Low Estimated Alcohol: 3.8% Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including: Specialty Steeping Grains Fermentable Malt Extract Brewer’s Hops Brewer’s Yeast Disposable Grain Bag (for recipes w/ steeping grains only) Carbonation Drops Bottle Caps *Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Stone Brewing Company A huge oatmeal stout that draws bitterness from cacao nibs added to the kettle in addition to hops Includes a single addition of Willamette hops Estimated ABV: 9.4% Estimated IBUs: 45-48 Makes 5 gallons of finished beer Founded in 1996, Stone Brewing Co. has unleashed a demand for over-the-top beers. Their flagship, Arrogant Bastard Ale, challenged us to pick up a bottle and drink it, kicking off a cult-like following of the beer and the brewery. For their 12th Anniversary, Head Brewer Mitch Steele and the Stone Brew Crew worked with homebrew recipes from Brewhouse Supervisor Jeremy Moynier and Distribution Supervisor Jake Ratzke to create this huge oatmeal stout, but instead of relying on just hops for the bitterness he added some cacao to the boil kettle. The result is simply amazing! We first had this beer at the shop and thought, "We have to have this recipe"! Mitch and Greg must have felt the same way about this beer that we did and handed it over. Stone Brewing Co. is located in Escondido, Ca, so next time you are in Southern California, make it a point to stop by. They have a fantastic restaurant as well, using locally-grown food and a focus on quality. Learn more at www.stonebrew.com Like we said, this beer is huge - with over 21 pounds of grains in it, there is only one question we have for you ... is your mash tun worthy? Makes 5 gallons Estimated Original Gravity: 1.094-98 SRM (Color Range): 73 IBUs: 45-48 Estimated Alcohol Percentage: 9.4%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less