Our patent-pending G2 Linear Flow Valve is tailored specifically for brewers. Fine-tune your flow rate for sparging, lautering, and chilling and increase the repeatability of your system. Tool-free assembly allows easy cleaning. Fits 1/2” NPT.
The Blichmann Engineering HellFire™ XL Burner fits kettles up to 25"! Including the 55 Gallon BoilerMaker™ Kettles.
There's your everyday homebrew burner, and then there's the HellFire™ Burner! No doubt in a league of its own, the HellFire™ burner is the best burner on the market, and one that will not only make your brew day quicker, but will also last you for years of brewing to come. It's dual mode capability allows you to switch between High Efficiency mode (80,000 BTUs) and HellFire™ mode (140,000 BTUs).
Efficient, fast, and versatile. The new burner from Blichmann Engineering is appropriately named HellFire™! This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs. No wonder it is patent pending! This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode. In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design. Waiting for a boil is now a thing of the past. In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. Even our efficiency mode has significantly more power than the competition! To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort.
Features:
Dual mode capacity
High Power Mode: 140,000 BTU/hr
Efficiency Mode: 80,000/hr
Patent Pending Clip-on Heat Shield keeps valves cool
Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter
Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years!
Designed for outdoor use, the heat shield and body will protect your brew from wind
The Blichmann Stainless Steel QuickConnector sets are great for a number of different reasons! Not only do they work with all 1/2" NPT (extremely universal), they also come in multiple different sizes and configurations.
Stainless steel and silicone construction
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced
Fits all male 1/2" NPT fittings
The BrewEasy™ Compact All-Grain Brewing System by Blichmann Engineering is the ultimate solution for homebrewers seeking a space-saving brewing setup without compromising on quality. Designed for efficiency, this 2-vessel system uses the innovative Kettle-RIMS process to deliver precise temperature control and crystal-clear wort, eliminating the need for sparging and heavy lifting. Perfect for brewing 5-gallon batches with up to 12 lbs of grain in a 5-gallon BoilerMaker kettle, the BrewEasy™ Compact fits seamlessly into smaller spaces—ideal for apartments or compact breweries. Available in gas or electric (120V/240V) with the patented Boilermaker Surface for easy cleaning, this system ensures a hassle-free brewing experience. Whether you’re new to all-grain brewing or a seasoned pro, the BrewEasy Compact offers professional-grade performance in a smaller footprint. Elevate your brewing game today with Blichmann’s trusted engineering!
System Features
10 Gallon Kettle System
The 10 Gallon BoilerMaker™ (G2 or Surface™ model) is the perfect size for a 5-gallon finished batch with up to 18 lbs of grain.
Direct Deposit Recirculation
Recirculate your wort directly to the heart of the mash for more accurate temperature control and a higher mash efficiency.
Basket
With the simple and secure side catches, mount the heavy-duty 400-micron stainless steel basket on the rim of your kettle for sparging and capturing that last drop of wort.
Full Brewhouse Options
Build the brewhouse to match your brewing style with options for heating type, recirculation, and post-boil chilling.
Welded Tri-Clamp Fittings
1.5" robotically welded tri-clamp fitting
Tri-Clamp G2 Linear Flow Valve
Looking for the perfect flow and the ability to dial it in every time? Our patented linear flow valve design packs the perfect control with a cool-to-the-touch grip.
Rotating Dip Tube
Gone are the days of transferring the hops and trub at the end of your brew day! Only rack off that high-quality crystal clear wort.
Sanitary Tri-Clamp Connections
Tri-clamp connections are sanitary, quick to move, and easy to clean.
Weldless NPT Fittings
Precision-punched NPT ports allow easy operation and leak-free connections.
Rotating Dip Tube
Gone are the days of transferring the hops and trub at the end of your brew day! Only rack off that high-quality crystal clear wort.
QuickConnectors™
Gone are the days of transferring the hops and trub at the end of your brew day! Only rack off that high-quality crystal clear wort.
Heating Options
120V or 240V Operation
We offer our electric BrewEasy™ Compact in 120V and 240V configurations to match the voltage available in your brewery.
BoilCoil™ Immersion Heater
The ultra-low-watt density BoilCoil™ heaters provide 3750 watts at 240V and 2250 watts at 120V for a scorch-free brew day.
Electric BrewCommander™ Digital Controller
The patent-pending BrewCommander™ features touchscreen operation, precise and accurate temperature control, automated step-mashing, purpose-built brewing timers, remote pump control, and more!
Surface Heating Technology
Our US Patent & Patent Pending Surface™ electric heating technology was designed to combine the best features from both Gas and Electric brewing into the Ultimate heating method providing the easiest clean-up EVER seen to date!
HellFire™ Burner
Waiting for a boil is now a thing of the past. This dual-mode, patent-pending burner has twice the power of our previous burner and is unlike anything else on the market. Whether you want efficiency or ultra-blazing heat, this burner is right for you.
Gas BrewCommander™ Digital Controller
The patent-pending BrewCommander™ features touchscreen operation, precise and accurate temperature control, automated step-mashing, purpose-built brewing timers, remote pump control, and more!
SparkBox™
The SparkBox™ Ignition Module paired with the Gas BrewCommander™ Temperature Controller provides the precise power, spark, and repeatability to turn your gas burner into an automatic brewhouse.
Accessories
RipTide™ Brewing Pump
Say goodbye to struggling with a noisy, hard-to-prime, and modified general-purpose pump. The RipTide™, featuring a carbon fiber impeller for added protection against damage caused by dry usage, is the only pump you’ll ever need. Offered in Tri-Clamp and NPT.
Return Tube
The direct deposit perforated return tube recirculates your wort directly into the heart of the mash for more accurate temperature control and a higher mash efficiency.
Flow Meter
Easy-to-use flow meter to set your mash circulation and lauter rates. Doubles as a visual wort color/clarity sight glass.
Hoses and Fittings
Includes all barbs, clamps, gaskets, and hoses needed for your brewery.
Theminator™ Wort Chiller
The Therminator™ is the fastest way to chill your wort to yeast pitching temperature and get your fermentation off to a quick, bacteria-free start.
Thrumometer™
Blichmann Engineering’s patented ThruMometer™ is the perfect pair with the Therminator™ wort chiller giving you an instant temperature reading of your wort going into your fermentor.
Immersion Chiller
Our Immersion Chiller is a simple, affordable, drop-in chilling option that comes with all hoses and fittings needed to chill your wort directly in the kettle.
Specs
Max Grain Capacity 18 lbs
Kettle Volume 10 Gallon
Max Finished Batch Size 7 Gallons (with sparging)
Min Finished Batch Size 3 Gallons
Voltage 120V or 240V
120V - 2250 Watts Heating Power
240V - 3750 WattsHeating Power
Burner Output 140,000 BTUS
Pump Max Flow 7 GPM
Pump Head Pressure 21 Feet
The 10 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. This US made single piece construction pot carries a lifetime limited warranty. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own.
All the items you need come standard, installed, and ready to use on the G2 10 gallon brew pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this 10 gallon pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
This is the heart of the system and includes the special lid that allows the pots to be stacked and the wort drain tube installed. It includes the lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the misc. fittings, silicone hose, and QuickConnector™ fittings you'll need to get up and running. Features: BrewEasy Adapter Kit for 10 gallon batches
Includes Stainless Steel AutoSparge™ Flow Control System allows for 6 levels of flow, ranging from 0.5 - 2.0 gpm Please Note: This product is the adapter kit only. It does not include the required 15 gallon G1 BoilerMaker Mash Tun, 20 gallon G1 BoilerMaker Boil Kettle, Heat Source or Pump (see you might also need items below). For a complete system, see the line of Turnkey BrewEasy Systems. If you are purchasing this kit, your kettle will require a hole to be punched for the AutoSparge™.
If you want a top of the line, electric, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The HERMS-style system comes in 5 different batch sizes listed above. The system comes with 3 Boilermaker kettles (2 electric) with 240 v BoilCoils, 2 Riptide Brewing Pumps, 2 Tower of Power Controllers, all on a large custom stainless steel table with the necessary hoses and fittings.
The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer.
Blichmann's BoilCoil are engineered to perform at their best in the Boilermaker kettles. They'll provide consistent heating, boil quality, and boil-off rates. The BoilCoil has an ultra low watt density making scorching impossible when used properly. Made from stainless steel and with an easily removable plug to clean.
The Tower of Power temperature controllers give you precise control over the temperature of your mash and your boil. They come mounted to the table for your convenience. They provide PID temperature control with a Class A precision RTD temperature sensor, all in a compact, brushed stainless enclosure.
Features:
3 - Boilermaker Kettles (2 Electric)
Made in the US with US made heavy gauge 304 stainless steel
Includes Linear Flow Valves to allow for precise control and easy cleaning
Rivet free handles, rugged cool touch grips, oriented for easy carrying
Borosilicate glass level gauge
Rotating racking arm diptubes
Blichmann provides a limited lifetime warranty on the kettles
5 gallon size includes 3 - 10 gallon kettles
10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle
15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle
20 gallon size includes 3 - 30 gallon kettles
1 BBL size includes 3 - 55 gallon kettles
2 - 240 v BoilCoils
Each BoilCoil is built for the Boilermaker kettles so you can count on consistent heating performance, boil quality, and boil-off rates.
The BoilCoils have less than ultra low watt density meaning there is no chance of scorching when used properly
Made from stainless steel
Cleaning is easy with the removable plug
The 240 v Coil includes a 12 ft cable with a molded twist lock L6-30P plug
2 - Riptide Brewing Pumps
Ultra quiet construction
Tri clamp fittings for easy cleaning and connecting/disconnecting
Linear Flow Valves
2 - Tower of Power Temperature Controllers
PID Temperature Control
On/Off/Auto mode selector
Class A precision RTD temperature sensor
Digital power control to meter the intensity of the heating element from 0-100%
Controllers come mounted to the table for ease of use
Compact, brushed stainless enclosure
*1 BBL Size comes with 2 x Tower of Power Dual Element Controllers
Heavy Duty Custom Table
14 gauge 304 stainless steel construction
Made in the USA
Drip ledge to keep your floor clean
Built-in junction boxes
Heavy duty caster make it easy to move around
Lower shelf storage
Table dimensions:
5/10/15 gallon size - 72 in L x 24 in W x 25 in H
20 gallon and 1 BBL size - 96 in L x 30 in W x 24 in H
Please Note: The assembly video below uses the RIMS system as an example.
Get your yeast started right by providing the perfect amount of dissolved oxygen in your wort. Proper oxygen levels reduce lag time for the yeast to get started and helps prevent off-flavors from stressed yeast.
Features:
Stainless steel diffusion stone
Two 1/2 in. Blichmann Quick Connectors
Oxygen Flow Regulator
5 ft. oxygen hose
Easy to clean
Does not work with disposable O2 tanks
Note: Oxygen tank not included.
Using the WineEasy™ combined fermentor and press is admittedly different than anything on the market, but is incredibly easy to use and provides results and ease of use that traditional fermenting and pressing techniques simply can't offer.
At the heart of the system is a high quality stainless primary fermentor (20, 30 and 55 gal sizes). A uniquely designed false bottom located at the bottom of the fermentor allows the pomace to be separated from the wine while draining the unit. The tines on the pressure plate support the bottom of the fermentor and perforated false bottom and keep it from collapsing from the pressure imparted by the vacuum pump.
After alcoholic fermentation, the free run is drained or pumped out of the fermentor. The sliding piston assembly is then installed. The vacuum pump evacuates the carboy (or other vacuum capable vessel) and applies a vacuum under the false bottom of the WineEasy fermentor. This causes atmospheric pressure to push down on the sliding piston pressing the pomace to the ideal maximum pressure of 14 PSI to avoid hard press conditions.
Since this is all done without transferring the pomace to a press, and is done so in a completely closed and air tight system, oxidation and contamination are virtually eliminated.
Cleanup is as easy as scooping out the dry pomace into a container and washing out the high polish stainless steel fermentor!
Features:
No messy transfers to a secondary fermentor
Less risk of contamination and oxidation
Great press efficiency
Fast
Easy to use
Simple mess-free cleanup
Produce consistently superb wines
Please Note: This 55 gallon Wine Easy requires at least 18.15 gallons of must to press effectively.
The Blichmann Universal CIP Spray Ball kit can be custom fitted to any fermentor, kettle, keg cleaner and more! All that's needed for mounting is a simple 7/8" hole. Designed to work perfectly with the RipTide Brewing Pump and the March 815 series pumps.
Full stainless steel construction
Installs anywhere with a 7/8" hole
Requires 7 gpm pump flow
In 2004, the Fermenator™ revolutionized the homebrew market as the first pressure capable homebrew conical. We are proud to announce the latest model: the Fermenator™ G4. Reimagined from the ground up, this true unitank leverages our 20+ years of experience in home and pro brewing, and our reputation of innovation. From the welded tri-clamp fittings, the 15 PSI capability, the always-sanitary aseptic racking arm, the external level gauge, and many other purpose-built accessories, you’ll find that the Fermenator™ G4 stands in a league of its own. Most competitors nickel-and-dime you with needed, but not included accessories like a sampling valve or racking arm! But not the Fermenator™ G4. We include more standard accessories than the competition at a value no one can beat.
Features:
Welded Tri-Clamp Fittings: All fittings are 1.5” tri-clamps and are sanitary welded into the heaviest gauge tank and lid on the market.
Pressure Capable Unitank: With 15 PSI (1 BAR) pressure capability, and the included integral pressure relief valve, you can ferment under pressure for reducing fruity esters in your beers, pressure transfer beer into kegs, or carbonate and use as a serving vessel.
Aseptic Racking Valve: The revolutionary patent pending aseptic racking valve takes the struggle out of keeping your sampling valve sanitary. Similar to pharmaceutical grade sampling valves, the new G4 aseptic valve can be filled with sanitizer between uses so all wetted surfaces always remain sanitized. No spraying. No worrying. No contamination.
Brushed Exterior, Polished Interior: Let’s admit it - our breweries are show-pieces for friends and families. And we work hard to keep them looking new. Like our Pro Brewing equipment, we’ve selected a sleek brushed exterior finish that is significantly easier to keep free of stains and fingerprints and gives that true pro-look to your brewery. Lastly, we’ve put a mirror polish on the interior to improve cleaning and yeast sedimentation.
Positive Seal Racking Arm: Loosening a racking arm clamp can lead to beer leaking from the joint, or worse yet, a clamp popping off and causing the loss of the full batch of beer. We’ve included an integral seal to eliminate beer leaks, and a long position indicating pin to allow the fitting to be easily rotated with minimal loosening of the clamp.
Dial Thermometer: The included tri-clamp thermometer reads in F and C, and the scale is perfect for fermentation temps.
Dimensions:
Tank Height: 55.75"
Foot Height: 1.5"
Depth (Front and Back): 24"
Width: 20.25"
Batch Size: 31 Gallons
No one wants a leak in his or her brew kettle, which is why the Blichmann BrewMometer Hole Plug Kit is such an essential part of your Blichmann home brewing setup. This innovative part can be used to plug the hole if you need to remove the thermometer from your brew kettle, and it is designed especially to fit inside of the hole left behind by the thermometer.
The Blichmann BrewMometer Hole Plug Kit can also be used to plug the thermometer hole if you decide to brew a smaller batch in a larger kettle, making your setup incredibly versaitle for any brew size. Simply drill a new hole wherever you want to place the thermometer, then use the convenient hole plug kit to securely stop liquid and heat from escaping through the exisiting thermometer hole. Because the Blichmann BrewMometer Hole Plug Kit is also made by the popular brewing brand Blichmann, you can feel confident that it will work seamlessly with your other Blichmann products.
Size: 1/2-20x1/2 hex head cap screw
Blichmann Engineering’s industrial-grade Brewing Gloves are standard issue in commercial breweries. Our own team uses them and wouldn’t brew without them, and we recommend the same for serious homebrewers.
Glove Size:
Medium - Size 9
Large - Size 10
XLarge - Size 11
This new Blichmann Engineering innovation redefines electric heating! Unrivaled performance, speed, and simplicity. Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker™ brew pot. It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template. We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end. Hot, fast, and easy. Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates. Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot! Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling The BoilCoil™ includes a "plug and play" 12 ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!). Simple installation requires drilling only two small 5/8" holes with our handy drill template. No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles. The BoilCoil™ will fit in most competitive pots too! See data tab for dimensional drawing. Couple with the electric BrewCommander™ controller for the ultimate in temperature control. Kettle Size: For 20 gal Boilermakers™ Rated Voltage (VAC): 240 v Recommended GFCI Breaker Size: 30 amp Power (W): 5000 W
Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets too high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Set Up The BlowTie spunding valve comes with 8 mm Duotight fittings on the inlet and outlet, and we recommend using it with EVABarrier 8 mm OD tubing (D1717 or D1718). You'll also need the flare Duotight fitting (DUO106) in order to attach it to a ball lock or pin lock disconnect. Dialing in your desired pressure is even easier with the BlowTie 2, thanks to the integrated pressure gauge. Simply start with the adjustment knob fully closed, then slowly open it until the gauge reading matches your desired pressure setting. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15042
The Blichmann HopRocket™ is a great tool for all hop-heads. Mainly used as a hop back, but has also been used inline in dispensing draft beer (Randal). The Hop Rocket can fit up to 3oz. of whole leaf hops to add that extra hop kick to any beer!
Pressure tight up to 40PSI!
Holds up to 3oz. of whole leaf hops
100% Stainless steel construction with silicone gaskets
No need to monitor the wort levels as it will not overflow
Fine filter with wiper seal sends very clear wort to your fermenter
Coarse filter and coned bottom inlet help prevent backup and wort channeling
Uses 1/2" NPT connections for a universal fit!
These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs!
Take precise temperature control to the next level with the Fermenator™ G4 Cooling Jacket. Designed specifically for the Fermenator G4 Conical Fermenter—perfect for lagers, sours, and precision ales. Durable, easy to clean, and made for brewers who demand pro-level fermentation control.
This jacket is included with the Blichmann G4 Fermenator™ Cooling System.
Take full control of your fermentation with the Fermenator™ G4 – Cooling System from Blichmann Engineering. Specifically designed for use with our Fermenator™ G4 Conical Fermenters, this system gives you precise fermentation temperature control — a key factor in producing consistent, high-quality beer, cider, and other fermented beverages. Built by brewers, for brewers, it’s the reliable solution your fermentation process needs.
Designed for Performance and Cleanability
The heart of this fermenter cooling system is a 304 stainless steel cooling coil. It’s easy to clean, resists corrosion, and is made for long-term use. The coil features max flow technology to keep your cooling liquid circulating smoothly and evenly, improving chill efficiency and stability. A tri-clamp port makes setup fast, secure, and sanitary — just clamp it into place and connect your chilling lines.
Whether you’re lagering at 50°F or keeping an ale steady in summer heat, this system gives you pro-level temperature control in any season. It works seamlessly with glycol chillers or other cooling setups, making it a flexible solution for both homebrewers and pilot-scale pros.
Fits All G4 Fermenter Sizes
We offer four models of the Fermenator™ G4 – Cooling System, each tailored to match our fermenter lineup: 7-gallon, 14-gallon, 19-gallon, and 1 BBL. The 1 BBL model is especially popular with startups and nano-breweries for its reliable performance and scalability. Whether you’re just starting out or scaling up, there’s a fit for your fermenter.
The patent-pending G2 Linear Flow Valve is now in tri-clamp! Easily fine-tune your flow rate for sparging, lautering, and chilling, increasing the repeatability of your system. The built-in 90-degree outlet can be oriented at any angle, making hose routing simple and kink-free. Eliminate those extra elbows and other fittings on the valve for clean and simple routing. Unlike other valves, the new G2 valve disassembles in seconds for a quick cleaning! The cool-touch silicone grip makes handling under fire easy, and the silicone material handles temps to 600°F so it won’t melt like vinyl grips on ball valves do. The G2 linear flow valve is one of the many features tailored specifically for brewers.
Most oxygen regulators only regulate pressure but the Blichmann Oxygen Flow Regulator allows you to dial in the actual rate of flow. Turn the dial to your preferred flow rate, measured in liters of oxygen per minute, and you can feel confident in knowing precisely how much oxygen is being introduced into your wort. It is important to know the flow of oxygen because depending on your downstream restriction the actual flow can vary a lot. Remove the guess work with the Oxygen Flow Regulator from Blichmann.
Measuring your dissolved oxygen usually would run you $300 or more but with the Oxygen Flow Regulator you can know exactly how much oxygen was put into your wort for less than $50.
Tank connection CGA 540, oxygen outlet connection 1/4" male flare
2.5 Gallon Propylene Glycol Concentrate (DowFrost™inhibited propylene glycol) heat transfer fluid provides years of reliable corrosion protection in demanding applications such as fermentation cooling, immersion freezing, and food applications. Compliant with USDA and FDA regulations, this product is ideal where contact with food or beverage may occur.
Features:
Wide Temperature Range: Effective from -60°F to 250°F.
Freeze and Burst Protection: Down to -60°F and below -73°C respectively.
Corrosion Inhibition: Contains inhibitors to protect against metal corrosion.
Food Grade Safety: FDA and USDA-compliant ingredients are suitable for incidental food contact.
Non-Toxicity: Low acute oral toxicity, safer than ethylene glycol.
Ease of Use: Pre-diluted for immediate application.
Appearance: Colorless, water-white solution.
Industry Standard: Widely accepted in various industrial applications.
Economic Benefits: Reduces long-term costs due to longevity and maintenance ease.
This is the Press Piston Assembly for the Blichmann WineEasy Fermentor. You will need one Piston Assembly for each different size WineEasy Fermentor you have, and if you have multiple WineEasy Fermentors of the same size, you will only need one Piston Assembly to press all of them!
Please Note: This 55 gallon Wine Easy requires at least 18.15 gallons of must to press effectively.
Using the WineEasy™ combined fermentor and press is admittedly different than anything on the market, but is incredibly easy to use and provides results and ease of use that traditional fermenting and pressing techniques simply can't offer.
At the heart of the system is a high quality stainless primary fermentor (20, 30 and 55 gal sizes). A uniquely designed false bottom located at the bottom of the fermentor allows the pomace to be separated from the wine while draining the unit. The tines on the pressure plate support the bottom of the fermentor and perforated false bottom and keep it from collapsing from the pressure imparted by the vacuum pump.
After alcoholic fermentation, the free run is drained or pumped out of the fermentor. The sliding piston assembly is then installed. The vacuum pump evacuates the carboy (or other vacuum capable vessel) and applies a vacuum under the false bottom of the WineEasy fermentor. This causes atmospheric pressure to push down on the sliding piston pressing the pomace to the ideal maximum pressure of 14 PSI to avoid hard press conditions.
Since this is all done without transferring the pomace to a press, and is done so in a completely closed and air tight system, oxidation and contamination are virtually eliminated.
Cleanup is as easy as scooping out the dry pomace into a container and washing out the high polish stainless steel fermentor!
Features:
No messy transfers to a secondary fermentor
Less risk of contamination and oxidation
Great press efficiency
Fast
Easy to use
Simple mess-free cleanup
Produce consistently superb wines
Please Note: This 20 gallon Wine Easy requires at least 6.6 gallons of must to press effectively.
This new Blichmann Engineering innovation redefines electric heating! Unrivaled performance, speed, and simplicity. Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker™ brew pot. It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template. We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end. Hot, fast, and easy. Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates. Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot! Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling The BoilCoil™ includes a "plug and play" 12 ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!). Simple installation requires drilling only two small 5/8" holes with our handy drill template. No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles. The BoilCoil™ will fit in most competitive pots too! See data tab for dimensional drawing. Couple with our new electric TOWER of POWER™ controller for the ultimate in temperature control. Visit our TOWER of POWER™ page for more detail! Kettle Size: For 30 gal Boilermakers™ Rated Voltage (VAC): 240 v Recommended GFCI Breaker Size: 30 amp Power (W): 5750 W
These are Leg Extensions for use with the 20 and 30 gallon Blichmann WineEasy Fermentors. These will allow you to gravity drain your Fermentor into carboys or other vessels. These legs are not for use with the 55 gallon unit, as it is too large to be safely supported by the legs.
Please Note: The Vacuum Pump Kit, which you will need for pressing, will allow you to transfer out of the WineEasy regardless of height via the vacuum created.
A CLEAN KEG IS A HAPPY KEG. Move through your cleaning days more smoothly and efficiently with our Pro Keg Washer. It includes a corrosion-free stainless steel frame, heavy-duty wheels, and automatic preset cycles, along with these other features:
Compact design
4-minute wash cycle
Throughput of 13 kegs per hour
Cleans and sanitizes 1/2 BBL and 1/6 BBL kegs
42″ H x 49″ L x 19″ W
Intuitive switches to adjust lengths of the sub-cycles: Long Rinse/Long Wash, Long Sani, Long Purge, Supplemental Air Option or other compressed gas purge to save on CO2
Prime the pump with the push of a button
Purge button to purge out any beer left over before the wash
Heated chemical cleaner tank (caustic/acid)
Semi-automatic operation
The Aromanator™ Reducer Kit helps maintain an oxygen-free environment during fermentation when switching between the Aromanator™, a blow-off tube, or an airlock. This kit makes it easy to swap attachments without exposing your fermenting wort to oxygen, preserving the aroma and quality of your brew. It’s an essential tool for brewers who want precise control over fermentation conditions and flavor retention.
Looking for an oxygen-free counter-pressure keg filler? The Venty™ is the perfect addition for oxygen-free transfers! Just attach the Venty™, purge your keg, set the Venty™ pressure, and fill! It’s that simple!
Precise Pressure Control
Fits Standard Ball Lock with 1/4″ Male Flare
Simple Tool-Free Installation
Stainless Construction
The maximum operating pressure of the Venty™ is 45 PSI.
Looking for a way to add your hops to your fermenter without adding unwanted oxygen? The Aromanator™ is your solution. Use this accessory to dry hop through any 1.5” tri-clamp port. Comes with a keg post to purge oxygen from the Aromanator™ and a 2” butterfly valve to seal your wort before hop addition.
Allows for full purge of hops from the bottom up for true oxygen-free dry-hopping. Oxygen can cause off-flavors in beer, and this can help eliminate them! Easy to assemble with sanitary tri-clamp connections. Quick to assemble and easy to clean! A clear cap ensures visibility to see that every hop pellet has fallen. Robust purge valve with integrated open valve detent for easy operation and safety! 2” sanitary butterfly valve allows passage of large hop pellets! An optional reducer can be installed to use other attachments during fermentation, meaning you can use any 1.5” TC attachment you want on your fermenter! Connects to any 1.5” or 2” tri-clamp port on your fermenter!
Includes:
Aromanator™ Body
Aromanator™ Lid Pressure Relief Valve and Nut
2” TC Butterfly Valve
2” to 1.5” Tri-Clamp Adapter
(2) 2” Tri-Clamp
(2) 2” TC Gasket
3” Tri-Clamp
3” TC Gasket Gas Ball Lock Post
Optional Reducer Kit
The optional reducer kit includes an extra 2” to 1.5” tri-clamp adapter, a 2” tri-clamp, and a 2” TC gasket. It can be used to prevent oxygen from entering the fermenter when changing attachments on the top of your fermenter.
This new Blichmann Engineering innovation redefines electric heating! Unrivaled performance, speed, and simplicity. Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker™ brew pot. It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template. We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end. Hot, fast, and easy. Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates. Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot! Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling The BoilCoil™ includes a "plug and play" 12 ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!). Simple installation requires drilling only two small 5/8" holes with our handy drill template. No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles. The BoilCoil™ will fit in most competitive pots too! See data tab for dimensional drawing. Couple with the electric BrewCommander™ controller for the ultimate in temperature control. Kettle Size: For 10 gal Boilermakers™ Rated Voltage (VAC): 240 v Recommended GFCI Breaker Size: 20/30 amp Power (W): 3750 W
The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.
Adjustable from 0.3–14.5 psi, designed for the X3
Made from 304 stainless steel
11.75" H x 4" Ø
For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
The connectivity package required to connect the Blichmann BeerGun Bottle Filler to your ball lock keg and CO2 setup. You will also need to split your gas tubing using a Stainless Steel Flare Tee.
These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs!
