This new Blichmann Engineering innovation redefines electric heating! Unrivaled performance, speed, and simplicity. Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker™ brew pot. It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template. We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end. Hot, fast, and easy. Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates. Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot! Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling The BoilCoil™ includes a "plug and play" 12 ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!). Simple installation requires drilling only two small 5/8" holes with our handy drill template. No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles. The BoilCoil™ will fit in most competitive pots too! See data tab for dimensional drawing. Couple with the electric BrewCommander™ controller for the ultimate in temperature control. Kettle Size: For 15 gal Boilermakers™ Rated Voltage (VAC): 240 v Recommended GFCI Breaker Size: 20/30 amp Power (W): 4500 W
The 20 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. This US made single piece construction pot carries a lifetime limited warranty. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs!
The hole in the top left of our picture is designed for use with the dip tube that is part of every BoilerMaker Kettle. Click on the second picture there to get a better view of how the screen would look setup with the dip tube!
Please Note: This false bottom is designed to work with both G1 and G2 models of Blichmann Boilermakers.
The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it's being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58°F - 88°F, and has 3/8" in and out posts.
Note- Clean with mild detergent only, using warm (no hotter than 140°F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.
The 30 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own. Imported pot, assembled in USA with additional USA components. Lifetime limited warranty.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
Please Note: 30 & 55 gallon G2 Boilermakers will come equipped with G1 Lids (see image for details)
The Push-In Pressure Gauge is the ideal companion for the BlowTie spunding valve (FE960). It comes with an 8 mm (5/16 in.) barb, specifically designed to be compatible with 8 mm Duotight fittings. By pairing this pressure gauge with the BlowTie, you'll be able to easily set your blow off pressure when using the BlowTie for pressure fermentations or pressure transfers. The dial face is triple-scaled to read in psi, bar, and kPa. 8 mm (5/16") push-in barb Rubber coated to protect gauge 0-40 psi / 0-2.5 bar / 0-250 kPa Kegland Part number: KL07696
This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 5 gallon batches
Includes Stainless Steel AutoSparge™
Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm
Please Note: This product is the adapter kit only. It does not include the required 7.5 gallon G1 BoilerMaker Mash Tun, 10 gallon G1 BoilerMaker Boil Kettle, Heat Source or Pump. For a complete system, see the line of Turnkey BrewEasy Systems. If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.
The 1/5 HP Centrifugal Pump from Blichmann Pro Brewing is your brewery’s all-in-one brewing filtration and beer transfer pump. Our complete brewing pump kit has everything you need in one package — no guesswork, no extra parts to chase down. At the heart of the system is the trusted 1/5 HP March pump, delivering a strong 18 GPM flow rate and built for high-performance brewing operations. It includes a sturdy stand, ergonomic carry handle, diaphragm valve for precise flow control, and all pictured fittings — ready to go right out of the box. It’s purpose-built for filtration, beer transfer, and clean-in-place (CIP) in commercial brewing environments.
Designed to save time and streamline setup, this kit offers professional-grade durability, leak-free performance, and the reliability brewers need on busy brew days.
Features:
Delivers High-Performance Flow: Delivers high-performance flow for demanding commercial brewing tasks like beer transfer, filtration, and CIP.
Complete, Ready-to-Use Kit: Unlike other options on the market, our 1/5 HP Centrifugal Pump includes a stand, ergonomic carry handle, diaphragm valve, and all the necessary fittings—no extra parts are needed. Ready to use right out of the box.
Pro-Grade Durability & Leak-Free Design: Built for commercial brewing environments with a reliable, time-saving setup and long-lasting performance.
1/5 HP Centrifugal Pump Kit Parts: 1/5 HP mag-drive Centrifugal Pump Stainless steel stand with slip-resistant handle and rubber feet 115V UL power cord 1.5″ tri-clamp adapters for inlet and outlet 1.5″ tri-clamp clamp and gasket 1.5″ tri-clamp sanitary diaphragm valve for precise flow control
Tight temperature control is a vital part of creating quality beer. That’s why our Fermenator™ Jackets ensure even temperatures, minimal condensation, and top-notch energy efficiency. From the reflective radiant barrier to the thick closed cell foam insulation, you won’t find better performing jackets anywhere!
Please Note: These jackets are only compatible with the F3 Fermenator™. They are not compaible with the G4 Fermenator™.
Spunding valve for manual pressure setting. Adjustable from 0-2.2 bar (0-32 PSI) with a maximum deviation of 0.2 bar.
We recommend disassembling the valve and lubricating all silicone parts with silicone grease before use.
The polycarbonate glass should not be cleaned with PBW or other caustic chemicals.
Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 2000 W, 120V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process! Features: The RIMS-Rockettm heating element is 2000 W, 120V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable! The RIMS-Rockettm heater assembly clamps right into our HopRockettm canister for added versatility and lower cost. The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.
Endless Possibilities Start Here
Blichmann Modular Utility Cabinets give you the freedom to create exactly the setup you need — and expand it anytime.
Thanks to our patent-pending accessory mounting locations mount shelves, hooks, racks, lights, or custom add-ons anywhere, and reconfigure them whenever you want.
Ultimate Homebrew Station — Perfectly organized for brewing, fermenting, and kegging with easy access to all your gear
Complete Outdoor Kitchen — Built for weekend cookouts with space for grills, prep surfaces, and storage
Backyard Bar — Entertain in style with room for drinks, glassware, and everything you need for guests
Heavy-Duty Tool Bench — Tough enough for the workshop with secure storage for tools and equipment
Connect multiple units side-by-side in minutes for a seamless, custom workspace that grows with you.
Crafted with a premium stainless steel countertop and a rugged black powder-coated steel body, every Modular Utility Cabinet is built to handle the elements and the toughest jobs. The base cabinet includes the stainless top, your choice of door/drawer configuration, and adjustable leveling feet for rock-solid stability on any surface. Add optional heavy-duty casters for easy mobility, or fold-down side tables (small or large) that tuck away for compact storage.
Expand your setup with genuine accessories
Integrated sink with faucet
Pegboard for instant tool organization
Grain hoist (designed specifically for basket-lift systems)
Controller mount for temperature controllers
Fold-down side tables and more
From passionate home brewers to serious outdoor enthusiasts, our Modular Utility Cabinets deliver the same innovation, quality, and performance you’ve come to expect from Blichmann Engineering — now built for your entire outdoor space.
Ready to design your perfect setup?
Specifications:
Dimensions: Approx. 24" W x 24" D x 36" H
Top Surface: 304 stainless steel, brushed finish – hygienic, durable, heat/corrosion-resistant
Body & Panels: Heavy-gauge steel with black powder-coat finish for scratch and weather resistance
Drawer: 3 full-width drawers with soft-close slides and your choice of handles
Base: 4 adjustable leveling feet (included) for perfect stability on any surface
Optional Mobility: Heavy-duty lockable casters (sold separately)
Weight Capacity: Engineered for heavy loads (full kegs, toolboxes, grain bags, etc.)
Modular Design: Pre-drilled side panels with included hardware for seamless side-by-side connections
Assembly: Bolt-together design; clear instructions included
What's Included:
Modular Utility Cabinet base with premium stainless steel top
Three soft-close drawers with handles
4 adjustable leveling feet
Modular connection hardware (for linking to additional units)
Assembly instructions
Note: Casters, fold-down side tables, pegboard, backsplash, sink, grain hoist, controller mount, and other accessories sold separately.
This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 20 gallon batches
Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only. It does not include the required 30 gallon G1 BoilerMaker Mash Tun, 30 gallon G1 BoilerMaker Boil Kettle, Heat Source or Pump (see related products below). For a complete system, see the line of Turnkey BrewEasy Systems. If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.
This is a weldless BrewMometer that comes with all necessary hardware for installation.
The BrewMometer is unlike any other thermometer on the market. Not only does it read the temperature - it also has suggested "ranges" for the following:
Lager Fermentation Temperature
Ale Fermentation Temperature
Dough-In
Protein Rest
Starch Conversion
Steeping
Mash-Out/Sparge
Boil
Has a 3" face. Probe length 2".
1/4" MPT on back of thermometer.
Note - This thermometer only reads Fahrenheit.
The Relay Module is used to control multiple heating elements. The Relay Module will come with a jumper cable to wire between the relay module and the BrewCommander™ controller.
240v
This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 10 gallon batches
Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only. It does not include the required 15 gallon G2 BoilerMaker Mash Tun, 20 gallon G2 BoilerMaker Boil Kettle, Heat Source or Pump (see you might also need items below). For a complete system, see the line of Turnkey BrewEasy Systems. If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.
The 7.5 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. This US made single piece construction pot carries a lifetime limited warranty. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free. Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
Ferment under pressure with precisely tuned pressure settings
Pressure fermentations help to suppress unwanted esters
Make clean lagers faster and at higher temperatures
Easy-to-read etched pressure scale from 15 to 30 psi
Hand adjustable—turn clockwise or counterclockwise to raise or lower your setting
Made from 304 stainless steel with polycarbonate cylinder
MB is a brand dedicated to crafting and sourcing high-quality, professional-level brewing supplies
The MB T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with any pressurizable stainless steel conical with 1.5" T.C. top ports. For larger units, the spunding valve can also be integrated into the blowoff pipework and used with a pressure gauge and tri-clamp tee. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.
Adjustable from 15-30 psi
Made from 304 stainless steel
11.75" H x 4" Ø
For Your Safety: Never exceed the maximum rater working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 5 gallon batches
Includes Stainless Steel AutoSparge™
Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm
Please Note: This product is the adapter kit only. It does not include the required 7.5 gallon G2 BoilerMaker Mash Tun, 10 gallon G2 BoilerMaker Boil Kettle, Heat Source or Pump. For a complete system, see the line of Turnkey BrewEasy Systems. If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.
If you prefer a hoppy beer, you’re likely concerned with keeping the hops in your boil kettle and out of your fermenter during your home brewing. The Blichmann Hop Blocker is a handy brewing accessory that promises to keep those hops out of the fermenter and securely in the boil kettle, all without disrupting the rest of the brewing process.
Through rigorous and repetitive testing, Blichmann Engineering has determined that the 90 percent to 95 percent of the hop material is left behind when using the Blichmann Hop Blocker to transfer your brew to the fermenter. While many traditional screen filters draw from the bottom of the kettle and often plug the screen, the Hop Blocker drains the majority of the wort from the top down, enabling the hops and trub to settle undisturbed at the bottom of the kettle. The filter works on just a small portion of the wort instead of the entire thing, making it much less disruptive.
The Blichmann Hop Blocker is designed for use with pellet hops only, not with whole, loose hops, as those could clog the Hop Blocker.
Extend your workspace instantly with the Blichmann Foldable Table Extension. This accessory adds a full 32 inches of extra width (24 inches deep) to your Modular Utility Cabinet setup, giving you significantly more countertop space for prep, serving, brewing, or grilling whenever you need it.
Crafted with a matching stainless steel top and a sturdy black powder-coated steel frame, the extension folds down flat against the cabinet for compact storage and deploys quickly with a secure locking mechanism.
Key Features:
Adds 32" wide x 24" deep of additional countertop space
Folds down compactly when not in use
Matches the premium stainless steel top of your Modular Utility Cabinets
Sturdy locking legs for excellent stability
Easy bolt-on installation using the cabinet's pre-threaded side ports
Perfect for expanding your outdoor kitchen, brew station, or grill area without permanently increasing your footprint
Deploy it when you need the space, fold it away when you don't
The Blichmann Stainless Steel QuickConnectors are great for a number of different reasons! Not only do they work with all 1/2" NPT (extremely universal), they also come in multiple different sizes and configurations.
Stainless steel and silicone construction
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced
Adapts all male 1/2" NPT fittings to 1.5 in. TC
Upgrade your Fermenator™ G4 Fermenter’s mobility with the G4 Caster Kit™. This optional add-on includes durable casters and front/rear-mounted handles for smooth and effortless movement. Working on uneven or rough surfaces? Add the caster extension frames for enhanced stability and confidence wherever you roll.
Love the Blichmann QuickCarb, but want to use it on a commercial sankey keg? Now's your chance!
Quickly carbonate beer in commercial sankey style kegs
This coupler adapter kit adapts the QuickCarb to work with commercial sanke keg couplers. It also increases the power supplied to the pump to be able to handle full sized 1/2 bbl kegs.
Includes:
2 x coupler wing nuts
2 x 1/4 in male flare
2 x coupler washers
12v DC power adapter
This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 20 gallon batches
Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only. It does not include the required 30 gallon G2 BoilerMaker Mash Tun, 30 gallon G2 BoilerMaker Boil Kettle, Heat Source or Pump (see related products below). For a complete system, see the line of Turnkey BrewEasy Systems. If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.
These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs!
The hole in the top left of our picture is designed for use with the dip tube that is part of every BoilerMaker Kettle. Click on the second picture there to get a better view of how the screen would look setup with the dip tube!
Please Note: This false bottom is designed to work with both G1 and G2 models of Blichmann Boilermakers.
If you’re looking for a truly state-of-the-art brew pot for your mid-size beer batches, the BoilerMaker™ G2 15 Gallon Brew Pot from Blichmann Engineering is the perfect choice. This small yet high tech brewing kettle is built with a single piece of heavy gauge, weld-free stainless steel that is designed to last for years to come, and its improved surface means it is much easier to cleanup once you’re done brewing for the day.
The BoilerMaker™ G2 15 Gallon Brew Pot is packed with more incredible features than you can even imagine, including cool touch custom molded grips, a durable, easy-to-read sight gauge, snap-in drain tube, and the informative BrewMometer™ thermometer. Other optional Blichmann accessories include the Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, as well as an included parabolic valve that provides linear flow for unparalleled flow control throughout the brewing process.
Also available in the following sizes:
· BoilerMaker™ G2 7.5 Gallon
· BoilerMaker™ G2 10 Gallon
· BoilerMaker™ G2 20 Gallon
· BoilerMaker™ G2 30 Gallon
· BoilerMaker™ G2 55 Gallon
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
This cable is designed to connect the Tower of Power Control Module to a computer. This allows you to automatically control your mash profile through your PC computer. It will remotely monitor your mash, and you can create unlimited mash profiles.
Endless Possibilities Start Here
Blichmann Modular Utility Cabinets give you the freedom to create exactly the setup you need — and expand it anytime.
Thanks to our patent-pending accessory mounting locations mount shelves, hooks, racks, lights, or custom add-ons anywhere, and reconfigure them whenever you want.
Ultimate Homebrew Station — Perfectly organized for brewing, fermenting, and kegging with easy access to all your gear
Complete Outdoor Kitchen — Built for weekend cookouts with space for grills, prep surfaces, and storage
Backyard Bar — Entertain in style with room for drinks, glassware, and everything you need for guests
Heavy-Duty Tool Bench — Tough enough for the workshop with secure storage for tools and equipment
Connect multiple units side-by-side in minutes for a seamless, custom workspace that grows with you.
Crafted with a premium stainless steel countertop and a rugged black powder-coated steel body, every Modular Utility Cabinet is built to handle the elements and the toughest jobs. The base cabinet includes the stainless top, your choice of door/drawer configuration, and adjustable leveling feet for rock-solid stability on any surface. Add optional heavy-duty casters for easy mobility, or fold-down side tables (small or large) that tuck away for compact storage.
Expand your setup with genuine accessories
Integrated sink with faucet
Pegboard for instant tool organization
Grain hoist (designed specifically for basket-lift systems)
Controller mount for temperature controllers
Fold-down side tables and more
From passionate home brewers to serious outdoor enthusiasts, our Modular Utility Cabinets deliver the same innovation, quality, and performance you’ve come to expect from Blichmann Engineering — now built for your entire outdoor space.
Ready to design your perfect setup?
Specifications:
Dimensions: Approx. 24" W x 24" D x 36" H
Top Surface: 304 stainless steel, brushed finish – hygienic, durable, heat/corrosion-resistant
Body & Panels: Heavy-gauge steel with black powder-coat finish for scratch and weather resistance
Door: Full-height lower door with soft-close hinges and matching handle
Base: 4 adjustable leveling feet (included) for perfect stability on any surface
Optional Mobility: Heavy-duty lockable casters (sold separately)
Weight Capacity: Engineered for heavy loads (full kegs, toolboxes, grain bags, etc.)
Modular Design: Pre-drilled side panels with included hardware for seamless side-by-side connections
Assembly: Bolt-together design; clear instructions included
What's Included:
Modular Utility Cabinet base with premium stainless steel top
Full-height door and handle
4 adjustable leveling feet
Modular connection hardware (for linking to additional units)
Assembly instructions
Note: Casters, fold-down side tables, pegboard, backsplash, sink, grain hoist, controller mount, and other accessories sold separately.
