Search results for "torpedo stainless disconnect"

An Intertap accessory that converts the spout of an Intertap faucet into a ball lock quick disconnect. One of the most popular uses is being able to connect the beverage side of your counter pressure filler without having to open your refrigerator door. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01052

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Built-in check valve to prevent liquid from backflowing into your draft system Smooth operation—clicks into place on keg posts and is easily removed Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD Sleep a little easier knowing this gas in ball lock with built-in check valve has your back. The internal check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it:  Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting.      Features: Internal Check Valve protects your system from liquid back flow Made in Germany and assembled in the USA by CMB. Extremely high quality for years of service. NSF Approved for Food Grade Service!

Read more less

This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Use the Duotight compatible stem to connect a 8mm or 9.5mm reducer, then attach EVABarrier draft line to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is ball lock fitting is also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: 6.5mm Duotight Compatible Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435

Read more less

Replacement Beverage Dip Tube for the standard Torpedo Kegs.

Read more less

Small hose clamp suitable for 3/16" to 5/8" OD tubing Go-to clamp for anywhere you need to secure tubing Made from stainless steel These Stainless Steel small hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case.  Our small clamps will fit hoses with 3/16" through 5/8" OD.

Read more less

Complete assembly for conveniently serving beer out of a pin lock style keg. Commonly used to serve on the go because there is no beer lines to get in the way! Comes with QD faucet adapter, stainless faucet with stainless steel shank, faucet knob and Pin lock beverage out quick disconnect.

Read more less

Replacement Beverage Dip Tube for the Megamouth Torpedo Kegs.

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease! These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N. In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.

Read more less

Replacement seal for barbed or flareed stainless ball lock quick disconnects from KegLand. Compatible with KEG732, KEG734, KEG745, & KEG746.  

Read more less

1/4" flared inline check valve can be used with any flare threaded ball lock or pin lock quick disconnect Allows gas to flow out, but won't allow backflow of liquid into your gas system Ideal safety measure if you force carbonate your beer using the bev out dip tube Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs (male flare threaded side only) CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Add this inline check valve to any flared gas-in disconnect and protect your draft system! The check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it: Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting. If you're looking for a ball lock disconnect with a built-in check valve, we highly recommend KEG729. However, the beauty of this inline check valve is that it can be used with any flared disconnect, including pin locks. If you don't want to part with your high-quality stainless steel disconnects, this inline check valve is for you!

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and black quick disconnects are used for the liquid out tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

This portable keg faucet will surely have your friends saying "Dang, that is way classier than a picnic tap!"    This Quick Disconnect Faucet Assembly comes in handy when you take your keg with you to a gathering. Pair it with a small CO2 injector (KEG950), and you won’t have to mess with tubing when you’re away from home.    Complete assembly. Comes with QD faucet adapter, stainless faucet, faucet knob and ball lock beverage out quick disconnect.

Read more less

If you want an easy way to balance your beer lines, this is the way to do it. One of the benefits of Flow Control disconnects is you don't need to rely on the small ID or line length to apply flow resistance. Rather than adjusting your line length or size, simply apply additional restriction directly on the Quick Disconnect (QD). This is perfect for people who want to serve a large range of beverages with differing carbonation levels without having to customize each line. Now with the added benefit of Duotight fittings built in. Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.   Flow Control QD vs. Flow Control Faucet One of the only drawbacks of flow control devices is that they inherently create a small amount of turbulence and therefore can cause foaming. In the past, flow control faucets have been the only common option. Flow control faucets are very popular but due to the fact that they are placed at the very end of the beer line they have no head pressure. As a result, any turbulence created can cause foaming and carbonation to come out of solution. Flow control ball lock disconnects like these on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. Even in the instance that high turbulence is created the beer will be far more resistant to foaming issues. For this reason, flow control ball lock disconnects like these have significantly better performance allowing you the flexibility to adjust line resistance easily but without the introduction of turbulence that creates foaming. It cannot fix over-carbonated beer, but it can reduce the amount of beer line you would need to pour without excessive foaming. Duotight Ball Lock QDs The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Push-to-Connect These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done! Compact The world's most compact ball lock disconnect ever manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is one of the only ball lock disconnects that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines. Overmolded Poppet The overmolded poppet design means you can couple and disconnect this ball lock QD under extreme pressures of up to 150 psi (higher than most kegs working pressure) and will never have issues with the o-ring blowing out. Tool-less Disassembly Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects. Extreme Chemical Resistance No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polyketone resin body, EPDM and PP/EPDM overmolded poppet. This makes the quick disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing. Toughness This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor — these bad boys are tough! Features: Ball Lock Quick Disconnect - Bev Out Adjustable flow rate Direct connect 8 mm EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning KegLand Part Number: KL21418

Read more less

1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel. We recommend using 3/16" ID tubing for a tight fit.

Read more less

Replacement Beverage Dip Tube for the standard 6 Gal Torpedo Keg.  

Read more less

U-Type keg coupler for Guinness and some other Euorpean beer kegs Stainless steel keg probe and coupler body Pull-style lever handle Includes 3/8" OD barb for gas inlet A special tap that is required for Guinness kegs. U-Type Tap. Also known as a keg coupler, coupling, or adapter. Will Usually Fit: Abby White Boddingtons Pub Ale Guinness Stout Harp Kilkenny Leffe Magners Smithwicks Ale

Read more less

Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits!  This connection kit includes everything necessary to hook up two Ball Lock kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!   KOMOS Dual Tap Ball Lock Connection Kit includes: 3 x 5 ft. lengths of 5/16" CO2 Tubing 2 x Ball Lock Gas In Disconnects 2 x Ball Lock Bev Out Disconnects 2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces Two-Way Aluminum Air Manifold Hose Clamps and Rubber Washers This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 3/8" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

The fitting is to be used in a KegLand Stainless Steel Quick Swivel Connectors in 1/2" Female NPT. This is the end cap only. Handy for terminating 1/2" Quick Swivel Connections. KegLand Part Number: KL31646

Read more less

Stainless dip tube and thermowell for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.

Read more less

This is the faucet adapter by itself. Use this faucet adapter to connect a draft faucet directly to a keg using a flare quick disconnect, KEG720 for ball lock or KEG760 for pin lock. Faucet, knob and quick disconnect are not included. Will not work with our creamer faucets, the vent-matics, flow control Intertap or flow control Perlick faucets (compatible with standard Intertap/Perlick faucets). Unit does come with faucet collar for mounting adapter to faucet. The faucet adapter is made from stainless steel. The outside collor is chrome plated brass.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. 1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS S-style coupler for European kegs can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)

Read more less

Unbeatable value for a homebrew counter pressure bottle filler! Fill bottles directly from your keg with virtually no CO2 loss Purge oxygen from bottles before filling to preserve the quality of your beer Accessory set included for multiple connection options — no expensive add-on items needed! Duotight connections offer unparalleled customization and adaptability to your specific needs Compatible with forward-sealing faucets — NukaTap, Intertap, Perlick 600-series and others Running late but don't want to leave home without a couple of bottles of your latest creation? The Nukatap Counter Pressure Bottle Filler will have your precious cargo packed and ready at the drop of a hat! Slip it right into the nozzle of your Nukatap, Intertap, or other forward-sealing faucet to fill bottles right from the tap. Gas can be quickly connected using a bare end of 8 mm OD EVABarrier tubing, or connect the included Ball Lock Adapter to hook up gas using a Ball Lock Quick Disconnect. Not enough room under your draft tower? No problem! Like the gas-in port, you can swap out the push-in spout for the Duotight adapter, allowing you to connect tubing directly to the filler, or connect a Ball Lock Post Adapter and use a Ball Lock jumper line to fill right off your keg. While other fillers on the market force you to purchase upgrade accessories to improve functionality, the Nukatap Filler gives you more options to fill right from the get-go. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. Counterpressure filling is the absolute best option for packaging beer from your keg without affecting its quality. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, this is only way to go. The Nukatap Filler will make sure your brew doesn't pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing KegLand Part Number: KL21760  

Read more less

1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS coupler can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. What makes KOMOS Double-Wide Kegerator better than the rest? Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Faucets sold separately Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers. Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets. The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Feature Summary: Stainless Steel Air Cooled Double T Bar Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Stainless Steel Floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x 12m roll Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Detailed instructions on assembly and use Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 49.25" with tower 51.5" with Casters and Tower 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F - 80°F Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.  

Read more less

Quick Disconnects are a favorite among homebrewers for their ability to quickly move from one configuration to another. With the Brass Quick Disconnect Set you can easily connect and disconnect your water line to various equipment. These QD's must be placed in a configuration where water is always exiting the female portion of the QD and entering the male portion of the QD. For example the Female threads x Female QD portion is placed on the end of the hose while the Male QD portion is connected to your equipment. This set includes one Male GHT (Garden Hose Thread) x Male QD and one Female GHT x Female QD. We sell several adapter pieces that allow you convert GHT to male or female 1/2 inch pipe thread or 1/2 inch hose barb, making it a snap mount these QDs on just about any piece in your brewery. Please Note: This product will NOT work with our Stainless Steel or Plastic Quick Disconnects.

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. What makes KOMOS Double-Wide Kegerator better than the rest? Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model Faucets mount to high-quality stainless steel towers, rather than cheap chrome plated towers Interior fan diverts cold air up into the towers to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers. The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the two tap or eight tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Forward-sealing Stainless Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use. Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic, Black, and Flow Control faucet models. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Feature Summary: Stainless Steel Air Cooled Towers NukaTap Stainless Steel Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap towers includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2-tap tower and higher only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Detailed instructions on assembly and use Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 49.25" with tower 51.5" with Casters and Tower 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Megamouth Torpedo Keg - 3 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.2 Gal. Oxebar PET Keg - 6 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual. When choosing the number of taps you want, here is the tower configurations you'll receive. Taps Tower 1 Tower 2 2-Tap Single Single 3-Tap Single Double 4-Tap Double Double 5-Tap Double Triple 6-Tap Triple Triple 7-Tap Triple Quad 8-Tap Quad Quad   Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.  

Read more less

Hose clamp suitable for 3/8" to 7/8" OD tubing Go-to clamp for anywhere you need to secure tubing Made from stainless steel These Stainless Steel  hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case.  Stainless steel hose clamp will fit hoses with 3/8" through 7/8" OD.

Read more less

These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.). Comes in a convenient zip lock bag.

Read more less

You likely want to monitor the temperature of your wort as it moves from the chiller to the fermenter, and now you can do just that with this In-Line Thermometer. This high quality thermometer features stainless steel quick disconnects for easy installation in line with the rest of your brewing system, and many users install it on the “out” side of their convoluted heat exchangers and counterflow chillers. As the wort runs through the body of the in-line thermometer it runs across the 2-inch thermometer probe, giving an instant and incredibly accurate reading of its exact temperature. Ryan Barto, our Fulfillment Operations Manager and also the thermometer’s inventor, says that this handy device will help you to keep better control of your mash temperatures, and makes it easier to transfer your wort to your conical through the counterflow chiller. 

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi.  All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug. It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup is still incredibly durable, and does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade.  All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.

Read more less

Type F Camlock Fitting. Male Camlock with 1/2" Male BSP. Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04510

Read more less

This ball valve with male and Female Beer Thread (5/8" BSP) is incredibly handy for those wanting to shut off flow of liquid and gas lines on keg couplers or shanks. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. Made from 304 stainless steel. Kegland Part number: KL00406

Read more less