D-Type keg coupler for standard American sanke kegs Stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style sanke keg beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the keg coupler you’ll need. Made in America by Taprite, this keg coupler features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. It features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
Designed specifically for mounting the NukaTap Mini Beer Faucet on any kegerator, keezer, cold room wall, or other flat surface Connect beer line directly to the faucet, reducing the amount of temperature loss to a standard draft shank No spinning faucets. Your tap will remain in a fixed orientation once locked into the collet Easy installation. No need to drill a large hole through your fridge to accommodate a standard 5/8" draft shank Use with 6.35 mm OD EVABarrier draft tubing This shank kit is specifically designed to suit the NukaTap Mini Beer Faucet and will allow you to connect the NukaTap Mini to a cooler box, kegerator, keg fridge, cold room wall or any other flat surface. This wall mount shank kit is for use with 6.35 mm OD EVABarrier. For the shank kit for use with 8 mm OD EVABarrier, see here. New Innovative Shank Design Unlike other shank kits, this kit doesn't use a bulky 5/8" threaded shank. The issue with a standard draft shank is that acts as a heat sink, and due to the fact that most shanks sit inside an insulated wall, this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This results in substantial "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the faucet, greatly reducing the volume of non-refrigerated beer. No Spinning Shanks If you have ever installed a traditional 5/8" long shank, you will know how frustrating it is when you use the faucet and it starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the faucet to any orientation, but once the collet is tight, interlocking teeth on this shank kit and the NukaTap Mini will hold the tap permanently in the correct orientation. Easy Installation Another advantage compared to standard shanks is that this kit doesn't require you to drill a large 3/4"-1" hole through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result, an 8mm (5/16") conventional drill bit is all that is necessary for installation. However, if you are concerned about the small amount of beer sitting in the draft line inside the wall not being refrigerated, you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this the Step Drill Bit is the best tool for the job. Any Wall Thickness Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 2.7" thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. However, if the wall is thicker than 2.7" you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall so a common 1-1/4" long screw may be all that is required. Specifications: Beer Line Diameter: 6.35 mm OD EVABarrier Collet and Screw Cover: 304 Grade Stainless Steel O-ring Material: Dual O-ring Silicone/EPDM combination Plastic Mounting: Polyketone (POK) Temperature Range: 14-212°F (-10-100°C) Max Pressure: 150 psi KegLand Part Number: KL32193
An on/off ball valve and a check valve all-in-one!
Give your regulator an extra layer of protection with this dual purpose Shut-Off Check/Ball Valve. This valve gives you the flexibility to quickly turn off CO2 and at the same time keep beer from ever traveling back up the gas line and into the regulator. Standard equipment on our regulator.
Male 1/4" NPT x 5/16" barb.
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Right Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
Used to determine level of remaining gas in the tank.
1/4” MPT Right-hand thread fits most regulators.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel for longevity
Designed to fit KOMOS Premium Regulator (D1077) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Premium CO2 Regulator (D1077) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 model KOMOS regulator. It is not compatible with models D1170, D1171, D1175.
Keep your draft faucet in perfect working order.
Replace your old coupling nut to keep your faucet firmly attached to your shank
Knurled finish makes gripping easy
With this faucet replacement nut you can renew a worn-out part on your well-used draft faucet. This replacement part is the nut that attaches the faucet to the shank.
Knurled finish makes it easy to snug even with wet hands.
Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 2 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining.
Features:
Removable grill
Made from stainless steel
11.8" L x 6.7" W x 0.6" D
Kegland Part number: KL13161
A-Type keg coupler fits most German beer kegs such as Paulaner and Spaten
Click-to-engage ergo lever handle
Includes 1/4" OD barbs for gas inlet and liquid outlet
Barb elbow outlet is ideal for low clearance keg storage and easier line routing
For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD.
This model features a pull-ring pressure relief valve (not pictured).
This Keg Tap Will Usually Fit:
Ayinger
Bitburger Pilsner
Delirium Tremens (Belgium)
Erdinger Hefetrub Weisse
Fischer
Franziskaner Hefe-Weisse
Hacker-Pschorr Weisse
Hoegaarden White
Isenbeck
Krombacher
Kronenbourg 1664
Paulaner
Spaten
Staropramen
Victoria Bitter
Warsteiner
KegLand Part number: KL06057
Angled 1/4" tailpiece that is used with hex nut (D1740). Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Made from stianless steel. ID - 3/16" OD - 1/4" Kegland Part number: KL05081
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense 4 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Compact 2.5 lb size is perfect for mobile draft dispensing at BBQs and tailgate parties!
Brand new aluminum 2.5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 2.5 lb tank because it holds 2.5 lbs of compressed (liquified) CO2. 2.5 lbs of CO2 is enough to dispense about 4x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
14.75" T x 4.375 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg. In the example photo, the high pressure from the gas cylinder is fed to the regulator on the left, and then stepped down from there with the lowest pressure line in the right-most position. The holes for wall mounting the board and the holes for mounting the regulators are pre-drilled for easy installation. Made from food-grade polypropylene plastic. Regulators, fittings, labels, and mounting hardware are not included. For a fully rigged gas board, we recommend the following parts: 4 x Inline Regulators 8 x Rigid 8mm Joiners 3 x Duotight 8mm Tee Pieces 1 x Duotight 8mm Elbow These items can be found below under You Might Also Need. KegLand Part Number: KL17701
Keep your draft faucet in perfect working order!
If the lever gets stuck or is unused for a long time, it can break
Replace it to keep using your favorite tap handle and keep the beer flowing!
With this brass lever you can renew a worn-out part on your well-used draft faucet. This is the actual lever that opens and closes the faucet, and where the tap handle is threaded on. These levers can break if a faucet is left alone for too long and the lever gets stuck.
Install a tap where you want it, without the hassle of searching for all the separate components you’ll need. This faucet, knob, and shank combo is a great price, it’s easy to install, and it works and looks great!
This kit includes the 4" shank with 3/16" nipple, all stainless faucet, and plastic 2.5" knob.
These stainless short shanks are typically used for attaching faucets to a KOMOS® Cobra style draft tower. The threaded section measures 25mm in length (0.98").
Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
The coupling nut is what attaches your beer faucet to the shank. This black coupling nut pairs perfectly with the NukaTap Stealth Bomber faucet without the need to purchase a whole new shank. Or add some flair to your existing setup by mixing and matching black and stainless steel.
Handle this part with care, as scratches will show up more clearly compared to the stainless versions.
KegLand Part Number: KL20275
Quickly and securely connect to any VITOP tap on Bag-In-Box (BIB) bladders, creating a leak-free seal for seamless beverage transfer or refilling in seconds This connector's straightforward design makes it exceptionally easy to attach, detach, and clean, streamlining your beverage handling process Designed to work perfectly with 5L Stand Up Bladders, ensuring a reliable and efficient connection for a variety of popular bladder sizes The Kegland Bag-In-Box Bladder Refill or Transfer Connector is an incredibly easy and efficient way to connect to your Bag-In-Box (BIB) bladders. This connector creates a secure and leak-free connection to any VITOP tap, allowing you to transfer or refill beverages in just a few seconds. Whether you're a commercial establishment like a pub, cafe, or restaurant, or you just want to transfer beverages at home, this connector makes the process a breeze. Its simple design makes it incredibly easy to attach, detach, and clean. Works perfectly with the 5L Stand Up Bladders. Also available with a convenient Ball Lock Post attached. KegLand Part Number: KL40013
This 2" replacement gasket is intended for use with the KegLand Ball Lock Adapter Tapping Head for Sanke Kegs (KEG870). It only has the bead on one side of the gasket and the other side is flat. This gasket can also be used to directly clamp on an AlcoEngine Still Top to a compatible lid with 2" tri-clamp ferrule. It is not intended to be used as a replacement gasket for standard tri-clamp fittings. KegLand Part Number: KL99895
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
This beverage line jumper connects to the bev output on a ball lock homebrew keg and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1761 & D1763). Specifications: 5 ft of 5/16" ID Beverage Tubing 5/16" Tailpiece Elbow Flared Ball Lock Bev Out
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The KOMOS stainless S-Style coupler is built for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. Featuring stainless steel body and stainless steel probe, this keg tap is made to last. The coupler comes without fittings so it can be adapted however you sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port.
Both gas-in and bev-out ports come bare so you can fit it out exactly how you want it. Maybe you like a larger gas line and smaller beer line—no problem. Or perhaps you're ready to take your draft system into the 21st century with EVABarrier draft tubing and Duotight push-to-connect fittings. Whatever floats your boat, keep your draft setup anchored with the KOMOS keg coupler.
The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a higher or lower pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a picnic bench or folding table—an ideal option for backyard cookouts or concerts in the park Makes for a great temporary shank for weekend getaways, camping, or tailgating This bracket is compatible with table or bench edges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL0407
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut. Tailpieces are available in a range of barb sizes to fit up to your tubing size. Stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer. This elbow shaped tailpiece helps you fit your tubing runs in tight spaces, requiring just 1-5/8" clearance above the tap or behind the shank. Use with hex nut (D1740). ID - 3/16" OD - 1/4"
5/16" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 1/4" OD - 5/16"
Stainless steel splicer designed for connecting two different sizes of tubing together. The smaller barb will accept 3/16 in or 1/4 in ID tubing (typical to homebrew systems) on one side, and the larger barb will accept 5/15 in or 3/8 in ID tubing common to commercial systems. Sold individually.
The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can potentially be a beer draining arrangement. When you leave for the weekend, stop the flow with a faucet lock. A quick easy locking system that attaches directly to the faucet. Specifically designed for Perlick 630 series draft faucets. For standard beer faucets, please see D1274.
Rinse and chill your glassware before every pour! Install on the countertop of your wet bar or kitchen sink and hook up to your home water supply Invert and push down your glassware to activate the spray action Excellent kitchen accessory for rinsing wine glasses, compact blenders, tumblers, and More!
A push activated glass rinser can be the perfect final touch to your wet bar for the serious home beertender. Install at the edge of your sink and connect to your household's main water supply. Push down in short bursts to rinse your glass of dust, residual dish soap, and to pre-chill the glass before pouring a pint. These compact glass rinsers are capable of withstanding up to 100 psi of pressure. The 1/2" BSP threaded rod is compatible with a number of Duotight attachments. We recommend installing with PE Water Line and this 1/2" adapter. How to Use: Invert glass and empty last drips into sink Press glass onto the center of the glass rinser in short bursts If you have access to an inline carbonated water source, using bubbly water will really give your glasses a stripping clean. This device can also be used with chilled water to cool your glass down in between beverages. 4.3" H x 4.5" W KegLand Part Number: KL27649
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing.
4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range.
The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Replacement flow control shuttles for the Gen 1 NukaTap FC model faucet (D1584). These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. A backwards compatible replacement shuttle for the Gen 2 NukaTap Flow Control Faucet is coming soon. KegLand Part Number: KL17817
An easy and inexpensive way to split your CO2 gas line to multiple taps. Made from stainless steel; the metal preferred by homebrewers.
This Stainless Steel CO2 Tee is sized to work best with 5/16" tubing, the standard size used for gas lines. The barbs on this Tee are 0.4" OD. Be sure to order hose clamps to secure your tubing to the tee.
Quick Tips: Place the end of the tubing in 100-120F water for a minute or so to soften before pushing onto the ends of the Tee. We suggest wearing work gloves when putting tubing onto this product as the ends can sometimes be sharp.
Minimize oxygen exposure by flattening the bag before filling to keep your wine, cider, spirits, or cold brew as fresh as the day it was made
This cost-effective tool connects easily to your existing brewing setup with a standard ball lock post, making it a simple and quick solution for refilling bladders without expensive machines
Fill your bag-in-box bladder directly from your brewing vessel. The clever design means the bladder's tap is already in place when full, so it's ready to dispense immediately without extra steps or mess
Tired of tricky transfers that risk oxidizing your wine, cider, spirits, or cold brew? The Bag-In-Box Bladder Refill and Transfer Connector simplifies the process, making it easy to fill bladders without losing quality.
This cost-effective tool lets you forget expensive filling machines and get straight to the good stuff. It's designed to be simple and effective.
Key Features:
Easy Filling: Connect the device to your bladder's tap, engage the knob, and fill it just like you would a keg through the yellow ball lock post.
Minimized Oxidation: Before filling, you can flatten the bag to remove all oxygen, ensuring your beverage stays fresh and delicious.
How it works: Simply attach the connector to your bladder's tap. The ball lock post lets you fill from your brewing setup, making the process quick and seamless. Once full, the tap is already in place for easy dispensing.
KegLand Part Number: KL39253
This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines.
Comes in a convenient zip lock bag.
Yeast require oxygen for growth, make sure you always have some available to oxygenate your wort prior to pitching!
This 20 cubic foot O2 cylinder is good for about 500 batches of beer.
Hate having your disposable oxygen tank run out right before you were about to pitch your yeast? Or just tired of running through disposable tanks in general? Consider stepping up to a refillable oxygen cylinder. Whether you brew big batches or brew frequently, a refillable oxygen tank is a great way to save time and money.
The tank needs to be hydrotested every 10 years and is easily and affordably filled at any participating welding gas company.
Specs:
Cylinder: 20 cu ft
Material: Steel Cylinder – Standard Valve
Capacity: 20 cu ft (566 Liters)
Service Pressure: 2015 PSI / 139 Bar
Test Pressure: 3360 PSI
DOT- and TC- Approved
Valve Type: CGA540
Dimensions:
Diameter: 5.2" (132 mm)
Height: 14.8" (376 mm)
Empty Weight: 14.1 lb
This Friction Bonnet is the piece that sits between the body of the faucet and the faucet knob lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
Fits all Intertap and Nukatap faucet models.
Show everyone you mean business with these 50 caliber BMG beer tap handles. Made from real, once fired, 50 caliber bullets that are hand polished and coated with an anti-tarnish lacquer. The 50 Caliber BMG is used in most of the military's heavy machine guns. A great addition to any man cave!
Fits all US Faucet levers, 3/8” – 16 UNC (Unified Coarse Thread).
Does not come with faucet!
This stainless steel drip tray is perfect for the KOMOS Double-Wide kegerator and home bar countertops. At 29.5" in length, this drip tray can comfortably cover up to 8 draft faucets. The grill is removable for easy cleaning.
Features:
Removable grill
Made from stainless steel
29.5" L x 6.7" W x 0.9" D
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS coupler can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock.
Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Perfect for summertime parties, the low-profile design makes this pump easy to use, store, and transport. At the beach, the park, or in the backyard, the Shorty will provide you with great beer keg after keg. For D style kegs.
Also known as a keg coupler, coupling, or adapter.
This tailpiece is a replacement for the gas-in barb that comes mounted on our D1505 Sanke Tap. It will not work as a 5/16" beer line connection due to the lip on the back side of the fitting.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
