Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL11952
Designed to be used with a recessed countertop drip tray, but you can add this bulkhead to virtually any drip tray you'd like to gravity feed spills into a bucket or drain.
KegLand Part Number: KL12577
Stainless steel 6" drip trap. Louvered drip screen is removable. This drip tray, as opposed to the other models we manufacture, is imported. While the quality is good the finish of the stainless is not on the same level of craftsmanship. Buy this unit for price and perfect functionality.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
Never lose a drop with this wrap around drip tray that hugs the tower to catch all of those stray drops. Fits all of the towers we sell! Made from stainless steel.
Dimensions: 7 in wide x 12 in long x 0.75 in deep (up to 4.33 in tower diameter)
Kegland Part number: KL01427
U-Type keg coupler for Guinness and some other Euorpean beer kegs
Stainless steel keg probe and coupler body
Pull-style lever handle
Includes 3/8" OD barb for gas inlet
A special tap that is required for Guinness kegs. U-Type Tap. Also known as a keg coupler, coupling, or adapter.
Will Usually Fit:
Abby White
Boddingtons Pub Ale
Guinness Stout
Harp
Kilkenny
Leffe
Magners
Smithwicks Ale
Compact Design: Ideal for tight spaces inside small refrigerators or keezers.
Versatile Routing: Use any port as the inlet to feed the remaining three outputs.
Easy Expansion: Pair with DUO102 plugs to customize the number of active lines.
The Duotight Cross Adapter works perfectly as a simple option for splitting gas lines. Insert your gas line to any of the 8mm Duotight connectors and route outgoing gas lines from the remaining three. If you do not need to use all three outgoing gas lines, simply plug the unused ends with a DUO102 8mm Plug.
High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage.
The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market.
EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free.
No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
KegLand Part Numbers: KL46251
Make a single outlet regulator into a dual outlet reguator with this Y-fitting. Remove the shutoff from a regulator, add thread tape and screw the y fitting in tightly, then thread in two regulator outlet valves, D1120. You can now shut off 2 gas lines independently from one another to protect from leaks and cross contamination. 1/4MPT x 1/4FPT x 1/4FPT
This is a large rubber washer for use on beer shanks and jockey box shanks. These will help to create a seal around the hole that your faucet shank goes through.
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Easily dispense both chilled and carbonated water from a single, elegant tap, making it a perfect match for any under-counter filtration or carbonation system
The tap is designed to work seamlessly with various setups, including keg-based systems for chilled or sparkling water and compact under-counter units like the Benchy Sparkling
Made from high-quality stainless steel, this tap is built to last and provides a clean, modern aesthetic that complements any kitchen or bar counter
This dual-outlet stainless steel tap is perfect for dispensing cold filtered water, sparkling water, or ambient temperature water. It's a great choice for systems like the Benchy Sparkling or other filtered water and reverse osmosis (RO) setups.
This tap is an ideal component for a variety of filtered water systems. We offer it specifically for customers who want to dispense chilled or chilled and carbonated water.
Here are a few ways to use this tap to get chilled or sparkling water:
For chilled water, simply place a ball lock keg in your fridge, run your mains water supply through the keg, and then into this tap.
For chilled and sparkling water, you can use a carbonation reactor lid with a keg. This option lets you chill and carbonate water at the same time.
For a complete under-counter solution, the Benchy Sparkling unit is an excellent choice. You can connect your mains water supply to this compact unit, and it will deliver chilled and carbonated water directly to this tap.
Fits benches/counters up to 1.96" (50mm) thick.
Includes 2 x Duotight 6.35mm push in fittings as standard for connecting to 4mm x 6.35mm PE Water Line.
If you are using this with a Benchy Sparkling you will need to step the line up to 8mm. We would recommend this fitting down the line. (Do not attach to the barbs of the tap, they are too wide to fit without leaking.)
KegLand Part Number: KL23917
Protect your gas regulator from liquid damage!
Insert in a gas line and you will be able to shut off gas flow anytime. Has internal check flow valve that prevents liquid from traveling past, even when the ball valve is open. Not only handy, it is a regulator saver.
Has 5/16" barbs for easy installation on gas lines.
The KOMOS shank wrench is designed to tighten the nut on the back of a faucet shank. It is double offset for clearance inside of coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Also super handy when tightening shanks inside a cold box when space is at a premium and it hard to fit a traditional wrench. Pubs have historically made their own, now you can get one the easy way.
Laser Cut from 12 guage 304 Stainless Steel. Offset 3/4" on each end to fit around insulation or inside of small towers.
Features:
1-1/16" 12 Point Wrench
1-1/8" 12 Point Wrench
Made from 304 Stainless Steel
Simply unscrew the normal spout on a NukaTap or Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Matches perfectly with the NukaTap Stealth Bomber faucet! For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Stainless steel construction with matte black finish. Kegland Part number: KL21135
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through
Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
This is a stainless steel shank with chrome plated brass hex nuts.
Dimensions:
4" - Shank Length
4" - Thread Length
2-3/4" - Pass Through Length
Max length with hex nuts at either end
Does not account for nuts/nipples you may install
Male Beer Thread (5/8" BSP)
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
1/4” MPT Right-hand thread.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How does one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
If your Taprite Regulator is drifting or losing pressure, why not try repairing it rather than replacing? Over time the internal diaphragm can wear out resulting in drifting pressure or a slow leak through the regulator body Refurb your unit with this Regulator Rebuild Kit and return your Taprite regulator to it’s lost glory.
Works with Taprite CO2 or N2 regulators. Not intended for other regulators.
Taprite Part Number: 7740-19-SP
The famous forward-sealing Perlick beer faucet, with integrated Flow Control valve and Push-Back Creamer!
Use the flow control feature to reduce unwanted foaming during the length of the pour, then finish it off with the push-back creamer to top off the beer with the perfect amount of foam. Get ready to start pouring picuture-perfect pints with the Perlick 690SS!
Constructed of 304 stainless steel to last a lifetime.
About Perlick Forward Sealing Beer Faucets:
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.
Please note: In order for the push-back creamer to function properly, you must avoid overtightening the tap ferrule. If you're unable to push-back on the faucet lever, check that there's enough room between the tap ferrule and the friction bonnet and back off the tap ferrule as needed.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid July.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
This stainless steel shank collar mounts on your draft beer shank, behind the beer faucet. Not only does this work to complete the look of your kegerator or keezer, but is a necessary piece for insulating it as well!
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
7-1/8" - Total Length (Tip to Tip)
6" - Shank Length (Without Nut & Barb)
5" - Thread Length
4-1/2" - Pass Through Length
Kegland Part number: KL01120
Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.
D-Type keg coupler for standard American sanke kegs All stainless steel with stainless coupler body and stainless keg probe Click-to-engage ergo lever handle Includes 1/4" OD barbs for gas inlet and liquid outlet This D-Style sanke keg coupler, made from stainless steel, is the most popular beer tap style in the USA. Also known as the American Sankey Coupler, this particular D-Style tap is constructed from heavy duty stainless steel and designed to withstand commercial usage, so you can expect an even longer life span when used for draft beer dispensing at home. Beer is dispensed out of the top port, the side port is for gas. This model comes with a pressure relief valve. Comes with stainless 1/4" beer and gas barbs included for free. For a more economical Sanke Tap (with PRV), see our D1506. This is the default tap used by most American Craft breweries. Here is a partial list of breweries that have been reported to being using American D style kegs.
Abita ACME Alaskan Alexander Keith Anderson Valley Bad Frog BayHawk BBC Black Dog Blanche de Chambly Blue Moon Breckenridge Brooklyn Bruin Pale Ale Budweiser Busch Carlsburg Celis Cider Jack Columbia Brewing Coors Coors Light Corona Deschutes Black Butte Devil Mountain Dos Equis Eel River Brewing Ellicottville E.J. Phair Fat Tire Firehouse Firestone Flying Dog Foster's Full Sail Genesee George Killian's Irish Red Goose Island Gordon Biersch Grant's Green Mountain Cidery Hamms Hard Core Cider Henry Weinhard's High Falls Holy Cow Red Hornsby's Hudson Valley Humboldt Ice House Killarney Killian's Irish Red Kirin Ichiban Kokanee Labatt Blue Leinenkugel Little Kings Lost Coast Lowenbrau (US) Mad River Maudite Miami Trail Brewing Michael Shea's Michelob Mickey's Middle Ages Miller Milwaukee's Best Modelo Molson Canadian Moosehead Natural New Amsterdam New Zeland Steinlager Nor'Wester North Coast O'Doul's Old Milwaukee Old Vienna Pete's Portland Mactarnahan's Amber Portland Oregon Honey Pyramid Razors Edge Red Ale Red Dog Red Hook Red Wolf Rogue Dead Guy Ale Rogue Hazelnut Brown Rogue Red Rolling Rock Sam Adams Saranac Saxer Brewing Schmitt's Shiner Bock Ship Inn Shipyard Sierra Nevada Sleemans Southpaw Spanish Peaks Black Dog Starr Hill Brewery Steinlager Strohs Tecate Thomas Kemper Trois Pistoles Unibroue Wasatch Weinhard's Whitbread Ale Widmer Hefeweizen Woodchuck Dark & Dry Cider Wyder's Yuengling Zebra Kegland Part number: KL06071
Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
Brand new aluminum 10 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 10 lb tank because it holds 10 lbs of compressed (liquified) CO2. 10 lbs of CO2 is enough to dispense about 20x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
20.75" T x 6.875 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Keep your draft faucet in perfect working order!
If the lever gets stuck or is unused for a long time, it can break
Replace it to keep using your favorite tap handle and keep the beer flowing!
With this brass lever you can renew a worn-out part on your well-used draft faucet. This is the actual lever that opens and closes the faucet, and where the tap handle is threaded on. These levers can break if a faucet is left alone for too long and the lever gets stuck.
Comes with a welded 5/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 1-1/4" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
The barb size is rounded to 5/16" OD (0.31"). The true size is 7.5mm (0.29").
Dimensions:
3-1/8" - Total Length (Tip to Tip)
2-1/2" - Shank Length (Without Nipple)
1-1/8" - Thread Length
1-1/4" - Pass Through Length
The last faucet wrench you'll ever own! The KOMOS Draft Wrench is a professional 7 function draft tool built for a lifetime of adjusting everything from your regulator and draft shanks to your keg coupler and hose clamps. You will appreciate the quality, compared to cheaper stamped draft wrenches, everytime you use it. The KOMOS Draft Wrench is laser cut from 12-gauge 304 Stainless Steel and hand finished. Designed by a draft tech with professional draft techs in mind.
With all of its different functions, the Pro Draft Wrench is sure to save you many back-and-forth trips to the toolbox. However, we suggest a traditional Crescent wrench for loosening over tightened regulator to tank connections. The KOMOS wrench is great for general purpose, but a Crescent wrench is suggested when extra torque is needed.
Features:
Pin Wrench
Screwdriver
Regulator Adjuster Nut Wrench
Keg Tap Probe Wrench
Shank Coupler Nut Wrench
Shank Lock Nut Wrench
Regulator Wrench
These stainless short shanks are typically used for attaching faucets to a KOMOS® Cobra style draft tower. The threaded section measures 25mm in length (0.98").
Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
D-Type keg coupler for standard American sanke kegs
All stainless steel with stainless coupler body and stainless keg probe
Pull-to-engage lever handle
Includes 3/8" OD barb for gas inlet
Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
Made in the USA
The D-Style beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the style tap you’ll need.
American-made by Taprite, this coupler is constructed from stainless steel and features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. The 304 stainless body and probe will provide a more reliable life span compared to its nickle-plated counterpart. Features a built-in pressure relief valve for safety.
To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port.
The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
Replacement flow control shuttles for the Gen 2 NukaTap Flow Control faucet. These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. These pieces are backwards compatible with the Gen 1 NukaTap Flow Control model, replacing part numbers 11 and 12 in the diagram image above. KegLand Part Number: KL17817
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through.
Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
This is a stainless steel shank with chrome plated brass hex nuts.
Dimensions:
3" - Shank Length
3" - Thread Length
1-7/8" - Pass Through Length
Max length with hex nuts at either end
Does not account for nuts/nipples you may install
Male Beer Thread (5/8" BSP)
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Right Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
Used to determine level of remaining gas in the tank.
1/4” MPT Right-hand thread fits most regulators.
Easily set different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds! Compatible with both liquid and gas 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). Suitable for applications ranging from 0-150 psi. Since this unit does not have a built-in pressure gauge, it can be used in the full pressure range without ever needing to purchase or swap out the gauge. We recommend using an adjustable relief valve/spunding valve on your keg to set the pressure. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output This regulator is perfect for lowering your mains water pressure for use with the Continuous Soda Carbonator Keg Lid. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts KegLand Part number: KL02172
For the do-it-yourself person, this is the piece that you see at the bottom of most handles, you must also get the D1298B if you want to screw it into a wood tap handle. (5/16" top threads and 3/8" bottom threads)
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 4.5" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 3" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
D-Type keg coupler for standard American sanke kegs Stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style sanke keg beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the keg coupler you’ll need. Made in America by Taprite, this keg coupler features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. It features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
A-Type keg coupler fits most German beer kegs such as Paulaner and Spaten
Click-to-engage ergo lever handle
Includes 1/4" OD barbs for gas inlet and liquid outlet
Barb elbow outlet is ideal for low clearance keg storage and easier line routing
For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD.
This model features a pull-ring pressure relief valve (not pictured).
This Keg Tap Will Usually Fit:
Ayinger
Bitburger Pilsner
Delirium Tremens (Belgium)
Erdinger Hefetrub Weisse
Fischer
Franziskaner Hefe-Weisse
Hacker-Pschorr Weisse
Hoegaarden White
Isenbeck
Krombacher
Kronenbourg 1664
Paulaner
Spaten
Staropramen
Victoria Bitter
Warsteiner
KegLand Part number: KL06057
This special converter fitting allows you to easily convert back and forth between commercial kegs and homebrew style cornelius kegs with ease. They fit on the beer or gas side of a sanke tap, and instead of the standard clamped line connection that can't be changed, allow use to connect via a male flare swivel thread. Male flare is the same style of fitting found on homebrew quick disconnects.
Please view the you might also need products below for the correct female flare fittings to install on your draft line.
Kegland Part number: KL05159
Serve beer on the go with the JetKeg Keg Backpack
Fits up to a 5-gallon homebrew keg or sixtel commercial keg
Made with durable buckles and strong nylon shoulder and waist straps
Fully insulated to keep your keg colder for longer
Includes the Pluto Beverage Gun and EVABArrier tubing for dispensing
Mobile draft dispensing has a whole new meaning with the JetKeg Backpack from KegLand. Strap a keg to your back and walk through a crowd, dispensing delicious beer as you go. You'll have more followers than the fabled Pied Piper in no time. The backpack is fully insulated to keep your keg colder for longer, and features hot tape sealed seams on the inside to prevent leaking. If you've ever felt too anchored down serving beer from yet another booth at the festival, the JetKeg is the solution. Load up a 5-gallon homebrew keg or sixtel sanke keg and join the fray!
The JetKeg Backpack comes with the Pluto Beverage Gun, a precut length of EVABarrier tubing, and Duotight reducer to connect the tubing to the Pluto Gun. It does not include any gas side equipment, and you will need additional fittings depending on whether you'll be using it with a homebrew keg or commercial keg.
Includes:
JetKeg Backpack
1 x Black Nylon Pluto Gun (Duotight compatible)
1 x 6.5mm x 8mm Duotight Reducer (for Pluto Gun)
1 x Precut length of 4mm x 8mm EVABarrier tubing
Please note the example photos show accessories that are not included with the JetKeg. Does not include keg, gas fittings, keg coupler, CO2 cartridges or cylinder.
For Ball Lock Kegs, we recommend using the Mini CO2 Regulator Kit with a 74 g cartridge for your gas supply. Then use a flared ball lock disconnect with Duotight x Flare adpater to connect the Pluto Beer Gun to your bev out post.
For Sanke Kegs, we recommend using the Mini CO2 Regulator Kit with a 74 g cartridge for your gas supply. The Mini Regulator can connect to a D-Style keg coupler with the Gas-In Sanke to Ball Lock Adapter. The Pluto Beer Gun can be connected to the keg coupler beverage out with the Duotight x Beer Thread adapter.
KegLand Part Number: KL12560
