New Products Check out what's hot & new
BECOME A VIP Join the VIP text list
Detecting your location...
FREE FERMZILLA with every BrewZilla Gen 4.1 Dads & Grads · Ends in 7 days · No code needed
Shop the Bundle
Best Sellers - Last 30 Days

BrewZilla | DigiBoil | Adjustable Lid Clamps | Stainless Steel | Set of 4

    Description

    • Adjust clamp tension as needed for a better seal with metal BrewZilla or DigiBoil accessories
    • If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension
    • Easily spin to adjust clamp height and then tighten hex nuts to lock in adjustment
    • Compatible with 35L / 65L BrewZillas and DigiBoils
    • Made from 304 Stainless Steel

    Get the exact tension you need with your BrewZilla or DigiBoil with KegLand's Stainless Steel Adjustable Clamp Set. Permanently replace the standard lid clamps and adjust the tension to your needs. These clamps are only intended for use with the metal Distillation Lid or Boiler Extension Kits. If you are having trouble getting the correct tension to form a good seal with those accessories, these adjustable clamps can help you dial in the fit. They should never be used with the standard glass lid.

    Compatible with 35L and 65L BrewZillas (Gen 3 / Gen 4), DigiBoils (Gen 1 / Gen 2), and Boiler Extensions.

    Installation Instructions:

    1. You will need a pair of bolt cutters or tin snips to cut the standard clamp off. (Please see product photos for optimum cut location).
    2. Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will be blocked by the round lip of the boiler.
    3. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter.

    Warning: Do not use the adjustable clamps with a glass lid, the clamps are only designed for distillation lids or other metal accessories.

    Please note: The adjustable clamps will eventually phase out the standard lid clamps on all Gen 4 BrewZillas. They are not necessary when brewing with the standard glass lid. You should only swap to the adjustable clamps if you are using the metal distillation lid or boiler extensions and are having issues with getting the correct tension when using those accessories.

    KegLand Part Number: KL30649

    BrewZilla | DigiBoil | Adjustable Lid Clamps | Stainless Steel | Set of 4

      Product form

      SKU: AG557

      $13.49

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Description

        • Adjust clamp tension as needed for a better seal with metal BrewZilla or DigiBoil accessories
        • If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension
        • Easily spin to adjust clamp height and then tighten hex nuts to lock in adjustment
        • Compatible with 35L / 65L BrewZillas and DigiBoils
        • Made from 304 Stainless Steel

        Get the exact tension you need with your BrewZilla or DigiBoil with KegLand's Stainless Steel Adjustable Clamp Set. Permanently replace the standard lid clamps and adjust the tension to your needs. These clamps are only intended for use with the metal Distillation Lid or Boiler Extension Kits. If you are having trouble getting the correct tension to form a good seal with those accessories, these adjustable clamps can help you dial in the fit. They should never be used with the standard glass lid.

        Compatible with 35L and 65L BrewZillas (Gen 3 / Gen 4), DigiBoils (Gen 1 / Gen 2), and Boiler Extensions.

        Installation Instructions:

        1. You will need a pair of bolt cutters or tin snips to cut the standard clamp off. (Please see product photos for optimum cut location).
        2. Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will be blocked by the round lip of the boiler.
        3. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter.

        Warning: Do not use the adjustable clamps with a glass lid, the clamps are only designed for distillation lids or other metal accessories.

        Please note: The adjustable clamps will eventually phase out the standard lid clamps on all Gen 4 BrewZillas. They are not necessary when brewing with the standard glass lid. You should only swap to the adjustable clamps if you are using the metal distillation lid or boiler extensions and are having issues with getting the correct tension when using those accessories.

        KegLand Part Number: KL30649

        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 0.3 lb

        You Might Also Need

        Boiler Extension Kit | BrewZilla | DigiBoil | 65L | 17.1G
        Boiler Extension Kit | BrewZilla | DigiBoil | 65L | 17.1G
        $65.99
        Boiler Extension Kit | BrewZilla | DigiBoil | 35L | 9.25G
        Boiler Extension Kit | BrewZilla | DigiBoil | 35L | 9.25G
        $54.99
        Steam Condenser Set | 2 in. T.C. | BrewZilla | DigiBoil
        Steam Condenser Set | 2 in. T.C. | BrewZilla | DigiBoil
        $186.99
        Pro Sight Glass Distillation Lid | Steam Condenser Lid | BrewZilla | DigiBoil | 35L
        Pro Sight Glass Distillation Lid | Steam Condenser Lid | BrewZilla | DigiBoil | 35L
        $140.24
        Pro Sight Glass Distillation Lid | Steam Condenser Lid | BrewZilla | DigiBoil | 65L
        Pro Sight Glass Distillation Lid | Steam Condenser Lid | BrewZilla | DigiBoil | 65L
        $219.99
        Distillation Lid for 35L BrewZilla / DigiBoil | 6mm Gasket
        Distillation Lid for 35L BrewZilla / DigiBoil | 6mm Gasket
        $38.49

        Login

        Forgot your password?

        Don't have an account yet?
        Create account