Everything On Sale!

Conveniently move your fermentation tanks / eggs around your facility with this Molded Rolling Base.  This unit is designed to work with Speidel 240 l Tanks (BRAU710) as well as the 250 l Fermentegg (FE760).  High quality casters allow for easy relocation of tank as necessary for cleaning / general brewery work. Adds a bit over 6.25 inches to the height of your vessel.

Read more less

This temperature and defrost controller is required when using a Kreyer defrost kit. The temperature control unit controls room/cooler/cave/cellar temperature when used in conjunction with a Kreyer fan unit.  Kreyer fan units are plumbed to a Kreyer Glycol cooling unit.  This unit turns on and off an optional solenoid placed at the inlet of the fan unit, which allows chilled glycol to enter the coils on the fan unit, while also turning on the fan(s) that blow cold air out into the room. When using a Kreyer Fan unit for below freezing temperatures, you must also use their matching defrost kit. Kreyer Defrost Kits consist of an electric heating element or spiral and are fitted directly to their respective fan unit cooling fins. The Defrost Kit melts any iced condensate that can accumulate on the fins when the fan is used with Glycol-Water set below the freezing point. The Defrost Kit will periodically melt any iced condensate allowing you to use your fan unit at low temperatures. For use with MR, SD-S, SD Plus, and TA Kreyer Fan Units. For a fan unit temperature controller to be used above freezing temperatures, see our GLY980.

Read more less

G-Type keg coupler for Anchor Steam and some other European kegs Pull-to-engage ergo lever handle Includes 3/8" OD barb for gas inlet Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs. Will also fit: Abbot Ale Anchor Liberty Ale Anchor Porter Anchor Steam Bass Pale Ale Blackthorne Cider Caffrey's Fuller's ESB Fuller's London Pride Grolsch Old Speckeled Hen Rouge Scottish Tennents Sir Perry William's Watney's Young's Young's Chocolate Stout Young's Oatmeal Stout Young's Ram Rod Bitter Young's Special London Ale

Read more less

Think Stave Segments, evolved.  The BeerStix Domininos are 1 1/2" square segments of oak, milled to give you quick extraction, and full flavor.  While similar to conventional stave segments, you will see similar results in a much shorter timeframe, making these much more suitable for beer.  This is a 490 g (1 lb) bag of French Oak Domininos, Toasted Medium Plus and sized to oak 100 gallons of Beer.  This is the quickest turnaround on a Beer Stix product.  At one month extraction, you'll see a quick integration of rich oak character due to the high surface area of these domininos in contact with your beer. Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Domininos will provide a round and rich oak character specific to the toast level and origin.  French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate.  Different beer styles will accentuate or mask different flavors from the oak, so expect some variation! Features: Oak Origin - France, Allier Region Toast Level - Medium Plus Oak Form - Domininos, 490 gram Volume Treated - 100 Gal Beer Extraction Time - 1 Month (see note below) Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness Please Note - Allow 1 month minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.

Read more less

Imported grape picking bucket from Italy with a sturdy handle.  Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out! *Basket color may vary

Read more less

Who doesn't like a faster brew day? Help your 50L Braumeister get up to strike temp and to a boil faster; and use less energy to maintain the boil with this neoprene sleeve from Speidel. Fits both new models as well as pre-2015 models.

Read more less

Replacement motor for the motorized destemmer WE235 & WE236.

Read more less

Beerstix 8 piece Barrel Tethers are a great new means of imparting high quality Oak flavor to your beer.  These tethers are designed to fit through the bung hole of a barrel, and sized to treat 59 gallons of beer (for smaller volumes, or less oak impact, simply cut off sections as necessary).  Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Tethers will provide a round and rich oak character specific to the toast level and origin.  French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate.  Different beer styles will accentuate or mask different flavors from the oak, so expect some variation! The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time.  The Beer Stix are also milled thinner than the Wine Stix, allowing for denser toasting. Features: Oak Origin - France, Allier Region Toast Level - Medium Plus Oak Form - Barrel Tether (8 Piece) Volume Treated - 59 Gal Beer Extraction Time - 2 Months (see note below) Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.

Read more less

Replacement Non-Return Kit for Kreyer Chilly Max glcyol chillers. This kit comes standard on the Chilly Max 50 and Max 90. If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves at all of your tanks are closed and the chiller's pump turns off. This Non-Return kit works with all Kreyer ChillyMax chillers to prevent this situation. The kit includes a one-way check valve which is installed inline on the chiller's outlet, and an electric solenoid valve installed on the chiller's inlet. The solenoid valve is wired to the relay that controls the chiller's pump such that when the pump turns off the valve closes. Simple to install and completely automatic, this kit allows you to keep the chiller's reservoir full and not worry about the placement in relation to the rest of your glycol system. Note: This only works with Chilly Max units.  It will not work with any other chillers such as the Chilly 45. For the Chilly 45 Non-Return Kit, click here.

Read more less

Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 4 non-locking wheels. Compatible with Double-Wide model. For Standard and Deluxe models, see here. Includes 2x locking wheels and 4x non-locking.   NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.

Read more less

Imported grape picking bucket from Italy with a sturdy handle.  Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out! *Basket color may vary

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! Over 20% extra headspace with a working volume of 5 bbl and max volume of 6.25 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 73" Tank Diameter: 42" Empty Weight: 551 lbs Working Volume: 5 bbl Total Volume: 6.25 bbl Jacket Surface Area: 2,629 in² (1.696 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves at all of your tanks are closed and the chiller's pump turns off. This Non-Return kit works with Kreyer Chilly chillers (25, 35, 45) to prevent this situation. The kit includes a one-way check valve which is installed inline on the chiller's outlet, and an electric solenoid valve installed on the chiller's inlet. The solenoid valve is wired to the relay that controls the chiller's pump such that when the pump turns off the valve closes. Simple to install and completely automatic, this kit allows you to keep the chiller's reservoir full and not worry about the placement in relation to the rest of your glycol system.

Read more less

MoreBeer! is proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of beer. Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Conical tanks come standard with legs. Also this tank specifically is made to handle up to 1.2 bar (17.4 psi). Key Features Full Jacket - Fermenters are equipped with a jacket that covers all accessible areas of the tank. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY411) for complete temperature control! Included Options - Features 1.5" T.C. outlets (One complete drainage at the bottom of the cone, one in the middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. These are equipped with hardware at the factory, one has a sample valve; the other has a thermowell/thermometer combination.  Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively means cleaning is too easy. Watch the Krausen wash right off! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Thickness - Speidel tanks are on average around 25% thicker than Italian manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - Tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Features Full Volume of 625l (165 gal). Perfect for fermenting single batches on our 500l Braumeister Handles pressures up to 1.2 bar (17.4 psi) - use as a bright tank or unitank! 1.5" T.C. Drain, Racking Port, and Lid outlet. 8.5" Top hatch for easy cleaning and additions. 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Dimensions: 32.25" D x 85" H (820mm D x 1661mm H)   Please note: this tank does not include the 1.5" TC Tee with pressure gauge and valve pictured in the top right of the product photo. See our CONP775 listed below under "You Might Also Need".

Read more less

WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast French Oak Tank Staves from the Allier forest, and depending on the wine, will impart flavors of dark coffee, some carmelized sweetness, and a roasty smokey character that will compliment big blockbuster varietals. The French Oak Tank Staves are sized to provide New Barrel flavor to a 60 gallon lot of wine. Doing more than 60 gallons? Simply toss in another stave! Another advantage of the WineStix over traditional staves is that these will not stick together like flat staves would, the cross-hatch pattern will result in consistent extraction throughout the life of these. These can also be cut down if necessary to dose a smaller batch of wine.   4" W x 37" Long

Read more less

Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs.  Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards.  Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)  

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! Over 15% extra headspace with a working volume of 30 bbl and max volume of 35 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include:   15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports 2x PT100 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 112" Tank Diameter: 69" Empty Weight: 1,367 lbs Working Volume: 30 bbl Total Volume: 35 bbl Jacket Surface Area: 9,849 in² (6.354 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

WineStix Segments are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These WineStix Segments feature a Toast Blend of 40% Medium, 40% Medium Plus and 20% Dark toasted stave. One 1 lb/490 grams treats approximately 100 gallons of wine. Due to careful aging and seasoning of the American Oak and a precise toasting, WineStix offer specific flavors and aromas that add character to your wine! Please Note: Allow 2 months extraction time to balance the extractions of short and long grain. This is our fastest extraction. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the WineStix® milling. The end result is in likeness to a second use Barrel.

Read more less

Set of Body Seal and Mechanical Seal needed to completely rebuild the pump head. We recommend changing these out at the same time you change your impeller (PMP200A).

Read more less

A spare / replacement impeller for our PMP200 (orange) Chunky Pump. Does not fit pumps from other suppliers.

Read more less

The HI1048B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna's Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. This pH electrode is ideal for wine must and juice due to their high solids content that would clog a standard general purpose pH electrode. Clogging Prevention System (CPS™) Technology Refillable Electrode Double Junction Design Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.   The HI1048B uses general purpose (GP) glass, spherical bulb, glass body, sleeve junction with CPS™ technology, double junction and is refillable with 3.5M KCl, making it ideal for wine must, juice, and other samples with a high solids content.   General Purpose Glass Formulation General Purpose (GP) glass, as the name implies, is a standard glass formulation that is used for general use. A pH electrode with GP glass will have a resistance of 100 megaohms at 25°C and is suited for measuring the pH of samples that are at ambient temperatures. The HI1048B is suitable to use with samples that measure from 0 to 80°C.   Spherical Glass Tip The spherical shaped tip design allows for a wide area of contact with the measured sample. This permits a faster electrode response with a higher degree of stability.   CPS Sleeve Junction Clogging Prevention System (CPS) technology is an innovation in for the improvement of pH measurements in samples that have a high solids content. Conventional pH electrodes use ceramic junctions that can clog quickly when used in samples that have a high solids content such as wine must or juice. When the junction is clogged, the electrode does not function. CPS technology utilizes the porousness of ground glass coupled with a PTFE sleeve to prevent clogging of the junction. The ground glass allows the proper flow of the liquid, while the PTFE sleeve repels solids. As a result, pH electrodes with CPS technology take up to 20 times longer to be fouled as compared to conventional electrodes.   Double Junction Reference A double junction electrode has an internal compartment surrounding the reference wire. Silver ions are present in the electrolyte of the internal compartment, which houses the Ag/AgCl reference wire; the electrolyte outside this compartment is silver free. The double junction design means that virtually no silver from the electrode enters the sample. This design allows measurement in applications where silver ions in the sample are undesirable or for samples that contain sulfides that can cause the silver to precipitates and clog the junction. The clogging of the junction will result in drifty and erratic readings.   Refillable The HI1048B is a refillable probe. Since it is a double junction pH electrode, the fill solution is the HI7082 3.5M KCl. This solution does not contain any silver as with single junction electrode fill solutions.   Glass Electrode Body The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the equilibrium the steadier the reference potential.   BNC Connector The HI1048B has a BNC connector. This type of connector is universal in that it can be used on any pH meter that has a female BNC probe input. Other types of connectors include DIN, screw type, T-type, and 3.5mm to name a few. These types of connectors tend to be proprietary for a particular type of meter and are not interchangeable.   Single Junction Versus Double Junction pH Electrodes Conventional electrodes are normally single junction. As depicted by the figure above, these electrodes have only a single junction between the internal reference wire and the external solution. Under adverse conditions, such as high pressure, high temperature, highly acidic or alkaline solutions, the positive flow of the electrolyte through the junction is often reversed resulting in the ingress of sample solution into the reference compartment. If this is left unchecked, the reference electrode can become contaminated, leading to complete electrode failure. Another potential problem with single junction electrodes is the clogging of the junction due to silver chloride (AgCl) precipitation. Silver can be easily precipitate in samples that contain Tris buffer or heavy metals. When the electrolyte solution makes contact with the sample, some AgCl will precipitate on the external face of the junction. The result is drifty readings obtained from the sensor.   Hanna’s double junction system, as the name implies, has two junctions, only one of which is in contact with the sample as shown in the figure. Under adverse conditions, the same tendency of sample ingress is evident. However, as the reference electrode system is separated physically from the intermediate electrolyte area, the contamination of the electrode is minimized. The likelihood of clogging of the junction is also reduced with a double junction electrode since the outer reference cell uses a fill solution that is “silver-free”. Since there is no silver present, there is no precipitate forming to clog the junction. Able to measure samples 0 - 80C Glass body, refillable sleeve junction PH electrode with a BNC connector Features a double junction reference with Hanna's Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass Ideal for wine must and juice due to high solid content that would clog a standard general purpose PH Electrode  

Read more less

Bleeder/Regulator valve from the WE399 kit. Sold individually for those who need a replacement part or are planning to build their own version of our WE399 kit. Note: The inlet is noted with a molded text "CO2" next to the barb fitting. Relevant Specifications Max Inlet Pressure: 10 psi Inlet/Outlet Size: 3/8 in Construction Material: Food Grade rubber and plastic.

Read more less