Products
-
Beer & Gas Quick Disconnect (QD) - 1/4 in. Barb x Female Shut-Off
Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease! These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N. In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.
$10.99
-
Beer & Gas Quick Disconnect (QD) - 1/4 in. Barb x Male Shut-Off
These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. For the female side, see our H550B.
$9.99
-
Beer & Gas Quick Disconnect (QD) - 1/4 in. MPT x Male Shut-Off
Works with our H550 series Quick Disconnects. This is a male Quick Disconnect with 1/4" MPT on the other side.
$7.99
-
Beer & Gas Quick Disconnect (QD) - In-Line Set (With Shut-Off)
Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines. Uses might include the following: * On a gas system to unhook your tank and regulator from your manifold so you take it with you. * On a beer line to easily switch between ball lock, pin-lock, or a commercial tap * On a counter-pressure bottle filler to be able to easily connect to your existing gas line. This plastic quick disconnect set features 1/4" barb which can be used with tubing ID 3/16" through 5/16". The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.
$16.99
-
Beer & Gas Quick Disconnect (QD) - Replacement O-Ring
O Ring for Beer & Gas Line QD (for H550A)
$0.69
-
Beer & Gas Tubing Quick Disconnect (QD) - 3/8 in. Barb x Male QD
Plastic quick disconnect with 3/8" barb which can be used with either 1/4", 5/16" or 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch on the female QD. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The o-ring is food grade buna-n. This is a non-valved QD. It does not have an internal shut-off like H550A. For the female side, see our H550B.
$5.99
-
Beer & Gas Tubing Quick Disconnect (QD) - 3/8" Barb x Female Shut-off
Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease! These quick disconnects feature 3/8" barbed fittings which can be used with 5/16", 3/8" or 7/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N. In short, these QDs are durable, user friendly and versatile. A no-brainer! This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.
$10.99
-
Beer Airlock Cleaning Brush With Straight Tip
Cleaning brush for airlocks and small parts. Features a "Straight Tip" so the bristles extend to the end, but not around the tip of the brush. This allows you to fit the brush into smaller areas than the rolled tip brush, such as in the center tube of airlocks, keg parts, and other areas with limited room. Includes a small metal loop on the handle for handing.
$3.79
-
Beer And Wine Hydrometer With Correction Scale
A definite upgrade over a standard hydrometer, this deluxe hydrometer also includes a built in thermometer that allows you to take both a gravity and temperature reading at the same time. It is a simple but key upgrade that you will be glad you have everytime you take a reading. Based on the temperature, an also built in chart then tells you how many points you need to add or subtract from your gravity to get a true reading. Accurate gravity readings are pretty key for consistent brewing. Like our basic model, this deluxe hydrometer also features three scales - Specific Gravity, Potential Alcohol and Brix (Balling).
$14.49
-
Beer Bottle 6 Pack Carrier
Give your homebrew that final touch: A six pack carrier that you can customize! With this white 6 Pack Carrier for glass bottles, you can give your homebrew a professional presentation. Simply create your own custom graphics and logo, then present it to your amazed family and friends! A great idea for gifts. White, for 12 oz bottles.
$1.79
-
Beer Bottle Brush for cleaning
This bottle brush design has stood the test of time. This traditional design Beer Bottle Brush, is perfect for cleaning 12 to 22oz beer bottles. If there is any stuck-on residue or dust in the bottom of your bottles the rounded end of the brush will reach in and scrub it out! Includes circular metal loop for hanging. Bristles are 2.75" in diameter with an overall length of 16"
$5.00 $4.39
-
Beer Bottle Label - Pack of 48
Now you can proudly display your homemade beer with your own custom label! With these unprinted sheets of adhesive labels you can easily create your own custom beer labels. The pre-cut labels come on 8-1/2 x 11"" sheets. You can download printing templates that will define the edges of the labels (as a table) so you can make your custom design fit the label. Once you’ve created your own design you print the labels with either inkjet or laser printer. The special adhesive will stay on while wet and during aging, but can easily be peeled off for reusing bottles. Beer labels come 6 per sheet, 8 sheets per pack, for a total of 48 labels. Blank templates for download: MS Word (.doc) PDF (.pdf)
$6.99
-
Beer Bottle Labels (2-Part) - Pack of 32
These 2-Part customizable beer bottle labels will give your homebrew a distinctive upscale look. With these unprinted sheets of adhesive 2-Part Labels you can easily create your own custom beer bottle labels. The pre-cut labels come on 8-1/2 x 11"" sheets. You can download printing templates that will define the edges of the labels (as a table) so you can make your custom design fit the label. Once you’ve created your own design you print the labels with either inkjet or laser printer. In order to add your designs to the template you must have a paid version of adobe acrobat reader or some other PDF editting software. The special adhesive will stay on while wet and during aging, but can easily be peeled off for reusing bottles. 2-part labels come 4 sets per sheet, 8 sheets per pack, for a total of 32 labels. Blank template for download: PDF (.pdf)
$6.99
-
Beer Bottles | Belgian/Champagne Style | Amber Glass Bottles | 16.9 oz | 500mL | Case of 12
Belgian or Sparkling style glass beer bottles High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine At 16.9 ounces, this is the perfect bottle size to pour a full pint glass Three cases of 12 bottles are enough to package a 4.75 gallons of finished beer 26mm crown cap finish These high quality 500 ml (16.9 oz) Belgian / Champagne style bottles can be capped with standard crown caps (26mm). Thicker than standard 12 and 22 oz bottles. Ideal for lambics and other styles that have higher volumes of CO2. 3 Cases will take 4.75 gallons of beer, roughly the amount needed for a 5 gallon batch. Bottle Specifications: Capacity: 500 ml Weight: 0.88 lb Height: 10.12 inches Outside Diameter: 2.87 inches Pressure Rating: Up to 4 volumes of carbonation. Shipping Details: Case: 12 Bottles Pallet Layer: 16 Cases Full Pallet: 64 Cases Weight: 11.75 pounds per case Case dimensions: 12"L x 9-3/8"W x 10-5/8"H
$19.99
-
Beer Bottles | Belgian/Champagne Style | Amber Glass Bottles | 25 oz | 750mL | Case of 12
Belgian or Sparkling style glass beer bottles High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine 750mL capacity makes them ideal of cellaring your most precious creations Two cases of 12 bottles are enough to package just over 4.5 gallons of finished beer 26mm crown cap finish. Can also be corked using a champagne style cork with cage These high-quality Belgian / Champagne style bottles can be capped with standard crown caps (26mm). Bottle Specifications: Capacity: 750 ml Weight: 1.5 lb Height: 11.9 inches Outside Diameter: 3.3 inches Pressure Rating: Up to 5.5 volumes of carbonation. Case: 12 Bottles Pallet Layer: 12 Cases Full Pallet: 84 Cases:
$26.99 - $1,929.99
-
Beer Bottles | Bomber | Amber Glass Bottles | 22 oz | Case of 12
Traditional Bomber glass beer bottles Perfect for splitting between two drinkers or sampling for a small group (or to simply cut down on bottling time!) Thick amber glass offers better protection against UV rays compared to green or clear glass Two cases of 12 bottles are enough to package just over 4 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps Pallet sku is 60 cases Traditional 22 oz longneck beer bottles, often referred to as "beer bomber bottles", take standard crown caps (26 mm). 12 bottles per case, with dividers. These bomber bottles are thicker and darker than most other bottles, offering better protection against UV rays and preventing your beer from becoming lightstruck. These bottles are used by the likes of Stone, Speakeasy, Drakes, Knee Deep and even Anheuser Busch. The displacement caused by a 3/8" bottle filler (B411) leaves the perfect amount of headspace in your bottle. Significantly reduce your bottling time by switching from 12 oz bottles to 22 oz bottles. Two cases of this classic beer bottle will house a standard 5 gallon batch of homebrew (you may need an extra bottle or two if you ended up with a full five gallons). Fits all standard (26 mm) pry-off and universal style crown caps. Don't forget your bottle caps. We stock over 10 different colors and styles of crown caps! Skip labelling your bottles by identifying them with colored crown caps. Bottle Specifications: Capacity: 22 fl. Oz. Weight: 1 5/8 lb Height: 11 inches Outside Diameter: 2.9 inches Pressure Rating: Up to 3 volumes of carbonation.
$16.99 - $499.99
-
Beer Bottles | Euro | Amber Glass Bottles | 16.9 oz | 500mL | Case of 12
Euro glass beer bottles At 16.9 ounces, this is the perfect bottle size to pour a full pint glass Thick amber glass offers better protection against UV rays compared to green or clear glass Three cases of 12 bottles are enough to package a 4.75 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps 26mm crown cap finish Our 500 ml beer bottles are perfect for your latest creation. 500 ml / 16.9 oz is the perfect size. Larger than a 12oz bottle, it will fill a pint glass to the rim but is not quite the commitment of a 22oz bomber bottle. Amber color. Accepts standard bottle caps. Very similar to but not exactly the same as the bottle used for Pliny The Elder. Bottle Specifications: Capacity: 500 ml Weight: 3/4 lb Height: 9 inches Outside Diameter: 2.8 inches Pressure Rating: Up to 3 volumes of carbonation.
$15.99 - $1,039.99
-
Beer Bottles | Traditional Longneck | Amber Glass Bottles | 12 oz | Case of 24
Traditional Norther American Longneck glass beer bottles Thick amber glass offers better protection against UV rays compared to green or clear glass Two cases of 24 bottles are enough to package a 4.5 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps 26mm crown cap finish Traditional 12 oz longneck beer bottles that take standard crown caps (26 mm). 24 bottles per case, with dividers. These bottles are thicker and darker than most other bottles, offering better protection against UV rays and preventing your beer from becoming lightstruck. These bottles are used by the likes of Stone, Drakes and even the big guys like Anheuser Busch. The displacement caused by a 3/8" bottle filler (B411) leaves the perfect amount of headspace in your bottle. Two cases of this classic beer bottle will house a standard 5 gallon batch of homebrew. Fits all standard (26 mm) pry-off and universal style crown caps. Don't forget your bottle caps. We stock over 10 different colors and styles of crown caps! Skip labelling your bottles by identifying them with colored crown caps. Bottle Specifications: Capacity: 12 fl Oz Weight: 0.425 lb Height: 9 inches Outside Diameter: 2.4 inches Pressure Rating: Up to 3 volumes of carbonation. Case QTY: 24 Pallet QTY: 48 Cases
$17.99 - $419.99
-
Beer Faucet & Tap Cleaning Brush
Two brushes in one! Get twice the use from one brush! This dual ended brush is designed for cleaning both your faucet and commercial tap. Cheers to one less piece of equipment to track down on Draft-Cleaning-Day. Now you can get your lines re-connected & flowing again faster. We’ll drink to that!
$4.49
-
Beer Faucet - Stainless Steel
This industry standard faucet will last a lifetime and will not taint beer flavor. All parts are constructed from stainless steel, which is a strong, food grade metal. Normal faucets wear down with time as the chrome plating wears off and your beer is then exposed to brass. Brass can cause metallic flavors in your beer that don't taste good! This is the first all stainless faucet that has been produced with an affordable price tag. Buy a stainless faucet today and know that you won't have to purchase another faucet in the future. You can also rest easy that your beer will taste just like the brewer intended. Will fit all North American shanks and towers making it a great replacement faucet. Quick lever action. Polished stainless finish.
$32.99
-
Beer Faucet Adapter (w/o Collar)
Beer Faucet Adapter (w/o Collar)
$6.09
-
Beer Faucet Bonnet Angler | Tap Handle Positioner | Chrome Plated Brass
Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.
$9.89
-
Beer Faucet Cleaning Brush
If you want to keep your draft faucets clean, you’ll dig this special brush dedicated specifically for the job. This brush is the right diameter to give the interior of your faucet a good scrub, and short enough to avoid being unwieldy. Ah, there’s nothing like the right tool for the job. About 3/4" diameter.
$3.69
-
Beer Faucet Line Cleaning Adapter
A must-have tool for any DIY draft-cleaning system, the Faucet Cleaning Adapter makes it a cinch to back-flush your draft lines for cleaning. Simply remove your draft faucet and mount the adapter in its place, leaving you with a 3/8” barb to connect tubing. Made from brass.
$8.79
-
Beer Faucet Lock | Perlick 630 Series
The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can potentially be a beer draining arrangement. When you leave for the weekend, stop the flow with a faucet lock. A quick easy locking system that attaches directly to the faucet. Specifically designed for Perlick 630 series draft faucets. For standard beer faucets, please see D1274.
$32.99
-
Beer Faucet Lock | Standard Type Faucets
Keep potential “beer-samplers” and kids out of your draft system with this Beer Faucet Lock. Give yourself some peace-of-mind, knowing that your draft system is locked and your beer is safe. If you're a serious homebrewer this thought has crossed your mind: the thought of someone walking by and pulling on the tap handle, letting beer run out. Be it friends or your kids, you want your system to be secure. This quick and easy Beer Faucet Lock attaches directly to the faucet. It gives a solid squeeze on the handle, locking it into place, without fear of damaging it. This one-of-a-kind lock is something you’ll be glad you own. Please note - this lock will not work with Perlick 650SS, 630SS or Intertap faucets
$32.99
-
Beer Faucet Parts | Ball Washer
Keep your draft faucet in perfect working order. Replace your old ball washer to keep your faucet lever moving properly This is the first washer of a two part set (D1200C) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the first washer of a two part set that is used to control motion of lever.
$0.89
-
Beer Faucet Parts | Brass Lever
Keep your draft faucet in perfect working order! If the lever gets stuck or is unused for a long time, it can break Replace it to keep using your favorite tap handle and keep the beer flowing! With this brass lever you can renew a worn-out part on your well-used draft faucet. This is the actual lever that opens and closes the faucet, and where the tap handle is threaded on. These levers can break if a faucet is left alone for too long and the lever gets stuck.
$3.49
-
Beer Faucet Parts | Coupling Nut
Keep your draft faucet in perfect working order. Replace your old coupling nut to keep your faucet firmly attached to your shank Knurled finish makes gripping easy With this faucet replacement nut you can renew a worn-out part on your well-used draft faucet. This replacement part is the nut that attaches the faucet to the shank. Knurled finish makes it easy to snug even with wet hands.
$3.49
-
Beer Faucet Parts | Friction Bonnet
Keep your draft faucet in perfect working order! Replace your old or broken friction bonnet to keep your fauce lever moving properly This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
$3.99
-
Beer Faucet Parts | Friction Washer
Keep your draft faucet in perfect working order. Replace your old friction washer to keep your faucet lever moving properly This is the second washer of a two part set (D1200D) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the second washer of a two part set that is used to control motion of lever.
$0.99
-
Beer Faucet Parts | Rebuild Kit
Fix your old, stuck, or leaky faucet with new washers! Most faucets that aren't working properly, just need a good cleaning and some new washers Fits most American beer faucets, including D1200, D1205, D1207, and D1215 Does not work on stout, forward sealing, or European faucets Fix an old faucet that is still functionally sound but is old, leaking or just hard to use. Fits our faucets D1200, D1205,D1207, & D1215 and 95% of all beer faucets ever made. Does not work on stout faucets, the sealed forward faucets, Perlick faucets, nor European faucets.
$3.49
-
Beer Faucet Parts | Stainless Lever
Keep your draft faucet in perfect working order. Does not react with beer Is stronger than brass With this stainless steel lever you can renew & upgrade a worn-out part on your well-used draft faucet. This is the lever that actually opens and closes the faucet, and that the tap handle attaches too. Stainless levers are used to replace broken brass levers because of their strength and ability to not react with beer.
$13.99
-
Beer Faucet Parts | Valve Shaft Seat
Keep your draft faucet in perfect working order. Replace the washer that seals the sliding shaft of your faucet to prevent leaks With this washer you can renew a worn-out part on your well-used draft faucet. This washer seals the sliding shaft, which often becomes brittle with age causing the faucet to drip.
$1.99
-
Beer Faucet Shank (Stainless) - 4 in.
This is the same shank that is used in our D1245A, but without the nipple and hex nut. This gives you the freedom to choose the size and style of tailpiece that fits your needs, as well as the type of hex nut and shank collar you prefer. Check below for available tailpieces. Be sure to add a gasket to use with your chosen tailpiece and hex nut. Dimensions: 4-1/8" - Shank Length 3" - Thread Length 2-3/4" - Pass Through Length
$22.99
-
Beer Faucet Shank Spacer | Decoration Ring | 1/2"
Provides 1/2" of extra clearance space needed to operate larger or custom tap handles smoothly and without interference. Durable brass core with a polished chrome finish to perfectly match your existing draft gear. Unthreaded circular design easily slips over standard shanks for an instant, hassle-free upgrade. Need more room for your tap handles? This unthreaded, 1/2" chrome shank spacer is the perfect quick fix for draft systems. By increasing the distance between your mounting surface and the beer faucet, it provides the necessary clearance to operate larger or custom-branded tap handles smoothly. It features a solid brass core for durability and a polished chrome finish to match your existing draft equipment. Product Specifications: Spacing: Provides 1/2" of extension. Material: Solid brass with a polished chrome exterior. Design: Circular, unthreaded spacer with a center hole for easy installation on standard draft shanks. Application: Ideal for draft towers, walls, or keezers requiring extra tap handle clearance.
$5.99
-
Beer Faucet Shank | 2.5" | Welded 5/16" Barb | Includes Plastic Collar
Comes with a welded 5/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 1-1/4" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. The barb size is rounded to 5/16" OD (0.31"). The true size is 7.5mm (0.29"). Dimensions: 3-1/8" - Total Length (Tip to Tip) 2-1/2" - Shank Length (Without Nipple) 1-1/8" - Thread Length 1-1/4" - Pass Through Length
$16.49
-
Beer Faucet Shank | 4" | 304 Stainless Steel | Includes Plastic Collar
Serious homebrewers want only the best hardware touching their brew to prevent “off” flavors. This beer faucet shank is made from high quality 304 stainless steel. This shank is sold as a complete kit and ready to install--just add tubing and a hose clamp. It comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total wall width the shank can bridge once installed is about 2 3/4". Dimensions: 5-1/4" - Total Length (Tip to Tip) 4-1/4" - Shank Length (Without Nut & Nipple) 3" - Thread Length 2-3/4" - Pass Through Length
$27.49
-
Beer Faucet Shank | 5" | Stainless Steel | 3/16" Nipple | Includes Plastic Collar
Comes with a 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 4" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/8" - Shank Length (Without Nut & Nipple) 3-3/4" - Thread Length 4-5/8" - Pass Through Length 3/16 in. Nipple
$29.99
-
Beer Faucet Shank | 5.5" | Welded 1/4" Barb | Includes Plastic Collar
This 6 in. chrome shank comes with a back nut, plastic collar, and a welded 1/4" nipple. Requires a 1" hole saw for installation. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/2" - Shank Length (Without Nut & Nipple) 4-1/8" - Thread Length 5-1/4" - Pass Through Length
$21.99
-
Beer Faucet Shank | 5.5" | Welded 3/16" Barb | Includes Plastic Collar
Faucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar! Once installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses. The shank’s listed size refers to the total length of threaded pipe. Approximately 1 1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Features a welded 3/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation. Dimensions: 6-1/4" - Total Length (Tip to Tip) 5-1/2" - Shank Length (Without Nipple) 4-1/8" - Thread Length 5-1/4" - Pass Through Length
$21.99
-
Beer Faucet Shank | Pass Through | Stainless | 3"
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a stainless steel shank with chrome plated brass hex nuts. Dimensions: 3" - Shank Length 3" - Thread Length 1-7/8" - Pass Through Length Max length with hex nuts at either end Does not account for nuts/nipples you may install Male Beer Thread (5/8" BSP)
$24.49
-
Beer Faucet Shank | Pass Through | Stainless | 4"
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a stainless steel shank with chrome plated brass hex nuts. Dimensions: 4" - Shank Length 4" - Thread Length 2-3/4" - Pass Through Length Max length with hex nuts at either end Does not account for nuts/nipples you may install Male Beer Thread (5/8" BSP)
$29.99
-
Beer Faucet Shank | Stainless | 2" | Includes 3/16" Nipple Back Nut & Plastic Collar
Comes with a 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 11/16" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 3-3/4" - Total Length (Tip to Tip) 2-1/8" - Shank Length (Without Nut & Nipple) 1-1/4" - Thread Length 11/16" - Pass Through Length
$19.99
-
Beer Faucet Shank | Stainless | 4" | 8 mm Duotight Adapter | Intertap® | NukaTap®
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL11945
$36.49
-
Beer Faucet Shank | Stainless | 4" | Intertap® | NukaTap®
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL01113
$36.49
-
Beer Faucet Shank | Stainless | 6 in. | 8 mm Duotight Adapter | Intertap® | NukaTap®
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late July. Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL11952
$39.99
-
Beer Faucet Shank | Stainless | 6" | Intertap® | NukaTap®
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL01120
$43.99
You have seen 528 out of 6358 products