EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 2" tri-clamp fittings
Made from Silicone
Temperature rated from -30°F to 300°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone
For 1.5" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both EPDM and Silicone.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 1.5" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
KegLand Part Number: KL45230
Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
Silicone gaskets have a wide temperature range and are recommended for hot side applications
For 3" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both Silicone and EPDM.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 3" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
KegLand Part Number: KL44813
Special tri-clamp gasket made for the X3 conical series. Compatible with all sizes of X3 via 8" tri-clamp connection.
Not compatible with X2 or X1 Uni Conicals.
EPDM gasket for 1.5" tri-clamp connection. Temperature rated from -30°F to 300°F. Use color-coded gaskets for different applications to avoid cross contamination. Available in Black, Red, and Blue. Red is commonly used to mark Brettanomyces rubber in breweries that separate brett from brewing yeasts.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
Made by Forgefit from a dedicated mold so the dimensions never change. If you buy generic tri-clamp gaskets the dimensions can be different which is why we only sell these gaskets now.
For 1.5" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
Silicone gaskets have a wide temperature range and are recommended for hot side applications
For 4" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both Silicone and EPDM.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 4" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
KegLand Part Number: KL44806
Replacement 6mm thick gasket for the 65L Distillation Lid. Note: This 6mm gasket offers an improved fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL32667
This 2" replacement gasket is intended for use with the KegLand Ball Lock Adapter Tapping Head for Sanke Kegs (KEG870). It only has the bead on one side of the gasket and the other side is flat. This gasket can also be used to directly clamp on an AlcoEngine Still Top to a compatible lid with 2" tri-clamp ferrule. It is not intended to be used as a replacement gasket for standard tri-clamp fittings. KegLand Part Number: KL99895
Replacement 6mm thick gasket for the 35L Distillation Lid. Note: This 6mm gasket offers an improved fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490
Replacement pre-drilled FTSs lid. Included with the the Ss BrewTech FTSs chilling system for the 1/2 bbl Chronical.
Lid only. This does not include the other FTSs components.
Give your Chronical insulation to help with maintaining fermentation temp and assist with cold crashing. Specifically sized for the 10-clamp version of the 1/2 bbl unit.
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for Half BBL Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical Half BBL fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 1.5" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Teflon gasket with 304 stainless mesh screen for 1.5" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. This screen can also be used with the 1.5" Hop Bong as an inline filter. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28516
Single replacemelt ball seal (cup seal) for NukaTap draft faucets. Component #3 in the faucet diagram below. Each NukaTap has two of these washers.
Also compatible with Intertap brand faucets. Not compatible with the NukaTap Mini faucet.
How to tell what generation NukaTap you have.
Generation 1 - Two White Nylon Cup Seal Washers
Generation 2 - Two Red Self Lubricating Nylon Cup Seal Washers
Generation 3 - Two Black POK Cup Seal Washers
KegLand Part Number: KL43908
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone
For 8" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both EPDM and Silicone.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 8" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
KegLand Part Number: KL45193
Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
Replacement cup gasket is for the ForgeFit® Sanitary Sample Valve.
This is the recommended replacement part for the sample valve on MB conical fermenters and brite tanks.
Material: EPDM
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
Silicone gaskets have a wide temperature range and are recommended for hot side applications
For 2" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both Silicone and EPDM.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 2" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
KegLand Part Number: KL44820
These 5/8" EPDM gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
Factory direct replacement gasket for the top lid on Speidel's small sealed tanks. This gasket fits our tank SKUs beginning with "FD-", "BD-", and tanks BRAU710, 715 and 720.
Please note: The gasket you receive may be clear instead of red due to a recent design change by the manufacturer.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 8" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
