CBD Extraction

Certified Food-Grade Propylene Glycol Inhibited Coolant 100% Concentrate for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. NSF Certified, food-grade inhibited propylene glycol fluid which is intended for use in antifreeze and heat transfer applications where contact with food may occur, such as wineries, micro-breweries, meatpackers, and other food-related industries.  Formulated with propylene glycol and an inhibitor system which is effective at preventing rust and corrosion in aluminum, brass, cast iron, copper, solder and steel-containing systems.  Operating Range: -50°F to 325°F (-46°C to 163°C) Application: HVAC system freeze/burst/corrosion protection Immersion freezing Cooling liquid foods Packaging carbonated beverages Fermentation cooling Refrigeration coil defrosting Cold room dehumidifying Conveyor roller defrosting Process cooling Process heating Waste heat recovery PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. Always test your heat exchangers with water to check for pinhole leaks. In case of consumption please contact your local Poison Control Center immediately.  

Read more less

The IceMaster 100 is a powerful and efficient glycol system that provides precise temperature control of multiple Fermenters, but allows you to expand your capacity as needed! Temp Control & Cold Crash up to 4 - 5-7 Gallon Jacketed Tanks! Tank Capacity: 30L/8 Gal. Water Capacity Cooling Capacity: 780 Watt/2600btu/0.26 ton Power: 110V (3.6 amps) The IceMaster 100 is designed to cool fermentations in small vessels. It can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. For each vessel you want to cool you will need to buy one of our BrewBuilt Chilling Pump Kits.  Each tank is able to be separately temperature controlled. Each Glycol Pump Kit includes a submersible pump that is placed in the cool bath of this chiller along with a digital controller. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster and four BrewBuilt Chilling Pump Kit (GLY355).  Compatibility The IceMaster can be used with any fermenter that has a built in cooling jacket, added Coolstix, or a submersed cooling coil. It works well as the cooling source for the following sytems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Coolstix - Coolstix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each Coostix Complete Kit comes with a pump kit and controller. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems - Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.   Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.  Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank.    Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation.  We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation.  If only controlling fermentation temps the capacity would be higher.  Four BrewBuilt Chilling Pump Kits (GLY355) is the maximum that will fit in the IceMaster. We are working on smaller glycol pump kits, where the pumps have smaller footprints, so the IceMaster right now has the capacity to use 5 pumps through the bulkhead fittings.  Capacity calculated at cold crashing to 38°F at 75°F ambient with neoprene insulation (double for fermentation temperature control):  2 - 1BBL (31 Gallon) Jacketed Tanks 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks  4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 4 lengths of tubing. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to IceMaster resevoir (should drain freely, no connection necessary) Specifications: Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: r134a Voltage: 110V (3.6 amps) Dimensions: 410mm x 410mm x 660mm Includes 10 stainless bulkheads with 3/8" OD barbs Wheels included CE Certified Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included! 15% extra headspace with a working volume of 2 bbl and max volume of 2.3 bbl True domed top and bottom with full length site gauge with sediment trap 2mm thick single shell design—click here for the 2 bbl Jacketed Brite Ships domestically from within the contiguous United States Available Ludicrous Coil for glycol-supplied temperature control MB brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. The standard 1 & 2 bbl MB Brites feature a single shell design, sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons. Please note: these units do not have a built-in cooling jacket and are intended to be used in a walk-in cold room for temperature control. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 304 stainless steel construction True domed top and bottom Full length site gauge with sediment trap Pressure/Vacuum relief valve 1 Bar / 15 PSI Carbonation stone Sealed pressure gauge Analog temperature gauge Sample valve Center bottom tri-clamp drain Top vent/CO2 port with butterfly valve Pt100 Thermocouple interface Specifications: Grade 304 Stainless Steel 2mm thick single shell design Internal Finish: #2B Tank Height w/ Blowoff Pipe: 48.5" Tank Diameter w/ Fittings: 31" Empty Weight: 154 lbs Working Volume: 2 bbl Max Volume: 2.3 bbl Working Pressure: 1 Bar (14.5) All ports are 1.5" TC except 12" TC Dome Port and 4" TC Hopping Port   Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Glycol Chillers for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. If you desire to do cold stabilization with this small chiller you will need to insulate your tanks very well and have sufficient cooling surface area in contact with the wine. A better machine for cold stabilization is our Chilly45 made by Kreyer, featuring 4x the power. Features of Glycol System #1 Digital Thermostat Digital Temperature Controller 2,300 btu/hr Compressor 1/3 hp Vertical-type pump 115V power 4.5 gallon bath capacity Max distance of glycol line is 75 feet 22-1/4" H x 17-3/8" W x 26" D 118 pounds Will cool glycol bath down to approximately 20°F

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included! 15% extra headspace with a working volume of 2 bbl and max volume of 2.3 bbl True domed top and bottom with full length site gauge with sediment trap 1.5 mm thick dimple welded cooling jacket—click here for the 2 bbl Single Shell Brite Ships domestically from within the contiguous United States These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. MB brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. The 1 & 2 bbl Jacketed Brites feature sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 304 stainless steel construction Includes a glycol jacket which is dimple welded and 1.5 mm thick True domed top and bottom Full length site gauge with sediment trap Pressure/Vacuum relief valve 1 Bar / 15 PSI Carbonation stone Sealed pressure gauge Analog temperature gauge Sample valve Center bottom tri-clamp drain Top vent/CO2 port with butterfly valve Pt100 Thermocouple interface Specifications: Grade 304 Stainless Steel Internal Finish: #2B Tank Height w/ Fittings: 53.5" Tank Diameter: 29.5" Empty Weight: 265 lbs Working Volume: 2 bbl Max Volume: 2.3 bbl Working Pressure: 1 Bar (14.5) All ports are 1.5" TC except for 12" TC Dome Port and 4" TC Hopping Port and 1/2" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! 20% extra headspace with a working volume of 2 bbl and max volume of 2.4 bbl Glycol ready with 2" insulated cooling jacket—click here for the 2 bbl Single Shell Conical Ships domestically from within the contiguous United States These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, this jacketed tank comes ready for glycol cooling. Large 10" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency. The 1 & 2 bbl MB Conicals feature a sealed pressure gauge, as well as plunger-style sample valve to protect against infection. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.  Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick 2" of internal insulation between tank and outer jacket Oversized for 20% headspace Pressure/Vacuum relief valve 1 Bar / 15 PSI Pt100 Thermocouple interface 60° conical bottom Sample valve Rotating racking arm Analog temperature gauge Yeast dump port Hop port CIP port Carb stone Separate blow-off pipe Specifications: Grade 304 Stainless Steel Internal Finish: #2B Total Height w/ Blowoff Pipe: 64" Tank Diameter w/ Fittings: 39" Empty Weight: 397 lbs Working Volume: 2 bbl Max Volume: 2.4 bbls Working Pressure: 1 Bar (14.5 psi) Jacket Surface area: 1,188 in² (0.767 m²) All ports are 1.5" TC except for 12" TC Dome Port, 4" TC Hopping Port, 2" TC Racking Arm, and 1/2" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 5 tons (60,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI 230 v 1 phase power (MCA 40.8) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note:  This unit REQUIRES 230 v Single Phase power (MCA 40.8) and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.  

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 2 tons (24,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM @ 30 PSI 230 v Single Phase power (MCA 21.3) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 42"x32.5"x51.5" 350 lb UL Certified Please Note:  This unit REQUIRES 230 v Single Phase power (MCA 21.3) and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.

Read more less

Glycol power packs for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. Features 2300 btu Digital Thermostat Max distance of glycol "out" line - 125 Feet. Vane (Procon) with 1/3 HP Motor 115V Power 11.5 gallon bath capacity Dimensions: 27-1/2"H x 18"W x 29"D Weight: 120 pounds

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation  Over 25% extra headspace with a working volume of 3.5 bbl and max volume of 4.8 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.   3” of internal insulation between tank and outer jacket when the industry standard is 2” Horizontal racking arm and carbonation stone Separate cone and tank cooling jackets DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish  All Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 1x Pt100 Thermocouple interface Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Specifications for 3.5 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 72", With Blowoff Pipe: 78" Tank Diameter: 40" Empty Weight: 485 lbs Working Volume: 3.5 bbls Max Volume: 4.8 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 1,558 in² (1.005 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! 20% extra headspace with a working volume of 1 bbl and max volume of 1.2 bbl Glycol ready with 2" insulated cooling jacket—click here for the 1 bbl Single Shell Conical Ships domestically from within the contiguous United States These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, this jacketed tank comes ready for glycol cooling. Large 10" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency. The 1 & 2 bbl MB Conicals feature a sealed pressure gauge, as well as plunger-style sample valve to protect against infection. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.  Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick 2" of internal insulation between tank and outer jacket Oversized for 20% headspace Pressure/Vacuum relief valve 1 Bar / 15 PSI Pt100 Thermocouple interface 60° conical bottom Sample valve Rotating racking arm Analog temperature gauge Yeast dump port Hop port CIP port Carb stone Separate blow-off pipe Specifications: Grade 304 Stainless Steel Internal Finish: #2B Total Height w/ Blowoff Pipe: 58" Tank Diameter w/ Fittings: 31" Empty Weight: 330 lbs Working Volume: 1 bbl Max Volume: 1.2 bbls Working Pressure: 1 Bar (14.5 psi) Jacket Surface area: 795 in² (0.513 m²) All ports are 1.5" TC except for 10" TC Dome Port, 4" TC Hopping Port, 2" TC Racking Arm, and 1/2" NPT Glycol Ports Please note: the 2 bbl unit is shown in the example photo. Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! 20% extra headspace with a working volume of 15 bbl and max volume of 18 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 93" Tank Diameter: 58" Empty Weight: 1,014 lbs Working Volume: 15 bbl Total Volume: 18 bbl Jacket Surface Area: 5,965 in² (3.848 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! Over 20% extra headspace with a working volume of 5 bbl and max volume of 6.25 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 73" Tank Diameter: 42" Empty Weight: 551 lbs Working Volume: 5 bbl Total Volume: 6.25 bbl Jacket Surface Area: 2,629 in² (1.696 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 5 tons (60,000 BTU/hr) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI 230 v 3 phase power Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note:  This unit REQUIRES 230 v Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.  

Read more less

Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 1.8 Ton / 21,840 Btu cooling capacity 230V, 3 Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V 3 phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 1.8 Tons (21,840btu) of cooling power .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230V 60Hz 3 phase supply voltage drawing 13.1 amps Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note:  This unit REQUIRES 230 v Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes.  For additional product options click here.

Read more less

US Made industrial glycol chillers available in a wide range of tonnages. Cold Shot Chillers are some of the most dependable and economical chillers on the market.  These portable air-cooled chillers are built in the USA with time-proven components, and are supported 24/7 by a network of techs in the US.  These chillers are built to provide a lifetime of service, allowing precise temperature control during all aspects of the wine or beer making process.  Powerful compressors combined with a large reservoir means huge cooling capacities, able to keep you running through the hottest months. Cold Shot Chillers are built with high quality components designed for trouble-free use, but should an issue occur, technical support is available at all times, and if necessary a technician familiar with your unit can come service it on site. Uses in Beer Making: Temperature control for fermentation, heating or cooling Temperature control for storage Temperature control for packaging Air conditioner Barrel rooms Cold box Uses in Winemaking: Cooling of must for cold soaks, slow starting ferments Cooling must for cold soaking or slow starting / low temp ferments Cold stabilization of wine Controlling fermentation temperatures Maintaining storage temperatures in tanks / barrels Controlling cellar or winery air temperatures with a fan unit Features: 10 tons (120,000 BTU/hr) 41 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20 - 70° F. Rated to 0°F ambient temperature* 1.25” MNPT Inlet and Outlet Stainless Steel 1.5 HP Centrifugal Pump outputs 40 GPM at 30 PSI 230 v 3 phase power (MCA 49.4) Required Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1 Year Parts Warranty 5 Year Warranty on Compressor Welded steel powder coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 61.5"x40"x70" 1100 lb UL Certified Please Note:  This unit REQUIRES 230 v Three Phase power (MCA 49.4) and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. *Please Note: This unit is rated for ambient temperatures as low as 0°F. If you require a subzero temperature rating, please contact our customer service department to request a special order.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early February. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included! 20% extra headspace with a working volume of 1 bbl and max volume of 1.2 bbl True domed top and bottom with full length site gauge with sediment trap 2mm thick single shell design—click here for the 1 bbl Jacketed Brite Ships domestically from within the contiguous United States MB brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. The standard 1 & 2 bbl MB Brites feature a single shell design, sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons. Please note: these units do not have a built-in cooling jacket and are intended to be used in a walk-in cold room for temperature control. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 304 stainless steel construction True domed top and bottom Full length site gauge with sediment trap Pressure/Vacuum relief valve 1 Bar / 15 PSI Carbonation stone Sealed pressure gauge Analog temperature gauge Sample valve Center bottom tri-clamp drain Top vent/CO2 port with butterfly valve Pt100 Thermocouple interface Specifications: Grade 304 Stainless Steel 2mm thick single shell design Internal Finish: #2B Tank Height w/ Blowoff Pipe: 47" Tank Diameter w/ Fittings: 28" Empty Weight: 100 lbs Working Volume: 1 bbl Max Volume: 1.2 bbl Working Pressure: 1 Bar (14.5) All ports are 1.5" TC except 10" TC Dome Port and 4" TC Hopping Port   Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more mid March. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! 15% extra headspace with a working volume of 20 bbl and max volume of 23 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 100" Tank Diameter: 62" Empty Weight: 1,102 lbs Working Volume: 20 bbl Total Volume: 23 bbl Jacket Surface Area: 8,291 in² (5.349 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! 15% extra headspace with a working volume of 10 bbl and max volume of 11.5 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 85" Tank Diameter: 50" Empty Weight: 728 lbs Working Volume: 10 bbl Total Volume: 11.5 bbl Jacket Surface Area: 4,047 in² (2.611 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early February. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! Over 20% extra headspace with a working volume of 7 bbl and max volume of 8.75 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Ladder hooks Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Shadowless Manway Construction 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 75" Tank Diameter: 48" Empty Weight: 617 lbs Working Volume: 7 bbl Total Volume: 8.75 bbl Jacket Surface Area: 3,241 in² (2.091 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in mid March. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! Over 20% extra headspace with a working volume of 3.5 bbl and max volume of 4.25 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards.  All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty.  Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain 4" Hopping Port Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports PT100 Thermocouple interface Construction 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 61" Tank Diameter: 40" Empty Weight: 463 lbs Working Volume: 3.5 bbl Total Volume: 4.25 bbl Jacket Surface Area: 2,024 in² (1.306 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early February. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation  20% extra headspace with a working volume of 20 bbl and max volume of 24 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.  Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.   3” of internal insulation between tank and outter jacket when the industry standard is 2” Horizontal racking arm and carbonation stone Separate cone and tank cooling jackets DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish  All Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI Pt100 Thermocouple  Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 20 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 117", With Blowoff Pipe: 127" Tank Diameter: 62" Empty Weight: 1,146 lbs Working Volume: 20 bbls Max Volume: 24 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 7,372 in² (4.756 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports   Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early April. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation  Over 25% extra headspace with a working volume of 7 bbl and max volume of 9 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.  Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks. 3” of internal insulation between tank and outer jacket when the industry standard is 2” Horizontal racking arm and carbonation stone Separate cone and tank cooling jackets DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish  All Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 1x Pt100 Thermocouple interface Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 7 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 88", With Blowoff Pipe: 93" Tank Diameter: 48" Empty Weight: 640 lbs Working Volume: 7 bbls Max Volume: 9 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 3,325 in² (2.145 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in mid March. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation  20% extra headspace with a working volume of 5 bbl and max volume of 6 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.  Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.  3” of internal insulation between tank and outter jacket when the industry standard is 2” Horizontal racking arm and carbonation stone Separate cone and tank cooling jackets with individual Pt100 Thermocouples  DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish  All Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 1x Pt100 Thermocouple interface Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 5 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 81", With Blowoff Pipe: 86" Tank Diameter: 42" Empty Weight: 574 lbs Working Volume: 5 bbls Max Volume: 6 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 2,176 in² (1.404 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports   Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation  Over 25% extra headspace with a working volume of 30 bbl and max volume of 37.75 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.  Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.  3” of internal insulation between tank and outter jacket when the industry standard is 2” Separate cone and tank cooling jackets with individual Pt100 Thermocouples  DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish  All Features: 304 stainless steel construction Horizontal racking arm and carbonation stone The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 2x Pt100 Thermocouple interfaces at top and bottom (3x Pt100 on 30 bbl & up) Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 30 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 137", With Blowoff Pipe: 142" Tank Diameter: 69" Empty Weight: 1,499 lbs Working Volume: 30 bbls Max Volume: 37.75 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 11,109 in² (7.167 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports   Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation  ~20% extra headspace with a working volume of 15 bbl and max volume of 17.75 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.   Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.  3” of internal insulation between tank and outter jacket when the industry standard is 2” Horizontal racking arm and carbonation stone Separate cone and tank cooling jackets DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish  All Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI Pt100 Thermocouple for accuracy Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 15 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 104", With Blowoff Pipe: 109" Tank Diameter: 58" Empty Weight: 1,058 lbs Working Volume: 15 bbls Max Volume: 17.75 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 5,447 in² (3.514 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports   Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.  

Read more less