Beer Brewing Equipment & Supplies

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 3" Outer Diameter - 3.56"  

Read more less

Power Adapter from Blichmann Engineering. 1.25 ft in length. 6-30P.

Read more less

Stainless steel 3/8" BSP washer. KegLand Part Number: KL13581  

Read more less

Designed to allow the use of older FTSs pumps and heaters with new FTSs Touch controller.

Read more less

This is a 1/6" DIN Relay Output controller with PID. It is compatible with many probe types including our PT100s. This reads Celsius only. 220V supply.  

Read more less

Due to the integrated PT100 thermo probe, our RIMS units are only compatible with Ss Brewtech eControllers Our Recirculating InfuSsion Mash System (RIMS) features a 3500w Incoloy 800 helical element with a thermoprobe integrated into the base which is designed to read wort temperature as it leaves the RIMS housing.  When used with an InfuSsion Mash Tun, the system is designed to provide the brewer the temperature gradient between mash and recirculating wort, allowing the perfect pump speed to be dialed in.   The RIMs kit includes a fully welded housing with TC connections, silicone base, and neoprene insulating jacket.  For stabilization and control in a multi-step mash process there is simply not a better system on the market.   Connectivity was an important consideration for our eBrewing Systems, we wanted the flexibility and familiarity of a plug that could be adapted to an existing customer setup, and the reliability of a UL approved connector type.  For the 240VAC element connector, we settled on the common NEMA L6-30 standard, which is a 3-wire twist-lock plug type, capable of delivering 30 amps of current.  Finally, for the PT100 temperature probes we opted for the 3.5 mm mini jack connector standard, commonly used for headphones, which is both durable and easy to use. 3500w Incoloy 800 Helical Element w/ integrated thermoprobe Sanitary TC Connections Neoprene Insulation Jacket NEMA L6-30 Plug 240VAC

Read more less

The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time. The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system.  By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure.  Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy.  Buy only the components you need and save money!  And the BrewEasy is the only system offered in electric and propane models! How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process.  While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort.  And the optional BrewCommander can automate it all! What's Included? Electric Heated System 30 Gallon Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings 30 Gallon Boil Kettle BoilerMaker Kettle (with G2 valve) BoilCoil holes (in R1 location) BrewEasy kit BoilCoil and cord BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump   Gas Heated System Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings Boil Kettle BoilerMaker Kettle (with G2 valve) BrewEasy kit BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump HellFire burner   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time. The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system.  By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure.  Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy.  Buy only the components you need and save money!  And the BrewEasy is the only system offered in electric and propane models! How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process.  While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort.  And the optional BrewCommander can automate it all! What's Included? Electric Heated System 15 Gallon Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings 20 Gallon Boil Kettle BoilerMaker Kettle (with G2 valve) BoilCoil holes (in R1 location) BrewEasy kit BoilCoil and cord BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump   Gas Heated System Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings Boil Kettle BoilerMaker Kettle (with G2 valve) BrewEasy kit BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump HellFire burner Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

American Gas Association certified for gas service. Body and stem are brass. Ball is chrome-plated brass.1/2" fpt on both sides.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets the passionate homebrewer's desire for customization. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware, including heating elements, valves, thermowells, and clamps, must be purchased separately to build your desired brewing system. Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Enhanced Cooling & Clarity: Includes an innovative jacketing system for efficient cooling and a welded tangential arm for enhanced whirlpooling, ensuring clear wort transfers and maximum hop utilization. SlingBlade Heating Element: Ultra-low watt density element heats efficiently without obstructing other kettle accessories. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Elevate your homebrewing craft with BrewBuilt Boil Kettles – where professional-grade design meets passionate homebrewers. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our Boil Kettles feature an innovative jacketing system for effective cooling, helping you reach desired temperatures more quickly and precisely. They also include a welded tangential arm for optimal whirlpooling, ensuring clear wort transfers and maximum hop utilization. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. These kettles are also designed to work hand-in-glove with the included SlingBlade Heating Elements, offering seamless integration for electric brewing setups. Power cord or controller must be purchased separately. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Elevate your brewing experience with BrewBuilt Boil Kettles, designed for the serious homebrewer. Major Features for Brewers: High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Jacketing System for efficient heating Welded Tangential Arm for superior whirlpooling High Quality sanitary welded TC Ferrules SlingBlade Electric Heating Element(s) (240V) Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Loaded Boil Kettle Includes: Jacketed Bottom Drain Boil Kettle with Tangential Arm SlingBlade Heating Element(s) Thermowell Butterfly Valves TC Clamps and Gaskets Notched Lid with TC CIP Port Feet SlingBlade Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 20 & 30 gal element 50-gallon kettle requires 2 x 30 amp circuits Includes 2 x 5750 Watt elements Wattage: 10 gal - 3750 Watts 15 gal - 4500 Watts 20 gal - 5000 Watts 30 gal - 5750 Watts Please Note: The kettle does not include a power cord for the heating element. You will need to purchase a power cord or your preferred element controller separately. Warning: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.

Read more less

This is an extension that fits onto the Blichmann 55 Gallon BoilerMaker kettles. It has the G2 finish, matching their newest line of kettles. Using this extension, the 55 gallon BoilerMaker nearly doubles its volume to top out at slightly over 100 gallons! Comes with a gasket for a watertight seal between the BoilerMaker Kettle and its Extension. The extension comes with a sight gauge marked up to 100 gallons, and the original lid for your BoilerMaker will fit right on top. This is designed for 2 BBL batches, and is a great option for someone who wants to expand capacity without starting over with a new Brew Stand and set of kettles! We've found that using a StarSan solution around the gasket / 55 gallon kettle top helps to get the extension into the kettle.  NOTE - Does not come with 55 Gallon Kettle in picture. This is just for the extension (top half).  You will also need the Extension Removal tool to use this unit.

Read more less

The 7.5 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning.  This US made single piece construction pot carries a lifetime limited warranty.  From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness.  The BoilerMaker™ G2 is clearly in a class of its own. All the items you need come standard, installed, and ready to use on the G2 Brew Pot: Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom* Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator!  All of our pots perform consistently and flawlessly with homebrewers in mind Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free. Cool touch silicone grip makes handling under fire easy. Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience Improved surface finish hides finger-prints and cleans impeccably.  Sleek brush on the outside and a silky smooth satin finish on the inside. Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports.  Much easier and more accurate than internal graduations.  It will also act as a mash manometer and warn you of impending stuck mashes! Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom! Handle orientation that makes carrying easier and lid storage on the pot handle. Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch. Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting. A great way to start with high-quality equipment equipped with all the options.

Read more less

Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1.5" T.C. ports to attach your preferred 1.5" tri-clamp fittings Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP50). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1.5" tri-clamp ports can be used to attach barbs, quick disconnects, camlocks, or any 1.5" tri-clamp fittings you prefer. KegLand Part Number: KL36924

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! These systems will ship via freight with lift gate to anywhere in the contiguous United States. There is a $500 flate rate fee for shipping from the manufacturer which is already priced into the cost of the system. 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   2 - 240V BoilCoils™ Less than 30 W/in² nearly half of the typical ultra low watt density for easier cleaning and scorch free brewdays. Each BoilCoil™ is engineered to preform optimally in your BoilerMaker™ G2 brew kettle for consistent heating performance, boil quality, and boil-off rates. Robust stainless steel construction. Less than ultra low watt density means NO chance of scorching when used as directed. The 240v BoilCoil™ includes a 12 ft factory wired cable with a molded twist lock L6-30P plug. Removable custom engineered plug means cleaning is a snap.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.  

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! These systems will ship via freight with lift gate to anywhere in the contiguous United States. There is a $500 flate rate fee for shipping from the manufacturer which is already priced into the cost of the system. 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   3 - HellFire™ Burners 140,000 BTU/hr at full power, 80,000 BTU/hr in efficiency mode (50% power setting). Patent pending clip-on heat shield. Infinitely adjustable kettle retaining bars accommodated kettles up to 19.75" in diameter. Non-rusting, fume free heavy gauge stainless frame.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Gas Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.

Read more less

If you want a top of the line, electric, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The HERMS-style system comes in 5 different batch sizes listed above. The system comes with 3 Boilermaker kettles (2 electric) with 240 v BoilCoils, 2 Riptide Brewing Pumps, 2 Tower of Power Controllers, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. Blichmann's BoilCoil are engineered to perform at their best in the Boilermaker kettles. They'll provide consistent heating, boil quality, and boil-off rates. The BoilCoil has an ultra low watt density making scorching impossible when used properly. Made from stainless steel and with an easily removable plug to clean. The Tower of Power temperature controllers give you precise control over the temperature of your mash and your boil. They come mounted to the table for your convenience. They provide PID temperature control with a Class A precision RTD temperature sensor, all in a compact, brushed stainless enclosure. These systems will ship via freight with lift gate to anywhere in the contiguous United States. Features: 3 - Boilermaker Kettles (2 Electric) Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles 1 BBL size includes 3 - 55 gallon kettles   2 - 240 v BoilCoils Each BoilCoil is built for the Boilermaker kettles so you can count on consistent heating performance, boil quality, and boil-off rates. The BoilCoils have less than ultra low watt density meaning there is no chance of scorching when used properly Made from stainless steel Cleaning is easy with the removable plug The 240 v Coil includes a 12 ft cable with a molded twist lock L6-30P plug   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - Tower of Power Temperature Controllers PID Temperature Control On/Off/Auto mode selector Class A precision RTD temperature sensor Digital power control to meter the intensity of the heating element from 0-100% Controllers come mounted to the table for ease of use Compact, brushed stainless enclosure *1 BBL Size comes with 2 x Tower of Power Dual Element Controllers   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10/15 gallon size - 72 in L x 24 in W x 25 in H 20 gallon and 1 BBL size - 96 in L x 30 in W x 24 in H Please Note: The assembly video below uses the RIMS system as an example.

Read more less

Designed to mount an eController to a Brew Cube. Additionally, the Side Shelf which measures 270mm x 270mm can be use to hold a RIMS or other accessory. Please select your controller size as the mounting plates are different widths. *3V Mount shown in photo

Read more less

The Brew Cube | Hose Hanger is designed to be mounted to the side of a Brew Cube and used to hang hoses and other accessories from the Brew Cube. Includes mounting hardware. The Garden Hose Hanger can be used to coil up a garden-style hose for easy brew day access. The U-Hook Hose Hanger can be used to rest accessories like tubing, mash paddles, and gloves.

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

This ball valve with male and Female Beer Thread (5/8" BSP) is incredibly handy for those wanting to shut off flow of liquid and gas lines on keg couplers or shanks. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. Made from 304 stainless steel. Kegland Part number: KL00406

Read more less

Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Designed for exceptional clarity and stability in beverage production, Filtrox 30" filter cartridges offer a high-performance solution for small to large-scale operations. Engineered with a large filtration surface area and robust construction, these cartridges are ideal for critical stages like pre-filtration and polishing of wine, beer, spirits, juices, and more. Filtrox cartridges ensure the removal of haze-forming particles and yeast, leading to a sparkling final product with a longer shelf life and maintained flavor integrity. Specs: Clarox® PL 30 Retention Rate: 3.0 Micron Efficiency: 99.98% Maximum Pressure Differential: 72.5 psi (5 Bar) @ 77°F (25°C) Maximum Continuous Operating Temperature: 149°F (65°C) Typical Flow Rate: Beer: 400 gal/h/30" (1,514 L/hr/30") Wine: 530 gal/h/30" (2,006 L/hr/30") Water: 920 gal/h/30" (3,482 L/hr/30")  

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 0.5 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. Pads rated 0.5 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only a cartridge filter can do so. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Fibrafix AF 130 Filter Sheets

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 4 Micron rating are for general polishing of wines that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 4 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Versafix XE 44 Filter Sheets

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. 16" filter module for use with 16" stainless steel lenticular filter housings 0.45 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Fibradisc AF 130 Filter Module Wine Use: General sterile filtration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration Max. Recommended Flow Rate: 334  gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 114 gal/hr (432 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar) Please Note: The filter module, lacking a PES layer, is for clarification purposes only and does not provide sterile filtration for 100% bacteria removal.

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 104 Filter Module Wine Use: Sterile filtration dry wine Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 - 22 psi (1.2 - 1.5 Bar) Cold Brew Coffee Use: Very fine, sterile filtration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 104 Filter Module Wine Use: Sterile filtration dry wine Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 - 22 psi (1.2 - 1.5 Bar) Cold Brew Coffee Use: Very fine, sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 34 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 143 - 167 gal/hr (540 - 630 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

Replacement foot for the Buon Vino Super Jet Filter (FIL10)

Read more less

Heavy-duty hose clamp suitable for 2-3/4" to 3-5/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel Strong stainless screw clamp that fits tubing with outer diameter between 2.75 and 3.625 inches.

Read more less

Brass - 3/8'' Flare Nut

Read more less

Brass reducing bush. 1/2" BSPP x 3/4" BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL26338

Read more less

1/4" NPT hex nut made from stainless steel.  

Read more less

Replacement power cord with NEMA 5-15 Plug x Wire Leads. 125V AC.

Read more less