The most affordable ball lock quick disconnect we offer!
White color easily identifies the QD for gas use
1/4" barb connection
This white, gas-in quick disconnect comes with a barb for attaching to a beverage line, and its high quality construction creates a sturdy seal that won’t leak gas when in use.
The barb measures 1/4 inch, so it is compatible with either 1/4 inch or 5/16 inch beverage tubing.
Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
Kegland Part Number: KL02943
We love these keg lids as either a replacement or an upgrade to the stock lid featured on many homebrew kegs. Most homebrew kegs feature a straight, parallel bale that sits extemely close to the lid when in the closed position. So close that it can be hard to get a finger or two under the bale to open it. The arms on this lid bend outward creating a nice, easy-to-grip handle to open and close the bale.
For use with Torpedo, Cornelius, and Firestone kegs. Comes with a pull-ring pressure relief valve and o-ring. PRV rated to 85 psi.
The highest quality plastic ball lock quick disconnect available to homebrewers
Smooth operation—clicks into place on keg posts and is easily removed
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Black plastic clearly identifies the disconnect as the liquid out QD
This black, beverage out quick disconnect comes with a flare for attaching to a beverage line, and it's made by CM Becker so you know it is high quality.
The flare threads measure 1/4 inch.
Note: Sometimes ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go. One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. With the 74g adapter piece, these cartridges can be used with the KegLand Core 360 Mini Regulator or Torpedo Mini CO2 Regulator. 5/8-18 UNF threading Kegland Part Number: KL16889 Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
Cooling your tower will make sure your beer stays cold from keg to glass. This fan kit blows cold air up your tower from your refrigerator which helps reduce foaming giving you a perfect pour everytime. The fan also gets rid of warm spots in your fridge by increasing air flow.
Kit Includes:
Fan box
12V power pack
Flexible tube
Kegland Part number: KL00819
This is the Fermentation Kit only. For the Corinical Keg check out BL27 or for the complete kit check out BL275. The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure. It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria. Features: Ferment, carbonate, and serve all from a single vessel Sanitary sample valve with rotating racking arm Keg can be used as a fermentor or a serving keg Cleaning made easy with a removable bottom 1.5 in. butterfly dump valve Rated up to 50 psi Made from sanitary stainless steel Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length. Duotight Push-to-Connect These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done! Compact The world's most compact ball lock disconnect ever manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is one of the only ball lock disconnects that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines. Overmolded Poppet The overmolded poppet design means you can couple and disconnect this ball lock QD under extreme pressures of up to 150 psi (higher than most kegs working pressure) and will never have issues with the o-ring blowing out. Tool-less Disassembly Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects. Extreme Chemical Resistance No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polyketone resin body, EPDM and PP/EPDM overmolded poppet. This makes the quick disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing. Toughness This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor — these bad boys are tough! High Flow The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects. Features: Ball Lock Quick Disconnect - Gas In Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Three sizes available: 6.35 mm (KL24242) 8 mm (KL20756) 9.5 mm (KL20770)
Standard D-Style keg coupler works with virtually all American-made commercial beer sanke kegs
Durable stainless steel construction ensures longevity and corrosion resistance for both the coupler body and keg probe
Easy pull-style lever handle simplifies keg connection and disconnection for user convenience
Includes 3/8" OD barb for gas inlet
The KOMOS D-Style Keg Coupler is your reliable choice for dispensing standard American sanke kegs. Enjoy the peace of mind that comes with a robust, stainless steel construction, including the coupler body and keg probe, ensuring lasting durability and resistance to corrosion. The D-Style beer tap is the most commonly-used keg coupler in the U.S.
The intuitive pull-to-engage lever handle makes connecting and disconnecting a breeze. An included 3/8" OD barb simplifies gas inlet setup, and the built-in pressure relief valve adds a layer of safety. This D-style coupler, the industry standard, is compatible with virtually all American-made commercial draft beer sanke kegs. The upgrade to 304 stainless steel from nickel-plated options provides a significant increase in lifespan, ensuring years of use.
For a complete setup, tail piece, hex nut, and gasket for the beer outlet are sold separately and are available in a variety of sizes and styles.
Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds
Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator
Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg
All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners
Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired
The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes!
The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines.
One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI.
Don't need 6 gas lines? Check out the 4-Way Duotight Draft Regulator Board.
Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below.
Stepping Down Pressure
The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability.
Ideal regulation scenario (10 PSI less than inlet pressure)
Example of 30 PSI inlet translating to 0–20 PSI output
Kit Includes:
6-Output Gas Board
(6) Duotight In-Line Regulators
(6) Duotight Check Valves
(6) Duotight Shut Off Valves (if selected above)
(5) Duotight Tees
(1) Duotight Elbow
(23) Rigid Plastic Joiners
NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Quickly carbonate your beer using the same process most large commercial breweries use!
Beer is carbonated and ready to drink in less than an hour
Easy to clean and sanitize
No one likes waiting, and the QuickCarb keg carbonator by Blichmann Engineering is the way to eliminate the wait from carbonating your homebrew. This high-pressure co2-injection system from Blichmann Engineering™ will carbonate a keg in 30 minutes, with no chance of over carbonating your beer. All connectors are included, and the unit hangs from the front of your keg.
Use is simple, just sanitize the unit using the built in pump, and connect hoses to your Keg and CO2 system. Turn on the gas, plug in the unit, and 30-40 minutes later, your beer will be perfectly carbonated. Cleanup is just as easy, as you can run cleaner and sanitizer through the system using the pump as well.
90% carbonated and ready to drink in less than an hour with no risk of overcarbonation! Let it sit for a day for dialing in that final few percent.
Quiet and dependable operation
Great for all beer styles!
All stainless diffusion stone and QuickConnector™ fittings makes cleaning a breeze
10 micron stainless diffusion stone is durable, and is porous enough to allow sanitizer to fully penetrate. Other manufacturers stones are delicate and must be boiled and handled with gloves.
Circulating pump is gentle and is powered with a simple DC transformer (included)
Easy to clean and sanitize
Interested in trying out inline oxygenation? Simply add an optional oxygen regulator and you'll be able to use the QuickCarb™ components to oxygenate your wort before pitching your yeast!
The ideal vessel for serving pre-mixed cocktails and other concoctions on draft
Easily pour in your beverage of choice through the wide corny-style lid opening without needing to remove the spear
Doubles as a line cleaning keg
Rolled handles for a comfortable grip
Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg!
Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams
The Torpedo Cocktail Keg is the ideal vessel for serving pre-mixed cocktails and other concoctions on draft. The corny keg style lid makes it easy to pour in your beverage of choice without having to fuss with removing the spear like with standard commercial sanke kegs. Hook up a D-Style keg coupler to begin carbonating the beverage from the bottom up. These kegs provide the added advantage of fully carbonating the entire cocktail. When making drinks on the fly, carbonation is lost quickly since you're mixing carbonated and still ingredients together. But when served from a fully carbonated keg, you can enjoy the bubbles in your glass for longer!
Draft lines needing some love? The Torpedo Cocktail keg easily doubles as a line cleaning keg. Simply fill with a batch of LLC or BLC to give your bev lines a little TLC.
Low2 Keg Lid O-ring
Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer.
Specifications:
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
ISO9001 Quality Assurance
Made from 304 Stainless Steel
Dimensions:
Height (in.)
Diameter (in.)
1.5 Gal
10
9 3/8
2.5 Gal
13 1/4
9 3/8
Super thick 8mm neoprene insulating jacket will keep your mini keg cold while you're on dispensing on the go
Heavy duty shoulder strap for easy transportation
Glow in the dark printed logo and high-vis strap for improved visibility after the sun has set
Pocket sleeves for extra 16g CO2 cartridges
The Mini Keg Parkas prioritize both insulation and portability. The 8mm neoprene insulating jacket keeps your beverage cold while dispensing. Features a glow-in-the-dark printing for improved visibility after dark, pocket sleeves for extra 16g CO2 cartridges, and heavy-duty shoulder strap for easy transportation.
Please Note: The 8L and 10L Mini Kegs share a parka size. If using it on the 8L Mini Keg, there will be a few inches of extra material at the top which you can leave as is or fold down if you prefer.
This BrewMaster Series kit was scaled down to a homebrew batch size from the original recipe by Weathered Souls Brewing Company
A malty powerhouse with delicious flavors from dark specialty malts and huge helpings of flaked grains
Includes Columbus and Cascade hops
Estimated ABV: 8.9%
Estimated IBUs: 66
Makes 5 gallons of finished beer
The Black is Beautiful initiative is a collaborative effort amongst the brewing community and craft beer lovers, in an attempt to bring awareness to the injustices that many people of color face daily. Started by Weathered Souls Brewing Co. in San Antonio, Texas, their mission is to bridge the gap that's been around for ages and provide a platform to show that the brewing community is an inclusive place for everyone of any color. They're calling for all breweries and brewers far and wide to raise a glass in unison and participate in this collaboration.
We at MoreBeer! are proud participants in this collaboration and strong believers that homebrewing is for everyone. We humbly invite our customers to contribute to those fighting for justice and equality while brewing delicious beer at the same time. 100% of the proceeds from our clone recipe Black is Beautiful kit are donated to the Michael James Jackson Foundation for Brewing & Distilling, which funds technical education and career advancement for black, indigenous, and people of color in the brewing and distilling industries.
Makes 5 gallons
Estimated Original Gravity: 1.077-82
SRM (Color Range): 38-43
IBUs: 66
Estimated Alcohol Percentage: 8.9%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing.
The 4 mm (5/32") ID size is perfect for homebrew draft applications where only a short beer line is needed. We recommend using 5-6 ft. per line for adequate flow resistance.
Outer Barrier
The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings.
Inner Barrier
The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while.
Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer!
Direct Connect to Ball Lock Kegs
This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD).
Specifications:
Inner Diameter - 4 mm (5/32")
Outer Diameter - 8 mm (5/16")
PVC, BPA , and Plasticizer Free*
Stiff outer wall is kink resistant and easy to use with Duotight fittings
Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up
*EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
Kegland Part number: KL06224
The Duotight Flow Stopper is a handy devicie to use while filling kegs or when transferring between kegs during filtering or after fining. Simply attach the Flow Stopper to the gas post of your keg, then when the keg is full it will automatically cut off flow and prevent excess beer from exiting your gas post and spilling onto the floor. For even better results, we recommend using the Flow Stopper with the BlowTie Spunding Valve. The BlowTie will enable you to apply head pressure to the keg, meaning you can control the flow speed and reduce the foam generated in the filling process. You will need a short length of 8 mm OD EVABarrier tubing to connect the BlowTie to the outlet of the Flow Stopper. Includes:
2 x Duotight 8 mm x 5/8" FPT (DUO104) 1 x Duotight 8 mm elbow (DUO107) 1 x Duotight 8 mm x 1/4 in. flare (DUO106) 1 x Ball float 1 x Stainless spring 2 x 8 mm OD EVABarrier joiners 1 x Acrylic sight glass Ball lock fitting and BlowTie spunding valve not included.
Kegland Part number: KL09393
The same cleaning product that brewers love, conveniently pre-measured into dissolvable tablets. PBW (Powder Brewery Wash) is a non-hazardous buffered alkaline brewer cleaner. It's the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals. It's effectiveness and ease of use has made it a go-to cleaning chemical for pros and home brewers alike. 10 g tablets are recommended for kegs, fermenters, and carboys. Use 1 tablet per 1 gallon of water. Also available in 2.5 g tablets, which are recommended for growlers, spray bottles, and glassware.
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
The highest quality plastic ball lock quick disconnect available to homebrewers
Smooth operation—clicks into place on keg posts and is easily removed
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Gray plastic clearly identifies the disconnect as the gas in QD
This white, beverage out quick disconnect comes with a barb for attaching to a gas line, and it's made by CM Becker so you know it is high quality.
1/4" flare connection.
Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
With your own Nitrogen tank, you can add Nitro-Draft capability to your Home Dispense System!
Serve beer on Nitro! The best way to pour your favorite stouts and porters!
Made from high-quality aluminum that will never rust like steel tanks
Fill with Beer Gas Mix to get that alluring, cascading pour famously associated with Guinness
CGA580 valve pairs with standard US-style nitrogen & argon gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Use pure nitrogen to serve still wine, cold brew coffee, Sangria and premixed cocktails on draft
Brand new aluminum 22 cubic feet Nitrogen tank made from high strength aluminum alloy and high quality CGA580 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It can be filled with compressed (liquified) Nitrogen, Argon, or Beer Gas Mix (70% Nitro/30% CO2).
Fill with beer gas mix (70% Nitrogen/30% CO2) for dispensing beers "On Nitro". Using 100% Nitrogen is also the recommended gas for dispensing cold brew coffee, wine, or even Sangria and premixed cocktails on draft!
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
DOT approved
New high quality CGA-580 valve
Light weight compared to steel tanks
Rated to 2216 PSI service / 3360 PSI test pressure PSI (allowing for Nitrogen fill)
Can also be filled with Argon or Beer Gas Mix (Nitrogen/CO2)
NOTE: You will need at Nitrogen/Argon Regulator to go with this tank, a standard CO2 regulator will not work.
To get the best pour possible you want to make sure your glass is free of dust, debris, and dish soap residue. The easiest way to do this is with a quick rinse of cold water right before pouring beer into the glass. This drip tray features a push-activated jet that can be hooked up to a pressurized keg or main water supply. To give your glass a quick spritz, simply press it down on the rinsing platform to activate the jet. The drip tray also has a pre-plumbed drain outlet to run to a nearby bucket or drain. For best results feed the jet clean, cold water at a pressure between 15 to 60 psi. If directly connecting to your main water supply, we recommend using an inline regulator to lower the water pressure as needed.
Specs:
Drain outlet - 1/2" OD
Water inlet - 1/4" OD
Glass Rinser - 4.25" diameter
Drip Tray - 18.1" x 7.1" x 1.2"
Made from 304 stainless steel
Kegland Part number: KL01434
Quickly check your fill volume when filling kegs with cold beverage
Sticker reacts to cold temperature, turning from yellow to green
Apply two stickers on 5-gallon kegs to run the full length of the keg
These keg filler stickers are designed to help you quickly check the fill volume, especially when filling cold beverages like cold-crashed beer. When the liquid inside is cold, the color changes from yellow to green. For 5-gallon kegs, you will need to apply 2 stickers if you want the gauge to run the full length of your keg.
Size: 8.85" x 0.47"
Color Warm: Yellow
Color Cold: Green
KegLand Part Number: KL42659
Enjoy a never-ending supply of soda water on tap with the Continuous Soda Carbonator Keg Lid. SodaStream units are great, but filling up those tiny 1L bottles is a pain, they're expensive to swap, and they run out quickly. Hook up your mains water supply to this Carbonator Keg Lid, compatible with any standard ball lock homebrew keg, and you'll never have to think about running out of sparkling water.
Setup:
Position the keg inside your fridge or kegerator (ideally below 40°F).
Attach your beverage draft line to the soda water out post.
Attach your gas line to the gas-in post.
Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line.
On first use, purge the air from the headspace of the keg.
Connect the mains water to the water inlet post on the lid of the keg.
We recommend also using a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 10-15 psi higher than your regulator set pressure (from Step 4).
That's it. This simple unit will give you continuous soda water connected to your mains water.
Please note: if you are using a CO2 regulator that uses a corny-style PRV, such as the KOMOS® regulator, you will need to swap out the standard Green PRV with the 0-100 psi Gray PRV so you can raise the pressure above 60 psi. Always check the pressure rating of your keg(s) before swapping the PRV.
KegLand Part Number: KL10955
The most affordable ball lock quick disconnect we offer!
Black color easily identifies the QD for beverage use
1/4" barb connection
This black, beverage out quick disconnect comes with a barb for attaching to a beverage line, and its high quality construction creates a sturdy seal that won’t leak gas or beer when in use.
The barb measures 1/4 inch, so 3/16 inch beverage tubing is recommend for the perfect fit.
Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
Kegland Part Number: KL02950
Made from a brand new 15.5 gal. keg with a 4" tri-clamp opening 1" yeast piping for easily moving dense yeast Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet Adjustable PRV for lowering pressure for long term storage 15.5 gal size, perfect for up to 10 bbl batches The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 10 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch. 1/2 bbl is perfect for up to a 10 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1 bbl size for up to 20 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense up to 40 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Sized for the ultimate brewing enthusiast who doesn't want to cycle through multiple tanks
Brand new aluminum 20 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 20 lb tank because it holds 20 lbs of compressed (liquified) CO2. 20 lbs of CO2 is enough to dispense about 40x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
27.5" T x 8 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Firestone Walker Brewing Company
A smooth amber ale with subtle oak notes blending perfectly with wonderful malt character
Includes Willamette and Kent Goldings hops
Estimated ABV: 5%
Estimated IBUs: 32-34
Makes 5 gallons of finished beer
Matt Brynildson of Firestone Walker Brewing Co., Paso Robles, California. It seems to some that Matt has almost been bred to brew beer. After getting a degree in chemistry in 1993, Matt went to work in Michigan doing research and development on hops for the brewing industry. In 1995, Matt went to the famous Seibel Institute of Brewing Technology to further his education. After brewing for Goose Island in Chicago and then moving to California to work for SLO Brewing, Matt was appointed Small Brewmaster of the Year in 2001. Later that year, he was asked to join the crew at Firestone Walker. Two years later Matt was dubbed Mid-Sized Brewer of the Year at the Great American Beer Fest AND at the World Cup of Beer, for a total of 12 medals in just three years! Since then, Firestone Walker has been gaining a large following in California due in part to it's flagship beer, Double Barrel Ale, which is produced in a Burton Union system that has the beer fermenting in barrels. Firestone Walker Brewing Company is the only brewery in the U.S. to ferment in barrels and one of only two in the world. In addition to the line-up at Firestone Walker, Matt also brews the Nectar Ales line of beers, as well as a few of the Trader Joe's house brands. Learn more at www.firestonebeer.com
Don't let the name fool you, this beer is easy on the oak, having been created so that all ingredients blend perfectly with one another, even the oak. In fact, the oak really takes a back seat to the wonderful malt characteristics that this beer presents, which may be hard to imagine once you realize there are 2 ounces of oak in this one! American base malt, a little Munich, some crystal, and that's it - simple, yet flavorful. Just how we like it. One can easily spend all night drinking this smooth amber ale ... in fact, many of us at MoreBeer! have done just that! The low bitterness ties everything together and makes you remember just how much of a craft brewing beer really is.
Makes 5 gallons
Estimated Original Gravity: 1.049-52
SRM (Color Range): 14
IBUs: 32-34
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Make quick work of transferring finished beer from fermenter to kegs with the easy-to-operate four station manual keg filler Optional Keg Filling FOBs stop flow automatically once the keg is full, eliminating waste and making it even easier for a single person to operate the filler Sight glass at the inlet allows you to monitor beer flow from the fermenter—check if you're pulling yeast or breaking CO2 out of solution Elevated sample port for purging air from the system before filling runs Made from high-quality Stainless Steel tri-clamp fittings, custom-welded stand, and reinforced silicone tubing Shorten the time it takes to do your least favorite task with the MB Keg Filler. Our Keg Filler was designed by renowned brewmaster Colin Kaminski to make filling kegs a simple process that can be completed quickly. Connect your tank to the keg filler via the 1.5" butterfly valve inlet, which will enable you to shut off flow if you run into any issues. Monitor flow with the sight glass to see if you're pulling yeast, if there's air present in the system, or if CO2 is breaking out of solution because you're filling too quickly. The highest point in the filler is a plunger-style sample valve sitting at the opposite end, allowing you purge air out of the system and minimize oxidation. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. The Manual Keg Filler is available with or without a Keg Filler FOB on each filling line. See the instructions below for operating the keg filling FOBs. 4-Head Keg Filling Station Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side Custom-welded compact stainless steel stand
The highest quality plastic ball lock quick disconnect available to homebrewers
Twist-to-connect style pin lock QD for pin lock style corny kegs
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Gray plastic clearly identifies the disconnect as the gas in QD
Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and grey quick disconnects are used for the gas in tank plug.
1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.
Replacement PCO38 tapping head. This is the tapping head only. For the full tapping head assembly see KG520. Comes with PCO38 female threads for attaching to the Oxebar Mono Keg and three PCCO1881 male threaded ports for attaching ball lock caps and PRV. KegLand Part Number: KL20169
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment.
Simcoe® Strike is a West Coast Pilsner-style beer with a crisp lager-like base, bold Simcoe® hop character, clean bitterness, and a white, frothy head that laces beautifully on the glass
Flavored with Simcoe® Cryo Hops®
Estimated ABV: 5.8%
Estimated IBUs: 30
Makes 5 gallons of finished beer
Simcoe® Strike West Coast Pilsner Flash Brewing® Kit
Simcoe® Strike is a West Coast Pilsner-style beer with a crisp lager-like base, bold Simcoe® hop character, clean bitterness, and a white, frothy head that laces beautifully on the glass. Its malt blend delivers a smooth, clean foundation with a subtle sweetness that supports the bright hop profile and refreshing finish.
Simcoe® Cryo Hops® contribute notes of citrus peel, grapefruit, light resin, and subtle pine, giving this beer a distinctly West Coast hop character while still keeping the crisp, drinkable nature of a Pilsner. Flash Yeast™ ensures a clean fermentation that lets the malt and hops shine. With Flash Yeast doing the work, this Pilsner can be fermented at a wide temperature range of 65°F to 85°F.
For the best clarity and smoothness, lagering is recommended at 40°F. Fermenting at around 70°F, this recipe finishes fermentation more quickly than a standard lager. This bright, hoppy, and refreshing beer can be ready to enjoy in just a few days. For the best clarity and smoothness, storing cold (lagering) for a couple of weeks is recommended. The best clarity and smoothness, storing cold (lagering) for a couple of weeks, is recommended.
Flash Brewing® Kits
Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. Flash Brewing® offers a streamlined process that not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.
Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.
If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions.
Equipment Required for Flash Brewing®
Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, check out the Flash Brewing® Starter Kit for 5-gallon recipes.
Includes:
Simcoe® Strike Flash Malt™: 6 lbs
Simcoe® Cryo Hops®: 2 oz
HopBite™: 30 IBU Shot
Flash Yeast™
Flash Brewing® Instructions
Simcoe® and Cryo Hops® are registered trademarks owned by Yakima Chief Hops, LLC.
Keep your cherished Corny Kegs in perfect working order with this set of gaskets and o-rings. Having a spare set on hand is usually all you need to get your keg up and running on a moment's notice.
Kit includes two gaskets for the dip tubes, two for the body connects and one lid o-ring. Be sure to replace the gaskets on any used keg you acquire. A corny keg that has been used for soda in the past should have its gaskets replaced because the soda flavor can never be removed from the rubber.
This kit works for Ball Lock and most Pin Lock corny kegs.
Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 1/4 in inside diameter (ID) tubing is standard for homebrew keg systems for both the gas and the beer lines.
Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 3/16 in inside diameter (ID) tubing is sometimes used for beer dispensing lines, where the smaller diameter provides more restriction and can reduce foaming.
Finally, a high-quality, stainless steel, handheld faucet for discerning beer servers on the go! For too long there have been no other option than the standard plastic picnic tap. Torpedo Keg decided to fill the void with a top-shelf mobile draft faucet made with stainless components and internal parts. You'll feel the quality in the smooth pouring action and love the weight of it in your hand. This is definitely not the beer tap you used in college!
1/4" OD outlet barb will work well with 1/4" or 3/16" ID draft tubing.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late November.
A-Type keg coupler fits most German beer kegs such as Paulaner and Spaten
Click-to-engage ergo lever handle
Includes 1/4" OD barbs for gas inlet and liquid outlet
Barb elbow outlet is ideal for low clearance keg storage and easier line routing
For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD.
This model features a pull-ring pressure relief valve (not pictured).
This Keg Tap Will Usually Fit:
Ayinger
Bitburger Pilsner
Delirium Tremens (Belgium)
Erdinger Hefetrub Weisse
Fischer
Franziskaner Hefe-Weisse
Hacker-Pschorr Weisse
Hoegaarden White
Isenbeck
Krombacher
Kronenbourg 1664
Paulaner
Spaten
Staropramen
Victoria Bitter
Warsteiner
KegLand Part number: KL06057
