Replacement lid gasket for 60L - 500L Speidel Rectangular Plastic Storage tank lids. Please note these replacement gaskets are for the newer generation tanks introduced in 2017. A redesign of the lid called for a different sized gasket. The new generation gaskets are 7-3/4" in diameter and 3/8" thick. The older generation gaskets are 7" in diameter, and 1/4" thick. For the Pre 2017 lid gasket please see FE736.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 2.5" tri-clamp fittings
Made from Silicone
Temperature rated from -30°F to 300°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
This tailpiece is a replacement for the gas-in barb that comes mounted on our D1505 Sanke Tap. It will not work as a 5/16" beer line connection due to the lip on the back side of the fitting.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
Kit for dryhopping and adding other ingredients to a pressurized fermenter without oxygen. This is the correct size for the Brewtools F40 and F80 Unitanks.
Included in the box:
Butterfly-valve, TC 3"
TC Adapter, 3" to 34mm
TC Pipe, 3", L=200mm
Tri Clamp, 3" (2 pcs)
Tri Clamp, 34mm (3 pcs)
TC34mm Manual PRV
TC34mm Ball Lock connector, Gas
TC Tee, 34mm, L=60mm
TC Gasket, 3", (3 pcs)
TC Gasket, 34mm DN20, 5-pack
Mount your FTSs control unit to the thermowell port of your SS Brewmaster Edition Chronical or Standard Brite Tank!
Features:
Matte Black painted stainless
Mounts on thermowell port
Custom built to fit FTSs digital controllers
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
5-1/8" - Total Length (Tip to Tip)
4" - Shank Length (Without Nut & Barb)
3" - Thread Length
2-1/2" - Pass Through Length
Kegland Part number: KL01113
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The current estimated availability is October.
Replacement silicone lid gasket for the Turbo 500 Boiler (BE449). Needed when converting the Grainfather Brewing System (AG605) for use with a T500 Condenser (DS200 or DS205).
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through
Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
This is a stainless steel shank with chrome plated brass hex nuts.
Dimensions:
4" - Shank Length
4" - Thread Length
2-3/4" - Pass Through Length
Max length with hex nuts at either end
Does not account for nuts/nipples you may install
Male Beer Thread (5/8" BSP)
Keep the flies away and pesky microbes at bay with these beer faucet brush-style plugs. Made to sit flush when inserted into Intertap, NukaTap and Perlick brand faucets. Easily cleans your faucet spout and can be left in place when the tap is not in use. For the most sanitary seal possible, give the brush a good spray down with sanitizer before plugging the faucet.
Comes in 2-pack.
Ball Lock adapter (Gas) to TC 34mm. The adapter is made for CMB or other gas-fittings.
M16x1.5mm inside threads for accessories.
The Gas model is identified with a groove near the TC connector.
Replacement internal gasket for the ForgeFit 1.5" T.C. Sight Glass. There is a gasket at both ends of the sight glass, so be sure to order two if you need to replace both gaskets.
All the crucial features of a top-shelf brew kettle at an incredible price! These kettles are the perfect choice for new brewers leaving the kitchen stove and stepping up to the full boil brewing method Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 8.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 13.75" Tall x 13.75" Ø 1 mm thick walls Made from 201 Stainless Steel Approximate Internal Dimensions 13.75" tall 13.75" wide. This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
This is a replacement cap for our line of Speidel Plastic Fermenters. It has a gasketed seal, and serves to close the fermenter. This is also the same cap used on our Speidel Tank Airlocks.
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL00826
Butterfly Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes butterly valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place.
Includes:
(1) Stainless 1.5" Tri-Clamp Butterfly Valve
(1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter
(3) Stainless 1.5" Tri-Clamp
(3) EPDM 1.5" Tri-Clamp Gasket
(1) Stainless 1.5" End Cap
Standard, plunger-style sample valves can be a bit of hassle when it's time to check your gravity or do a taste test. Replace it with this simple T.C. x Draft Shank adapter which allows you to pour samples with your preferred beer faucet. We recommend using the NukaTap Flow Control Faucet with Self-Closing Spring. This will allow you to put some restriction on the beer flow and come in very handy when taking samples from a pressurized conical or brite tank. Also compatible with Intertap, Perlick, and other faucets. Please note: standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
This is a Blichmann Spare Part. 1/2" tri-clamp gasket. This is the gasket used on the Blichmann Fermenator's racking arm.
Note: Each order comes with one gasket.
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included.
Remember to order clamp and gasket for the top port.
For User Manuals and support, please follow this link to Brewtools Docs.
No more boil overs, no more blow-off tubes. Once you’ve used Foam Control you’ll never brew without it again! Foam control does just what its name suggests--it reduces foam production during the hot-break portion of the boil, and it reduces the amount of krausen developed during fermentation. Also known as FermCap S, Foam Control does not affect the head on your finished beer. In fact, it can actually increase the head by retaining head-forming compounds that would have been blown off during fermentation. It will settle-out of your beer before bottling or kegging as it is actually absorbed onto the surface of the yeast cells and filter media. Add two drops per gallon at start of fermentation. Comes in an eye dropper bottle for easy use. 1 oz is good for about 50 x 5-gallon batches of beer. Also available in bulk 1 gallon size. Note: Keeps best when stored in the refrigerator. Like Foam Control (FermCap S)? Then you will love CellarScience® Foam Axe - Anti Foaming Agent!
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.
MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
Teflon gaskets have the widest temperature range but they can be harder to get a good seal when compared to silicone and EPDM. Teflon gaskets are primarily used where the fitting may need to be rotated in place, such as a rotating racking arm.
For 2" tri-clamp fittings
Made from Teflon
Temperature rated from -100°F to 500°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Replacement O-ring for beer faucet tower shanks D1239 and D1242.
This O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet.
KegLand Part Number: KL88067
For you, The Discerning Kegger, these Perlick beer faucets are a thing of beauty. When you draw off a pint, they look good, operate smoothly, and don’t gum up. They are a breeze to take apart for sanitizing. These design benefits will have you sold on the lifetime value of these taps.
#1 Design Benefit - Forward Sealing
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? In an ordinary, rear-sealing faucet, the entire faucet must drain out of beer. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain out. Because beer drains from the entire faucet the faucet remains sticky and is prone to contamination from the left over residue. The Perlick faucet, with its forward sealing design, only has beer drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination.
#2 Design Benefit - Stainless Steel
Standard old school faucets are made of brass that is plated in chrome. The chrome plating wears off and the Brass can pit. This can result in flavor contamination when your beer runs over exposed brass and pits which usually harbor bacteria.
In the late 90's, when the first stainless faucet was released, it cost close to $100. Wow. Now you can choose to get a traditional style faucet made out of stainless, but why would you bother when you can get this unique forward sealing design and stainless construction all in the same Perlick faucet?
Sure it costs a little more but you will never regret making the upgrade now.
The famous forward-sealing Perlick beer faucet, with the added feature of an integrated Flow Control valve!
Manage foaming issues when dispensing beer at home with this Perlick 650SS Beer Faucet with Flow Control. The new flow control feature makes it easy to reduce foaming no matter the type of beer line you’re using; leaving you with a nice, tall glass of crystal clear beer.
Constructed of 304 stainless steel to last a lifetime.
Buy two or more 650SS faucets from MoreBeer! and receive free shipping in the lower 48 states!
About Perlick Forward Sealing Beer Faucets:
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.
Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream.
The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket.
KegLand Part Number: KL11921
Do you have a kettle or cooler but would like the ease and convenience of using a ball valve to easily drain liquid? Are you a Do It Yourself Type person? At a fraction of the cost of having a spigot welded into your kettle you can drill a whole and install a weldless ball valve.
The problem with most weldless fittings is they are thrown together from assorted hardware. Common issues include leaking and lots of flex when you use the ball valve. These new weldless fittings feature are designed for brewing. There is no comparison to the weldless fittings of yesterday with their rock-solid feel and a solid leak free connection.
This unit is also unique in that it feature 1/2" female threads on the inside. This allows you to thread in various other fittings that you can see below. Want to later make a mashtun... no problem just thread in our stainless screen. want to fully drain your boil kettle? No problem, just add our kettle maximizer! This allows for unlimited flexibility.
Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included. This product replaces our WL101. Manufactured by Fermentap.
You will need to drill a 1" hole in your kettle for installation of this weldless spigot. We recommend a Step Drill Bit for this.
For cooler installation instructions, please see "Installing A Weldless Spigot In Your Cooler" under the documents tab.
Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning.
Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections.
Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access.
Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories.
Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets the passionate homebrewer's desire for customization. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze.
Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs.
BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale.
Build Your Own Brewing System:
This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle.
Major Features for Brewers:
High-Quality 304 stainless steel construction
Welded Dish Bottom for complete drainage - easy cleaning, no loss
High-Quality sanitary welded TC Ferrules
Handles with Silicone grips to avoid burning hands
Lid comes welded with TC port for CIP and other accessories down the road
Kettles are raised on legs for easy access to lower ports
Same Kettles used in our Next Generation BrewSculptures
Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal
Please Note: This kettle is designed for customization. All necessary hardware, including heating elements, valves, thermowells, and clamps, must be purchased separately to build your desired brewing system.
Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.
