This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
Replacement O-ring for beer faucet tower shanks D1239 and D1242.
This O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet.
KegLand Part Number: KL88067
Outfit any 3" diameter draft tower with these stainless steel Intertap Tower Shanks with Duotight compatible tailpiece. The 1/4" barb pairs perfectly with the Duotight 6.35 mm x 8 mm reducer (DUO100), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718).
The Duotight fitting is sold separately and can be found below under "You Might Also Need".
Please note these shanks are not compatible with Perlick flow control faucets.
Kegland Part number: KL01137
This shank's small design makes it perfect for attaching a faucet to a tower. Included on the Intertap towers that we stock but can be used to replace the short shank on any 3" diameter tower. Made from stainless steel.
Please note these shanks are not compatible with Perlick brand faucets.
Kegland Part number: KL01090
Don’t mar up your faucet using the wrong wrench! This Beer Faucet Wrench will easily get the job done. For the price, this faucet wrench is a no-brainer for anybody with a draft system.
This faucet wrench is used for installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a draft tool.
This chrome plated Draft Beer Faucet will keep your bar or kegerator looking great for years to come.
Industry standard faucet for draft beer that fits North American shanks and towers
Chrome Plated Brass body with quick action brass lever
Specifications:
Body Thread: 1 1/8” – 18 Thread (North American Beer Industry Standard)
Lever Thread: 3/8” – 16 UNC (Unified Coarse Thread); FIts standard tap handles.
Chrome Plated Brass Body
Brass Lever
Filter beer like the pros, only on a smaller scale. Most small breweries and wineries use a large plate filter system to achieve clear beer or wine. Now you can do the same at home. Our new plate filter has a larger surface area, which means more yeast and particulate extraction.
Each filtering session requires two filter pads at a time, and each pad must be the same micron to work. The product is pushed into the housing at 5 PSI and passes on either side of the plate filter housing, then gets forced through the filter pads to the center, where it is pushed out into your awaiting collection vessel, such as a keg or tank.
Includes 2 X 24" long hoses (5/16" ID x 7/16" OD)
Made from ABS plastic. Temperature rated to 167°F (75°C).
The beer filter gets installed inline between two ball lock Cornelius kegs using CO2 pressure to push the beer out of the full keg through the filter and into the clean keg. This kit is designed to filter out particles down to 1 micron, which is considered fine filtration. At one micron the beer will be clear after filtration provided you do not have a starch haze. Filtering also accelerates the conditioning process to just a few days. Most of our customers who use the filtering kit find that they; keg beer, chill it overnight, filter the next day, carbonate, and are drinking clear beer in a couple days. For those who want to bottle beer without sediment, filtering combined with the use of a counter pressure bottle filler will allow you to put crystal clear, carbonated beer into bottle. The beer filtering kit comes with one 10" filter housing, a 1 micron 10" spun poly sediment filter, fittings for connection to the filter housing, 3' of beverage line, clamps, and two beverage out ball lock quick disconnects.
Spun-polypropylene filters are disposable filters and cannot be cleaned and used more than once. However, you can filter multiple kegs with one filter. 3 micron will remove most yeast, and 1 micron filtration will remove almost all yeast. All filters are rated nominal (will filter out 80-85% of matter at given rating). Temperature rated to 125°F.
If you drink with your eyes, and prefer a crystal clear beer, then this really is the cheapest method to getting crystal clear beer with little to no effort. This beer filter is designed to be used with the KegLand 1 Micron Filter Cartridge. This filter works best when used as the middle man when transferring icy cold uncarbonated beer between two kegs. All you will need to do is purchase tubing, ball locks to connect to your kegs, and the filter cartrdige to use this system. The included Duotight fittings are compatible with 9.5 mm OD EVABarrier draft tubing. You can connect this tubing to flare style ball lock disconnects using these 9.5 mm Duotight Flare Adapters. Features: Clear high-pressure housing Purge valve to expel air pockets 1/2" BSP inlet and outlet Compatible with other 10" filter systems Note: This filter can also be used to filter out yeast in your distillation wash. Removing yeast before you put your wash into your boiler will significantly improve the quality of your final spirit. Many off flavors in distillation can come from boiling yeast cells. When the yeast cells get boiled, they break open releasing many off flavors aromas and fusel oils. KegLand Part Number: KL02042
A quick and easy draft tubing setup for dispensing your homebrew!
This Beer Line Assembly has everything you need to hook a line to your keg and pour. Great for when you're out serving brew on the go or for parties. Includes the ball lock beverage-out quick disconnect, 5 feet of 3/16" beverage tubing, a hand held faucet, and two hose clamps.
Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!
This 1“ x 48” line brush is flexible and easy to use. Great for cleaning 1" tubing, especially if the line was used as a fermentation blow off.
Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!
This 1/2“ x 48” line brush is flexible and easy to use. Great for cleaning 1/2" transfer tubing, especially if the line was used with a carboy hood as a blow off.
You’ll never regret owning the right tool for the job!
This line brush is 1/4” in diameter and 36” long. You can use it to clean any 1/4” ID tubing in your brewery or draft setups. The long handle makes it convenient for long lengths of tubing.
Use it to clean:
Draft lines
Keg dip tubes
Down tube on your Cornelius keg
Racking canes
Any tube or line that is 1/4” in diameter
Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!
This 3/8“ x 48” line brush is flexible and easy to use,great for cleaning 3/8" transfer tubing.
Life is too short to drink bad beer! Beer flavor gets funky when your tap, line and faucet are filled with beer stone--a left over gift from pints long since poured. You do NOT want to share that with your friends!
Ideally you want to clean your lines after every keg, but at the very least cleaning them a few times a year (we like quarterly) will keep your brew pouring fresh and your friends asking for more! Our Draft Cleaning Kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through your whole draft system. The faucet gets removed and cleaned with the included faucet wrench and brush. Perfect for cleaning home kegerators as well.
Who doesn't love a well-organized kegerator or keezer? The Beer Line Tidy from KegLand offers an easy solution to straighten out your rat's nest of draft lines. Simply remove the paper backing and use the strong 3M adhesive to attach this beer/gas line organizer to whatever device you like. This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works.
Primarily designed for 8 mm (5/16") OD tubing, but works with 9.5 mm (3/8") OD and 6.35 mm (1/4") OD tubing as well.
Note: for best results, apply the adhesive at room temperature and let stand for 72 hours before applying load.
KegLand Part Number: KL22767
Most breweries and wineries use a large plate filter system to achieve clear product. Now you can do the same at home with two corny kegs. Our Beer and Wine Plate Filter Kit has a larger surface area, which means more yeast and particulate extraction than our cartridge filter, and comes with our plate filter, two disposable filter pads, tubing, flare fittings, and two flare beverage ball locks. This kit works great as either a beer or wine filter, but you may want to use different pads depending on the results you're hoping to achieve
Each filtering session requires two pads at a time, and each pad must be the same micron to work. The beer or wine is pushed out of the keg and into the housing at 5 PSI, where it passes on either side of the filter housing, then gets forced from the center through the pads, where it is then pushed out into your clean keg. The rough sides of both filters should be facing each other on the inside of the filter, so the smooth sides face outward.
Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters. These pads are not designed to be back flushed and reused and should be used in one session.
Clean up your beer and give it that sparkling clarity you see in commercial brews. Filtering removes yeast and dry-hop sediment, both of which can impart off flavors. It's also a great way to give your beer that extra edge in competition. This two-pack of filter pads are for use with our FIL45 series of plate filters. "Sterile" pads will provide between 0.3-0.5 Micron filtration. Please Note: These pads do not remove 100% of bacteria. Only an bsolute rated, 0.45 micron or less cartridge filter can remove all bacteria. All pad filters are rated as "Nominal" filters, meaning a small percentage of the pores in the filter are larger than the stated micron rating. Only certain styles of cartridge filters carry an "Absolute" rating, meaning that all the pores are the stated micron size or smaller.
Clean up your beer and give it that sparkling clarity you see in commercial brews. Filtering removes yeast and dry-hop sediment, both of which can impart off flavors. It's also a great way to give your beer that extra edge in competition. This two-pack of filter pads are for use with our FIL45 series of plate filters. Polish pads will provide between 1-2 Micron filtration.
Clean up your beer and give it that sparkling clarity you see in commercial brews. Filtering removes yeast and dry-hop sediment, both of which can impart off flavors. It's also a great way to give your beer that extra edge in competition. This two-pack of filter pads are for use with our FIL45 series of plate filters. Rough pads will provide between 5-7 Micron filtration.
For the do-it-yourself person, this is the piece that you see at the bottom of most handles, you must also get the D1298B if you want to screw it into a wood tap handle. (5/16" top threads and 3/8" bottom threads)
Design world class beers at home, improve your brewing experience, and simplify your brewing day with BeerSmith! Home brewing software is a great tool for designing recipes, calculating water adjustments, and tracking the results of your brew day. BeerSmith also supports recipe design for mead, wine, and cider. As you grain in experience, BeerSmith grows with you.
Note: Once you have completed your purchase, we will email you the product key to unlock and download your brewing software from beersmith.com.
Gold Subscription Includes:
Gold Cloud Membership
All Major and Minor Updates
Cloud Space: 125 Recipes
Activate Two Computers
Archiving of Cloud Recipes
BeerSmith 3 Desktop
Personal Use License
Upcoming online features
Subscription or 1 Year
Design Great Beer at Home
Design award winning beers with BeerSmith by matching the style and color of classic beers from around the world. Instantly search and access 10's of thousands of recipes on BeerSmithRecipes.com within the BeerSmith software.
Fun, Fast, and Easy to Use
Years in the making — BeerSmith 3 has been redesigned from the ground up to give it a modern look and feel with ribbons, themes, and tabbed browsing. It's designed to make your brewing as easy to use as possible!
Mead, Wine, and Cider Support
BeerSmith 3 now includes support for mead, wine, and cider recipe types as well as native support for fruit, juice, and honey to make it easier than ever to build and track your favorite beverages in one tool.
New BeerSmith 3 Water Profile and Mash Features
BeerSmith 3 is the only software with integrated water profile builder and mash pH estimation and adjustment built right in the recipe builder for all grain brewers. This lets you see the direct impact of a bit of gypsum on your water profile. The mash pH tool takes into account your mash water additions, grain bill, and also acid adjustments. Eliminates the need for a separate water tool or spreadsheet.
Build Recipes Quickly
Building a recipe in BeerSmith is as easy as picking ingredients off a list. Hundreds of pre-loaded ingredients are available including grains, hops, yeast, misc. ingredients, and waters. As you add ingredients, the color, gravity, and bitterness are updated automatically.
Match Your Favorite Beer Styles
Choose from nearly 100 beer styles in our extensive BJCP style guide. The BJCP style guides for mead and cider as well as an extensive custom wine style guide are also included. BeerSmith graphically shows color, bitterness, gravity, and alcohol comparisons against the style as you build your recipe.
Brewing from Beginner to Expert
BeerSmith's new design tab lets you design great extract recipes and new extract features have been added in BeerSmith 3. However, is also features advanced support for all grain brewing, mashing, batch sparging, brew-in-a-bag, and more. Additional tabs can display over 100 details about your recipe and brewing session.
New Fermentation and Carbonation Profiles
Just like the preloaded mash profiles have taken out the guesswork from mashing, BeerSmith 3 has extensive fermentation and carbonation profiles making it a cinch to select the right fermentation and carbonation for your beer by just picking from a list.
Software that Grows with You
BeerSmith 3 will continue to support you as your skills advance. Download recipes, add custom reports, discuss brewing, and be a part of one of the largest online homebrewing communities. BeerSmith 3 includes more detail than ever on your recipes, sessions, and ability to select from over 100 fields to show when designing beers. Many microbreweries and professional brewers have to BeerSmith.
Design world class beers at home, improve your brewing experience, and simplify your brewing day with BeerSmith! Home brewing software is a great tool for designing recipes, calculating water adjustments, and tracking the results of your brew day. BeerSmith also supports recipe design for mead, wine, and cider. As you grain in experience, BeerSmith grows with you.
Note: Once you have completed your purchase, we will email you the product key to unlock and download your brewing software from beersmith.com.
One Time Basic Includes:
Basic Cloud Membership
Minor Updates Only
Cloud Space: 15 Recipes
Activate Two Computers
No Cloud Archive
BeerSmith 3 Desktop
Personal Use License
One Time Purchase
Limited online features
Version 3, 3.1, 3.x only
Design Great Beer at Home
Design award winning beers with BeerSmith by matching the style and color of classic beers from around the world. Instantly search and access 10's of thousands of recipes on BeerSmithRecipes.com within the BeerSmith software.
Fun, Fast, and Easy to Use
Years in the making — BeerSmith 3 has been redesigned from the ground up to give it a modern look and feel with ribbons, themes, and tabbed browsing. It's designed to make your brewing as easy to use as possible!
Mead, Wine, and Cider Support
BeerSmith 3 now includes support for mead, wine, and cider recipe types as well as native support for fruit, juice, and honey to make it easier than ever to build and track your favorite beverages in one tool.
New BeerSmith 3 Water Profile and Mash Features
BeerSmith 3 is the only software with integrated water profile builder and mash pH estimation and adjustment built right in the recipe builder for all grain brewers. This lets you see the direct impact of a bit of gypsum on your water profile. The mash pH tool takes into account your mash water additions, grain bill, and also acid adjustments. Eliminates the need for a separate water tool or spreadsheet.
Build Recipes Quickly
Building a recipe in BeerSmith is as easy as picking ingredients off a list. Hundreds of pre-loaded ingredients are available including grains, hops, yeast, misc. ingredients, and waters. As you add ingredients, the color, gravity, and bitterness are updated automatically.
Match Your Favorite Beer Styles
Choose from nearly 100 beer styles in our extensive BJCP style guide. The BJCP style guides for mead and cider as well as an extensive custom wine style guide are also included. BeerSmith graphically shows color, bitterness, gravity, and alcohol comparisons against the style as you build your recipe.
Brewing from Beginner to Expert
BeerSmith's new design tab lets you design great extract recipes and new extract features have been added in BeerSmith 3. However, is also features advanced support for all grain brewing, mashing, batch sparging, brew-in-a-bag, and more. Additional tabs can display over 100 details about your recipe and brewing session.
New Fermentation and Carbonation Profiles
Just like the preloaded mash profiles have taken out the guesswork from mashing, BeerSmith 3 has extensive fermentation and carbonation profiles making it a cinch to select the right fermentation and carbonation for your beer by just picking from a list.
Software that Grows with You
BeerSmith 3 will continue to support you as your skills advance. Download recipes, add custom reports, discuss brewing, and be a part of one of the largest online homebrewing communities. BeerSmith 3 includes more detail than ever on your recipes, sessions, and ability to select from over 100 fields to show when designing beers. Many microbreweries and professional brewers have to BeerSmith.
Design world class beers at home, improve your brewing experience, and simplify your brewing day with BeerSmith! Home brewing software is a great tool for designing recipes, calculating water adjustments, and tracking the results of your brew day. BeerSmith also supports recipe design for mead, wine, and cider. As you grain in experience, BeerSmith grows with you.
Note: Once you have completed your purchase, we will email you the product key to unlock and download your brewing software from beersmith.com.
Platinum Subscription Includes:
Platinum Cloud Membership
All Major and Minor Updates
Cloud Space: 300 Recipes
Activate Three Computers
Archiving of Cloud Recipes
BeerSmith 3 Desktop
Personal Use License
Upcoming online features
Subscription or 1 Year
Design Great Beer at Home
Design award winning beers with BeerSmith by matching the style and color of classic beers from around the world. Instantly search and access 10's of thousands of recipes on BeerSmithRecipes.com within the BeerSmith software.
Fun, Fast, and Easy to Use
Years in the making — BeerSmith 3 has been redesigned from the ground up to give it a modern look and feel with ribbons, themes, and tabbed browsing. It's designed to make your brewing as easy to use as possible!
Mead, Wine, and Cider Support
BeerSmith 3 now includes support for mead, wine, and cider recipe types as well as native support for fruit, juice, and honey to make it easier than ever to build and track your favorite beverages in one tool.
New BeerSmith 3 Water Profile and Mash Features
BeerSmith 3 is the only software with integrated water profile builder and mash pH estimation and adjustment built right in the recipe builder for all grain brewers. This lets you see the direct impact of a bit of gypsum on your water profile. The mash pH tool takes into account your mash water additions, grain bill, and also acid adjustments. Eliminates the need for a separate water tool or spreadsheet.
Build Recipes Quickly
Building a recipe in BeerSmith is as easy as picking ingredients off a list. Hundreds of pre-loaded ingredients are available including grains, hops, yeast, misc. ingredients, and waters. As you add ingredients, the color, gravity, and bitterness are updated automatically.
Match Your Favorite Beer Styles
Choose from nearly 100 beer styles in our extensive BJCP style guide. The BJCP style guides for mead and cider as well as an extensive custom wine style guide are also included. BeerSmith graphically shows color, bitterness, gravity, and alcohol comparisons against the style as you build your recipe.
Brewing from Beginner to Expert
BeerSmith's new design tab lets you design great extract recipes and new extract features have been added in BeerSmith 3. However, is also features advanced support for all grain brewing, mashing, batch sparging, brew-in-a-bag, and more. Additional tabs can display over 100 details about your recipe and brewing session.
New Fermentation and Carbonation Profiles
Just like the preloaded mash profiles have taken out the guesswork from mashing, BeerSmith 3 has extensive fermentation and carbonation profiles making it a cinch to select the right fermentation and carbonation for your beer by just picking from a list.
Software that Grows with You
BeerSmith 3 will continue to support you as your skills advance. Download recipes, add custom reports, discuss brewing, and be a part of one of the largest online homebrewing communities. BeerSmith 3 includes more detail than ever on your recipes, sessions, and ability to select from over 100 fields to show when designing beers. Many microbreweries and professional brewers have to BeerSmith.
Design world class beers at home, improve your brewing experience, and simplify your brewing day with BeerSmith! Home brewing software is a great tool for designing recipes, calculating water adjustments, and tracking the results of your brew day. BeerSmith also supports recipe design for mead, wine, and cider. As you grain in experience, BeerSmith grows with you.
Note: Once you have completed your purchase, we will email you the product key to unlock and download your brewing software from beersmith.com.
Professional Includes:
Pro Cloud Membership
All Major and Minor Updates
Cloud Space: 750 Recipes
Activate Five Computers
Archiving of Cloud Recipes
BeerSmith 3 Desktop
Commercial Use License
Upcoming online features
Subscription or 1 Year
Design Great Beer at Home
Design award winning beers with BeerSmith by matching the style and color of classic beers from around the world. Instantly search and access 10's of thousands of recipes on BeerSmithRecipes.com within the BeerSmith software.
Fun, Fast, and Easy to Use
Years in the making — BeerSmith 3 has been redesigned from the ground up to give it a modern look and feel with ribbons, themes, and tabbed browsing. It's designed to make your brewing as easy to use as possible!
Mead, Wine, and Cider Support
BeerSmith 3 now includes support for mead, wine, and cider recipe types as well as native support for fruit, juice, and honey to make it easier than ever to build and track your favorite beverages in one tool.
New BeerSmith 3 Water Profile and Mash Features
BeerSmith 3 is the only software with integrated water profile builder and mash pH estimation and adjustment built right in the recipe builder for all grain brewers. This lets you see the direct impact of a bit of gypsum on your water profile. The mash pH tool takes into account your mash water additions, grain bill, and also acid adjustments. Eliminates the need for a separate water tool or spreadsheet.
Build Recipes Quickly
Building a recipe in BeerSmith is as easy as picking ingredients off a list. Hundreds of pre-loaded ingredients are available including grains, hops, yeast, misc. ingredients, and waters. As you add ingredients, the color, gravity, and bitterness are updated automatically.
Match Your Favorite Beer Styles
Choose from nearly 100 beer styles in our extensive BJCP style guide. The BJCP style guides for mead and cider as well as an extensive custom wine style guide are also included. BeerSmith graphically shows color, bitterness, gravity, and alcohol comparisons against the style as you build your recipe.
Brewing from Beginner to Expert
BeerSmith's new design tab lets you design great extract recipes and new extract features have been added in BeerSmith 3. However, is also features advanced support for all grain brewing, mashing, batch sparging, brew-in-a-bag, and more. Additional tabs can display over 100 details about your recipe and brewing session.
New Fermentation and Carbonation Profiles
Just like the preloaded mash profiles have taken out the guesswork from mashing, BeerSmith 3 has extensive fermentation and carbonation profiles making it a cinch to select the right fermentation and carbonation for your beer by just picking from a list.
Software that Grows with You
BeerSmith 3 will continue to support you as your skills advance. Download recipes, add custom reports, discuss brewing, and be a part of one of the largest online homebrewing communities. BeerSmith 3 includes more detail than ever on your recipes, sessions, and ability to select from over 100 fields to show when designing beers. Many microbreweries and professional brewers have to BeerSmith.
BeerStix Carboy Sticks are one of the simplest and easiest forms of oak to use in beermaking. Simply add one stick per 5 - 6.5 gallons, and enjoy the results a couple months later. When it comes to removing the stick, there's no fumbling around with cubes trying to get them through the neck of a carboy. These are made with a hole at the top so you can lift the Beer Stix out with fishing line when done. The Carboy Beer Stix are an awesome addition to the homebrewers aresenal. Use them to take a recipe to a fun and delicious next level. Already make an amazing stout, or brown? These are prime candidates to age with some oak, and enjoy the rich results!
American Oak toasted to a Medium + with the beerstix milling will give you flavors and aromas of roasted coffee, light chocolate and honey, as well as some spice notes and hints of leather. Every beer will accentuate, or mask different flavors from the oak, so expect some variation between beers! The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting.
Features:
Oak Origin - North American New York Alba
Toast Level - Medium Plus
Oak Form - Carboy Stix (2)
Volume Treated - 6 gal beer each
Extraction Time - 2 Months (see note below)
Flavors & Aromas - Roast Coffee, Light Chocolate, Spice, Honey, Nutmeg, Leather Hints.
Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
BeerStix Tank Staves are basically oversized Carboy Stix that are designed to treat larger volumes of beer stored in tanks. These are TSS-60 Tank Staves, which are sized for 60 gal batches of beer. Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these will provide a round and rich oak character specific to the toast level and origin. American Oak toasted to a Medium + with the beerstix milling will give you flavors and aromas of roasted coffee, light chocolate and honey, as well as some spice notes and hints of leather. Every beer will accentuate, or mask different flavors from the oak, so expect some variation between beers!
The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting.
Features:
Oak Origin - North American New York Alba
Toast Level - Medium Plus
Oak Form - Tank Stave, TSS-60
Volume Treated - 60 gal Beer
Extraction Time - 2 Months (see note below)
Flavors & Aromas - Roast Coffee, Light Chocolate, Spice, Honey, Nutmeg, Leather Hints.
Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
Beerstix 8 piece Barrel Tethers are a great new means of imparting high quality Oak flavor to your beer. These tethers are designed to fit through the bung hole of a barrel, and sized to treat 59 gallons of beer (for smaller volumes, or less oak impact, simply cut off sections as necessary). Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Tethers will provide a round and rich oak character specific to the toast level and origin. American Oak toasted to a Medium + with the beerstix milling will give you flavors and aromas of roasted coffee, light chocolate and honey, as well as some spice notes and hints of leather. Every beer will accentuate, or mask different flavors from the oak, so expect some variation between beers!
The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting.
Features:
Oak Origin - North American New York Alba
Toast Level - Medium Plus
Oak Form - Barrel Tether (8 Piece)
Volume Treated - 59 Gal Beer
Extraction Time - 2 Months (see note below)
Flavors & Aromas - Roast Coffee, Light Chocolate, Spice, Honey, Nutmeg, Leather Hints.
Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
Beerstix 8 piece Barrel Tethers are a great new means of imparting high quality Oak flavor to your beer. These tethers are designed to fit through the bung hole of a barrel, and sized to treat 59 gallons of beer (for smaller volumes, or less oak impact, simply cut off sections as necessary). Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Tethers will provide a round and rich oak character specific to the toast level and origin. French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate. Different beer styles will accentuate or mask different flavors from the oak, so expect some variation!
The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the Wine Stix, allowing for denser toasting.
Features:
Oak Origin - France, Allier Region
Toast Level - Medium Plus
Oak Form - Barrel Tether (8 Piece)
Volume Treated - 59 Gal Beer
Extraction Time - 2 Months (see note below)
Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness
Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
BeerStix Carboy Sticks are one of the simplest and easiest forms of oak to use in beermaking. Simply add one stick per 5 - 6.5 gallons, and enjoy the results a couple months later. When it comes to removing the stick, there's no fumbling around with cubes trying to get them through the neck of a carboy. These are made with a hole at the top so you can lift the Beer Stix out with fishing line when done. The Carboy Beer Stix are an awesome addition to the homebrewers aresenal. Use them to take a recipe to a fun and delicious next level. Already make an amazing stout, or brown? These are prime candidates to age with some oak, and enjoy the rich results!
French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate. Different beer styles will accentuate or mask different flavors from the oak, so expect some variation! The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting.
Features:
Oak Origin - France, Allier Region
Toast Level - Medium Plus
Oak Form - Carboy Stix (2)
Volume Treated - 6 gal beer each
Extraction Time - 2 Months (see note below)
Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness
Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
Think Stave Segments, evolved. The BeerStix Domininos are 1 1/2" square segments of oak, milled to give you quick extraction, and full flavor. While similar to conventional stave segments, you will see similar results in a much shorter timeframe, making these much more suitable for beer. This is a 490 g (1 lb) bag of French Oak Domininos, Toasted Medium Plus and sized to oak 100 gallons of Beer. This is the quickest turnaround on a Beer Stix product. At one month extraction, you'll see a quick integration of rich oak character due to the high surface area of these domininos in contact with your beer.
Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Domininos will provide a round and rich oak character specific to the toast level and origin. French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate. Different beer styles will accentuate or mask different flavors from the oak, so expect some variation!
Features:
Oak Origin - France, Allier Region
Toast Level - Medium Plus
Oak Form - Domininos, 490 gram
Volume Treated - 100 Gal Beer
Extraction Time - 1 Month (see note below)
Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness
Please Note - Allow 1 month minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
BeerStix Tank Staves are basically oversized Carboy Stix that are designed to treat larger volumes of beer stored in tanks. These are TSS-60 Tank Staves, which are sized for 60 gal batches of beer. Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Staves will provide a round and rich oak character specific to the toast level and origin. French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate. Different beer styles will accentuate or mask different flavors from the oak, so expect some variation!
The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting.
Features:
Oak Origin - France, Allier Region
Toast Level - Medium Plus
Oak Form - Tank Stave, TSS-60
Volume Treated - 60 gal Beer
Extraction Time - 2 Months (see note below)
Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness
Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
Far from your average coffeemaker, the Brazen Plus is a fully customizable unit allowing for total control over your brew.
The Brazen Plus brew system has features not found on any other consumer coffee maker. Settings are adjustable for water brewing temperature and pre-soak like found on many commercial brewers. Set your brewing temperature between 190–210°F / 90–99°C with accuracy to within 1-degree Fahrenheit. A patented feature allows temperature calibration with altitude correction. The oversized shower head and pulsed water flow ensure complete coffee bed saturation for terrific coffee extraction. Permanent filter included or use paper filters. Thermal carafe (SCA approved) with brew through lid keeps coffee hot. The Brazen Plus 3.0 is one of the very few that meet the Home Brewer certified by the Specialty Coffee Association of America to their standards.
3.0 Updates:
New Universal System Power Boards
New Program: revised Pulse Water Release Timing for better extraction
New Micro Controller: faster data refresh
Features:
Capacity: 1.2 Liter, 40oz, 8 (5oz) cups
Temperature Control: Set brewing temperature from 190–210°F (90–99°C)
Programmable Brew Start Time: Wake up to coffee with timed brew setting
Ideal Coffee Extraction: Coffee grounds are fully saturated due to oversized showerhead and pulsing of the water flow.
Patented Sensor Calibration: sensor calibration for consistent temperature accuracy
Elevation calibration: Adjust your brew temperature based on elevation to achieve a hot cup of coffee regardless of how far above sea level.
Thermal carafe with brew through lid keeps coffee hot (SCA approved)
Adjustable time for Pre-soak: Allows the coffee to bloom before brewing for better flavor
Stainless steel water reservoir (SUS304): that’s easy to fill
Stainless Steel Thermal Valve: Water release
Permanent gold filter: Included or use paper filters (10 cup for max benefit/ extraction)
Memory save: Settings remain, even if the power goes out.
Sleep mode: Saves power when not in use
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid June.
Far from your average coffeemaker, the Brazen Plus is a fully customizable unit allowing for total control over your brew.
The Brazen Plus brew system has features not found on any other consumer coffee maker. Settings are adjustable for water brewing temperature and pre-soak like found on many commercial brewers. Set your brewing temperature between 190–210°F / 90–99°C with accuracy to within 1-degree Fahrenheit. A patented feature allows temperature calibration with altitude correction. The oversized shower head and pulsed water flow ensure complete coffee bed saturation for terrific coffee extraction. Permanent filter included or use paper filters. Thermal carafe (SCA approved) with brew through lid keeps coffee hot. The Brazen Plus 3.0 is one of the very few that meet the Home Brewer certified by the Specialty Coffee Association of America to their standards.
3.0 Updates:
New Universal System Power Boards
New Program: revised Pulse Water Release Timing for better extraction
New Micro Controller: faster data refresh
Features:
Capacity: 1.2 Liter, 40oz, 8 (5oz) cups
Temperature Control: Set brewing temperature from 190–210°F (90–99°C)
Programmable Brew Start Time: Wake up to coffee with timed brew setting
Ideal Coffee Extraction: Coffee grounds are fully saturated due to oversized showerhead and pulsing of the water flow.
Patented Sensor Calibration: sensor calibration for consistent temperature accuracy
Elevation calibration: Adjust your brew temperature based on elevation to achieve a hot cup of coffee regardless of how far above sea level.
Thermal carafe with brew through lid keeps coffee hot (SCA approved)
Adjustable time for Pre-soak: Allows the coffee to bloom before brewing for better flavor
Stainless steel water reservoir (SUS304): that’s easy to fill
Stainless Steel Thermal Valve: Water release
Permanent gold filter: Included or use paper filters (10 cup for max benefit/ extraction)
Memory save: Settings remain, even if the power goes out.
Sleep mode: Saves power when not in use
Get started with the coolest roaster on the market - the Behmor® 2000AB Plus! We've been roasting with the Behmor® since the original 1600 model, and love the upgrades and improvements they've made over the years. Several employees use this roaster at home as well. We love the large capacity and the fact that it is relatively quiet and not so smoky. Plus the design of it looks like something that actually belongs on the countertop!
The Behmor 2000AB Plus is an easy to use unit and our top choice for balancing roast quality with affordability. Based on a rotating drum, similar to commercial roasters, you can roast up to one pound at a time. As a drum style roaster it is much quieter than air bed roasters. The smoke suppression technology is also a key feature for indoor use. It comes with preprogrammed roast profiles but you can also use manual mode to control temps and drum speed.
Features:
Large capacity home roaster - 1/4 lb to 1 lb
Patented smoke suppression technology
New higher multi-speed motor for better control during roasting
More powerful MCU micro controller cuts data refresh time by 50%
On board audible beep advisory (unattended safety cutoff and :15 remaining warning)
Reprogrammable firmware feature (requires wired connection)
5 custom pre-programmed roast profiles
Manual roasting override ability of key settings
Cooling cycle for quick end to roasting duration
Thermostatically controlled quartz roasting elements
Lighted interior for visual monitoring during roasting
Easy to read and operate display
Adjustable time controls to adjust roast times on-the-fly
Removable roasting drum with internal braces for full bean turbulence
Removable chaff tray for easy cleaning
Fan separates chaff from the bean and into the chaff tray
Automatic system diagnostics for troubleshooting
Easy to clean interior
New double pane glass
RoHS compliant
4 Pre-Programmed Time Controls
Operate at 55db or less
Power draw is 1630w/15a (Designed for use in 120v/ 60hz environments ONLY)
Dims: 17" L x 12" W x 10.25" H
Get started with the best package on the market - the Behmor® 2000AB Plus with beans and accessories.
The Behmor® 2000AB Plus is an easy to use roaster and our top choice for balancing roast quality with affordability. Based on a rotating drum, similar to commercial roasters, you can roast up to one pound at a time. As a drum style roaster is is much quieter than air based roasters. The smoke suppression technology is also a key feature for indoor use. It comes with preprogrammed roast profiles but you can also use manual mode to control temps and drum speed.
This kit includes a stylish Bodum® 8-cup French Press - a truly gourmet method of brewing specialty coffee. Also included is "Home Coffee Roasting: Romance and Revival" - an excellently written, incredibly informative, and authoritative book written by Kenneth Davids (a big name in the coffee industry). You will be roasting like a pro in no time!
You Get What You Pay For:
When purchasing a Coffee Starter Kit from us, keep in mind that you purchase more than a book and some equipment. Along with every one of our products we provide a wealth of knowledge and advice. Coffee tasting and roasting notes, product reviews, tutorials, experiment summaries, and phone or email customer support (advice, recommendations, assistance, and the like) are services that we provide at no extra charge. We are serious about quality coffee and products as well as excellent customer service. Your satisfaction is guaranteed.
Kit Includes:
Behmor® 2000AB Plus Coffee Roaster
8-cup Bodum® Brazil French Press
Home Coffe Roasting: Romance and Revival
Three pounds of quality green coffee beans!
Please note the primary image shows an older model. The 2000AB Plus has a black exterior as shown in the images that follow.
Belgian Ale will give you a full roundup of phenolic, fruity, clove, plum, and banana flavors
Includes Perle and Saaz hops
Estimated ABV: 5%
Estimated IBUs: 32
Makes 5 gallons of finished beer
Belgian ales are really about creating a simple yet elegant malt base upon which the unique Belgian yeast strains can create their wonderful, complex flavors. This Belgian Ale is their equivalent of our pale ale in alcoholic strength and body. The difference is that the hops are very subdued and only complimentary where as in many American beers hops can create a majority of the flavor profile. One is not better than the other just different, and we love diversity in beer.
Terms used to describe Belgian Ales include phenolic, fruity, with the occasional clove, plum, and banana flavors coming through. Sometimes you just have to try one to understand. In the Dubble and Triple you will have some higher alcohol flavors coming through. This version is less alcoholic and highly drinkable.
Any of the four Belgian yeast strains that we carry from Whitelabs could be used in any of the Belgian recipes. They are all excellent in their own right. The malt extract for this kit is made entirely from our German Pilsner Malt, giving it authentic European flavor. We use turbinado sugar to help up the alcohol and dry out the beer during fermentation.
Makes 5 gallons
Estimated Original Gravity: 1.049-53
SRM (Color Range): 4
IBUs: 32
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Belgian Ale will give you a full roundup of phenolic, fruity, clove, plum, and banana flavors
Includes Perle and Saaz hops
Estimated ABV: 5%
Estimated IBUs: 32
Makes 5 gallons of finished beer
Belgian ales are really about creating a simple yet elegant malt base upon which the unique Belgian yeast strains can create their wonderful, complex flavors. This Belgian Ale is their equivalent of our pale ale in alcoholic strength and body. The difference is that the hops are very subdued and only complimentary where as in many American beers hops can create a majority of the flavor profile. One is not better than the other just different, and we love diversity in beer.
Terms used to describe Belgian Ales include phenolic, fruity, with the occasional clove, plum, and banana flavors coming through. Sometimes you just have to try one to understand. In the Dubble and Triple you will have some higher alcohol flavors coming through. This version is less alcoholic and highly drinkable.
Any of the four Belgian yeast strains that we carry from Whitelabs could be used in any of the Belgian recipes. They are all excellent in their own right. The malt extract for this kit is made entirely from our German Pilsner Malt, giving it authentic European flavor. We use turbinado sugar to help up the alcohol and dry out the beer during fermentation.
The extract version of this kit does NOT include grains. Most of the flavor from this beer is derived from the yeast and fermentation.
Makes 5 gallons
Estimated Original Gravity: 1.049-53
SRM (Color Range): 4
IBUs: 32
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Wire hoods are a key part of any Belgian-style bottling. Not only do they complete the look of the bottle, but they are required to keep the mushroom cork in place once the carbonation builds up.
Apply them easily with a Wire Hood Fastener giving the hood 5 1/2 turns.
Clear rock candi sugar from Belgium. Add fermentable sugar without adding color or strong flavors. Use to boost the gravity of Belgian and other beers without adding residual sweetness. Color: 0 degrees Lovibond.
Dark rock candi sugar from Belgium. Add great flavor and fermentables to Belgian dark beers, without adding residual sweetness. Color: 275 degrees Lovibond.
Give your homebrewed Belgians an authentic finishing touch!
You will love the old world look you get when you seal your Belgian beer bottles with corks and a wire hood. These corks are made specifically for use with Belgian beer bottles. Our corks are brewery-grade. They are also very dense and give a great seal. They work well with our Floor Corker (W410). A hand corker will not work with these corks.
A long-time customer - John Francisco - told us a tip that he uses when he corks his Belgian beers - put a #7 stopper (FE440) over the plunger rod of the corker so that only 1 3/4" of the rod is exposed. This will stop the cork from going into the bottle too far. A wire hood can then be fastened over the remaining 6/8" - 7/8" of cork sticking out of the bottle. We have tried this and it works great!
Attention: These corks come sanitary in the bag ready to be corked into a bottle. Do not sanitize or boil these or you will ruin the integrity of the cork.
1 5/8" L x 1" D
Special B and Caramunich malts add a slight, pleasant caramel flavor to this traditional Dubbel recipe
Includes Perle and Saaz hops
Estimated ABV: 5.9%
Estimated IBUs: 27
Makes 5 gallons of finished beer
Our signature Belgian Dubbel recipe kit is to die for! We use the traditional grains: Belgian Special B and Caramunich malts which give it a slight caramel flavor that the Belgian Trippel does not have. Pour a glass, close your eyes and imagine yourself as a monk with a job to do. Now get to work and sample that beer.
Makes 5 gallons
Estimated Original Gravity:1.059-62
SRM (Color Range): 8-9
IBUs: 27
Estimated Alcohol Percentage: 5.9%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Special B and Caramunich malts add a slight, pleasant caramel flavor to this traditional Dubbel recipe
Includes Perle and Saaz hops
Estimated ABV: 5.9%
Estimated IBUs: 27
Makes 5 gallons of finished beer
Our signature Belgian Dubbel beer kit is to die for! We use the traditional grains: Belgian Special B and Caramunich malts which give it a slight caramel flavor that the Trippel does not have. Pour a glass, close your eyes and imagine yourself as a monk with a job to do. Now get to work and sample that Belgian Dubbel beer!
Makes 5 gallons
Estimated Original Gravity:1.059-62
SRM (Color Range): 8-9
IBUs: 27
Estimated Alcohol Percentage: 5.9%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Packed with flavor and the spicy phenolics you want from a Belgian beer but with a mellow alcohol level
Includes Perle and Mt. Hood hops
Estimated ABV: 5.2%
Estimated IBUs: 20
Makes 5 gallons of finished beer
Sometimes you want to drink a belgian but not get too buzzed too quickly. So we created this belgian pale ale that has the spicy phenolics you want but without a lot of alcohol. Still packed with a lot of flavor from the caramunich and special B.
We include 8oz of corn sugar to help dry out the beer during fermentation as well. Belgians are suppose be dry but bold in flavor. We give you the MoreBeer! Belgian Pale Ale.
Makes 5 gallons
Estimated Original Gravity: 1.050-1.055
SRM (Color Range): 17
IBUs: 20
Estimated Alcohol Percentage: 5.2%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Packed with flavor and the spicy phenolics you want from a Belgian beer but with a mellow alcohol level
Includes Perle and Mt. Hood hops
Estimated ABV: 5.2%
Estimated IBUs: 20
Makes 5 gallons of finished beer
Sometimes you want to drink a Belgian ale but not get too buzzed too quickly. So we created this Belgian Pale Ale that has the spicy phenolics you want but without a lot of alcohol. Still packed with a lot of flavor from the caramunich and special B.
This Belgian Pale Ale includes 8oz of corn sugar to help dry out the beer during fermentation as well. Belgians are suppose be dry but bold in flavor. We give you the MoreBeer! Belgian Pale Ale.
Makes 5 gallons
Estimated Original Gravity: 1.050-1.055
SRM (Color Range): 17
IBUs: 20
Estimated Alcohol Percentage: 5.2%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
