Stainless steel 1/4 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1106 or KEG1107). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
Silicone regulator stem o-ring. Commonly used on Taprite regulators which have an o-ring located where the regulator stem mates with the CO2 cylinder. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.
Stainless steel shank comes with a back nut, plastic collar, and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple
These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
Instant Identification: Color-coded (Red for Gas, Yellow for Beverage) for quick post recognition.
Universal Compatibility: Fits both ball lock and pin lock homebrew keg posts.
Secure Seal: Made from silicone for superb malleability and spring back memory performance.
Universal keg post O-rings can be used with both ball lock and pin lock homebrew kegs. These O-rings go on the outside of your homebrew keg posts (also referred to as body connects) which is where you connect your ball lock or pinlock quick disconnects. Use Red for Gas-In and Yellow for Bev-Out to quickly and easily identify your posts.
1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form a seal. See below for EPDM, Silicone, and Vinyl options.
Female Beer Thread (5/8" BSP)
5/8" top port opening
Comes in a convenient zip lock bag.
Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower with matte black finish
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
15.75 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Replacement o-ring for Universal Poppets. The poppet is the piece inside a ball lock or pin lock keg post that interfaces with homebrew keg quick disconnects.
Comes in a convenient zip lock bag.
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV.
This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect.
Comes in a convenient zip lock bag.
Connect draft tubing to your keg coupler or faucet shank. Recommended for 3/16" or 1/4" ID draft lines. Tailpiece and hex nut are made of stainless steel.
This dual sided screw has one side which goes into a Faucet Tap Ferrule and the other is a wood screw to go into a wooden tap handle. Perfect for creating your own custom handles. 5/16-18 thread.
Comes in a convenient zip lock bag.
Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
4-1/4" - Total Length (Tip to Tip)
3-1/2" - Shank Length (Without Nipple)
2-5/8" - Thread Length
2-3/8" - Pass Through Length
3/16'' - Bore
Replacement internal o-ring gasket for ball lock or pin lock quick disconnects. This flat washer fits inside the body of the QD when you unscrew the top port.
Comes in a convenient zip lock bag.
Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects.
Comes in a convenient zip lock bag.
A great item to keep on hand just in case. The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. These washers can wear down over time and need replacing, so we always recommend having a spare or two ready to go so you're not left high and dry when the original washer breaks down.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
Replacement gaskets and o-rings for standard US keg couplers (D-Style) and European keg couplers (S-Style). Other than the probe washer, they use the same gaskets and check valves.
Replace a missing or damaged gas-in check valve on your Sanke Coupler. This one way gas bladder prevents beer from back-flowing up your gas line and into your regulator where it could cause damage.
Comes in a convenient zip lock bag.
Bev Out ball lock quick disconnect with 1/4 in. flare connection. Flare fitting barbs come in multiple sizes so you can choose the draft tubing size that best suits your needs. Features a built-in washer so you will not need a separate nylon washer.
Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 1/4" or 5/16" ID gas line.
Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel with black resin coating
Designed to fit KOMOS Premium Regulators (D1077 & D1175) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Dual Gauge Regulators (D1077 & D1175) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 and D1175 Premium model KOMOS regulators. It is not compatible with Universal model KOMOS regulators D1170 and D1171.
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 5/16 in. tailpiece is commonly used with 1/4 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel for longevity
Designed to fit KOMOS Premium Regulator (D1077) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Premium CO2 Regulator (D1077) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 model KOMOS regulator. It is not compatible with models D1170, D1171, D1175.
Adapt 1/4" male pipe thread to 1/4" male flare thread, making any 1/4" FPT fitting compatible with flare fittings or flare threaded Duotight fittings.
Made from chrome plated brass.
The last faucet wrench you'll ever own! The KOMOS Draft Wrench is a professional 7 function draft tool built for a lifetime of adjusting everything from your regulator and draft shanks to your keg coupler and hose clamps. You will appreciate the quality, compared to cheaper stamped draft wrenches, everytime you use it. The KOMOS Draft Wrench is laser cut from 12-gauge 304 Stainless Steel and hand finished. Designed by a draft tech with professional draft techs in mind.
With all of its different functions, the Pro Draft Wrench is sure to save you many back-and-forth trips to the toolbox. However, we suggest a traditional Crescent wrench for loosening over tightened regulator to tank connections. The KOMOS wrench is great for general purpose, but a Crescent wrench is suggested when extra torque is needed.
Features:
Pin Wrench
Screwdriver
Regulator Adjuster Nut Wrench
Keg Tap Probe Wrench
Shank Coupler Nut Wrench
Shank Lock Nut Wrench
Regulator Wrench
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver.
Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.).
Comes in a convenient zip lock bag.
Universal Poppets can be used with both ball lock and pin lock homebrew kegs. Poppets are one of the critical parts that makes the keg function, so it's always a good idea to have spares on hand. This 10-pack of Universal Poppets represents a great value for brewers buying in bulk.
Comes in a convenient zip lock bag.
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle.
5/16" top threads and 3/8" bottom threads.
Pack of 5. Comes in a convenient zip lock bag.
The KOMOS shank wrench is designed to tighten the nut on the back of a faucet shank. It is double offset for clearance inside of coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Also super handy when tightening shanks inside a cold box when space is at a premium and it hard to fit a traditional wrench. Pubs have historically made their own, now you can get one the easy way.
Laser Cut from 12 guage 304 Stainless Steel. Offset 3/4" on each end to fit around insulation or inside of small towers.
Features:
1-1/16" 12 Point Wrench
1-1/8" 12 Point Wrench
Made from 304 Stainless Steel
