Search results for "grainfather return"

A best seller for a reason! Tons of features at an incredible cost Crystal Clear super smooth PET makes fermenting and cleaning super easy 3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar. Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.  What's Included: FermZilla 27L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (1) Yellow Liquid Carbonation Cap (1) Red Gas Carbonation Cap Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 27 L (7.1 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 30.2" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.   Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47296 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla Tri-Conical 27L & 55L | User Guide

Read more less

Bursting with hop character with a smooth and creamy mouthfeel. Our best-selling Hazy IPA year after year Includes Warrior®, Citra®, and Mosaic® hops Estimated ABV: 6.4% Estimated IBUs: 28 Makes 5 gallons of finished beer Haze Craze is our take on the hazy New England IPA recipe. Also known as a North Eastern IPA, or Juicy IPA, it quickly became one of the most popular beer styles in the US. It packs all of the hop character that craft beer nerds love, and it's much softer and less bitter than classic West Coast IPAs, making it a much more approachable style for the uninitiated. The style accentuates hop character while maintaining a smooth and creamy mouthfeel. Light in color but hazy due to heavy dry hopping, yeast selection, as well as additions of oat and wheat. Low in bitterness with a huge hop character due to hop-bursting, this beer will satiate even the biggest hop head. NEIPA has become popular nationwide thanks to breweries like Tree House Brewing, The Alchemist, Hill Farmstead and Grimm Artisanal Ales. One taste of this delicious style will make a staple in your brew schedule.  Makes 5 gallons Estimated Original Gravity: 1.062-66 SRM (Color Range): 4.5 IBUs: 28 Estimated Alcohol Percentage: 6.4%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.  

Read more less

A crisp, golden pilsner with a light malt flavor and spicy hop flavor Includes Perle and Czech Saaz hops Estimated ABV: 4.5% Estimated IBUs: 25-32 Makes 5 gallons of finished beer Golden color with a light malt flavor. Bittering hops are Hallertau. The spicy hop flavor comes from the Czech Saaz and Hallertau hops that are added late in the boil. Low in fruity esters as is characteristic of this style. Added body comes from the addition of Dextrin Powder. Makes 5 gallons Estimated Original Gravity:1.046-50 SRM (Color Range): 4-5 IBUs: 25-32 Estimated Alcohol Percentage: 4.5% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

A Dry Stout in the style of Guinness with flaked barley for a wonderfully creamy head Includes a single addition of Magnum hops Estimated ABV: 6% Estimated IBUs: 41-45 Makes 5 gallons of finished beer Here it is, a Dry Stout in the style of Guinness. Flaked Barley helps to provide all the protein that is needed to produce that wonderfully creamy head. 43 IBU of bitterness compliments the dryness of the Roasted Barley to produce authentic Irish Dry Stout. The liquid yeast is of course from Irish decent. Makes 5 gallons Estimated Original Gravity: 1.060-64 SRM (Color Range): 35 IBUs: 41-45 Estimated Alcohol Percentage: 6% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.      

Read more less

Modeled after Big Sky Brewing's Moose Drool® Brown Ale, this malty brew is dripping with caramel, chocolate, and coffee flavors Includes Goldings, Liberty, and Willamette hops Estimated ABV: 4.5% Estimated IBUs: 47-49 Makes 5 gallons of finished beer Are you a fan of Moose Drool? This is MoreBeer!'s take on the popular brown ale from Big Sky Brewing. Combining 3 different steeping grains, our Brown Moose recipe is full of flavor! The chocolate malt, caramel 60L, and midnight wheat give this beer a nice light brown color and a taste that is light on the palate. Malt , caramel, chocolate, and coffee are just a few of the flavors you'll enjoy in this complex ale. If you like brown ales that leave you wanting more, but don't knock you off your feet, then this is the perfect recipe for you! Makes 5 gallons Estimated Original Gravity: 1.041-1.048 SRM: 18-21 IBUs: 47-49 Estimated Alcohol Percentage: 4-5%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.    

Read more less

Packed with almost a pound of hops, our Heady Topper® clone is bursting with hop flavor and aroma Includes Apollo, Centennial, Columbus, Simcoe®, and  Amarillo® hops as boil and dry hop additions Estimated ABV: 8.1% Estimated IBUs: 100+ Makes 5 gallons of finished beer Based off of one of the most exceptional east coast beers (in our humble opinion) on the market, this double IPA instantly became one of our favorite ingredient kits!  Our version of a Heady Topper clone recipe is packed with almost a pound of hops, and is definitely a beer that will have hopheads in hopheaven.   One of the first things we noticed when pouring this beer into the pint glass was the aroma.  With a dry hop addition consisting of Apollo, Centennial, Columbus, Simcoe®, and  Amarillo® hops, we weren't necessarily surprised.  Impressed is more like it.  A balanced malt profile helps to tame the bitterness, allowing the hop flavor and aroma to be the true star in this recipe. If you're a fan of IPAs, double IPAs, or anything having to do with hops, this Heady Topper clone is one beer you need to brew! Makes 5 gallons Estimated OG: 1.073-1.078 SRM (Color Range): 9 IBUs: 110 Estimated Alcohol Percentage: 8.1%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.   Simcoe® is a registered trademark owned by Yakima Chief Hops, LLC. Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.  

Read more less

One of our best-selling kits of all time, Irish Red Ale is decidedly malt-forward with a distinct caramel flavor Includes Northern Brewer and Willamette hops Estimated ABV: 4.8% Estimated IBUs: 39-46 Makes 5 gallons of finished beer Our Irish Red Ale recipe is hard to nail down as any specific style—similar to a big Amber Ale, but it's so unusual it does not really fit within any category. Malt character utterly dominates this beer's flavor profile, containing dark Crystal malts, including Special B, and a pinch of Roasted Barley for a deep, red color and a very distinctive caramel flavor. Irish Red Ale has been one of our most popular ingredient kits for many years, and continues to receive a lot of positive feedback from satisfied customers to this day. If you're going to be venturing into new realms of taste discovery, this is a winning ticket we can solidly recommend! Makes 5 gallons Estimated Original Gravity: 1.046-53 SRM (Color Range): 20-22 IBUs: 39-46 Estimated Alcohol Percentage: 4.5-5.0%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Ultimate Grain to Glass Combo Pack! Get the Gen 4 BrewZilla & FermZilla Easy-Grip Tri-Conical with all the best accessories at an unbeatable price! Brew extract or all grain batches on the BrewZilla; ferment, carbonate, and serve from the FermZilla. Everything you need from Grain to Glass! Comes with all of the most highly recommended accessories for the BrewZilla, including the Neoprene Jacket to speed up heating times, Hop Spider to keep vegetal matter out of your wort, and Chilling Connection kit so you're ready to use the Immersion Chiller out of the box Includes some of our favorite accessories for the FermZilla, such as the Pressure Kit with Floating Dip Tube so you're always racking the clearest beer and the Duotight BlowTie 2 for pressure fermentations and flow control keg transfers Over $100 savings when purchasing this kit bundle compared to buying everything piece-by-piece! Also available in 110V (AG580) You can search high and low, but you won't find a better deal than the BrewZilla Ultimate Grain to Glass Combo Pack! Combo Pack Includes: BrewZilla Brewing System | Gen 4.1 | 9.25G | 220V Neoprene Jacket Hop Spider Wort Chiller Connection Kit FermZilla Tri-Conical Fermenter | Gen 3.2 | 7.1G Plastic Pressure Kit w/ Floating Dip Tube Duotight BlowTie 2 Spunding Valve Insulating Jacket Gen 4 BrewZilla All-in-One Brewing System WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA 6-30P plug Requires NEMA 6-30R receptacle Requires 11 amps from 30 amp circuit Dual heating elements (1900 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 220–240V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge     FermZilla Tri-Conical Easy-Grip Fermenter A best seller for a reason! Tons of features at an incredible cost Crystal Clear super smooth PET makes fermenting and cleaning super easy 3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar. Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid and collection container, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer. What's Included: FermZilla 27L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (2) Yellow Liquid Carbonation Caps (2) Red Gas Carbonation Caps Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 27 L (7.1 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 30.2" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads. Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47296 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.   FermZilla Tri-Conical 27L & 55L | User Guide

Read more less

Pronounced dry character with tropical hop flavors of lemon, orange, grapefruit, passionfruit and mango Includes a Mosaic®, Amarillo®, and Citra® hops Estimated ABV: 6.8% Estimated IBUs: 37 Makes 5 gallons of finished beer Have you ever wished you could crush your enemies and consume their life force!? .... yeah *cough* nor have we. But the same can't be said for the Juicy Brut! This maniacal monarch didn’t gain support for his claim to the throne through strategic wedding arrangements, nor did he bring his challengers to heel through deftly negotiated treaties. Oh, no. He conquered the realm using his dry, brutish nature and sheer force of juiciness. When the Juicy Brut enters the fray wielding his pulp-stained battle axe, he yawps but one maxim -- no quarter! Juicy Brut IPA has a pronounced dry character with almost no malt sweetness, setting the stage for the Mosaic®, Amarillo® and Citra® hops to be on full display. Leaning heavily on whirlpool and post fermentation additions, the tropical flavor of these hops come bursting forth with aromas of lemon, orange, grapefruit, passionfruit and mango. We can offer only one piece of advice. Bend the knee and swear fealty to the Juicy Brut! This recipe was developed by our own award winning Brewmeister Vito Delucchi as he was researching and writing an Article on Brut IPAs for BYO (Brew Your Own Magazine). Curious about Brut IPAs? Vito also wrote an article for MoreBeer.com on the subject. You can check out that article here: There and Back Again, A Brut IPA Tale! Throw on your favorite traveling cloak and join Vito on his quest to unlock the mysteries of the amyloglucosidase enzyme and discover the best methods for brewing Brut IPAs. Makes 5 gallons Estimated Original Gravity: 1.053 SRM (Color Range): 4 IBUs: 37 Estimated Alcohol Percentage: 6.8% Ultra Ferm Included (AD364) Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC. Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.

Read more less

Pack all those holiday flavors into one glass. A malty, spiced ale with powdered ginger, cinnamon, and allspice Includes Northern Brewer and Willamette hops Estimated ABV: 5% Estimated IBUs: 26-30 Makes 5 gallons of finished beer A malty, red, spiced ale for the season with; powdered ginger, powdered cinnamon, and powdered allspice. Not over done so it can be enjoyed without becoming 'too much'. A very popular kit that we have been selling to rave reviews for many years now. Makes 5 gallons Estimated Original Gravity: 1.051-56 SRM (Color Range): 17-19 IBUs: 26-30 Estimated Alcohol Percentage: 5%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.      

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! Malt character is upfront and smooth, anchored by a humble addition of hops Includes 100% Liberty hops Estimated ABV: 4.7% Estimated IBUs: 13-15 Makes 5 gallons of finished beer Jonathan Plise has been making beer since the year 2000 - his first batch being a porter that was less than drinkable. He then spent the next few years researching and developing his recipes, fermentation regimen, and sanitation - Jonathan's most dramatic improvements came when he learned about oxygen and yeast starters. In 2006 he was awarded California Homebrewer of the Year sponsored by Sierra Nevada Brewing Co. Jonathan's Munich Helles is rich and complex. The malt is upfront and smooth, while being anchored by the low hop additions. He has won 9 awards with this recipe, including one Best of Show and a Gold at the NHC in 2005. Jonathan recommends White Labs WLP833 German Bock Yeast. Makes 5 gallons Estimated Original Gravity: 1.048-52 SRM (Color Range): 4 IBUs: 13-15 Estimated Alcohol Percentage: 4.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

Elevate your brewing game with the 220V 26 Gallon Gen 4 BrewZilla. This cutting-edge system combines more power & capcity with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch!   WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Heat Exchanger Dish The 100L BrewZilla comes standard with the Heat Exchanger Dish which redirects the flow of wort so that it spends more time exposed to the heating elements before reaching the center drain at the bottom of the kettle and being recirculated. Due to the concave bottom and central draining hole on the Gen 4 BrewZilla, recirculating wort will pass through the malt pipe and then down through the boiler false bottom following the path of least resistance. This can cause wort to make a B-line for the drainage hole and reduce the wort's exposure to the unit's heating elements. With the HED installed, wort will be directed to the edge of the BrewZilla base and pass over the elements for a longer period and reduce the time needed to heat to your set temperature. An optional accessory for the smaller units, but included as standard on the 100L BrewZilla. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Features: Gen 4.1 Stainless steel construction 26.4 gallon total capacity with a finished beer output of 15-20 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA L6-30P Plug Requires NEMA L6-30R receptacle Draws 30 amps. Ask your electrician if you need to oversize the circuit (3) 2,200W heating elements Stainless steel 1/2" ball valve for gravity draining or transferring via pump Heat exchanger dish included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 36" H (with recirculation arm) x 20.5" D (boiler only) Recommended max. grain bill: 41.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 5 gal/min Max Head: 11.15 ft. Voltage: 220–240V-AC Frequency: 50–60Hz Power: 25 watts Input/Output: 13mm barb You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. Wort Chiller for cooling We recommend either of the below counterflow chillers Copper Counterflow Chiller (WC130) BrewBuilt® Stainless Tri-Clamp Counterflow Chiller (WC140)   KegLand Part Number: KL32803 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge   RAPT Gen 4 BrewZilla | User Manual

Read more less

2.1-2.8 °L Simpsons - Golden Promise Malt grown in Scotland produces a clear, sweet wort that is the go to choice for Scotch Ales. Tasted raw it has a bit more sweetness than Maris Otter which has more a bready richness. Can be amazing in Pale Ales or IPA's where you want a malty base to fuse with the hops (Yum!). Also try it as a smaller percentage in any recipe to add complexity. Example Malt Analysis Moisture, % 3.4 Extract %, finely ground malt, as is 77.80 Extract %, finely ground malt, dry basis 80.50 Viscosity 1.58 Diastatic Power 71 Total Soluble Protein %, dry basis 4.30 Total Protein %, dry basis 9.64

Read more less

This hop-forward beer recipe kit is modeled after the highly sought-after Ballast Point Sculpin® IPA Bittered with Warrior® hops and finished with a beautiful blend of Cascade, Simcoe®, and Chinook late additions Estimated ABV: 7% Estimated IBUs: 62-69 Makes 5 gallons of finished beer Contrary to its name, Ugly Fish IPA is actually one of the most beautiful beers we have to offer!  Designed as a clone of the highly sought-after Ballast Point Sculpin® IPA, the Ugly Fish IPA is a hop masterpiece.  This beer starts with a very clean bitterness from Warrior® hops, and finishes with a beautiful blend of Cascade, Simcoe®, and Chinook late additions.  With almost 10 ounces of hops, the Ugly Fish IPA is definitely a hop forward beer, but does have a solid malt profile that stands up to those hops and helps to keep it reasonably balanced. If you're looking to treat your taste buds to a beer that we think has been hopped perfectly, we highly recommend the Ugly Fish IPA! Makes 5 gallons Estimated Original Gravity: 1.067-72 SRM (Color Range): 6-8 IBUs: 62-69 Estimated Alcohol Percentage: 7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.     Simcoe® and Warrior® are registered trademarks owned by Yakima Chief Hops, LLC.  

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. Each mash tun is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our mash tuns feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Designed for Efficiency and Usability: Experience the ultimate in grain management with the integrated grain door, allowing for easy and complete grain removal after mashing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports and the grain door, the mash tuns are raised on sturdy legs. BrewBuilt Mash Tuns are the same high-performance vessels used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Major Features for Brewers: Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Mash tuns are raised on legs for easy access to lower ports and grain door Same vessels used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Includes: BrewBuilt Dish Bottom Mash Tun with Grain Door Chute for Grain Door False Bottom Thermowell Butterfly Valve TC Clamps and Gaskets Lid with TC CIP port Feet  

Read more less

Everything that comes with our Premium kit plus our Kegging Starter Kit Skip the bottling process and serve your very first home brewed beer on draft! Includes the best-selling 5-gallon Torpedo Keg — a huge upgrade over standard ball lock Cornelius kegs Brand new 5 lb CO2 cylinder can be filled at your local homebrew shop or welding supply store Step-by-Step instructions included for both brewing and kegging/carbonating your finished beer Why dip your toes in the water when you can take a running start and cannonball right into the world of homebrewing? With the Premium Homebrew and Kegging Starter Kit you can skip the bottling-induced headaches and go straight to kegging your first batch. Get everything included in two of our most popular kits at an even better value! Starting with the brewing equipment, you'll receive everything that comes with our top-shelf Premium Homebrew Starter kit (BRKIT30). This includes a massive 8.5 gallon stainless steel brewing kettle, 7 gallon Fermonster fermenter, copper wort chiller, American Pale Ale ingredient kit, and all the time tested brewing equipment you need to make beer at home. The large volume kettle allows for Full-Boil brews, which can have lighter color and better hop flavors. No need to fuss with a funnel or siphon thanks to the included kettle spigot, which can be used to safely and easily transfer liquid from your kettle to your Fermonster fermenter. The Fermonster is the perfect vessel for your first batch, and the 7 gallon capacity means you won't have to upgrade down the road when you want to brew beer styles that foam a lot during fermentation. Several of the most popular upgrades for new homebrewers include a larger kettle, a larger fermenter, and a wort chiller. With this kit you can check off those boxes on Day 1! Brewing is a labor of love. But few love the labor of bottling their finished brew. Luckily for you, everything from the 5 gallon Torpedo Homebrew Kegging kit (KEG410) is also included. When your brew buddies swap bottling horror stories, just listen and nod your head politely. We won't tell anyone that you skipped the bottling stage entirely! This system is comprised of absolutely everything you need to dispense your homebrew on draft. The dual gauge regulator will tell you the pressure in the keg, as well as how much CO2 is left in the tank. Comes with an aluminum CO2 tank that will never rust. 5 feet of 3/16" ID beer line, ideal for draft systems, so your beer drops to the correct pressure and does not excessively foam in the glass. Last but not least, this system features the 5 gallon Torpedo Keg, an all stainless ball lock keg with a commercial style. These kegs are stackable and feature rolled handles that make transport a breeze. The Fermonster Fermenter - A Huge Upgrade Over Standard Buckets or Glass "Carboy" Water Bottles Unlike buckets or glass carboys, the Fermonster fermenter was designed for brewing beer. It is made from tough, clear, virgin grade PET plastic so you can see the magic of fermentation. Unlike glass it will never break and shatter if dropped. It represents a huge upgrade over traditional buckets because these fermenters are much less likely to get scratched. Scratches can hold bacteria that can cause off flavors in the beer. The Fermonster comes with a built-in spigot that eliminates a long time issue in homebrewing of having to start a siphon to transfer your beer to the bottling bucket after fermentation is over. The large 4" lid allows for easily adding yeast, hops, or other additions. We also really love the molded-in level markers that tell you exactly when you have reached your desired volume. We Don't Skimp on Cleaning and Sanitizing Proper cleaning and sanitizing is one of the core tenants of making great beer. Some starter kits utilize an all-in-one cleaner/sanitizer that does neither job well. We’ve included the best-selling sanitizer for brewing, Star San. We also include Craftmeister oxygen-based cleaning tablets that make cleaning your Fermonster Fermenter a breeze. Other Upgrades That Make Brewing Easier We’ve also made a few items standard that really make the brew day easier including a thermometer for temperature monitoring and a hydrometer with testing jar for measuring sugar levels. Our reusable mesh bags allow for the easy removal of spent grain and hops at the end of the boil. The included stainless spoon is a really nice upgrade over plastic when you are stirring boiling liquids. Easy, How-To Instructions & an Actual 800# We've taught hundreds of thousands of people how to brew in over 25 years. Our instructions are clear and simple to follow and will have you making great beer with batch number one. If you have any questions, call our on-staff brewmasters at 1-800-600-0033. In an age where 800-numbers and real customer service is going away, you can still call us and ask a question. Brewing Equipment Included: 7 Gallon Fermonster fermenter with built in spigot, stopper, and airlock 8.5 Gallon Stainless Steel Brew Kettle w/ thermometer port, stainless ball valve, internal volume markers, Silicone handle grips Copper Wort Chiller for quick cooling Food Grade Bucket for bottling Mesh bags for grain and hops on brew day A Thermometer for easy temperature management Hydrometer for making key sugar measurements Transfer Tubing Bottling Wand with shut off valve Sturdy Bottle Capper Bottle Caps Bottle Cleaning Brush Star San Sanitizer for true sanitizing Large Stainless Steel Spoon for mixing Craftmeister Cleaning Tablets for super easy cleaning Delicious American Pale Ale recipe kit with yeast Kegging Equipment Included: Brand New 5 Gallon Torpedo Ball Lock HomeBrew Keg Beer line assembly with hand held faucet New Aluminum 5 lb CO2 tank Gas line assembly Premium Dual Gauge regulator The CO2 tank is shipped empty. You can have it filled at a welding supply shop or see your Yellow Pages under Gas- Industrial, Medical.

Read more less

A very full, robust beer that is richer, maltier, and less bitter flavor than our American Brown Ale Includes 100% Northern Brewer hops Estimated ABV: 5% Estimated IBUs: 28-32 Makes 5 gallons of finished beer Our Nut Brown Ale has a richer, maltier, less bitter flavor than the American Brown Ale. Victory malt provides a nutty, biscuity flavor. A very full, robust beer.  This Nut Brown Ale recipe is an excellent option in the fall and winter months! Makes 5 gallons Estimated Original Gravity:1.052-55 SRM (Color Range): 16 IBUs: 28-32 Estimated Alcohol Percentage: 5%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.        

Read more less

One of our most complex recipe kits, this clone of North Coast Brewing Co.'s Old Rasputin continues to improve the longer it's aged Includes Apollo™, Northern Brewer, and Willamette hops Estimated ABV: 8.5-10% Estimated IBUs: 70-80 Makes 5 gallons of finished beer Wow.  If you've never tried the North Coast Brewing Co. Old Rasputin, then you need to brew our clone version of it.  If you have tried the North Coast Brewing Co. Old Rasputin, then you know what we're talking about, and need to brew our clone version of it! This imperial stout is one of our most complex recipe kits.  Not only because of the ingredients invovled (2 types of extract, 5 specialty malts, and 3 different hops!), but because of the mouthfeel, flavors, and aromas it provides.  This is also one of those beers that continues to improve the longer it's allowed to age.  Our Old Bearded Stout is bold, boasting an incredible roasty, bready flavors, and aromas of chocolate and coffee.  Coming in at right around 8.9%, this is a great beer to "just have one" of, but we won't blame you if you go for a second! Makes 5 gallons Estimated Original Gravity:1.083-93 SRM (Color Range): 38-39 IBUs: 70-80 Estimated Alcohol Percentage: 8.5-10%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. The Flash Pilsner is an homage to the classic Pilsner style, with a white, frothy head that laces beautifully on the glass Flavored with Hallertau Mittelfrüh pellet hops Estimated ABV: 5.8% Estimated IBUs: 30 Makes 5 gallons of finished beer Pilsner Flash Brewing® Kit The Flash Pilsner is an homage to the classic Pilsner style, with a white, frothy head that laces beautifully on the glass. Its malt blend delivers a smooth malt profile with a subtle sweetness that balances perfectly with the crisp, clean finish. Hallertau Mittelfrüh hops contribute delicate floral and spicy aromas, while Flash Yeast™ ensures a clean fermentation. With Flash Yeast doing the work, this Pilsner can be fermented at a wide temperature range of 65°F to 85°F. For the best clarity and smoothness, lagering is recommended at 40°F. Fermenting at around 70°F, this recipe finishes fermentation more quickly than a standard lager. This easy-drinking, refreshing beer can be ready to enjoy in just a few days. For the best clarity and smoothness, storing cold (lagering) for a couple weeks is recommended. Flash Brewing® Kits Introducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing® Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Pilsner Flash Malt™: 6 lbs Hallertau Mittelfrüh Pellet Hops: 1 oz HopBite™: 30 IBU Shot Flash Yeast™ Flash Brewing® Instructions  

Read more less

Copper-colored Festbier with a strong emphasis on German malt flavor Includes Hallertau and Saaz hops Estimated ABV: 5.6% Estimated IBUs: 10-11 Makes 5 gallons of finished beer This Oktoberfest beer recipe makes, in our slightly biased opinion, one of the best Oktoberfest beers out there! With a strong emphasis on the German malt flavor, it's sure to please anyone looking for a classic Oktoberfest beer.  It is a copper-colored Lager that achieves that malt flavor with lots of Pilsner malt extract. The use of Caravienne and Caramunich malts contribute the copper color and a unique, subdued toffee/malt flavor. First-addition hops are Hallertauer, while finishing-hops are Czech Saaz. Makes 5 gallons Estimated Original Gravity:1.056-60 SRM (Color Range): 10-11 IBUs: 21-25 Estimated Alcohol Percentage: 5.6% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.     Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

Malty with a huge Citra® hop presence, this is our clone of the nationally known and loved Zombie Dust Pale Ale by 3 Floyds Brewing Co! Includes 100% Citra® hops from boil to dry hop Estimated ABV: 6.4% Estimated IBUs: 52-56 Makes 5 gallons of finished beer Run! The walking dead hops are here!  The only thing different between Soulless Hop and actual zombies, is that you'll be running towards this beer, rather than running away!  Malty with a huge Citra® hop presence, this is our clone of the nationally known and loved Zombie Dust Pale Ale by 3 Floyds Brewing Co! This recipe falls right in line with the original featuring Munich, Crystal, and Carapils malts to create a smooth malt backbone with a nice mouthfeel. The only hop in this beautiful beer is Citra®, but there's a whole lot of it!  With half a pound per 5-gallon batch, the Soulless Hop Pale Ale is a prime example of just how amazing Citra® hops truly are! Makes 5 gallons Estimated Original Gravity: 1.060-1.065 SRM (Color Range): 7-9 IBUs: 52-56 Estimated Alcohol Percentage: 6.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.   Citra® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Pizza Port Brewing Company Great red color with a solid malt sweetness matched with a firm hop backbone Includes Magnum, Centennial, and Cascade hops Estimated ABV: 5.8% Estimated IBUs: 55-60 Makes 5 gallons of finished beer Shark Bite Red is the flagship beer of Pizza Port, and has been brewed more times than any of their standards. Great red color with a solid malt sweetness matched with a firm hop backbone, all for under 6% ABV. We recommend White Labs California Ale WLP001. Makes 5 gallons Estimated Original Gravity: 1.057-61 SRM (Color Range): 21 IBUs: 55-60 Estimated Alcohol Percentage: 5.8%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.  

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! A full-bodied, hop-forward beer recipe given to us by the late homebrewing legend—and our dear friend—Mike “Tasty” McDole Includes Northern Brewer and Cascade hops Estimated ABV: 5.2% Estimated IBUs: 40-44 Makes 5 gallons of finished beer This recipe comes from the late homebrewing legend—and our dear friend—Mike “Tasty” McDole. Mike is one of the best homebrewers we’ve ever known, and one of our original customers way back when the entire MoreBeer! operation fit inside a storage shed. Aside from brewing many award-winning beers, Tasty helped grow homebrewing as a hobby, and as a community, here in the Bay Area and well beyond. Mike's American Amber Ale earned him multiple 1st- and 2nd-place ribbons, including a Gold Medal at the National Homebrew Competition. We were after him for awhile for this recipe and he finally gave his consent, allowing this to be the 11th entry into MoreBeer!'s lineup of Signature Series kits. With over 12 lbs of malt and 4 rounds of hop additions, this is a full-bodied, hop-forward beer. When it comes time to drink this beer, raise one for Tasty! Tasty's All Grain Brewing Notes: Mineral adjustments: Ca - 110 ppm; Mg - 21 ppm; Na - 21ppm; SO4 - 333 ppm; Cl - 45 ppm. Adjust Mash and Sparge water to a PH of 5.6. Recommended Sacchrification rest for 90 minutes at 152°F, followed by a 15-minute raise to 170°F, and a 15-minute Mash Out rest at 170°F. Makes 5 gallons Estimated Original Gravity: 1.053-59 SRM (Color Range): 17 IBUs: 40-44 Estimated Alcohol Percentage: 5.2%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

A malt-forward beer with a hint of chocolate roastiness and caramel nuttiness Includes 100% Cascade hops Estimated ABV: 5.25% Estimated IBUs: 29-32 Makes 5 gallons of finished beer If you like maltiness emphasized with a hint of chocolate roastiness and subtle caramel nuttiness this is the beer for you. Medium-low to medium hop bitterness. Light brown to dark brown in color, often with ruby highlights. Makes 5 gallons Estimated Original Gravity: 1.046-1.052 SRM (Color Range): 22 IBUs: 29-32 Estimated Alcohol Percentage: 5.25%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

The flavor emphasis of this beer rests squarely on the synergy of maltiness, dark roasted malts, and oat flavor Includes Northern Brewer and British Kent Goldings hops Estimated ABV: 5.7% Estimated IBUs: 38-42 Makes 5 gallons of finished beer Our Oatmeal Stout is loaded to the brim with malt! A helping of Flaked Oats give this brew a smooth, almost slick, mouthfeel, while three different dark malts—Chocolate, Black Patent, and Roasted Barlery—combine for a very complex roast flavor. A lower bittering rate from a moddest hop addition allows the flavor emphasis to rest squarely on the synergy of maltiness, dark roasted malts, and oat flavor. Oatmeal Stout is one of our most consistently well-reviewed kits and comes highly recommended for anyone who appreciates a dark, roasty beer. Makes 5 gallons Estimated Original Gravity: 1.058-62 SRM (Color Range): 38 IBUs: 38-42 Estimated Alcohol Percentage: 5.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. The recommended yeast(s) can be found below. All grains will come milled.   Please Note: In order to better serve our customers, we are now offering our extract recipe kits with either Liquid Malt Extract (LME) or Dried Malt Extract (DME). The majority of our DME kits were converted from the LME version, which is why you may notice slight variances in the extract names and quantities on your recipe sheet. You may also find that your Specific Gravity and ABV% are slightly higher if you choose DME. Whether LME or DME, add all extracts provided according to the recipe sheet. For further details, please reference the conversion chart below.   MoreBeer! Extract Recipe Kit Conversion Chart   Liquid Malt Extract Dry Malt Extract 4 lbs 3.5 lbs 5 lbs 4 lbs 6 lbs 5 lbs 7 lbs 6 lbs 8 lbs 6.5 lbs 9 lbs 7 lbs Ultralight Malt Extract Golden Light DME Pale Malt Extract Golden Light DME Pilsner Malt Extract Pilsen Light DME    

Read more less

High alpha varietal with an incredibly smooth bittering agent Aroma Profile: Citrus, Grassy, Herbal, Stone Fruit, Woody Alpha Acids: 13.0 – 18.0% T-90 Hop Pellets Warrior® hops are a high alpha varietal with an incredibly smooth bittering agent. Though not typically used for their aromatic qualities, Warrior® hops can add mild notes or resin, citurs and herbs to your IPA or Pale Ale recipe. Typical Hop Statistics: Alpha Acids: 13.0 – 18.0% Beta Acids: 4.0 – 6.0% Total Oil: 1.0 – 2.5%   Warrior® is a registered trademark owned by Yakima Chief Ranches.

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   No Need to Upgrade Later, The X3 Comes Fully Loaded: Built-in external cooling jacket with 1.5" TC Ports Neoprene jacket for insulation Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs. The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible. Highest quality mirror polish finish inside and out Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation New Features: Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more 3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy! #BrewBuilt External Cooling Jacket When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation. 8” Tri-Clamp Top Port New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure. Extra Large 3” T.C. Dump Valve The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester. Reinforced Four-Leg Foundation There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery. The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare. Adjustable Feet The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time. Flex Chamber Collection Jar - Trub Separator & Yeast Harvester Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation. Pressure Pack with Clear Float Technology Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened. Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind. Other Features You’ll Love: Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off Stainless steel lid clamp with single-piece molded silicone gasket In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons X3 Accessories: BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation) The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual. Hop Bong Oxygen-Free Dry Hopping Device The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. High Roller Caster Set Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters. IceMaster Max 2 Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected. Immersion Heater The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Full List of X3 Conical Features: External Cooling Jacket with 1.5" Tri-Clamp connections Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down. Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories Neoprene insulation sleeve Wide base with 4 legs for stability 304 stainless steel construction Mirror polish finish Interior welds are the best in the business - uniquely ground and polished (1) 2“ TC port for direct immersion heaters (3) Horizontal welded cone ports (1) 8" Lid Cap Opening with 8” TC Clamp (5) 1.5" TC Lid Openings 3" TC bottom dump with 3" TC butterfly valve 1.5" Thermowell for inserting thermal probe (4) Adjustable feet Silicone tube for blow off Stainless 8” Three Piece Tri Clamp & one piece molded gasket Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations) For volume and dimensional specs, Download the PDF. Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.

Read more less

Our single-hop Hazy IPA series dedicated to expressing the newest hops when they hit the scene Includes 100% Nectaron® hops from boil, to whirlpool, to dry hopping Nectaron® Flavor/Aroma: Grapefruit, peach, pineapple Estimated ABV: 6.7% Estimated IBUs: 32 Makes 5 gallons of finished beer Heavenly Haze is our series of single-hop Hazy IPAs. Whenever a hip new hop hits the scene, we're as excited to brew with it as you are! We developed Heavenly Haze to use a straight-forward hazy IPA malt bill as a base that's shared between all Heavenly Haze recipe kits—the only thing that changes is your hop of choice! This allows you to really zero in on the different flavors and aromas of one particular hop, and it's how we recommend experiencing a new hop you haven't brewed with before. We'll continue to expand our Heavenly Haze series to include newly released hops that are perfect for NEIPAs, as well as circle back to include some of our favorite hazy hops that have long been available. Nectaron® is a dual purpose hop with intense notes of grapefruit, peach, and pineapple. Well suited for all hop forward styles including IPAs, New England IPAs, and Hazy Pale Ales. A triploid aroma type, developed in collaboration with New Zealand’s Plant & Food Research. Nectaron® Brand HORT4337 is a full sister to Waimea. Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 4-5 IBUs: 32 Estimated Alcohol Percentage: 6.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Nectaron® is a trademark owned by New Zealand Hops Limited Company

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Danville Brewing Company This celebration of hop flavor is packed with bright, citrusy tropical aromas that jump from the glass Includes Magnum, Cascade, Citra®, Mosaic®, and Strata hops Estimated ABV: 8.2% Estimated IBUs: 100 Makes 5 gallons of finished beer Chux DIPA from Danville Brewing Company in Danville, CA is all about the hops. This celebration of hop flavor is packed with bright, citrusy tropical aromas that jump from the glass! Most of the IBUs come from a "First Wort" addition of Magnum. This process refers to adding hops to your kettle as soon as you begin collecting wort from your completed mash, resulting in a very smooth bitterness up front. From there, healthy aroma additions of Cascade, Citra®, Mosaic®, and Strata are combined for an incredibly expressive Double IPA. Danville's Chux DIPA beat out 218 other entries to bring home Bronze in the Imperial India Pale Ale category at the Great American Beer Festival in 2017. Makes 5 gallons Estimated Original Gravity: 1.071-76 SRM (Color Range): 4-5 IBUs: 100 Estimated Alcohol Percentage: 8.2% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

The original Beer, Beer, and MoreBeer! stout recipe perfected over many years and many pints. Expect a very clean, precise dark malt flavor Includes Northern Brewer and British Kent Goldings hops Estimated ABV: 6% Estimated IBUs: 40-43 Makes 5 gallons of finished beer When we developed this stout over the years we were going for a flavor that was similar to Guinness but with reduced bitterness and more malt flavor. We use 1 lb of Roasted Barley and leave out the Chocolate and Black Patent found in many stouts. This provides for a very clean, precise dark malt flavor. We always talk customers into this kit and they are always thankful we did. Our best-selling stout recipe. Makes 5 gallons Estimated Original Gravity: 1.056-65 SRM (Color Range): 29 IBUs: 40-43 Estimated Alcohol Percentage: 5.6-6.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size from the original recipe by Weathered Souls Brewing Company A malty powerhouse with delicious flavors from dark specialty malts and huge helpings of flaked grains Includes Columbus and Cascade hops Estimated ABV: 8.9% Estimated IBUs: 66 Makes 5 gallons of finished beer The Black is Beautiful initiative is a collaborative effort amongst the brewing community and craft beer lovers, in an attempt to bring awareness to the injustices that many people of color face daily. Started by Weathered Souls Brewing Co. in San Antonio, Texas, their mission is to bridge the gap that's been around for ages and provide a platform to show that the brewing community is an inclusive place for everyone of any color. They're calling for all breweries and brewers far and wide to raise a glass in unison and participate in this collaboration. We at MoreBeer! are proud participants in this collaboration and strong believers that homebrewing is for everyone. We humbly invite our customers to contribute to those fighting for justice and equality while brewing delicious beer at the same time. 100% of the proceeds from our clone recipe Black is Beautiful kit are donated to the Michael James Jackson Foundation for Brewing & Distilling, which funds technical education and career advancement for black, indigenous, and people of color in the brewing and distilling industries. Makes 5 gallons Estimated Original Gravity: 1.077-82 SRM (Color Range): 38-43 IBUs: 66 Estimated Alcohol Percentage: 8.9% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in early 2027. The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won't find a more powerful feature rich product. Features: Switchable Between 120V 1600W and 240V 2800W for Faster Heating & Better Boils. Unique High Flow Grain Basket with 150% More Perforations to Virtually Eliminate Stuck Mashes. Large Capacity Increases Efficiency and Grain Capacity. Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds. Ultra Low Watt Density, Triple Element Heaters - Won't Scorch. Linear Digital Power Control and Solid-State Switching for Fine Tuning your Boil. Turbo 500 Distillation Ready. Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings. Optional External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too. Three Sizes Available: 18 Gallon for 10 gallon batches, 10.5 Gallon for 5 Gallon Batches and 6.5 Gallon for 2.5-3 Gallon Batches.   Caution! Do not CLAMP the lid in place while boiling. The steam buildup can lead to severe burns.  The lid should only be clamped when used for distillation. Read all instructions and practice safe brewing.

Read more less