The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure.
It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria.
Features:
Ferment, carbonate, and serve all from a single vessel
Sanitary sample valve with rotating racking arm
Keg can be used as a fermentor or a serving keg
Cleaning made easy with a removable bottom
1.5 in. butterfly dump valve
Rated up to 50 psi
Made from sanitary stainless steel
Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
This is the Cornical Keg only. For the Fermentation Kit check out BL279 or for the complete kit check out BL275. The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure. It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria. Features: Ferment, carbonate, and serve all from a single vessel Sanitary sample valve with rotating racking arm Keg can be used as a fermentor or a serving keg Cleaning made easy with a removable bottom 1.5 in. butterfly dump valve Rated up to 50 psi Made from sanitary stainless steel Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
This is the Fermentation Kit only. For the Corinical Keg check out BL27 or for the complete kit check out BL275. The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure. It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria. Features: Ferment, carbonate, and serve all from a single vessel Sanitary sample valve with rotating racking arm Keg can be used as a fermentor or a serving keg Cleaning made easy with a removable bottom 1.5 in. butterfly dump valve Rated up to 50 psi Made from sanitary stainless steel Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
Use this coil to make a cooling system for your 14 to 42 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system.
Features:
25 ft long tube made from 304 stainless steel
Tall Cooling Coil fits 14 to 42 gallon Fermenator
Easy to install and sanitize bulkhead fittings
1/2" NPT connections
Includes two 3/8" 90° QuickConnector fittings
13.5" tall x 9" diameter
Manage your fermentation temperatures to exacting precision and repeatability with the Blichmann Pump & Controller Kit. The perfect system to pair with a glycol chiller or ice bath, and the Fermenator™ cooling coils.
Features:
High quality 24V DC submergible pump has 5 GPM output and quiet operation
Temperature Controller is tuned and designed for brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! 15A 120V operation
12” long thermowell fits in the included three hole stopper. Fits all Fermenator™ conicals and any other vessel requiring a #7 stopper
Includes 10ft of 3/8” PVC hose and hose clamps
Compatible with Fermenator™ sizes 7, 14.5, 27, and 42 gallon
Kit Includes:
Submergible Pump
Temperature Controller
10 ft. of 3/8" Silicone Tubing
3 Butterfly Hose Clamps
Thermowell
Dual Hole Stopper
Power Adapter
The Blichmann temperature controller is a simple and easy to use controller for home brewing. Plug it in and start controlling your temps right out of the box! Simply plug your refrigerator or pump into the front and you’re ready to go. This is a direct replacement to the controller found in the Blichmann Fermenator™ Pump & Controller Kit.
Features:
120V 15A operation
Control temps to +/- 1F
Temperature Control Range: 16 - 220°F
Fahrenheit display
Selectable heat and cool modes (not dual stage)
Plugs into any 120V wall receptacle – no mounting holes needed!
Reduced cable clutter
Plug can be inverted to match your receptacle
9.5 ft sensor cable length
1.5" sensor probe length
Please note: this controller is not intended to be used with a heating element.
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features:
Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Integral blow-off barb fitting adds a visual indication of fermentation if desired NPT model is perfect for the Blichmann Engineering™ Cornical™ Unitank (BL275) Also available in T.C. model (BL152)
This is a Blichmann Spare Part. 1/2" tri-clamp gasket. This is the gasket used on the Blichmann Fermenator's racking arm.
Note: Each order comes with one gasket.
Use this coil to make a cooling system for your 7 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system.
Features:
25 ft long tube made from 304 stainless steel
Short Cooling Coil fits up to 7 gallon Fermenator
Easy to install and sanitize bulkhead fittings
1/2" NPT connections
Includes two 3/8" 90° QuickConnector fittings
9.5" tall x 9" diameter
Tired of your small airlock getting clogged from aggressive ferments? This blow-off kit is designed to work with the Tri-Clover Blichmann Fermenator. A superb upgrade for those looking for an airlock system that can handle aggressive, high gravity ferments.
In 2004, the Fermenator™ revolutionized the homebrew market as the first pressure capable homebrew conical. We are proud to announce the latest model: the Fermenator™ G4. Reimagined from the ground up, this true unitank leverages our 20+ years of experience in home and pro brewing, and our reputation of innovation. From the welded tri-clamp fittings, the 15 PSI capability, the always-sanitary aseptic racking arm, the external level gauge, and many other purpose-built accessories, you’ll find that the Fermenator™ G4 stands in a league of its own. Most competitors nickel-and-dime you with needed, but not included accessories like a sampling valve or racking arm! But not the Fermenator™ G4. We include more standard accessories than the competition at a value no one can beat.
Features:
Welded Tri-Clamp Fittings: All fittings are 1.5” tri-clamps and are sanitary welded into the heaviest gauge tank and lid on the market.
Pressure Capable Unitank: With 15 PSI (1 BAR) pressure capability, and the included integral pressure relief valve, you can ferment under pressure for reducing fruity esters in your beers, pressure transfer beer into kegs, or carbonate and use as a serving vessel.
Aseptic Racking Valve: The revolutionary patent pending aseptic racking valve takes the struggle out of keeping your sampling valve sanitary. Similar to pharmaceutical grade sampling valves, the new G4 aseptic valve can be filled with sanitizer between uses so all wetted surfaces always remain sanitized. No spraying. No worrying. No contamination.
Brushed Exterior, Polished Interior: Let’s admit it - our breweries are show-pieces for friends and families. And we work hard to keep them looking new. Like our Pro Brewing equipment, we’ve selected a sleek brushed exterior finish that is significantly easier to keep free of stains and fingerprints and gives that true pro-look to your brewery. Lastly, we’ve put a mirror polish on the interior to improve cleaning and yeast sedimentation.
Positive Seal Racking Arm: Loosening a racking arm clamp can lead to beer leaking from the joint, or worse yet, a clamp popping off and causing the loss of the full batch of beer. We’ve included an integral seal to eliminate beer leaks, and a long position indicating pin to allow the fitting to be easily rotated with minimal loosening of the clamp.
Dial Thermometer: The included tri-clamp thermometer reads in F and C, and the scale is perfect for fermentation temps.
Dimensions:
Tank Height: 37.38"
Foot Height: 1.5"
Depth (Front and Back): 20.13"
Width: 17.75"
Batch Size: 10 Gallons
In 2004, the Fermenator™ revolutionized the homebrew market as the first pressure capable homebrew conical. We are proud to announce the latest model: the Fermenator™ G4. Reimagined from the ground up, this true unitank leverages our 20+ years of experience in home and pro brewing, and our reputation of innovation. From the welded tri-clamp fittings, the 15 PSI capability, the always-sanitary aseptic racking arm, the external level gauge, and many other purpose-built accessories, you’ll find that the Fermenator™ G4 stands in a league of its own. Most competitors nickel-and-dime you with needed, but not included accessories like a sampling valve or racking arm! But not the Fermenator™ G4. We include more standard accessories than the competition at a value no one can beat.
Features:
Welded Tri-Clamp Fittings: All fittings are 1.5” tri-clamps and are sanitary welded into the heaviest gauge tank and lid on the market.
Pressure Capable Unitank: With 15 PSI (1 BAR) pressure capability, and the included integral pressure relief valve, you can ferment under pressure for reducing fruity esters in your beers, pressure transfer beer into kegs, or carbonate and use as a serving vessel.
Aseptic Racking Valve: The revolutionary patent pending aseptic racking valve takes the struggle out of keeping your sampling valve sanitary. Similar to pharmaceutical grade sampling valves, the new G4 aseptic valve can be filled with sanitizer between uses so all wetted surfaces always remain sanitized. No spraying. No worrying. No contamination.
Brushed Exterior, Polished Interior: Let’s admit it - our breweries are show-pieces for friends and families. And we work hard to keep them looking new. Like our Pro Brewing equipment, we’ve selected a sleek brushed exterior finish that is significantly easier to keep free of stains and fingerprints and gives that true pro-look to your brewery. Lastly, we’ve put a mirror polish on the interior to improve cleaning and yeast sedimentation.
Positive Seal Racking Arm: Loosening a racking arm clamp can lead to beer leaking from the joint, or worse yet, a clamp popping off and causing the loss of the full batch of beer. We’ve included an integral seal to eliminate beer leaks, and a long position indicating pin to allow the fitting to be easily rotated with minimal loosening of the clamp.
Dial Thermometer: The included tri-clamp thermometer reads in F and C, and the scale is perfect for fermentation temps.
Dimensions:
Tank Height: 37.5"
Foot Height: 1.5"
Depth (Front and Back): 24"
Width: 20.25"
Batch Size: 15 Gallons
In 2004, the Fermenator™ revolutionized the homebrew market as the first pressure capable homebrew conical. We are proud to announce the latest model: the Fermenator™ G4. Reimagined from the ground up, this true unitank leverages our 20+ years of experience in home and pro brewing, and our reputation of innovation. From the welded tri-clamp fittings, the 15 PSI capability, the always-sanitary aseptic racking arm, the external level gauge, and many other purpose-built accessories, you’ll find that the Fermenator™ G4 stands in a league of its own. Most competitors nickel-and-dime you with needed, but not included accessories like a sampling valve or racking arm! But not the Fermenator™ G4. We include more standard accessories than the competition at a value no one can beat.
Features:
Welded Tri-Clamp Fittings: All fittings are 1.5” tri-clamps and are sanitary welded into the heaviest gauge tank and lid on the market.
Pressure Capable Unitank: With 15 PSI (1 BAR) pressure capability, and the included integral pressure relief valve, you can ferment under pressure for reducing fruity esters in your beers, pressure transfer beer into kegs, or carbonate and use as a serving vessel.
Aseptic Racking Valve: The revolutionary patent pending aseptic racking valve takes the struggle out of keeping your sampling valve sanitary. Similar to pharmaceutical grade sampling valves, the new G4 aseptic valve can be filled with sanitizer between uses so all wetted surfaces always remain sanitized. No spraying. No worrying. No contamination.
Brushed Exterior, Polished Interior: Let’s admit it - our breweries are show-pieces for friends and families. And we work hard to keep them looking new. Like our Pro Brewing equipment, we’ve selected a sleek brushed exterior finish that is significantly easier to keep free of stains and fingerprints and gives that true pro-look to your brewery. Lastly, we’ve put a mirror polish on the interior to improve cleaning and yeast sedimentation.
Positive Seal Racking Arm: Loosening a racking arm clamp can lead to beer leaking from the joint, or worse yet, a clamp popping off and causing the loss of the full batch of beer. We’ve included an integral seal to eliminate beer leaks, and a long position indicating pin to allow the fitting to be easily rotated with minimal loosening of the clamp.
Dial Thermometer: The included tri-clamp thermometer reads in F and C, and the scale is perfect for fermentation temps.
Dimensions:
Tank Height: 55.75"
Foot Height: 1.5"
Depth (Front and Back): 24"
Width: 20.25"
Batch Size: 31 Gallons
In 2004, the Fermenator™ revolutionized the homebrew market as the first pressure capable homebrew conical. We are proud to announce the latest model: the Fermenator™ G4. Reimagined from the ground up, this true unitank leverages our 20+ years of experience in home and pro brewing, and our reputation of innovation. From the welded tri-clamp fittings, the 15 PSI capability, the always-sanitary aseptic racking arm, the external level gauge, and many other purpose-built accessories, you’ll find that the Fermenator™ G4 stands in a league of its own. Most competitors nickel-and-dime you with needed, but not included accessories like a sampling valve or racking arm! But not the Fermenator™ G4. We include more standard accessories than the competition at a value no one can beat.
Features:
Welded Tri-Clamp Fittings: All fittings are 1.5” tri-clamps and are sanitary welded into the heaviest gauge tank and lid on the market.
Pressure Capable Unitank: With 15 PSI (1 BAR) pressure capability, and the included integral pressure relief valve, you can ferment under pressure for reducing fruity esters in your beers, pressure transfer beer into kegs, or carbonate and use as a serving vessel.
Aseptic Racking Valve: The revolutionary patent pending aseptic racking valve takes the struggle out of keeping your sampling valve sanitary. Similar to pharmaceutical grade sampling valves, the new G4 aseptic valve can be filled with sanitizer between uses so all wetted surfaces always remain sanitized. No spraying. No worrying. No contamination.
Brushed Exterior, Polished Interior: Let’s admit it - our breweries are show-pieces for friends and families. And we work hard to keep them looking new. Like our Pro Brewing equipment, we’ve selected a sleek brushed exterior finish that is significantly easier to keep free of stains and fingerprints and gives that true pro-look to your brewery. Lastly, we’ve put a mirror polish on the interior to improve cleaning and yeast sedimentation.
Positive Seal Racking Arm: Loosening a racking arm clamp can lead to beer leaking from the joint, or worse yet, a clamp popping off and causing the loss of the full batch of beer. We’ve included an integral seal to eliminate beer leaks, and a long position indicating pin to allow the fitting to be easily rotated with minimal loosening of the clamp.
Dial Thermometer: The included tri-clamp thermometer reads in F and C, and the scale is perfect for fermentation temps.
Dimensions:
Tank Height: 32.38"
Foot Height: 1.5"
Depth (Front and Back): 17.25"
Width: 13.50"
Batch Size: 5 Gallons
Tight temperature control is a vital part of creating quality beer. That’s why our Fermenator™ Jackets ensure even temperatures, minimal condensation, and top-notch energy efficiency. From the reflective radiant barrier to the thick closed cell foam insulation, you won’t find better performing jackets anywhere!
Please Note: These jackets are only compatible with the F3 Fermenator™. They are not compaible with the G4 Fermenator™.
Take full control of your fermentation with the Fermenator™ G4 – Cooling System from Blichmann Engineering. Specifically designed for use with our Fermenator™ G4 Conical Fermenters, this system gives you precise fermentation temperature control — a key factor in producing consistent, high-quality beer, cider, and other fermented beverages. Built by brewers, for brewers, it’s the reliable solution your fermentation process needs.
Designed for Performance and Cleanability
The heart of this fermenter cooling system is a 304 stainless steel cooling coil. It’s easy to clean, resists corrosion, and is made for long-term use. The coil features max flow technology to keep your cooling liquid circulating smoothly and evenly, improving chill efficiency and stability. A tri-clamp port makes setup fast, secure, and sanitary — just clamp it into place and connect your chilling lines.
Whether you’re lagering at 50°F or keeping an ale steady in summer heat, this system gives you pro-level temperature control in any season. It works seamlessly with glycol chillers or other cooling setups, making it a flexible solution for both homebrewers and pilot-scale pros.
Fits All G4 Fermenter Sizes
We offer four models of the Fermenator™ G4 – Cooling System, each tailored to match our fermenter lineup: 7-gallon, 14-gallon, 19-gallon, and 1 BBL. The 1 BBL model is especially popular with startups and nano-breweries for its reliable performance and scalability. Whether you’re just starting out or scaling up, there’s a fit for your fermenter.
Take precise temperature control to the next level with the Fermenator™ G4 Cooling Jacket. Designed specifically for the Fermenator G4 Conical Fermenter—perfect for lagers, sours, and precision ales. Durable, easy to clean, and made for brewers who demand pro-level fermentation control.
This jacket is included with the Blichmann G4 Fermenator™ Cooling System.
Upgrade your Fermenator™ G4 Fermenter’s mobility with the G4 Caster Kit™. This optional add-on includes durable casters and front/rear-mounted handles for smooth and effortless movement. Working on uneven or rough surfaces? Add the caster extension frames for enhanced stability and confidence wherever you roll.
