Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring the hottest homebrew keg around—the all-stainless, stackable Torpedo Keg
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Standard Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
This stainless pressure relief valve offers precise control and easy to adjust. The elongated body provides room for a taller spring to make small adjustments more accurate. Tune in the pressure setting from 0 to 30 psi using the knurled adjustment knob. 1/4" male pipe thread.
This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines.
Comes in a convenient zip lock bag.
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
Swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
Stainless steel 5/16 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1110). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
Gas In ball lock quick disconnect with 1/4 in. barb connection. Recommended for use with 3/16 in. ID tubing for a tight fit.
Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard Beer Thread (5/8" BSP) which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful.
The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings.
Made from 304 stainless steel.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring a brand-new ball lock corny keg with rubber booted bottom and top handles
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 2.5 or 5 gallon Ball Lock Corny Keg. These brand-new kegs are made in the style of the iconic Cornelius homebrew keg with rubber base and molded rubber handles at the top. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Ball Lock Corny Keg (2.5 or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used with 3/16 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
Swivel nut for 1/4 in. flare fitting connections. For use with 5/16 in. barbs (KEG1109). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock.
Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
The KOMOS stainless S-Style coupler is built for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. Featuring stainless steel body and stainless steel probe, this keg tap is made to last. The coupler comes without fittings so it can be adapted however you sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port.
Both gas-in and bev-out ports come bare so you can fit it out exactly how you want it. Maybe you like a larger gas line and smaller beer line—no problem. Or perhaps you're ready to take your draft system into the 21st century with EVABarrier draft tubing and Duotight push-to-connect fittings. Whatever floats your boat, keep your draft setup anchored with the KOMOS keg coupler.
The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a higher or lower pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.
These 5/8" Vinyl gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS S-style coupler for European kegs can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
5-gallon Ball Lock Keg made from beverage-grade 304 stainless steel.
Ideal for beer, cider, kombucha, cold-brew coffee or any other beverage you want to serve on draft.
Single steel handle provides easy mobility while keeping the in & out posts clear for connection.
Rubber boot bottom won't scratch up the floor of your kitchen or home bar area.
Manufactured in an ISO 9001-certified facility with robotically welded seams for superior quality.
The KOMOS Homebrew keg is the perfect option for beer, cold brew coffee, kombucha, cider, or any other beverage you want to serve your home bar patrons on draft. These ball lock kegs are built in an ISO 9001-certified facility and made from beverage-grade 304 stainless steel with robotically welded seams. The single steel handle is positioned away from the ball lock posts, so you'll never have trouble connecting or routing your draft lines. The rubber boot bottom allows you to move your kegs around without fear of scratching up your floors, which is especially nice if your kegerator setup is on hardwood floors, and they can be stacked on top of other homebrew kegs with a rubber top. Comes with a standard corny keg lid with pull ring PRV, providing both manual and automatic pressure relief.
Specifications:
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
Single Ergonomic Steel Handle
Rubber Boot Bottom
ISO9001 Quality Assurance
NSF Approved
Made from 304 Stainless Steel
25.25" H x 8.75" D
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 3/16" or 1/4" ID gas line.
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS coupler can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
