Replacement Base Gasket for Sight Gauge. Compatible with sight gauges MT510, MT520, MT530, and weldless sight gauges WL316, WL321, WL326.
Gasket only. Does not include base cap.
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for 14 Gal Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Factory direct replacement gasket for the top lid on Speidel's small sealed tanks. This gasket fits our tank SKUs beginning with "FD-", "BD-", and tanks BRAU710, 715 and 720.
Please note: The gasket you receive may be clear instead of red due to a recent design change by the manufacturer.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. This gasket is a direct replacement part for the ForgeFit 2" Full Port Ball Valve. For 3.5" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Keep your cherished Corny Kegs in perfect working order with this set of gaskets and o-rings. Having a spare set on hand is usually all you need to get your keg up and running on a moment's notice.
Kit includes two gaskets for the dip tubes, two for the body connects and one lid o-ring. Be sure to replace the gaskets on any used keg you acquire. A corny keg that has been used for soda in the past should have its gaskets replaced because the soda flavor can never be removed from the rubber.
This kit works for Ball Lock and most Pin Lock corny kegs.
This is the replacement gasket for the bottom of your Braumeister's Malt Pipe. This piece is easy enough to lose, and will eventually need to be replaced due to normal wear and tear.
Teflon gasket with 304 stainless mesh screen for 4" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream.
The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket.
KegLand Part Number: KL28394
This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.
Replacement front seat o-ring for the Perlick 630SS faucet. This is the gasket that the push back handle comes into contact with, stopping flow of the beer.
Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream.
The screen has a mesh size of 16 which will block particles larger than 1.19mm or 1190 microns. This mesh size makes this screen ideal for use in a filer setup with activated carbon.
Kegland Part Number: KL30496
Replacement Cap Gasket for Sight Gauge. Compatible with sight gauges MT510, MT520, MT530, and weldless sight gauges WL316, WL321, WL326.
Gasket only. Does not include end cap.
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor.
Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Features:
Custom lid w/ 304 Ss immersion chiller coil
Pro grade (super quiet) submersible pump
110-240V power supply
304 Ss weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
Replacement 3mm thick gasket for the 35L Distillation Lid. Note: The 3mm gasket works well with Gen 3 and older BrewZillas and Gen 1 DigiBoils. If you have a newer model, we recommend the 6mm Gasket for a better seal. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late December.
Submersible pump for cooling applications or similar.
A perfect match for FCS to supply cooling liquids to fermentation tanks up to 50 liters.
Very quiet.
Technical Information:
Voltage: 24VDC
Maximum Power: 17W
Maximum Flow: 11 L/min / 2.9 Gal/min
Maximum Height: 4.1m / 13.5 feet
Barb Size (liquid out): Ø=10.28 mm (recommended hose size: 8x12)
Ø=0.40" (recommended hose size: 5/16" ID)
Barb Size (liquid in): Ø=14.68 mm (recommended hose size: 10x14)
Ø=0.57" (recommended hose size: 3/8" ID)
IP rating: IP68
Cable: 3m / 9.8 ft.
Connector: LP12, 2-pin plug (male)
Removable bracket with 4 suction feet is included
Gasket/Seal for the back end of the fill spouts in our WE602 and WE610 3 and 5 Spout Siphon Fillers. This is the gasket which seals the fill spout against the inner wall of the filler's reservoir when a bottle is not on the spout.
These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for Brew Bucket and 7 gallon Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.
In the rare event that a small part of your equipment get lost or broken, the last thing you want to do is replace the entire thing! Thank goodness for replacement parts!
This is the replacement gasket that seals the lid onto the body of the plastic Speidel fermenters.
While these gaskets usually don’t wear out through normal use, it’s nice to be able to get a replacement if you need it!
This gasket fits our 20L (5.3 gal) & 30L (7.9 gal) Speidel Plastic Fermenters.
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone
For 4" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both EPDM and Silicone.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 4" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
KegLand Part Number: KL45209
Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
Replacement silicone feet for your Chronical Conical. A must have to keep your stainless steel fermenter level when the original feet get lost or damaged. Pack of 3.
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone
For 3" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both EPDM and Silicone.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 3" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
KegLand Part Number: KL45216
Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
Replacement internal gasket for Torpedo Keg ball lock QDs. This O-ring helps seal off the internals of the QD, resting where the hex head top screw fastens into the body of the QD.
16mm x 2.7mm
Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. This version of the FCS Kit includes the Density/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 density/temp sensor (TC 1.5") 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300L+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Remember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting a TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Setting Up the FCS for Your Tank Mounting To mount to your tank a ball clamp and a connecting rod are very useful. This will work with most any size or style tank. Solenoid Valve & Related Connection Hardware for Cooling For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For BrewBuilt, Spike, Ss BrewTech, or Commercial tanks you will need a TC 1.5" to 34mm adapter and 1.5" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I/O Module. Would You Like a Visible Air Lock on the Spunding Valve? The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, adding on an airlock for the pressure out solenoid valve is a nice option. For tanks under 300L, we recommend the 34mm polycarbonate airlock that connects to the Brewtools Solenoid Valve. For tanks larger than 300L, you should use a blowoff. For blowoffs, use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent ran into a bucket of water. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. For the MiniUni+ For MiniUni+, you need to replace the Mini Spunding Valve with an M24 to TC adapter and a 90-degree 34mm TC elbow to fit your spunding assembly (if you want to use the TC air lock. No need for elbow if you use tubing for a blowoff). You will need the clamps/gaskets to make the connection. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Density/Temp Sensor, TC 1.5", CAN BUS 24V Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m (2 pcs) Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713792
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 2" tri-clamp fittings.
KegLand Part Number: KL03438
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 3" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
The gaskets on the body connects that the ball or pin lock fittings slide over. 7/16" ID with a 3/32" cross section. Made of FDA BUNA-N rubber.
We also use this as a replacement for the smaller compression ring in our 1/2" Compression fittings so that you can create a snug fit in a Sanke keg conversion kit without permanently compressing a ring on the pick up tube.
Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place.
Includes:
(1) Stainless 1.5" Tri-Clamp 3-Piece Ball Valve
(1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter
(3) Stainless 1.5" Tri-Clamp
(3) EPDM 1.5" Tri-Clamp Gasket
(1) Stainess 1.5" End Cap
Includes every replacement seal for the NukaTap Flow Control faucet, ensuring you're prepared for any maintenance needs
This kit contains all the seals needed to upgrade a Gen 1 NukaTap Flow Control faucet to the Gen 2 mechanism, improving performance and longevity
Provides a full set of seals to quickly fix leaks, replace lost seals, or maintain taps used in demanding settings
This complete kit provides all the replacement seals you need for the Gen 2 NukaTap Flow Control faucet. If you have the Gen 1 Flow Control model, you can use the improved flow control mechanism in this kit to effectively upgrade your faucet to the Gen 2 Flow Control model.
Most of the seals in this kit are durable and won't require frequent replacement. However, if you experience a leak, accidentally lose a seal, or use the tap in a demanding commercial environment, this kit has you covered.
When replacing seals, we recommend applying a food-grade lubricant to ensure a long-lasting and secure fit. As you take the tap apart, it can also be helpful to take a picture or make a note of where each seal is located to make reassembly easier.
Includes:
The Nuke!
Bonnet Washer
2 x Black POK Cup Seal Washers
Nozzle Washer
Flow Control Arm Seals
Flow Control Arm Thread Seals
Gen 2 Flow Control Mechanism
KegLand Part Number: KL44950
Newest faucet design on the market!
Reduced first pour foam due to low thermal mass
Forward-sealing design prevents beer residue from gumming up the faucet
Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages
Compatible with all Intertap faucet accessories and shanks
First Pour Foam Reduction
Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets.
Improved Laminar Flow
The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream.
Sanitary Design
The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market.
Forward Sealing vs. Rear Sealing
From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour.
Made from stainless steel
Shuttle made from TPV
O-rings made from EPDM
NSF approved
Kegland Part Number: KL15509
