Outfit any 3" diameter draft tower with these stainless steel Intertap Tower Shanks with Duotight compatible tailpiece. The 1/4" barb pairs perfectly with the Duotight 6.35 mm x 8 mm reducer (DUO100), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718).
The Duotight fitting is sold separately and can be found below under "You Might Also Need".
Please note these shanks are not compatible with Perlick flow control faucets.
Kegland Part number: KL01137
Will thread into some body connects and form a seal with a dip tube gasket added.
For use when making your own custom equipment. With ball lock QD's. Female thread is at 5/16-24 -5 45° flare (SAE J512).
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Fits all male 1/2" NPT and BSP fittings
1/2" stainless steel barb tail
The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation.
These are ideal for the BrewZilla & DigiBoil ball valves, 25-Watt MKII Magnetic Drive Pump, or any 1/2" NPT or BSP connection.
Specs:
Stainless steel and silicone construction
Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced
1/2" (13mm) stainless steel barb tail with 3/8" (10mm) ID bore
KegLand Part Number: KL31639
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Please Note: The product description, photos, and instructions for this kit state that it includes CellarScience Foam Axe. Due to a supply shortage, this kit may contain FermCap S as a substitute. Both are excellent foam control agents and can be used interchangeably.
This is a no compromise, professional level hardware kit that allows for safe pressure fermentation in an X-Series Uni Conical. If you plan to ferment, or to seal/cap an active fermentation, in your BrewBuilt X-Series Conical you must use this Brewbult Kit for Fermenting Under Pressure. During fermentation Krausen can potentially clog the PRV that is built into the lid. The hardware in this kit is the same as what you will find on a commercial Unitank. This is not an all-in-one unit. All-in-one units are cheaper but not as safe.
Component Break Down:
Commercial Grade Spunding Valve - The kit is built around a commercial Spunding Valve that allows you to set your desired fermentation pressure. if that ferementation pressure exceeds your set point, it will blow off any excess pressure from the X-Series Conical. The clear cup holds liquid acting as an airlock and allowing krausen to exit. The Spunding valve is also adjustable.
Pro Grade PRV (Pressure Relief Valve) - On all brewery pro tanks, a tri-clamp PRV is always installed in addition to a Spunding Valve. This is because a Spunding Valve still has the potential to clog. The pro PRV has a very wide interior body as to reduce the risk of clogging. The PRV is non-adjustable and comes preset to relieve pressure at 15 PSI.
Sealed Pressure Gauge - This is a liquid filled, sealed gauge. The bottom of the gauge is a thin plate of stainless that moves up or down in relation to pressure in the tank. That causes the oil in the gauge to compress which is what the gauge reads. When properly sealed, there is no way krausen can get into this gauge and cause a false reading. However, it is important to ensure the guage is sealed, otherwise, there is a risk that krasuen clogs the gauge giving you an inaccurate reading.
Foam Axe - Foam Axe is a silica-based krausen cutter used by commercial breweries to reduce krausen blow off while increasing foam retention in your beer. Using Foam Axe is required for every batch fermented under pressure, but we recommend it for all batches fermented in your X-Series Conical. Foam Axe helps keep krausen out of PRVs and other hardware which is always a good idea.
When your BrewBuilt Uni is outfitted with a Kit for Pressure Fermentation there are three devices for relieving pressure, including the PRV that is always built into the lid, the adjustable Spunding Valve, and the pro grade PRV.
Includes:
Commercial Grade BrewBuilt Spunding Valve
1 BAR (0.3–14.5 psi)
Hand Adjustable Blowoff
1.5" tri-clamp Connection
Made from 304 stainless steel with plastic liquid cup
Tri-Clamp Pressure Relief Valve (PRV)
Calibrated to 1 BAR (14.5 psi)
1.5" tri-clamp connection
Made from 304 stainless steel
Sealed, Liquid Filled Pressure Gauge
Calibrated to 2 BAR (30 psi)
1.5" tri-clamp connection
Made from 304 stainless steel
CellarScience Foam Axe Krausen Reducer
Reduces krausen build up inside the fermenter
Connection Hardware
(3) 1.5" T.C. Clamps
(3) 1.5" EPDM T.C. Gaskets
WARNING! The use of the BrewBuilt Kit for Fermenting Under Pressure is required for performing Pressure Fermentations in your X-Series conical. The PRV built into the lid is not designed to be the only release point during a pressure fermentation.
WARNING! The use of Foam Axe is required to reduce krausen (foam from fermentation) production in the fermenter.
WARNING! Always release pressure, then remove the PRV built into the lid to ensure the conical is completely depressurized before removing fittings or the lid clamp. Failure to do so can result in personal injury.
Kit for dryhopping and adding other ingredients to a pressurized fermenter without oxygen. This is the correct size for the Brewtools F150 Unitank.
Included in the box:
Butterfly-valve, TC 4"
TC Adapter, 4" til 34mm
TC Pipe, 4", L=200mm
Tri Clamp, 4" (2 pcs)
Tri Clamp, 34mm (3 pcs)
TC34mm Manual PRV
TC34mm Ball Lock connector, Gas
TC Tee, 34mm, L=60mm
TC Gasket, 4", (3 pcs)
TC Gasket, 34mm DN20, 5-pack
The volume of the HopDrop Kit is 1.5L. Pellet capacity in weight will vary
Standard D-Style keg coupler works with virtually all American-made commercial beer sanke kegs
Durable stainless steel construction ensures longevity and corrosion resistance for both the coupler body and keg probe
Easy pull-style lever handle simplifies keg connection and disconnection for user convenience
Includes 3/8" OD barb for gas inlet
The KOMOS D-Style Keg Coupler is your reliable choice for dispensing standard American sanke kegs. Enjoy the peace of mind that comes with a robust, stainless steel construction, including the coupler body and keg probe, ensuring lasting durability and resistance to corrosion. The D-Style beer tap is the most commonly-used keg coupler in the U.S.
The intuitive pull-to-engage lever handle makes connecting and disconnecting a breeze. An included 3/8" OD barb simplifies gas inlet setup, and the built-in pressure relief valve adds a layer of safety. This D-style coupler, the industry standard, is compatible with virtually all American-made commercial draft beer sanke kegs. The upgrade to 304 stainless steel from nickel-plated options provides a significant increase in lifespan, ensuring years of use.
For a complete setup, tail piece, hex nut, and gasket for the beer outlet are sold separately and are available in a variety of sizes and styles.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with every KOMOS Kegerator, featuring Intertap stainless steel faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Stainless Intertap Faucets and Towers
These kits come with Intertap faucets mounted on a brushed stainless tower. Intertap faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. Forward-sealing means that while in the closed position the faucet will keep beer inside the body instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Intertap faucets feature a modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower
Intertap faucet(s)
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Beverage line measures 4mm ID x 8mm OD
Gas line measures 5mm ID x 8mm OD
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
16 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
This insulated tubing kit was developed specifically for the BrewBuilt Jacketed Conical. It has all the fittings needed to connect an IceMaster Glycol Chiller to the conical jacket's 1.5" tri-clamp inlet and outlet—plus premium quick disconnects with shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.
Insulated tubing will now only provide increased chilling efficiency, it will also eliminate line sweating so you don't need to wipe up puddles of condensation that might collect on your brewery's floor during fermentation or cold crashing.
Kit Includes:
1 - Insulated Tubing Set (2 x 6' lines)
2 - High Temp Plastic Female QDs w/ 3/8" Barb
2 - High Temp Plastic Male QDs w/ 1/2" MPT
2 - 1.5" Tri-Clamps
2 - 1.5" T.C. Gaskets
2 - 1.5" T.C. x 1/2" FPT Adapters
The Intertap faucet is a forward sealing faucet with a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout.
In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour.
Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.
The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.
Made of chrome plated brass.
Kegland Part number: KL00987
Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds
Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator
Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg
All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners
Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired
The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes!
The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines.
One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI.
Don't need 6 gas lines? Check out the 4-Way Duotight Draft Regulator Board.
Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below.
Stepping Down Pressure
The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability.
Ideal regulation scenario (10 PSI less than inlet pressure)
Example of 30 PSI inlet translating to 0–20 PSI output
Kit Includes:
6-Output Gas Board
(6) Duotight In-Line Regulators
(6) Duotight Check Valves
(6) Duotight Shut Off Valves (if selected above)
(5) Duotight Tees
(1) Duotight Elbow
(23) Rigid Plastic Joiners
NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.
This stopper has two holes and we use it in the production of our #10 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all these fittings into it, it still fits a plastic carboy neck! Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!
An ideal quick disconnect option for mobile draft dispensing! No fussing with adapters, adding multiple points of failure. Simply attach your draft faucet! Pairs perfectly with the NukaTap Flow Control faucet so you can adjust beverage flow when you're on the go When you're serving beer out in the wild, it's best to keep things simple. This ball lock quick disconnect does just that by allowing you to connect your beer faucet directly without the need for a separate adapter. Leave the draft line and picnic tap at home and pour beer directly from your ball lock keg! Compatible with NukaTap, Intertap and standard beer faucets. We highly recommend the NukaTap Flow Control faucet for use with this ball lock QD. Being able to dial in the flow on a portable draft setup can be a huge advantage and means less fussing with the gas pressure. As the FC model uses the hard plastic flow control shuttle to form a seal, it's best to use a collar pin wrench to firmly tighten the connection. For a little extra insurance, pair the faucet with the Self-Closing Spring to keep the tap closed when not in use. KegLand Part Number: KL22859
Leak-free quick connectors are well suited for glycol to cool fermenters.
Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.
Leak-free quick connectors are well suited for glycol to cool fermenters.
Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.
Keep your Anvil Brewing Pump operating at peak performance with this replacement O-ring. Designed for a precise fit, this durable O-ring ensures a secure and leak-free seal, essential for maintaining the efficiency and reliability of your brewing pump. Whether you need a replacement for a worn-out part or want a spare on hand, this high-quality O-ring is a must-have for every brewer looking to avoid downtime and achieve consistent results.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
Get that eye-catching cascading effect by serving your Stouts & Porters with a nitrogen tank filled with beer gas mix!
Serve still beverages on draft with pure nitrogen or argon—serving still bevs with CO2 will lead to carbonation over time
Dual high-pressure and low-pressure gauges to easily reference cylinder pressure and output pressure
CGA580 inlet compatible with standard US nitrogen and argon tanks
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
This Taprite Nitrogen Regulator will allow you to add Nitro-Draft capability to your home dispense system!
Use this dual gauge nitrogen regulator to connect a tank of Beer Gas mix (70% Nitorgen/30% CO2) to your keg for an authentic nitro-pour! Traditionally used for stouts and porters, a nitro pour is becoming popular with more and more beer styles, lending its signature creamy mouthfeel and head to the beer. An amazing upgrade to any brewer's draft system.
Made in the USA by Taprite. 5/16" barb.
Turn your Intertap or Nukatap faucet into a self-closing faucet with the use of this stainless steel faucet spring. Forces the tap handle back to the closed position when you let go. This spring is designed to work with the Intertap Stainless Steel shanks, though we have found it also works with our D1245A. Made from 304 Stainless Steel. Not compatible with Flow Control faucet models or other brands of faucets. Kegland Part number: KL00994
This Duotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06934
Replacement Ball Valve for the Gen 3 BrewZilla / DigiBoil. Silicone washer and stainless nut included, but not pictured.
Not compatible with BrewZilla Gen 4.
1/2" MPT
13.5 mm barb (apprx. 1/2")
304 stainless steel construction
KegLand Part Number: KL03728
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
1/4" flared inline check valve can be used with any flare threaded ball lock or pin lock quick disconnect Allows gas to flow out, but won't allow backflow of liquid into your gas system Ideal safety measure if you force carbonate your beer using the bev out dip tube Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs (male flare threaded side only) CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Add this inline check valve to any flared gas-in disconnect and protect your draft system! The check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it: Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting. If you're looking for a ball lock disconnect with a built-in check valve, we highly recommend KEG729. However, the beauty of this inline check valve is that it can be used with any flared disconnect, including pin locks. If you don't want to part with your high-quality stainless steel disconnects, this inline check valve is for you!
Fix your old, stuck, or leaky faucet with new washers!
Most faucets that aren't working properly, just need a good cleaning and some new washers
Fits most American beer faucets, including D1200, D1205, D1207, and D1215
Does not work on stout, forward sealing, or European faucets
Fix an old faucet that is still functionally sound but is old, leaking or just hard to use. Fits our faucets D1200, D1205,D1207, & D1215 and 95% of all beer faucets ever made.
Does not work on stout faucets, the sealed forward faucets, Perlick faucets, nor European faucets.
Stainless steel valve for Sansone fusti tanks. Recommended for use with wine and other low viscosity liquids. For water dispensing, we recommend the 316 SS Fusti Tap. 1/2" BSP Made from 304 stainless steel NSF certified.
A sealed pressure gauge is the most sanitary and safest solution for your needs. Designed to prevent krousen from plugging the gauge, it ensures longer-lasting performance and unparalleled reliability.
This 1.5" tri-clamp pressure gauge is included with the BrewBuilt™ Kit for Fermenting Under Pressure but can be used with any stainless steel conical fermenter with 1.5" T.C. ports. Liquid filled gauges offer better performance and longer lifespan compared to dry gauges. Dial face reads in both psi and BAR.
Sealed, liquid filled pressure gauge
0-30 psi
0-2.05 BAR
1.5" tri-clamp connection
Made from 304 stainless steel
Ensure airtight fermentation with the Foundry™ Lid Seal, designed for a perfect, secure fit on 6.5 and 10.5-gallon systems. Improve your brewing results with a reliable, high-quality seal made for optimal performance.
3/8" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 5/16" OD - 3/8"
D-Type keg coupler for standard American sanke kegs Stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style sanke keg beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the keg coupler you’ll need. Made in America by Taprite, this keg coupler features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. It features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
Replacement internal gasket for the ForgeFit 2" T.C. Sight Glass. There is a gasket at both ends of the sight glass, so be sure to order two if you need to replace both gaskets.
