What is a Foeder? Basically, it is a large barrel or oak vessel used to age wine and, as of late, many breweries have begun to use them as well. Breweries like New Belgium Brewing, Epic Brewing Company, Crooked Stave and Deschutes are using them for sour beer production and beyond. Although most popular for sour beers, you can add a matured oak character to any beer, such as porters, stouts, English ales, lagers and pilsners. Pilsners?! Yes, Pilsners. We have tasted a few excellent pilsners matured in foeders recently. We were so impressed, we decided to bring them in for our amazing customers to play with. Don't delay, get your foeder today!
This model stand vertically, which compared to horizontal foeders, takes up a much smaller footprint in your brewery or winery. The longer, skinnier design also allows for a higher wood surface to beverage ratio. The oak is porous, so it will retain the character and living microbes of previous batches. Many sour beer producers choose to let the oak inoculate the next batch and treat the barrel as a living entity. We hope that you choose to give this vessel a loving home, with kids and a backyard, or maybe just a temperate, moderately humid production facility.
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
6HL (158 gal, 5 BBL)
Height - 43.3"
Upper Diameter - 31.8"
Lower Diameter - 37"
Empty Weight - 529 lbs
Please note: example photos are of 3.5 HL / 3 bbl unit.
What is a Foeder? Basically, it is a large barrel or oak vessel used to age wine and, as of late, many breweries have begun to use them as well. Breweries like New Belgium Brewing, Epic Brewing Company, Crooked Stave and Deschutes are using them for sour beer production and beyond. Although most popular for sour beers, you can add a matured oak character to any beer, such as porters, stouts, English ales, lagers and pilsners. Pilsners?! Yes, Pilsners. We have tasted a few excellent pilsners matured in foeders recently. We were so impressed, we decided to bring them in for our amazing customers to play with. Don't delay, get your foeder today!
This model stand vertically, which compared to horizontal foeders, takes up a much smaller footprint in your brewery or winery. The longer, skinnier design also allows for a higher wood surface to beverage ratio. The oak is porous, so it will retain the character and living microbes of previous batches. Many sour beer producers choose to let the oak inoculate the next batch and treat the barrel as a living entity. We hope that you choose to give this vessel a loving home, with kids and a backyard, or maybe just a temperate, moderately humid production facility.
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
8.2HL (216 gal, 7 BBL)
Height - 47.2"
Upper Diameter - 36.6"
Lower Diameter - 41.7"
Empty Weight - 617 lbs
Please note: example photos are of 3.5 HL / 3 bbl unit.
What is a Foeder? Basically, it is a large barrel or oak vessel used to age wine and, as of late, many breweries have begun to use them as well. Breweries like New Belgium Brewing, Epic Brewing Company, Crooked Stave and Deschutes are using them for sour beer production and beyond. Although most popular for sour beers, you can add a matured oak character to any beer, such as porters, stouts, English ales, lagers and pilsners. Pilsners?! Yes, Pilsners. We have tasted a few excellent pilsners matured in foeders recently. We were so impressed, we decided to bring them in for our amazing customers to play with. Don't delay, get your foeder today!
This model lays horizontal, which is ideal for aging wine and lagers. Horizontal foeders are ideal for any maturation happening post fermentation, though you could absolutely ferment in one if you opted to do so—you do you, boo. The oak is porous, so it will retain the character and living microbes of previous batches. Many sour beer producers choose to let the oak inoculate the next batch and treat the barrel as a living entity. We hope that you choose to give this vessel a loving home, with kids and a backyard, or maybe just a temperate, moderately humid production facility.
Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes.
Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated.
As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April.
Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests.
20HL (528 gal, 17 BBL)
Length - 63"
Head Diameter - 53.2"
Abdomen Diameter - 61.5"
Empty Weight - 1124 lbs
Medium toast level oak chips used during fermentation for 1-2 months
Made from winery quality Slavonian Oak
Use at a starting rate of 1.5-3.5 oz per 5 gallons
Winery quality Slavonian Oak chips with Medium level toast. Recommended for use during fermentation for 1-2 months. As a starting point use 1.5-3.5 oz per 5 gallons. Taste after two months and add more if needed.
Balazs segments are made from Slavonian oak. Slavonian oak is grown in the area of Croatia that borders Hungary. While the area of Slavonia has changed hands many times, being under Hungarian control in the past, what has always remained constant is the quality of the oak grown in the region. Slavonian oak is beloved in Italy where it is widely used in the traditional and classic Italian wines of the Veneto, Tuscany and Piedmont. It is known for having the utmost respect for the fruit which is why Italian producers extensively use this oak. This makes this oak extremely useful for home winemakers who, because of the small quantities being made, need to pay special attention to not over oaking their wine.
Use: Fermentation
Form: Chips - 0.15-1.5"
Time of Contact: 1-2 months
Recommended Quantity: 0.3-0.7 oz/gal
Type: Medium Toast
Brand new, unused oak barrel that makes for a stunning planter barrel or flower pot
Offers a clean, bright aesthetic compared to distressed, used barrels
Zinc-plated steel barrel hoops for corrosion resistance
Stainless ring handles for easy carrying when empty
Linseed oil coated on the outside for beauty and increased longevity
These planters will add a beautiful aesthetic to breweries, wineries, or your home patio. Plenty of room for growing hops, grape vines, barley, flowers, fruits, vegetables, citrus, or whatever your green thumb leads you to sow.
Unlike traditional wine barrels cut in half these barrels are purpose-designed so they not only look beautiful, they are built to stay together over the long haul.
Open Diameter 19.75" x 14" Deep
Brand new, unused oak barrel that makes for a stunning planter barrel or flower pot
Offers a clean, bright aesthetic compared to distressed, used barrels
Zinc-plated steel barrel hoops for corrosion resistance
Stainless ring handles for easy carrying when empty
Linseed oil coated on the outside for beauty and increased longevity
These planters will add a beautiful aesthetic to breweries, wineries, or your home patio. Plenty of room for growing hops, grape vines, barley, flowers, fruits, vegetables, citrus, or whatever your green thumb leads you to sow.
Unlike traditional wine barrels cut in half these barrels are purpose-designed so they not only look beautiful, they are built to stay together over the long haul.
Open Diameter 21.75" x 17.75" Deep
If you like serving out of commercial kegs but prefer the ease of using ball lock fittings in your draft system, this adapter is for you. Instead of buying additional keg couplers and beer thread to ball lock adapters, you can use this tapping head to go straight from sanke keg to ball lock. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp.
Be sure to always depressurize the keg before removing the tapping head.
Includes:
Ball Lock Post Lid
2" tri-clamp
Single-side beaded tri-clamp gasket
60 cm silicone dip tube (23.6")
Red 2.5 bar PRV (36 psi)
KegLand Part Number: KL10610
Adjustable relief valve installs on standard ball lock keg posts Use with any ball lock keg to control flow during closed pressure transfers Integrated pressure gauge can be swapped out with a digital gauge or large face dial gauge for easier, more accurate readings Adjustable black cap can be swapped out for color coded PRVs with a fixed pressure Low-profile design only measures 1.75" in height This easy to use and compact pressure relief valve is super handy for keg transfers. Using a ball lock quick disconnect as the main body, the valve easily snaps onto ball lock keg posts. Adjustable relief valves are a great way to limit oxygen exposure and regulate flow during closed keg transfers, The included gauge reads from 0-30 PSI and can be swapped out with a digital gauge or large face dial gauge for easier, more accurate readings. The black pull ring cap on the other end can be rotated for adjustments, or swapped to a range of color coded PRVs for a fixed pressure. This low-profile option only measures 1.75" in height. It works right out of the box but has several upgrade options as shown in the images. Warning: Never swap out the valve's standard PRV with a color coded PRV that exceeds the pressure rating of your vessel. Features: Duotight fitting where the gauge attaches This allows for upgrading the valve with a digital gauge or larger analog gauge Manual pull ring pressure relief This allows for you to not only adjust the pressure with the black rotary knob but also use the ring pull to instantly release pressure if you want to release manually Option for several color coded PRVs to be used (see below) Yellow - 17 psi Red - 35 psi Green - 65 psi Gray - 100 psi KegLand Part Number: KL29438
This simple pump kit is a great way to clean your draft lines when you don't want to waste CO2 or mix up a full batch of line cleaner. The PCO tee piece can be attached to a PET beer bottle or repurposed soda bottle, then pressurized with the hand pump to push cleaner through your ball lock disconnect and draft lines.
You can also use the pump kit to turn just about any PET bottle into a mini party keg; one that's easy to take with you while leaving your gas equipment at home. But since you'll be using air to push the beer out, we recommend consuming the contents of the bottle well within 24 hours.
Kit Contains:
Yellow carbonation cap
Red Tee Piece - 28mm PCO 1881 Threads (Female x Male x Male)
Mini yellow hand pump
11.75" length of EVABarrier tubing (5mm ID x 8mm OD)
PET Bottle not included
KegLand Part Number: KL20220
This bev out ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs.
1/4" BSP threads and locking nut.
Kegland Part Number: KL03162
This gas in ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to one of our aluminum gas manifolds for a quick connect option.
1/4" BSP threads and locking nut.
Kegland Part Number: KL03179
A great accessory to have when performing pressure transfers. Designed by the MoreBeer! R&D team and made from stainless steel components for long-lasting quality. Features the Torpedo Keg gas-in disconnect and our specially designed adjustable stainless gas pressure relief valve (D1833L). Looking for a PRV valve with pressure gauge? Check out the FIL42AS. Pressure Transfers Great for pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Note: The very end of the pressure relief valve can be adjusted by unscrewing the knurled adjustment knob. If too tight and not adjustable by hand, wrap a towel around the adjustment knob and loosen with pliers. Then finger tighten or loosen to desired pressure.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
This Ball Lock QD With Pressure Gauge and Adjustable PRV is a great accessory to have when performing pressure transfers. Made from stainless steel components for long-lasting quality. Features the Torpedo Keg gas-in disconnect and adjustable stainless gas pressure relief valve (D1833L). This model also features a pressure gauge that reads from 0-15 psi. Don't need the gauge? Check out the FIL42S.
Pressure Transfers
You may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having an adjustable pressure relief valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process.
Note: The very end of the pressure relief valve can be adjusted by unscrewing the knurled adjustment knob. If too tight and not adjustable by hand, wrap a towel around the adjustment knob and loosen with pliers. Then finger tighten or loosen to desired pressure.
An Intertap accessory that converts the spout of an Intertap faucet into a ball lock quick disconnect. One of the most popular uses is being able to connect the beverage side of your counter pressure filler without having to open your refrigerator door.
Compatible with Intertap and NukaTap faucets.
Stainless Steel Construction
Kegland Part number: KL01052
The WilliamsWarn ball lock QD with CombiBarb connection allows you to connect draft lines using either standard hose & clamp or Duotight & EVABarrier tubing. The CombiBarb will accept 8 mm Duotight fittings for use with 8 mm OD EVABarrier, but also works perfectly well with 1/4" or 5/16" ID tubing.
Bev Out ball lock quick disconnect with 1/4 in. flare connection. Flare fitting barbs come in multiple sizes so you can choose the draft tubing size that best suits your needs. Features a built-in washer so you will not need a separate nylon washer.
Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
Gas In ball lock quick disconnect with 1/4 in. barb connection. Recommended for use with 3/16 in. ID tubing for a tight fit.
Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
The WilliamsWarn ball lock QD with CombiBarb connection allows you to connect draft lines using either standard hose & clamp or Duotight & EVABarrier tubing. The CombiBarb will accept 8 mm Duotight fittings for use with 8 mm OD EVABarrier, but also works perfectly well with 1/4" or 5/16" ID tubing.
Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg.
Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure.
Gauge reads 0 - 15 psi
This cast iron wide-profile banjo burner is strong and efficient, topping our ratings in getting wort to a quick boil, while using the same amount or less of propane. Adjusted for efficiency this banjo burner produces around 70,000 BTU/hr, and in full, this banjo burner mode produces 100,000 btu. Banjo burners can often times have issues when using with low flame output. We sourced and tested a number of different units, before settling on this one, which performs great at low output. Uses 3/8" male flare fitting (included). Comes with steel orifice plate for regulating airflow The burner has a 9 7/8" diameter and is 14 3/4" long This banjo burner requires a propane regulator to function properly. We recommend a Wind Guard with these units if brewing outdoors. If using indoors, you must have proper ventilation in the form of an overhead cooking hood.
This cast iron wide-profile banjo burner is strong and efficient, topping our ratings in getting wort to a quick boil, while using the same amount or less of propane. Adjusted for efficiency this banjo burner produces around 70,000 BTU/hr, and in full, this banjo burner mode produces 100,000 btu. Banjo burners can often times have issues when using with low flame output. We sourced and tested a number of different units, before settling on this one, which performs great at low output. Uses 3/8" male flare fitting (included). Comes with steel orifice plate for regulating airflow The burner has a 9 7/8" diameter and is 14 3/4" long This banjo burner requires a propane regulator to function properly. We recommend a Wind Guard with these units if brewing outdoors. If using indoors, you must have proper ventilation in the form of an overhead cooking hood.
T-Corks are a great option for bottling your homemade concoctions.
Dimensions: Top section is 28mm wide by 13mm high, lower cork section (that goes into the bottle) is 19mm wide by 20mm high.
Bar Top T-corks offer the convenience of hand sealing, allowing you to easily reclose bottles
Whole natural cork stopper with black plastic head
Premium stoppers for premium spirits, distillates and other shelf stable beverages
19.2mm cork diameter | Fits standard cork finish (neck) wine bottles & 375mL Farro spirit bottles
Molinas Cork has been sustainability harvesting from the cork forests of Sardinia for over 100 years
Bark is aged an additional year prior to harvest, leading to less porous, higher quality cork
A high quality natural cork topped with a black plastic head. Unlike the competition, which typically uses synthetic or agglomerated (particle board) stoppers, we chose high grade whole natural cork that has been traditionally used. Steam treated for the reduction of TCA and other volatile compounds. MP TS is the ideal solution if you want to bottle your distillates using a traditional closure at an affordable rate. 19.2 mm cork diameter. Fits standard cork finish (neck) bottles & 375mL Farro spirit bottles.
Italy produces more wine than any country in the world and Molinas is the largest Italian cork supplier with over 1 billion corks produced annually. Molinas Cork was started over 100 years ago by Pietro Molinas on the Italian island of Sardinia. Besides its beautiful beaches and designation as one of the world's five Blue Zones, Sardinia is known for its large, government protected Cork tree forests.
Today, the 4th generation of the Molinas family sustainably harvests cork from these protected trees. Compared to most cork available in the market, the bark is allowed to mature an additional year. This leads to a less porous, higher quality cork, and has less impact on the forest. Throughout the entire process from tree to finished cork, quality control is strictly monitored. MoreFlavor! is proud to represent Molinas Cork in the USA
Tolerances on Normal Dimensions:
Height of the cork body: Nom. Value +/- 0,3 mm
Diameter of the cork body: Nom. Value +/- 0,3 mm
Height of the stud: Nom. Value +/- 0,2 mm
Diameter of the stud: Nom. Value +/- 0,2 mm
Characteristics Physical / Chemical / Sensory:
Humidity: Min: 3% Max: 8%
Peroxides: < 0,2 mg/stopper
Dust transfer: ≤ 1,5 mg/stopper
Organoleptic test: ≤ 2%
Final Treatments:
Genesis Steam treatment for the reduction of TCA and of other volatile compounds.
Washing: with a solution of H2O2.
Drying: a forced warm air for the elimination of peroxides residuals silicone coating fit to food contact.
Silicone lubricant and adhesives with food certification for food contact.
Bar Top T-corks offer the convenience of hand sealing, allowing you to easily reclose bottles
Synthetic cork stopper with black plastic head
19.5mm cork diameter | Fits standard cork finish (neck) wine bottles & 375mL Farro spirit bottles
Our bar top stopper corks have a smooth, black plastic bar top. Bar top corks are intended to fit tightly to eliminate leaking and maintain freshness of product. You may need to use a rubber mallet to install a bar top cork on a container with matching neck finish.
Easy to remove and reuse, bar top corks feature synthetic Expancork stems.
Dimensions: 1.18" head diameter; 0.77" (19.5mm) cork diameter; 1.22" total height.
Bar Top T-corks offer the convenience of hand sealing, allowing you to easily reclose bottles
Synthetic cork stopper with black beechwood head
22.6mm cork diameter | Fits 750mL Farro spirit bottles
Bar top corks featuring beech wood heads will give finish your product with a touch of style. Bar top corks are intended to fit tightly to eliminate leaking and maintain freshness of product. You may need to use a rubber mallet to install a bar top cork on a container with matching neck finish.
Easy to remove and reuse, bar top corks feature synthetic Expancork stems.
Dimensions: 1.34" head diameter; 0.89" (22.6mm) cork diameter; 1.34" total height.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Barebottle Brewing Company This light and refreshing lager has a Mexican pilsner framework with a German Helles twist Includes Crystal and Saaz hops Estimated ABV: 4.7% Estimated IBUs: 18 Makes 5 gallons of finished beer The most compelling stories always have a twist. Barebottle's award-winning Torcido is a Mexican pilsner with a German Helles twist. Combining these styles results in a light and refreshing lager that would make even M. Night Shyamalan do a double take. Originally developed by Barebottle brewer John "Magic" Montes De Oca, Torcido Torcido took gold in the International Pilsener category of the 2019 Great American Beer Fest and in turn became the inaugural inductee into the Viking Malt Hall of Fame. Brewed with Viking Pilsner, flaked corn, a dash of Carahell®, and hopped with two additions of Crystal and Saaz. Barebottle Brewing Company was born in San Francisco, CA with the idea that craft brewing shouldn't adhere to the strict guidelines of established beer styles. Founded by a trio of friends and former classmates, they continue to pay homage to their homebrewing roots by printing a scaled down version of their recipe on every label. If you ever see one of their creations out in the wild, we highly recommend that you buy it, drink it, and then brew it! Makes 5 gallons Estimated Original Gravity: 1.039-44 SRM (Color Range): 3-4 IBUs: 18 Estimated Alcohol Percentage: 4.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Barebottle Brewing Company This light and refreshing lager has a Mexican pilsner framework with a German Helles twist Includes Crystal and Saaz hops Estimated ABV: 4.7% Estimated IBUs: 18 Makes 5 gallons of finished beer The most compelling stories always have a twist. Barebottle's award-winning Torcido is a Mexican pilsner with a German Helles twist. Combining these styles results in a light and refreshing lager that would make even M. Night Shyamalan do a double take. Originally developed by Barebottle brewer John "Magic" Montes De Oca, Torcido took gold in the International Pilsener category of the 2019 Great American Beer Fest and in turn became the inaugural inductee into the Viking Malt Hall of Fame. The extract Torcido clone recipe is brewed with pilsen extract, flaked corn, a dash of Carahell®, and hopped with two additions of Crystal and Saaz. Barebottle Brewing Company was born in San Francisco, CA with the idea that craft brewing shouldn't adhere to the strict guidelines of established beer styles. Founded by a trio of friends and former classmates, they continue to pay homage to their homebrewing roots by printing a scaled down version of their recipe on every label. If you ever see one of their creations out in the wild, we highly recommend that you buy it, drink it, and then brew it! Makes 5 gallons Estimated Original Gravity: 1.039-44 SRM (Color Range): 3-4 IBUs: 18 Estimated Alcohol Percentage: 4.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Crafted from premium German Barke® barley, delivering a rich malt aroma with subtle toffee undertones
Optimal for a wide range of beer styles, including lagers, pilsners, ales, and bocks, enhancing body and flavor
Use as up to 100% of your grain bill
1.4 L - Made from the finest German two-row historical summer brewing barley Barke®. The long-loved characteristic malt aroma of Barke® is the perfect base for intensely flavorful bright lager beers. This results in an excellent body and a pronounced full-bodiedness.
Barke® has pronounced malt aromas with underlying toffee notes; pleasant, soft mouthfeel
Heirloom malt for malt-forward beer styles, typically for:
Pale Lager: American (Light) Lager, Munich Helles, Festbier, German Leichtbier, Dortmunder Export, Kellerbier (Pale Kellerbier), India Pale Lager
Pilsner: German Pilsner, American Pilsner
Amber Lager: Franconian Red Beer
Strong Lager: Imperial Pilsner
Bock: Light Bock, Dark Bock, Light Doppelbock
Pale Ale: British Mild, Belgian Blond Ale, Trappist Single, Session Pale Ale, English Summer Ale
IPA: Session IPA
Amber Ale: Scottish Light, Heavy and Export
Strong Ale: British Strong Ale
Wheat Beer: Gose
Malt Specification:
Color °L - 1.4 - 2.1
Moisture % - max. 5.0
Extract fine % dm - min. 80.5
Protein % dm - max. 9.5 - 11.5
Usage Rate - Up to 100%
Our Barleywine has a beautiful copper color, voluptuous body, and inviting smells of malt and hops
Includes Magnum and Cascade hops
Estimated ABV: 7.7%
Estimated IBUs: 82-88
Makes 5 gallons of finished beer
15 lbs of 2-row with 1 lb of Caravienne and 1lb of Caramunich malts for a rich crystal malt flavor. Huge flavor with good balance between malt and hops. This will age gracefully for years. Not for everyone, but those who like Barley Wines love this recipe.
Makes 5 gallons
Estimated Original Gravity:1.076-82
SRM Color Range: 11-16
IBUs: 82-88
Estimated Alcohol Percentage: 7.5-7.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Barleywine has a beautiful copper color, voluptuous body, and inviting smells of malt and hops
Includes Magnum and Cascade hops
Estimated ABV: 7.7%
Estimated IBUs: 82-88
Makes 5 gallons of finished beer
Barleywine - made from barley but can be aged like wine. Our Barleywine has a beautiful copper color, voluptuous body, and inviting smells of malt and hops. But don't let the good looks catch you off guard. This is a powerful beer with a bitter, yet balanced bite. The recipe includes 12 lbs of malt extract with Caravienne and Caramunich malts for steeping. Huge flavor with a good balance between malt and hops. This will age gracefully for years. Not for everyone, but those who like Barley Wines love this recipe.
Makes 5 gallons
Estimated Original Gravity:1.076-82
SRM Color Range: 11-16
IBUs: 82-88
Estimated Alcohol Percentage: 7.5-7.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Barrel Oxyfresh is great for cleaning out oak barrels or breaking in new barrels. It is much safer and easier to work with than soda ash. Formulated especially for commercial and home wineries.
Directions: Fill barrel halfway with cold water and dissolve 0.2 - 0.6 oz. per gallon of barrel capacity. Agitate to dissolve the product, then top with cold water and loosely bung barrel. Allow barrel to soak for 24 hours prior to draining and rinsing.
Cleans with oxygen; does not contain chlorine, bisulfites, organic compounds or phosphates.
A stackable, powder-coated metal barrel rack for storing two 30 gallon barrels. Made from powder coated steel in the USA by Western Square.
These racks are stable up to 6 racks high.
Dimensions
44.5" W x 24" L x 13.75" H. Barrels will be raised approximately 11.75" off the ground
A stackable, powder-coated metal barrel rack for storing two 60 gallon barrels. Manufactured in USA by Western Square. 7" spacing between horizontal bars allows space for accessing barrel bungs for top up. These barrel racks are perfectly suited for wine or beer. Powder coated steel for rust resistance. Because this item ships via freight truck it is not eligible for free shipping.
These racks are stable up to 6 racks high.
44 1/2" W x 30 3/4" L x 14 1/8" H
A powder-coated metal barrel rack for the home user with one 30 gallon barrel.
These racks are stable up to 6 racks high.
*Please note that this is a custom manufactured product in small volumes, which is why it is only slightly less expensive than the double rack or the 60 gal size single rack.
Approximate Dimensions: 8"H x 24"L x 15 "W
A powder-coated metal barrel rack that fits one 60 gallon barrel. Made in the USA by Western Square.
These racks are stable up to 6 racks high.
*Please note that this is a custom manufactured product, which is why it is barely less expensive than the double rack.
This is just the spinning spray head. We use this as part of our complete barrel washer, WE492. Some clever customers have asked for just this head so that they can fabricate their own washer. Features female 3/4" NPT threads for attachment.
Height 3". Diameter 1 3/8"
Low volume jar fermenter perfect for small batch pickling
Includes airlock and stopper for fermentation
A second solid stopper is included to plug the lid and use the jar for storage
This simple food fermentation kit is the ideal choice for small batches as it requires very little brine to fill the jar and submerge your vegetables. Includes a 1L (33.8 oz) jar with flip top lid, two stoppers (one with hole and one solid), and a 3-piece airlock. Install the airlock during fermentation so gas can escape, and when fermentation is complete, replace it with the solid stopper to store your pickled vegetables.
Bavarian Wheat Extract is a great way to make traditional wheat beers with LME
Use a wheat malt substitute when brewing an extract version of an all-grain recipe
Made from 65% Malted Wheat and 35% Malted Barley
Can be used as 100% of your fermentable sugar in extract brewing
Add for color correction, boost gravity, or improve head retention in all grain brewing
A blend of 65% Malted Wheat, and 35% Malted Barley, this Bavarian Wheat Extract is a great way to make traditional wheat beers. Use this in any recipe that calls for wheat malt, or add some wheat character to your favorite pale or IPA!
Packaged in oxygen barrier foil bags that keep the extract from oxidizing. Does fresh extract make a difference ...decide for yourself!
We recommend customers store their extract in the refrigerator if they do not plan on using it within 8 weeks.
Replacement Burner For Bayou Classic® Cookers.
6-in Diameter x 11-in Length
Air Control Disc
Wide Range of Flame Control from a bare simmer to high flame
Laboratory grade borosilicate glass can be rapidly heated or cooled without cracking. This guy is great for collecting hydrometer or refractometer samples, weighing hop additions, or mixing water treatments.
