PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
Precisely control your fermentation temperature and improve the taste of your finished beer
Independently control up to four Grainfather Conical Fermenters
Compact design takes up little space in your home brewery
Cold crash beer to clarify before kegging or bottling
These systems will ship free to anywhere in the contiguous United States.
Control your fermentation temperature accurately, every time with the Grainfather Glycol Chiller! Temperature control is one of the most crucial elements for producing a good quality beer. Temperature swings can cause yeast to stress out and throw off unwanted flavors that will negatively affect your beer. Keeping the fermentation temp regulated and stable throughout the whole process will ensure you get the right flavor profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results.
Design
With a sleek and compact design, that still accommodates the full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that delivers craft brewery like results, with a small footprint.
With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 39-43°F (4-6ºC). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitizing - a true innovation for a fermenter on this scale.
Features
Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions. Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.
What's Included?
Glycol Chiller
Wall outlet power cord with plug
2 x cooling connection couplers
2 x 6.5 ft (2 m) insulated hoses
1 x Glycol Funnel
1 x silicon tube for priming pump
Propylene Glycol not included
Specifications:
LED display
1.5 Gal (6 L) glycol tank
300 W
110-120V, 60Hz
15.3" W x 17.7" D x 25.8"H
Weight: 62 lbs
CSA Certified
Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.
Replacement RAPT Controller for 35L Gen 4 BrewZillas. Compatible with all Gen 4 models. This will not work with BrewZilla Gen 3.1.1 models or older. It is also not suitable for DigiBoil units.
Please refer to the instruction manual on adjusting the controller between the Gen 4 units. There is a mechanical toggle switch on the back of the board that will need to be adjusted.
KegLand Part Number: KL20305
Holds 3/8'' racking cane and clips to carboy or bucket. Great for holding the siphon off the bottom when starting your transfer. Then you can slowly lower the bottom of the siphon cane to the bottom of the carboy/bucket by sliding the cane in the clip to help eliminate disturbing the bottom sediment layer. A must have.
This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing (D1719) or 3/8" OD stainless or copper tubing. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14564
Effortlessly transport your 65L or 100L BrewZilla or 65L DigiBoil with the sturdy rolling flat dolly, designed with precut hole configurations for secure placement Includes two locking wheels to hold your brewing system in place, ideal for cleaning on sloped surfaces or ensuring stability during use Perfect for Lift-N-Lock Pulley systems, enabling seamless movement under pulleys and convenient handling of malt pipes Easily move your BrewZilla or DigiBoil around your brewing area using this rolling flat dolly. The thick reinforced plastic dolly plate comes with two precut hole configurations suitable for 65L & 100L Gen 4 BrewZillas and 65L DigiBoils, allowing the feet of your system to slot into place for easy mobility. Two locking wheels are included so you can lock your brewery in place which can be especially useful if you move the unit to a sloped driveway for cleaning. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe. Easily move your system into position under your pulley, and when you're done mashing, pull the malt pipe out, wheel the BrewZilla away, and lower the malt pipe to the ground or into a cleaning tub. This dolly bundle is also the preferred option for 100L BrewZillas and 65L BrewZillas/DigiBoils that use tall bulky distillation heads. Compatible With: 65L BrewZilla Gen 4 100L BrewZilla Gen 4 65L DigiBoil Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 25.9" Ø x 0.7" Thick (660 mm x 20 mm) BrewZilla sold separately
KegLand Part Number: KB15697 NOTE: Due to the feet placement, the dolly plate is not suitable for the 35L BrewZilla or 35L DigiBoil.
If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that! The Gen 4 BrewZilla nixed the overflow pipe, so this is a direct replacement part for that unit. But this screen can also be used with the Gen 3 BrewZilla if you don't use the overflow pipe.
KegLand Part Number: KL14243
This is a replacement BrewZilla PPSU Sight Glass tube. This is a one size fits all sight glass for multiple models and sizes. You will need to cut down the 39" PPSU tube to fit your specific model of BrewZilla depending on the length of the recirculation arm. We recommend purchasing the Pipe Cutter to cut the tube cleanly. If your unit did not already include the sight glass, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. See the video below showing you how to measure and install this on a BrewZilla. Specifications: 39.3" (100cm) Long 0.51" ID x 0.59" OD (13mm ID x 15mm OD) Temperature Rating: 356°F (180°C) KegLand Part Number: KL3380
For use with the 65L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 65L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 65L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps.
You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm.
Compatible with 65L Gen 3 / Gen 4 BrewZillas.
Example image of the 35L model shown here.
KegLand Part Number: KL32834
Provides a bold hit of Orange Creamsicle and with hints of sweet berry and mint
Performs well for both bittering dark beers and as a late aroma addition aroma for Lagers and IPAs
Alpha Acids: 7.0 – 9.0%
T-90 Hop Pellets
A unique "transatlantic" collaboration between Puterbaugh Farms in Washington and Charles Faram in the UK, Karma™ is a versatile, dual-purpose hop designed for the modern brewer. Brewers can expect a bold hit of Orange Creamsicle followed by undertones of sweet berry and crisp, refreshing mint finish. Whether used for bittering or late-addition aroma, Karma™ brings a bright, fruity complexity to any recipe.
For Light Styles: Enhances the crispness of Pilsners and Lagers with a refined fruit aroma.
For Hop-Heavy Ales: Excellent for layering in Hazy IPAs or Pales to balance out "heavy" tropical or resinous notes.
For Dark Beers: Its consistent bittering and subtle aroma make it an ideal baseline for malt-forward Porters and Stouts.
Hop Statistics
Alpha Acids: 7.0 – 9.0%
Beta Acids: 3.0 – 4.0%
Alpha-Beta Ratio: 1.7 – 3.0
Cohumulone: (% of alpha acids): 36%
Total Oil: 0.5 – 0.9%
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
The X3 Jacketed Conical and IceMaster Max 4 work hand in glove from yeast pitching to cold crashing
External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter
Max 4 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling
With room to connect up to 4 conicals, this package is perfect for brewers planning to expand their fermentation capacity over time
Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points
The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 4? This powerful glycol chiller has more than enough cooling capacity for your chosen X3 Conical with room to add an additional three fermenters down the road.
X3 Jacketed Uni Conical & IceMaster Max 4
The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 4 makes for the perfect tag team partner, providing all the cooling capacity you'll need for up to four fermenters.
BrewBuilt Insulated Glycol Tubing Kit
In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of:
1 - Insulated Tubing Set (2 x 6' lines)
2 - High Temp Plastic Female QDs w/ 3/8" Barb*
2 - High Temp Plastic Male QDs w/ 1/2" MPT*
2 - 1.5" Tri-Clamps
2 - 1.5" T.C. Gaskets
2 - 1.5" T.C. x 1/2" FPT Adapters
*These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.
Replacement RAPT Controller for 65L Gen 4 BrewZillas. Compatible with all Gen 4 models. This will not work with BrewZilla Gen 3.1.1 models or older. It is also not suitable for DigiBoil units.
Please refer to the instruction manual on adjusting the controller between the Gen 4 units. There is a mechanical toggle switch on the back of the board that will need to be adjusted.
KegLand Part Number: KL20305
The Fermenator™ G4 Cooling Coil delivers pro-level temperature control with unmatched cleanability and performance. Its unique trombone-style design eliminates tight spaces where debris can hide, making it the easiest-to-clean coil on the market.
Crafted from full 304 stainless steel, it features two 1/2" NPT connections that feed oversized 3/4" tubes for maximum flow and efficient heat transfer. The integrated 1.5" tri-clamp port supports accessories like an airlock, blow-off tube, spunding valve, or CIP spray ball. Sanitary, durable, and built for serious brewers.
Replacement BrewZilla Gen 4 Power Circuit Board for the 35L, 65L and 100L model. Compatible with 110V and 220V models.
This will not work with BrewZilla Gen 3.1.1 models or below. It is also not suitable for DigiBoil units.
NOTE: There is currently no wiring diagram. This should only be installed as a replacement if an accident has occurred. Please consult a trained electrician who can assist you with fixing your BrewZilla.
KegLand Part Number: KL27724
Replacement 6 Watt high temperature magnetic drive pump for 110V Gen 4 BrewZillas.
This pump is not backwards compatible with Gen 3 or older units.
KegLand Part Number: KL24358
Use this lid along with the 65L BrewZilla or DigiBoil and a copper still top (DS120or DS130) to make your own easy-to-use distillery.
The lid gasket has two distinct sides, one that is rounded and one that is completely flat. When installing the gasket the flat side should be facing up. Use one hand to stretch the gasket around the lid and the other to push the gasket into the channel.
This lid has a 1.85" (47mm) hole for the still top. Lid gasket included.
Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them.
Made from 304 stainless steel
Measures 16.25" in diameter
KegLand Part Number: KL10962
Speidel has developed a stainless steel fermenting egg that combines the advantages of the egg shape with the advantages of a stainless steel tank and a unique design. The Black Eye looks like a space satellite from the outside and provides a gentle and well controllable fermentation inside. Due to its unique shape, the yeast can circulate smoothly during the fermentation phase. In science it is assumed that this free circulation is an advantage for the fermentation process and thus for the entire aroma spectrum. Thanks to the perfect welding seams and the highly smooth inner walls, the fermenting chamber is also very easy to clean.
Tank shell and tank bottom made of AISI304 stainless steel, surface IIId (2R), marbled outside
Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside
DOM NW400 centered in the middle og the tank top with flap lid with venting nozzle 2''TC
Free-standing base tank on three welded-on legs
Sampling - Weld-on thread NW10 DIN11851 with sealing cap (for the installation of sampling tap)
Racking Outlet - Weld-on 2''TC
Cooling Jacket - Laser-welded double jacket for cooling with two 1" BSP male threaded ports
Temperature Measurement - Weld-on thread NW10 DIN11851
Bottom Outlet - Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with 2''TC
The highest quality plastic ball lock quick disconnect available to homebrewers
Built-in check valve to prevent liquid from backflowing into your draft system
Smooth operation—clicks into place on keg posts and is easily removed
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Gray plastic clearly identifies the disconnect as the gas in QD
Sleep a little easier knowing this gas in ball lock with built-in check valve has your back. The internal check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube!
Why we love it: Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting.
Features:
Internal Check Valve protects your system from liquid back flow
Made in Germany and assembled in the USA by CMB.
Extremely high quality for years of service.
NSF Approved for Food Grade Service!
Build your own walk-in cooler with a standard A/C unit from any hardware or appliance store! The CoolBot enables A/C units to cool below their standard setting of 60°F, allowing you to use them as a low-cost refrigeration alternative Installs quickly with no tools or electrical know-how required—see the videos below! Perfect for turning rooms or storage sheds into a fermentation locker, keg room, wine cellar, food larder, and More!
A CoolBot allows a standard air conditioner to cool a room or space down to 35 degrees F. Installs with no tools or electrical knowledge required. Standard A/C units available from any hardware or appliance store have lots of power but they are electronically limited so that they cannot go below 60 degrees F. This is because they would freeze up. Commercial refrigeration for walk in coolers combat freeze with increased surface area on the fins as well as fans. Instead the Cool bot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60F and not freeze up. The Coolbot cannot give you 100% of the btus listed on your air conditioner nor is suitable for large brewery or winery walk ins. It is perfect for wine cellars, beer storage, fermentation, etc. Easy to install within 30 minutes with no tools or electrical knowleged required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google Coolbot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service. This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running. Residential A/C units are made for efficiency. The Coolbot will also shut down the compressor for short time when the unit is running at its highest level of inneficiency, as it nears freeze up. Dims of the CoolBot are 6.5x3.5x1.5 in. Product Introduction DIY Indoor Cooler Mobile Walk In Cooler For the WiFi-enabled model, see the CoolBot Pro.
This is a replacement 175°C (347°F) thermal cut out switch for the BrewZilla 220V 35L, 65L & DigiBoil 65L Units.
This thermal cut out switch is mounted directly to the heating element so as soon as the heating element get too hot the bi-metal switch will activate and cut the power to the element. It can also trigger an E3 or E4 error when this happens on the display.
This false bottom is specifically designed for the Gen 4 35L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump.
It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom.
Includes 2x Eye Bolt Assemblies.
KegLand Part Number: KL27304
GOpump10 is an intelligent pump for pumping wine or similar fluids. It can be used in "PUMP" mode where the delivery rate is automatically controlled at the user's set flow rate or in "BATCH" mode where the user's preset volume is delivered at the user's set flow rate.
Two versions are available: GOpump10 and the lower cost GOpump10-LC. The GOpump10 features a magnetic induction sensor and is Bluetooth enabled with a free companion app. The GOpump10-LC has mechanical vane sensor and does not have Bluetooth capabilities.
Usage: general purpose winery pump for transferring or filling wine. Built-in accurate totalizer provides accurate estimate of total wine transferred. Controllable flow rate allows gentle or rapid transfer of wine. Automatic shutdown on empty detection.
NOTE: Do not use with fluids containing particles larger than 100 microns. Use inlet strainer. DO NOT use to pump grape must.
Dimensions: 11.5" x 13" x 7"
Weight: 17 lbs
Flow range: 0.26-2.6 GPM
Batch range: 0.1 to 9999 Liters (accuracy +/- 10mL)
Sensor: High accuracy magnetic induction
Power: 115/230 VAC 2A with built-in GFI
Interface: Color LCD touch panel
Environmental: IP65 splash-proof
Process connection: 1/2" FNPT inlet and outlet. Tri-clamp fitting, strainer, sight glass included
Remote: Bluetooth with free mobile App
This false bottom is specifically designed for the Gen 4 65L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump.
It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom.
Please Note: These are slightly looser in fit for ease of use. These only come with one eyebolt as the spec change means that the additional eyebolt is no longer required.
KegLand Part Number: KL27311
If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that! The Gen 4 BrewZilla nixed the overflow pipe, so this is a direct replacement part for that unit.
KegLand Part Number: KL27397
If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy is a great value if you're looking for a stainless steel fermenter with built-in heating control. If you live in a cold climate, ale fermentations may be a seasonal affair, as cold ambient temperatures can easily drive down the temperature of your wort below your yeast's optimal fermentation temp range. The Bucket Buddy offers a simple solution with an integrated heating element and digital temperature control. Program your fermentation temperature and if the temp drops below your set point the unit will gently heat your wort from the bottom up via the concealed element located in the base. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be taped to the side of the fermenter to control your cooling source, or you can drill another spot in the lid for a thermowell. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. To help maintain a steady temperature and cut down on power consumption, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: 304 stainless steel construction 17.1 gallon total capacity Digital temperature control 110V / 60W power Stainless steel outlet valve with rotating racking arm Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. The 65L Bucket Buddy is appropriate for warm fermentations such as kveik. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL23061
Performs reliably in difficult fermentations, including low nitrogen musts and high alcohol potential
Ideal for restarting sluggish or stuck fermentations
Tolerates extreme conditions: low temperature, low pH, high alcohol, and high sugar
Neutral sensory profile preserves varietal character and wine structure
Strong fermentation kinetics with rapid yeast biomass development
Enartis EZ Ferm 44 is a high-performance yeast strain developed for use in particularly challenging fermentation environments. It is especially effective in musts with low available nitrogen, high sugar content, and low temperature — conditions that often lead to sluggish or stuck fermentations. Its strong fermentative power, high alcohol tolerance (up to 17% v/v), and rapid biomass development make it an excellent choice for fermentation rescue operations and for fermenting difficult lots where reliability is critical. Rather than contributing intense aromatic esters, EZ Ferm 44 has a neutral profile that allows varietal and terroir characteristics to show through. It is also useful when the winemaking goal is to preserve structure and freshness without adding fruity overtones.
Protocol for Use:
Rehydrate in 10 times its weight of water at 35–38°C (95–100°F) for 20 minutes. After rehydration, slowly adapt the yeast to the must temperature by gradually adding must in small volumes over 10–15 minutes. Avoid temperature shocks greater than 10°C (18°F) between the yeast slurry and must. Inoculate immediately after acclimation is complete. For stuck fermentation restarts, follow a full restart protocol including detoxification and yeast acclimatization.
Usage Rate:
Recommended dosage is 20–30 g/hL
— 0.2–0.3 g/L
— 0.76–1.14 g/gal
The new GOfill bottle filler makes filling inexpensive, easy, prevents oxidation, and has a built-in pump. It is the perfect solution for small volume wineries.
Connect to a vessel containing wine to be bottled. Wine is collected in a single-use liner, automatically kept full by the pump. “A simple solution to minimize cleaning and oxidation as the fill liner is closed with no headspace – a signature of GOfermentor.” says Dr Singh, the inventor of a series of innovative products for the winery.
The liner feeds four bottle filling heads simultaneously using gravity flow. Filling can be paused for hours with no oxidation. Keep filling as long as you want, the pump refills the liner automatically. When bottling is complete – simply discard the fill liner and rinse the heads.
Gravity filling heads provide simple, reliable operation with minimal foaming. The disposable feed liner decouples filtration from the bottling operation, enabling one person operation. The smart pump automatically shuts off if there is no flow of wine, preventing air from contacting wine in the fill liner.
1. FOUR HEADS: Four gravity filling heads. 240 bottles per hour.
2. DISPOSABLE FILL TANK: Single-use liner feed tank – no washing, no oxidation, no contamination.
3. BUILT-IN PUMP: Built-in pump and automatic fill liner volume control.
4. AUTO-SHUTOFF: Liquid-out detector with automatic pump shutdown
Specifications:
Bottle rack is adjustable for different size bottles
Machine fills bottles to user-set level in bottle neck
Counter top unit
Requires 115VAC 10A household power
Dimensions: 18" x 18" x 38"
Weight (empty): 40 lbs
Fill bag capacity: 3 to 20 liters (user-set)
Filter housing and filters are not included
Tight temperature control is a vital part of creating quality beer. That’s why our Fermenator™ Jackets ensure even temperatures, minimal condensation, and top-notch energy efficiency. From the reflective radiant barrier to the thick closed cell foam insulation, you won’t find better performing jackets anywhere!
Please Note: These jackets are only compatible with the F3 Fermenator™. They are not compaible with the G4 Fermenator™.
Replacment malt pipe for the 65L BrewZilla Gen 4. This unit is not suitable for older generation BrewZillas or DigiBoils.
KegLand Part Number: KL32797
Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
Replacement false bottom for the 35L Gen 4 BrewZilla. Includes eye bolt pull-ring assembly.
Not compatible with older models of BrewZilla or the DigiBoil.
KegLand Part Number: KL27304
Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating!
Heating is 10% faster and heat loss from the boiler is reduced by 50%
Remove the jacket after the boil to speed up chilling
Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap
Sparge arm sleeve included to reduce heat loss during mash recirculation
Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash.
This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located.
Features:
10% faster heat up time
50% less heat loss from boiler
Fits the 100L BrewZilla Gen 4
Made from 8 mm thick neoprene which is easy to wash after use
KegLand Part Number: KL24389
The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure.
It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria.
Features:
Ferment, carbonate, and serve all from a single vessel
Sanitary sample valve with rotating racking arm
Keg can be used as a fermentor or a serving keg
Cleaning made easy with a removable bottom
1.5 in. butterfly dump valve
Rated up to 50 psi
Made from sanitary stainless steel
Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
