Beer Brewing Equipment & Supplies

The Chilling Coil kit can be used to update the 14 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off 3/8" hose barbs on the chiller coil Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 30"H x 16.5"W x 16.5"D (on Bucket) Assembled Weight: 30lbs / 13.5kgs (on Bucket)

Read more less

Replacement LCD control panel for the RAPT Fermentation Chamber. This Replacement LCD screen has been flashed with the firmware for the RAPT Temperature Controller. It is not compatible with the RAPT Temperature Controller. KegLand Part Number: KL17091

Read more less

Replacement Main Circuit Board for RAPT Fermentation Chamber KegLand Part Number: KL17084

Read more less

This is a 1/6" DIN Relay Output controller with PID. It is compatible with many probe types including our PT100s. 220V supply.  

Read more less

This is a 1/6" DIN Relay Output controller with PID. It is compatible with many probe types including our PT100s.

Read more less

Tired of your digital controller laying awkwardly in the way? Now there is a solution - hang it up! Our hanger screws into a vertical surface and allows you to hang the controller. The hanger bracket features two posts that fit the mounting holes that are a part of the Ranco Controller. This allows you to hang the unit when in use and the remove the unit when you want to clean. This can be handy when you are cleaning with water and could potentially get the controllers wet. Use it to hang your controller on a refrigerator, fermenter stand, brew system, or whatever else you have dreamed up. This is a custom piece made by MoreBeer!

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, heaters, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access. 2" TC dump and racking valves. BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 66.1" Max height w/o acc.: 74" Packaging size: 70.8" (h) x 28.3" (w) x 28.3" (d) Net weight: 167.1 lbs Gross weight: 209.4 lbs Tank diameter (inside): Ø23.6" Gross volume: 81.8 gal Max rec. volume: 76.6 gal Min rec. volume: 31.7 gal Volume, cone: 10.5 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-4" 1 pcs TC blind cap, 4" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 4" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 4" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

TWO - 240VAC 30AMP GFCI Dedicated Circuits Required Designing every piece of our electric brewing equipment from scratch has enabled us to introduce a new level of process control, flexibility, and performance.  Every detail has been carefully thought through and refined. Every component of our new eControllers were designed in house or selected to enhance the ebrewing experience.  Beginning with the custom extruded 6061 aircraft-grade aluminum housing, which is CNC machined, and then coated in a durable black anodized finish. Using this approach allowed us to keep the system compact, portable, and functional.  The housing includes an integrated carry handle for easy setup and take down, a tee-slot for alternative mounting options, along with a heatsink to keep the internal electrical components cool. The boilkettle output on the eController is driven by a fully proportional PID controller, which doesn't rely on high speed switching to modulate heat.  Instead, voltage is modulated through an internal SSVR, this means element wattage is proportional.  A switch located just above the PID allows the user to operate the controller in manual or automatic modes. In manual mode, the proportional output can be fine-tuned on a scale of 0-100% of total element output which is ideal for dialing in a perfect rolling boil.  Alternatively, in automatic mode, the PID algorithm manages the proportional output relative to process temperature, to hold a steady HLT or mash temp for instance.  The eController quickly finds equilibrium with environmental heat loss characteristics, and can maintain a high degree of accuracy during each brewing process. The heater button allows the user to cycle the element on or off without shutting down the power to the entire unit, or adjusting the PID output setting, which is especially helpful during the occasional boil-over. This feature also allows the controller to be used to monitor a process temperature, such as during runoff or latter stages of the sparge process without the risk of dry firing the element.  Lastly, the controller features two accessory outputs, which would commonly be used for pumps, but could also be used for a mill, lighting, or even a phone charger. Connectivity was an important consideration for our eControllers, we wanted the flexibility and familiarity of a plug that could be adapted to an existing customer supplied kettle or element, and the reliability of a UL approved connector type.  For 240VAC main power and element connectors, we settled on the common NEMA L6-30 standard, which is a 3-wire twist-lock plug type, capable of delivering 30 amps of current.   For the accessory connections, we settled on using a NEMA 5-15 standard, which is just a standard residential 120 VAC outlet.   Finally, for the PT100 temperature probes we opted for the 3.5 mm mini jack connector standard, commonly used for headphones, which is both durable and easy to use. Extruded Anodized 6061 Aluminum Housing Omron Proportional PID Controller Automatic and Manual Modes On/Off Element control PT100 temperature probe (2) 120 VAC Accessory receptacles TWO - 240VAC L6-30 Plugs (2) discreet 30A GFCI circuits required TWO - 240VAC 30AMP GFCI Dedicated Circuit Required Designed to be used with Ss Brewtech eKettles and RIMS. Use with other heating elements, especially (but not limited to) those of different wattages, can cause damage to the eController not covered under the warranty policy.

Read more less

Designing every piece of our electric brewing equipment from scratch has enabled us to introduce a new level of process control, flexibility, and performance.  Every detail has been carefully thought through and refined. Every component of our new eControllers were designed in house or selected to enhance the ebrewing experience.  Beginning with the custom extruded 6061 aircraft-grade aluminum housing, which is CNC machined, and then coated in a durable black anodized finish. Using this approach allowed us to keep the system compact, portable, and functional.  The housing includes an integrated carry handle for easy setup and take down, a tee-slot for alternative mounting options, along with a heatsink to keep the internal electrical components cool. The eController is driven by a fully proportional PID controller, which doesn't rely on high speed switching to modulate heat.  Instead, voltage is modulated through an internal SSVR, this means element wattage is proportional.  A switch located just above the PID allows the user to operate the controller in manual or automatic modes. In manual mode, the proportional output can be fine-tuned on a scale of 0-100% of total element output which is ideal for dialing in a perfect rolling boil.  Alternatively, in automatic mode, the PID algorithm manages the proportional output relative to process temperature, to hold a steady HLT or mash temp for instance.  The eController quickly finds equilibrium with environmental heat loss characteristics, and can maintain a high degree of accuracy during each brewing process. The heater button allows the user to cycle the element on or off without shutting down the power to the entire unit, or adjusting the PID output setting, which is especially helpful during the occasional boil-over. This feature also allows the controller to be used to monitor a process temperature, such as during runoff or latter stages of the sparge process without the risk of dry firing the element.  Lastly, the controller features two accessory outputs, which would commonly be used for pumps, but could also be used for a mill, lighting, or even a phone charger. Connectivity was an important consideration for our eControllers, we wanted the flexibility and familiarity of a plug that could be adapted to an existing customer supplied kettle or element, and the reliability of a UL approved connector type.  For 240VAC main power and element connectors, we settled on the common NEMA L6-30 standard, which is a 3-wire twist-lock plug type, capable of delivering 30 amps of current.   For the accessory connections, we settled on using a NEMA 5-15 standard, which is just a standard residential 120 VAC outlet.   Finally, for the PT100 temperature probes we opted for the 3.5 mm mini jack connector standard, commonly used for headphones, which is both durable and easy to use. Extruded Anodized 6061 Aluminum Housing Omron Proportional PID Controller Automatic and Manual Modes On/Off Element control PT100 temperature probe 240VAC L6-30 Plugs 30A GFCI circuit required (2) 120 VAC Accessory receptacles 240VAC 30AMP GFCI Dedicated Circuit Required Designed to be used with Ss Brewtech eKettles and RIMS. Use with other heating elements, especially (but not limited to) those of different wattages, can cause damage to the eController not covered under the warranty policy.

Read more less

Effortless Grain Removal: Simply attach the stainless steel chute to the integrated grain door on your BrewBuilt Dish Bottom Mash Tun for a clean and controlled way to empty spent grains directly into a bucket. Mess-Free Brewing: This essential upgrade eliminates spills and reduces cleanup time, ensuring a quicker and more efficient post-brew day process. Durable and Sanitary Design: Constructed from durable, food-grade stainless steel, the grain chute is built to last and is easy to clean, maintaining a sanitary environment for your brewing process. Tired of messy grain removal? The BrewBuilt Grain Chute is the essential upgrade for your BrewBuilt Dish Bottom Mash Tun. Designed to fit the integrated grain door, this chute provides a clean and controlled way to remove spent grains. Simply attach the stainless steel chute to the grain door and use a rake or paddle to push the grain directly into a bucket or disposal bag. This simple addition eliminates spills on the floor, reduces cleanup time, and makes grain removal quick and efficient. Crafted from durable, food-grade stainless steel, the BrewBuilt Grain Chute is built to last and easy to clean. Get yours and make your next brew day a little less messy.

Read more less

Eliminate Steam and Condensation: The condenser's continuous flow of cool water captures and converts hot steam back into a liquid that can be easily drained, keeping your brewing area dry and free of moisture damage. Simple, Secure Connection: The condenser attaches directly to a 2" TC port on your BrewBuilt Domed Lid, creating a fully contained, steam-free brewing system. Durable, Sanitary Construction: Made entirely of stainless steel with a tri-clamp connection, this high-efficiency unit is built to last and provides a clean, secure way to get a full rolling boil anywhere. Brew indoors without the worry of moisture, mold, and humidity. The BrewBuilt Condenser is your ultimate solution for a steam-free brew day. This high-efficiency unit is designed to attach directly to the 2" TC port on your BrewBuilt Domed Lid, turning your kettle into a fully contained system. Using a continuous flow of cool water, the condenser captures and converts hot steam back into liquid, which can then be drained away. Its durable all-stainless steel construction and tri-clamp connection provide a clean, secure way to eliminate steam and its associated cleanup. Now you can get a full, rolling boil anywhere—without turning your brewery into a sauna.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with the BrewBuilt Dish Bottom Kettle, specifically designed as the perfect mash tun. This professional-grade kettle is meticulously crafted from high-quality 304 stainless steel, ensuring durability and a lifetime of flawless brews. Experience the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. This specialized BrewBuilt Kettle features a convenient grain door, making the removal of spent grains incredibly easy and efficient. High-quality sanitary welded TC Ferrules provide a lifetime of leak-free use and make sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettle is raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom mashing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Mash Tun. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Grain Door for easy removal of spent grains High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.  

Read more less

11.5 ft. extension cord for Blichmann 120V Power Controller (BL994). Note: 240V cord pictured.

Read more less

These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs! The hole in the top left of our picture is designed for use with the dip tube that is part of every BoilerMaker Kettle. Click on the second picture there to get a better view of how the screen would look setup with the dip tube! Please Note: This false bottom is designed to work with both G1 and G2 models of Blichmann Boilermakers.

Read more less

Designed to mount a pump to Brew Cube | Perforated Shelves. The plate is designed with two pump mounting patterns: 66.68mm x 60.20mm | Fits Chugger Pump and other home brew pumps 93.41mm x 71.91mm | Fits Chugger Max Pump

Read more less

Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (40) 40cm x 40cm plates 4,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 4,000L (1,056 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 40 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 67.7" x 26" x  x 35.5" 518 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE Compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon. Warning: You will need to remove the unit from the shipping pallet using a forklift and straps. Do not use a fork lift to directly lift from the bottom of the unit. Doing so may damage the bottom tray.

Read more less

Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (20) 40cm x 40cm plates 2,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 2,000L (528 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 20 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 47.5" x 26" x 35.5" 363 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon.

Read more less

Traditional design meets modern technology and materials Oval design allows for unhindered convection currents during fermenation Supports constant circulation—eliminating hot spots and leading to faster fermentations Smooth interior surface makes cleaning quick & easy Made in Germany by Speidel  The Fermentegg represents a new take on one of the oldest vessel shapes for winemaking. Oval vessels have been used to ferment and store wine for thousands of years, however Speidel's Fermentegg brings this concept to modern times with a lightweight yet heavy duty, food-safe polyethylene construction. The egg shaped vessel results in convection currents during fermentation, unhindered by corners or edges. This movement results in your beer or wine constantly circulating, with an end result of a more complex, yet unified product. Fermentations will generally complete quicker due to the motion of the product, and hot spots will be eliminated as the product remains at a homogenous temperature. Can be used to ferment wine, beer or even cider! Speidel has become known as a forward moving company in fermentation equipment and following in the foot steps of the Speidel Plastic Fermenter, the egg is very easy to clean because of it's smooth inside surface. Specifications: 60 l Capacity Height: 79 cm Width: 48 cm 44 lb Lid has a 38 mm hole which can be utilized for use with the Speidel Red Rubber Stopper and Airlock 2 x 3/4" BSPP stainless steel ball valves Included   Please Note: these vessels are recommended for primary fermentation and short term aging only. They are not pressurizable and may experience oxygen ingress if used for long term storage or prolonged aging.  

Read more less

Stainless steel pump with food-grade plastic impeller with for moving wine or beer 1.5" tri-clamp connections 13 gallons per minute flow rate Made in Italy by Marchisio This pump features a stainless body, housing, and bracket. It utilizes an impeller made from food-grade plastic. The impeller does not push air by itself so to prime it you unthread the priming nut on top of the filter housing and fill with water or wine. Comes with 1.5" T.C.  inlet and outlet. Has a .8 hp motor and moves 13 gallons per minute with no head. Will pump up to a height of 70'. 110v. Overall dimensions are 14.5" L x 7"W x 7"H. Weighs 15.4 lbs. Optional by-pass can be installed to restrict flow up to 25%.  This pump can handle some small solid particulate, such as grain particles, and is food grade up to 113° F. Please note the instruction manual references 230V for the voltage, but these pumps are custom configured by the manufacturer in 110V.  

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks 500 L size has 2 racking ports, one equipped w/ a Spigot, one covered with a cap. 46"L x 28"W x 43"H, 46.3 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks 36"L x 25"W x 36"H, 26.46 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks 32"L x 22"W x 32"H, 19.84 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks. 22"L x 16"W x 22" H, 8.82 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Traditional design meets modern technology and materials Oval design allows for unhindered convection currents during fermenation Supports constant circulation—eliminating hot spots and leading to faster fermentations Smooth interior surface makes cleaning quick & easy Made in Germany by Speidel  The Fermentegg represents a new take on one of the oldest vessel shapes for winemaking. Oval vessels have been used to ferment and store wine for thousands of years, however Speidel's Fermentegg brings this concept to modern times with a lightweight yet heavy duty, food-safe polyethylene construction. The egg shaped vessel results in convection currents during fermentation, unhindered by corners or edges. This movement results in your beer or wine constantly circulating, with an end result of a more complex, yet unified product. Fermentations will generally complete quicker due to the motion of the product, and hot spots will be eliminated as the product remains at a homogenous temperature. Can be used to ferment wine, beer or even cider! Speidel has become known as a forward moving company in fermentation equipment and following in the foot steps of the Speidel Plastic Fermenter, the egg is very easy to clean because of it's smooth inside surface. Specifications: Height: 120 cm Width: 76 cm Lid has a 38 mm hole which can be utilized for use with the Speidel Red Rubber Stopper and Airlock Includes 2 x 1" Male BSPP stainless steel ball valves (H632B recommended for adapting)   Please Note: these vessels are recommended for primary fermentation and short term aging only. They are not pressurizable and may experience oxygen ingress if used for long term storage or prolonged aging.  

Read more less

This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.  

Read more less

This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.  

Read more less

Designed for exceptional clarity and stability in beverage production, Filtrox 30" filter cartridges offer a high-performance solution for small to large-scale operations. Engineered with a large filtration surface area and robust construction, these cartridges are ideal for critical stages like pre-filtration and polishing of wine, beer, spirits, juices, and more. Filtrox cartridges ensure the removal of haze-forming particles and yeast, leading to a sparkling final product with a longer shelf life and maintained flavor integrity. What is the PES Layer? The Polyethersulfone (PES) layer is a high-performance membrane designed to deliver absolute filtration and exceptional product clarity. Key Benefits for Beverage Production Absolute Filtration: The PES layer provides a precise and reliable barrier, capturing 99.99% of haze-forming particles, yeast, and bacteria to guarantee a consistent, sparkling final product. Maintains Quality: With its low protein-binding properties, the PES membrane ensures that the color, flavor, and aroma of your beverage remain unchanged. Durable & Efficient: Resistant to high temperatures and chemicals, this layer is built for demanding production environments. Its high flow rate and large dirt-holding capacity extend the life of each cartridge, reducing downtime and replacement costs. Specs: Clarox® MP/W 04 Retention Rate: 0.45 Micron Bacterial Retention: >1.0 × 1010/cm2 Leuconostoc oenos Maximum Pressure Differential: 72.5 psi (5 Bar) @ 77°F (25°C) Maximum Continuous Operating Temperature: 149°F (65°C) Typical Flow Rate: 198 gal/h/30" (750 L/h/30")  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Lenticular filters employ a filtering process similar to plate filters but are significantly easier to use A sealed system ensures there is no dripping/leakage, unlike what occurs with plate filters Filters are stacked within cartridges, making loading and replacement much simpler than a plate filter Housings can be loaded with as few as one filter cartridge with the use of optional center posts BevBright Lenticular Filter Housings streamline the filtration process, making it as effective as traditional plate filters but with greater ease of use. Their user-friendly design ensures that anyone, from experienced professionals to beginners, can operate them effortlessly. The setup is straightforward and without the complexities associated with plate filters. One of the key benefits of lenticular filters is their sealed system. This design prevents dripping and leakage, guaranteeing airtight integrity and ensuring that your liquids remain protected and uncontaminated. Filters stack neatly within the housing, and loading or replacing them is simple. There are no intricate assemblies required. Whether performing maintenance or adjusting filtration levels, the process is seamless and hassle-free. Optional center posts allow the housings to accommodate as few as one filter cartridge, providing flexibility for various filtration needs, from large-scale production to small-batch operations. Choose BevBright stainless steel lenticular filter housings for a filtration solution that is efficient, reliable, and easy to use. Each unit comes complete with hardware and instructions, ready for immediate use. Made from 304 Stainless Steel Polish: Ra<0.4um Hardware Included: (2) 1.5" T.C. Pressure Gauges (2) 1.5" T.C. Butterfly Valves (1) 1.5" T.C. Tee (1) Top Relief Valve (1) 1.5" T.C. Drain Valve Clamps & Gaskets

Read more less

Premium 316 stainless steel construction ensures durability and corrosion resistance, ideal for demanding beverage production environments Wide compatibility with a range of filter cartridges offers adaptability and customization for optimal filtration results in beverage making processes Multiple housings easily work in tandem for sequential filtration with cartridges of different micron ratings, ensuring thorough removal of bacteria for pristine final products The BevBright 30" Stainless Cartridge Filter Housings are designed to streamline your beverage production with unmatched purity and efficiency. Made from premium electropolished 316 stainless steel, these filter housings protect against contamination, ensuring your final product meets the highest standards of quality and taste. Engineered to resist corrosion in challenging environments, they offer durability and reliability. These stainless steel filter housings are essential for precision filtration in beverage production. When used with a sterile filter cartridge, they effectively remove yeast and bacteria, delivering pure, pristine liquid. Tri-clamp ports ensure easy integration into your setup, and the option to daisy-chain filters allows for efficient multi-stage filtration, prolonging the life of your sterile cartridges. BevBright filter housings are compatible with a wide range of filter cartridges, providing the flexibility to meet your specific filtration needs, from standard to sterile filtration. Each unit comes complete with hardware and ready for immediate use. Trust BevBright 30" Stainless Cartridge Filter Housings to maintain the purity and excellence of your beverage from start to finish. Made from 316 Stainless Steel Polish: Ra<0.4um Hardware Included: (2) 1.5" T.C. Pressure Gauges (2) 1.5" T.C. Butterfly Valves (1) 1.5" T.C. Tee (1) Top Relief Valve (2) 1/2" T.C. Drain Valves Clamps & Gaskets Compatible with Scott Labs' ScottCart Code 7: 226 Twist & Lock 30" Cartridges Example images shown. The Filter Housing also includes a 1.5" T.C. Tee & Pressure Gauge and 1/2" T.C.Drain Valves that are not pictured.

Read more less

Lenticular filters employ a filtering process similar to plate filters but are significantly easier to use A sealed system ensures there is no dripping/leakage, unlike what occurs with plate filters Filters are stacked within cartridges, making loading and replacement much simpler than a plate filter Housings can be loaded with as few as one filter cartridge with the use of optional center posts BevBright Lenticular Filter Housings streamline the filtration process, making it as effective as traditional plate filters but with greater ease of use. Their user-friendly design ensures that anyone, from experienced professionals to beginners, can operate them effortlessly. The setup is straightforward and without the complexities associated with plate filters. One of the key benefits of lenticular filters is their sealed system. This design prevents dripping and leakage, guaranteeing airtight integrity and ensuring that your liquids remain protected and uncontaminated. Filters stack neatly within the housing, and loading or replacing them is simple. There are no intricate assemblies required. Whether performing maintenance or adjusting filtration levels, the process is seamless and hassle-free. Optional center posts allow the housings to accommodate as few as one filter cartridge, providing flexibility for various filtration needs, from large-scale production to small-batch operations. Choose BevBright stainless steel lenticular filter housings for a filtration solution that is efficient, reliable, and easy to use. Each unit comes complete with hardware and instructions, ready for immediate use. Made from 304 Stainless Steel Polish: Ra<0.4um Hardware Included: (2) 1.5" T.C. Pressure Gauges (2) 1.5" T.C. Butterfly Valves (1) 1.5" T.C. Tee (1) Top Relief Valve (1) 1.5" T.C. Drain Valve Clamps & Gaskets  

Read more less

Lenticular filters employ a filtering process similar to plate filters but are significantly easier to use A sealed system ensures there is no dripping/leakage, unlike what occurs with plate filters Filters are stacked within cartridges, making loading and replacement much simpler than a plate filter Housings can be loaded with as few as one filter cartridge with the use of optional center posts BevBright Lenticular Filter Housings streamline the filtration process, making it as effective as traditional plate filters but with greater ease of use. Their user-friendly design ensures that anyone, from experienced professionals to beginners, can operate them effortlessly. The setup is straightforward and without the complexities associated with plate filters. One of the key benefits of lenticular filters is their sealed system. This design prevents dripping and leakage, guaranteeing airtight integrity and ensuring that your liquids remain protected and uncontaminated. Filters stack neatly within the housing, and loading or replacing them is simple. There are no intricate assemblies required. Whether performing maintenance or adjusting filtration levels, the process is seamless and hassle-free. Optional center posts allow the housings to accommodate as few as one filter cartridge, providing flexibility for various filtration needs, from large-scale production to small-batch operations. Choose BevBright stainless steel lenticular filter housings for a filtration solution that is efficient, reliable, and easy to use. Each unit comes complete with hardware and instructions, ready for immediate use. Made from 304 Stainless Steel Polish: Ra<0.4um Hardware Included: (2) 1.5" T.C. Pressure Gauges (2) 1.5" T.C. Butterfly Valves (1) 1.5" T.C. Tee (1) Top Relief Valve (1) 1.5" T.C. Drain Valve Clamps & Gaskets Please Note: Example images of the 12" / 3 High Lenticular Housing shown here. Updated images coming soon.

Read more less

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.7 Micron for ultra-fine polishing of beverages or for preparing hard to filter beverages to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 0.7 micron pads are for ultra-fine polishing of the beverage, or for preparing hard to filter beverages to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets Wine Use: Ultra-fine polishing Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Cold Brew Coffee Use: Very fine filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 1 Micron for fine filtration of wine, spirits, and beer Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 1.5 Micron Mid Point: 1 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 101 Plus2 Filter Module Wine Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 29 psi (1.5 - 2.0 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Very fine filtration, for long shelf life Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 71 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 6 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 41 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 190 gal/hr (720 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 8 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 5 - 12 Micron Mid Point: 8 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 31 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 286 - 334 gal/hr (1,080 - 1,260 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less