Please note: This kit is intended for use with Gen 1 35L DigiBoils (BE501 / BE502). It has a slightly larger wire support ring that may not fit Gen 2 DigiBoils (BE515 / BE516). See related product for the Gen 2 DigiMash Upgrade Kit. Ready to upgrade your DigiBoil into a DigiMash? With the DigiMash upgrade kit you can convert the DigiBoil into a full blown electric all-in-one system. Includes false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen Installation & Use: Place the false bottom inside the kettle Install the wire support in the channel located at the top of the kettle Place the mesh screen inside the malt pipe and attach the handle Lower the malt pipe into the kettle so it rests on the wire support Fill with strike water and heat to desired strike temperature When desired temperature is reached, add grain and stir until well mixed When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F) When you're done collecting your wort, remove the malt pipe and proceed to boil Please note: only the 500-watt element should be used to increase mash temperatures when the Malt Pipe is in place. Using the higher watt element(s) with the Malt Pipe inserted may cause scorching of the grain. Kegland Part Number: KL12980
Smaller home brews should still produce results that are just as tasty as larger batches, which is why this 5 Gallon Stainless Steel Kettle is an excellent addition to your home brew setup. This small 5 gallon brewing kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it’s available for a very affordable price.
Although this brew kettle is quite economical, it’s also made of high quality 202 stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry even when filled. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!
Features:
0.5mm thick stainless sides and bottom
10" H x 12.5" D
Riveted Handles on Kettle Body
Kettle Lid with riveted handle
5 gallon full capacity (3 gallons while boiling)
Perfect size for Extract Brewing!
The 10 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. This US made single piece construction pot carries a lifetime limited warranty. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own.
All the items you need come standard, installed, and ready to use on the G2 10 gallon brew pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this 10 gallon pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
This is an extension that fits onto the Blichmann 55 Gallon BoilerMaker kettles. It has the G2 finish, matching their newest line of kettles. Using this extension, the 55 gallon BoilerMaker nearly doubles its volume to top out at slightly over 100 gallons! Comes with a gasket for a watertight seal between the BoilerMaker Kettle and its Extension. The extension comes with a sight gauge marked up to 100 gallons, and the original lid for your BoilerMaker will fit right on top.
This is designed for 2 BBL batches, and is a great option for someone who wants to expand capacity without starting over with a new Brew Stand and set of kettles!
We've found that using a StarSan solution around the gasket / 55 gallon kettle top helps to get the extension into the kettle.
NOTE - Does not come with 55 Gallon Kettle in picture. This is just for the extension (top half). You will also need the Extension Removal tool to use this unit.
Butterfly Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes butterly valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place.
Includes:
(1) Stainless 1.5" Tri-Clamp Butterfly Valve
(1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter
(3) Stainless 1.5" Tri-Clamp
(3) EPDM 1.5" Tri-Clamp Gasket
(1) Stainless 1.5" End Cap
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included.
Remember to order clamp and gasket for the top port.
For User Manuals and support, please follow this link to Brewtools Docs.
Our Premium BIAB (Brew In A Bag) kettle and bag kit is the most affordable way to get into all-grain brewing. This hardware kit includes a stainless steel kettle, ball valve, hose barb connection, 1/2" plug and plumbers tape to seal the connections. While it does not include directions (you can easily Google BIAB), the basic concept is that you place the bag in the kettle, add the grain from your recipe along with a measured amount of hot water and let it steep for 60 minutes. You then remove the bag and boil with hops in the same vessel. Very easy.
Available with either an 8.5 or 14 gallon kettle.
Brew in a bag kit includes:
Stainless steel brew kettle with 1/2" FPT fittings
1/2" stainless steel ball valve, with stainless hex nipple and 1/2" stainless steel barb
Stainless steel plug for thermometer port
29" X 29" nylon mesh bag with drawstring
Roll of plumbers tape
The Brewtools Steam Condenser fits the Brewtools Steam Hat and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system.
The unit ships with a nozzle that supplies 1.1 liters of water per minute at 4 bar pressure. We also offer other nozzles that offers higher or lower flow depending on the water pressure where the system is used and other factors (sold separately).
Included:
TC 4" to TC 2" adapter (1 pcs)
20cm straight TC 2" pipe (2 pcs)
TC 2" Tee (1 pcs)
TC 2" Elbow (1 pcs)
TC 2" 1/8" nozzle adapter with TC34mm input (1 pcs)
TC 2" to 19mm hose barb adapter (1 pcs)
TC 2" Clamp (6 pcs)
TC 2" Gasket (6 pcs)
1/8" BSP-T nozzle, 30 degrees, 1.1 liters per minute @ 4 bar (1 pcs)
You Will Also Need:
Steam hat for your system
TC 4" Clamp and gasket
Water inlet adapter (TC34mm to hose or garden connector etc)
Outlet tube (16x25mm)
A TC34mm elbow is recommended for the water inlet
Please take not that you need much less power to keep the boil going with this device, and the risk of the wort boiling over is high when too much power is used, so make sure to take the necessary precautions. To sustain the vacuum, the drain tube from the condenser must not have any counterpressure. We recommend draining to a bucket where the tube is not submerged in the water, or suspend the tube directly over a floor drain.
For User Manuals and support, please follow this link to Brewtools Docs.
Welded 1.5" tri-clamp ports for a lifetime of leak-free use
Front & back positioned handles reduce the space needed to arrange multiple kettles in a horizontal system
304 stainless steel construction with mirror polish finish
Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories
Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations
The Boil Kettle comes without fittings
The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe
The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe
Add your preferred Valve Hardware Pack below under You Might Also Need or purchase your own valve & fittings separately
Designed for Brewing. Built to Last.
BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.
Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.
Configurations
The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place.
The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer.
The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer.
Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately.
This Brew Kettle has a lot to offer...
Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.
Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.
Mirror Polish Finish
The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.
Size Ratios and Stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.
Features:
Two welded T.C. couplers for a lifetime of leak free use
Front & back oriented handles with silicone coated handles for heat protection
Notched lid with silicone plug for flexibility
304 stainless steel construction for longevity
1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting
4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching
Internally etched volume markers from top to bottom for easy reading
1.2:1 Ratio is optimal for boiling evaporation rate
Lid is designed to conveniently hang from a handle
Stainless handles with stainless rivets for secure lifting
Size
Kettle ID (in.)
Height (in.)
10 Gallon
13.78
16.54
15 Gallon
15.75
18.90
20 Gallon
17.72
21.26
30 Gallon
19.69
23.62
50 Gallon
23.62
28.30
All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 10 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 14 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adaptor to 3/8" barb for easily attaching transfer tubing. Also included is a threaded 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 14 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters 1.2 mm thick walls Made from 201 Stainless Steel Approximate Dimensions 17.5" tall 16" wide, 1.2mm thick This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
Welded 1.5" tri-clamp ports for a lifetime of leak-free use
304 stainless steel construction with mirror polish finish
Front and back located handles with silicone grips
Induction burner compatible
Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories
The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third tri-clamp port is offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from.
Designed for Brewing. Built to Last.
BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are three welded-in place tri-clamp couplers that offer a lifetime of leak free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.
Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.
This kettle comes without fittings so you can modify it with whatever tri-clamp accessories best suit your needs.
This Brew Kettle has a lot to offer...
Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner. The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.
Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.
Mirror Polish Finish
The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.
Size Ratios and Stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.
Final Words
With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA!
Features:
Three welded T.C. couplers for a lifetime of leak free use
Notched lid with silicone plug for flexibility
304 Stainless construction for longevity
1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting
4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching
Internally etched volume markers from top to bottom for easy reading
Silicone coated handles for heat protection
1.2:1 Ratio is optimal for boiling evaporation rate
Lid is designed to conveniently hang from a handle
Stainless handles with stainless rivets for secure lifting
SKU
Size
Kettle ID (in.)
Height (in.)
BE581
10
13.78
16.54
BE582
15
15.75
18.90
BE583
20
17.72
21.26
BE584
30
19.69
23.62
BE585
50
23.62
28.30
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 15 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 18.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø Made from 201 Stainless Steel Approximate Internal Dimensions 18" tall 17.75" wide. 1.2 mm thick walls This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately
The Ss Brewtech Whirlpool fitting attaches to the thermometer port, the recirculation port, or another 7/8" hole. Creates a nice whirlpool action that works perfectly with a trub dam to keep out most of the hop matter and other solids from your fermenter. Made from 304 stainless steel. The whirlpool fitting has a 1/2" MPT and comes with 1" x 1/2" bulkhead. Please note this product is intended to be used with a 1/2" FPT ball valve (BE382) on the outside of the kettle. Please see the Whirlpool Fitting Quick Reference Guide below for installation and operation instructions.
Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm! Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns.
Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!! See the Documents tab above for a more detailed guide to use.
For USE ONLY ON Ss MASH TUNS (10/20 gal)
304 Stainless Steel construction
Designed for gravity feed from HLT
Or hook your own pump / flow control valve
3/8” diameter stainless tubing
3/8" barb on inlet of tubing
Custom silicone handle mount for Ss Mash Tun
Easily adjust height of sparge head up / down
Uniform liquid dispersion fom sparge head
Ready to upgrade your DigiBoil into a DigiMash? With the DigiMash upgrade kit you can convert the DigiBoil into a full blown electric all-in-one system. Includes false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperture on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil.
Includes:
False bottom
Malt pipe
Wire support
Malt pipe handle
Malt pipe bottom screen
Installation & Use:
Place the false bottom inside the kettle
Install the wire support in the channel located at the top of the kettle
Place the mesh screen inside the malt pipe and attach the handle
Lower the malt pipe into the kettle so it rests on the wire support
Fill with strike water and heat to desired strike temperature
When desired temperature is reached, add grain and stir until well mixed
When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support
Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F)
When you're done collecting your wort, remove the malt pipe and proceed to boil
Please note: only the 500-watt element should be used to increase mash temperatures when the Malt Pipe is in place. Using the higher watt element(s) with the Malt Pipe inserted may cause scorching of the grain.
Kegland Part Number: KL13055
The 7.5 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. This US made single piece construction pot carries a lifetime limited warranty. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free. Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
The 55 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning. From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness. The BoilerMaker™ G2 is clearly in a class of its own. Imported pot, assembled in USA with additional USA components. Lifetime limited warranty.
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
Please Note: 30 & 55 gallon G2 Boilermakers will come equipped with G1 Lids (see image for details)
If you’re looking for a truly state-of-the-art brew pot for your mid-size beer batches, the BoilerMaker™ G2 15 Gallon Brew Pot from Blichmann Engineering is the perfect choice. This small yet high tech brewing kettle is built with a single piece of heavy gauge, weld-free stainless steel that is designed to last for years to come, and its improved surface means it is much easier to cleanup once you’re done brewing for the day.
The BoilerMaker™ G2 15 Gallon Brew Pot is packed with more incredible features than you can even imagine, including cool touch custom molded grips, a durable, easy-to-read sight gauge, snap-in drain tube, and the informative BrewMometer™ thermometer. Other optional Blichmann accessories include the Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, as well as an included parabolic valve that provides linear flow for unparalleled flow control throughout the brewing process.
Also available in the following sizes:
· BoilerMaker™ G2 7.5 Gallon
· BoilerMaker™ G2 10 Gallon
· BoilerMaker™ G2 20 Gallon
· BoilerMaker™ G2 30 Gallon
· BoilerMaker™ G2 55 Gallon
All the items you need come standard, installed, and ready to use on the G2 Brew Pot:
Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom*
Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator! All of our pots perform consistently and flawlessly with homebrewers in mind
Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy.
Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience
Improved surface finish hides finger-prints and cleans impeccably. Sleek brush on the outside and a silky smooth satin finish on the inside.
Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports. Much easier and more accurate than internal graduations. It will also act as a mash manometer and warn you of impending stuck mashes!
Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom!
Handle orientation that makes carrying easier and lid storage on the pot handle.
Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch.
Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting.
A great way to start with high-quality equipment equipped with all the options.
This is a replacement seal kit for all Blichmann BoilerMaker Brew Kettles. We recommend purchasing a seal kit when you purchase a BoilerMaker as they're relatively inexpensive, and are great to have on hand if you have a leak on brew day!
We've seen a lot of all-in-one systems over the years, but none are as feature-packed and affordable as the BrewZilla. While other units simply maintain your set temperature, the BrewZilla features a sophisticated digital controller which can be programmed with a full mash schedule, executing each step automatically. The built-in pump will continuously recirculate wort during the mash for more even heat distribution and higher efficiency, but thanks to the integrated camlock fitting, it has even more functionality. Add the optional whirlpool arm to make your late hop additions pop and speed up chilling time, or connect a camlock fitting and tubing to transfer wort to your fermenter. These are just a couple of reasons why MoreBeer! loves the BrewZilla, but there are so many More!
Our Top 10 Favorite Features:
Sophisticated digital controller capable of programmed mash steps, boil addition timers and delayed start
Built-in pump for constant recirculation during mash or whirlpooling and transferring with optional accessories
Full depth malt pipe for higher mash efficiency and capable of running small batches without a pricey adapter
Multiple power modes to cover each step of the brew day – low power to gently heat your mash up to full power for a rolling boil
Wort chiller included! Perfectly sized for this system and adds even more value to your purchase of the BrewZilla
High capacity brewhouse – with a volume of over 9 gallons, you can fit more grain and more wort to make MoreBeer!
Single wall design doesn't trap in heat – chill your wort quickly after the boil!
Super convenient bottom handle makes lifting/pouring a breeze
Rubber feet keep the boiler lifted off the ground and safely above any spills that may occur
Affordable! This is the best price for an all-in-one brewing system you'll find, period.
If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the BrewZilla is a complete turn key solution. The BrewZilla is an all-in-one electric brewery that has built-in elements for heating and boiling, programmable mash schedule and delayed start, a built-in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built-in spigot for transferring. It is extremely portable and uses 110V power so it can be used nearly anywhere.
The V3.1.1 unit features an upgraded main circuit board that changes how the automatic step mashing functions. Now when moving from step to step, the timer for each step will not begin counting down until the programmed temperature is reached. This means more accurate mash schedules than ever before! The new board also introduces boil addition timers so you'll never miss the mark for hop additions.
To get the Wort Chiller Connection Kit for free, add the item to your cart along with the BrewZilla and use code ZILLAKIT at checkout.
New accessory! Check out the BrewZilla Whirlpool Arm, which uses the unit's internal pump to recirculate and spin the wort, improving hop extraction and chill times. No more stirring!
Automatic Step Mashing & Delayed Start!
One of the coolest features of the BrewZilla is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire. Simply press the "S1-S6" button to select the stage you want to adjust, and use the temp, time and +/- buttons to program the stage. If you have less than 6 stages in your mash schedule, program the stages you want to skip with 00:00 as the time and the controller will automatically move on to the next step. When all the stages are complete, the unit will sound an alarm and hold the last set temperature.
The programmable stages can also be used to set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or wake up in the morning. In order to do this, fill the unit with strike water and program the controller with two steps. Step 1 should be programmed at a temperature lower than the unheated strike water (so the elements will remain off), and the duration should be programmed for however long you want the delay. Then program Step 2 with your desired strike water temperature and a duration of 1-2 hours, giving the BrewZilla ample time to heat up and giving you a margin of error in case you hit the snooze button the morning of brew day.
Recirculating Mash with Full Depth Malt Pipe
The built-in magnetic drive pump easily recirculates wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the pump to transfer your wort to your fermenter. As with any mash, be sure to stir your grain very thoroughly after mashing-in so you start out with an even temperature throughout the grain bed.
Some competing models advertise their perforated malt pipes as "high flow", but what they don't mention is how this affects efficiency. When recirculating the mash, wort will escape through the side perforations rather than passing through the grain at the bottom-most end of the malt pipe which can lead to lower efficiency. The BrewZilla's malt pipe is designed so that recirculating wort must pass through the entire grain bed before escaping through the false bottom and being pumped over the top of the grain bed again. If you're worried about the flow rate, simply add a pound or two of rice hulls to your grain bill. This is especially recommended when brewing with a high level of wheat, oat, or flaked grains.
Power & Heating Control
Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.
We highly recommend adding the optional BrewZilla Neoprene Jacket to help reduce heating times and maintain a more vigorous boil. The extra thick neoprene jacket is custom designed to insulate the entire kettle portion of the BrewZilla while staying out of the way of the ball valve and handles. The jacket can help you acheive up to 10% faster heat up times and cut heat loss from the boiler in half. And when it comes time to cool your wort after the boil, simply remove the jacket! While other units boast a double wall design for better heat retention, this actually becomes a disadvantage when it comes to chilling.
The digital control panel makes it easy to see the current temperature and set the temperature you want. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!
The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it out and tabs at the base so you can set the malt pipe over the kettle to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.
The included stainless steel wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.
What MoreBeer! loves about this product: Homebrewing is trending in the direction of all-in-one, all-grain brewing systems and the BrewZilla is the ultimate value. The cost is half of the next comparable system with programmable mash steps and nearly the same as buying converted coolers and a kettle. We've brewed on all the systems and we can truly say the BrewZilla is the easiest to use. We feel confident that a lot of first time brewers could buy this and use it with ease. At the same time quite a few of our experienced, all-grain brewing staff are buying it to brew at home. The unit is extremely compact because the pump is built-in to the bottom of the unit. You can move it around with ease which makes it perfect for guys and gals that have space constraints. Someone on the team also mentioned how they like that you can drain it via gravity without having to use the pump. All in all a great buy and highly recommended. Please note you will need a few extra pieces of hardware to connect the wort chiller and at least 2' of silicone tubing for the sparge.
Use the Pump for More Than Just Recirculation!
One of the surprisingly handy features of the BrewZilla is that the recirculation pipe features a female camlock. This allows you to hook up other accessories and use the unit's pump for more than just recirculating wort. With a male camlock and silicone tubing, for example, you can use the internal pump to push wort through a plate chiller or counterflow chiller. Check out our selection of camlock fittings here.
Features:
Gen 3.1.1
Stainless steel construction
9 gallon total capacity with a finished beer output of 5-6 gallons
Digital temperature controller
Automatic step mashing with 6 programmable stages
110V power and plug
Dual heating elements for total control (1000 watts and 500 watts)
Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
Immersion wort chiller included
Stainless steel malt pipe/basket
Stamped in volume markers
Glass lid
Magnetic drive pump for recirculation
Recirculation arm
Bottom handle for easy lifting and pouring
Upgraded rocker switches
Rubber feet
Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
32.75 in H (with recirculation arm) x 12.5 in D
Recommended max. grain bill - 18 lbs
Recommended min. grain bill - 8 lbs
AlcoEngine Still ready with the purchase of a Distillation Lid
You Will Need:
2' of H985 1/2" ID Silicone tubing for sparging and draining.
To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950hose clamps and (1) brass hose by thread adaptor (H508).
These items come in the Wort Chiller Connection Kit, add the kit to your cart and use code ZILLAKIT at checkout.
Note: The manual references an element for a different market. This unit comes with two heating elements for a total of 1,500 watts.
Kegland Part Number: KL05838
For all-in-one brewers and BIAB brewers, lifting the grains from your vessel can be daunting task. Give your back a rest and use the Lift-N-Lock pulley system to effortlessly lift up your grain bag or malt pipe and while your sweet wort drains into the kettle. This heavy-duty pulley is made from strong nylon strapping, laser cut 304 grade stainless steel and is capable of lifting large heavy loads with ease. It's the perfect pulley for lifting the heavy malt pipe from your BrewZilla or other all-in-one system, especially when brewing high gravity beers with a massive grain bill. It's a bit more expensive than other pulley systems, but there's no comparison when it comes to easily lifting or lowering the malt pipe. The included strap is 10m long by 25mm wide (32.8 ft. x 1 in.).
The pulley system enables you to multiply your pulling force by 4 times. If you apply 60 lbs of pulling force, the pulley can lift 240 lbs with relative ease. Be sure that the beam you mount the pulley to is rated for the total amount of force being applied i.e. pulling force plus load weight, so for this example 300+ lbs.
KegLand Item Number: KL30885
The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Triple heating elements combine for 3500W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 17-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing at the 10-gallon batch level. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 65L DigiBoil, which has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 17 gallon total capacity Digital temperature control 220V / 20A power NEMA 6-30R plug (4.5 ft. cord) Triple heating element control (2000w, 1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both the +/- buttons to switch between °F or °C External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed DigiMash Upgrade Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen NOTE: Due to the size of this item, it is not eligible for international shipping.
Anvil Brewing Equipment dip tube, complete with nut and o-ring. The perfect companion for your Anvil Brewing Equipment kettle ball valve! This ½” diameter dip tube installs quickly without tools to any 1/2” male NPT fitting and can be oriented at any angle. Compatible with the Anvil Brewing Equipment kettle strainer (coming soon!)
The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Dual heating elements combine for 1500W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Stainless lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed DigiMash Stainless Steel Accessory Pack Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen
Complete electric brewhouse with electric boil kettle & hot liquor tank and insulated mash tun Boil kettle features a tangential whirlpool port, myrcene ring to keep flue condensation from entering the boil, glass manway door, and insulated walls for heating efficiency Oversized HLT large enough for mashing and sparging without needing to top off. Features sight gauge and tapered bottom with center drain Insulated mash tun features a slotted 3-piece false bottom, adjustable height sparge arm, and large grain out manway door with removable chute All tanks ship domestically from within the contiguous United States The MB Pro Brewhouse features an Electric Boil Kettle, Electric Hot Liquor Tank, and Insulated Mash Tun—all perfectly sized for 3.5 bbl batches. MB Pro Brewing Systems are very well constructed and represent an amazing overall value. They also boast a very impressive feature set. Great Quality from MB Our brewing systems are made at a family owned manufacturer in the Ningbo region of China. Ningbo is where most premium beer tanks and brewing vessels come from and represents a known style and level of quality when compared to other areas of China. Our professional brewhouse equipment is designed by our in-house R&D designer Colin Kaminski, a former brewmaster for 15 years. Cleanability, ease of use, and durability are our primary design criteria. Our manufacturing partner in China is a father/son team that takes great pride in what they do. Some discount dealers buy from different manufacturers who offer one-off deals. That can be fine one time but not the next. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Please Note: the electric boil kettle and hot liquor tank are supplied without controls for the electric elements. You will need to supply your own control panel. Electric Boil Kettle Our Pro Electric Boil Kettle features three 9,000W heating elements, dedicated tangential whirlpool port, condensation ring, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. Boil Kettle Features:
Insulated walls for safety and energy efficiency Condensation ring to keep flue condensation from entering the boil (Myrcene Ring) Tangential port for whirlpool Side drain with hop dam for easy whirlpooling and good trub separation Dished bottom with 2" center drain for easy trub clean up Fill Port for adding dilution water Float Switch to protect the electric elements from running dry (wiring required)
Powered by (3) 9,000-watt 3-phase 208V elements Total Amperage Draw: 75 amps at 3ph 208V The kettle must be grounded
PT10 Temp Sender Analog Temp Gauge for quick reading CIP Ball Glass Manway Door Internal LED Light Boil Kettle Specifications: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 54" Tank Diameter: 41" Empty Weight: 360 lbs Working Volume: 3.5 bbl Max Volume: 5.1 bbl All ports are 1.5" TC except for DN350 Manway, DN219 Vent Port, DN80 LED Light Port, 2" TC Drain Outlet, 2" TC Element Ports Electric Hot Liquor Tank Our Pro Electric Hot Liquor Tank features three 9,000W heating elements, insulated walls for energy efficiency, condensation ring, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. A float switch is pre-installed just above the heating elements, which is intended to protect your elements from running dry. The device comes unwired and needs to be included in a circuit in order to function. HLT Features:
Oversized to allow mashing and sparging without having to top off Insulated walls for safety and energy efficiency Condensation Trap so no flue is used Sight Gauge to check volume Fill Port Tapered Bottom w/ Center Drain Float Switch to protect the electric elements from running dry (wiring required)
Powered by (3) 9,000-watt 3-phase 208V elements Total Amperage Draw: 75 amps at 3ph 208V The kettle must be grounded
PT10 Temp Sender Analog Temp Gauge for quick reading Internal LED Light HLT Specifications: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 61" Tank Diameter: 47" Empty Weight: 375 lb Working Volume: 4.5 bbl Max Volume: 5.1 bbl All ports are 1.5" TC except for DN350 Manway, DN19 Condensation Pipe, 4" TC CIP Port, 2" TC Element Ports, 4" Welded Vent Insulated Mash Tun Our Pro Insulated Mash Tun features slotted 3-piece false bottom, adjustable-height sparge arm, 4" TC port for optional grist hydrator, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. The mash tun has a slotted plate screen with a large grain out port on the side. The optional hydrator allows you to mix grain with hot liquor if you have your mill or grist case above the mash tun. There is a large top access for manual stirring. The walls of the mash tun are insulated to provide stable mashing temperatures. While intended for a single infusion mash, step mashing can be performed by recirculating through a heat exchanger. The sparge arm is adjustable in height and it is intended to have an inch of water above the grain and have the bottom of the diverted plate resting on top of the grain for low oxygen pickup during recirculating and sparging. We recommend that you use a grant to avoid creating suction on the bottom of the mash screen. It is possible to pull 23,000 lbs of force on the screen with a pump and a fully stuck mash and even partial vacuums can produce significant force. Alternatively, you can install a vacuum breaker ahead of the pump. Replacement screens are available for special order. Mash Tun Features:
Insulated for low heat loss Slotted 3 pieces false bottom Large side grain out door Removable grain out chute 4" TC grain inlet port for optional grist hydrator Adjustable Height Sparge Arm for better HSA performance Sparge Arm has two inlets, HLT and Recirculation. Large top lid for easy stirring PT10 Probe Analog Temp Gauge 250+ lbs Grain Capacity Internal LED Light Mash Tun Specifications: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 56" Height w/ Hydrator: 72" Tank Diameter: 41" Empty Weight: 360 lbs Working Volume: 3.5 bbl Max Volume: 4.6 bbl Manway: 20.8" x 16.9" All ports are 1.5" TC except for 4" TC Sparge Arm Port, 4" TC Grist Hydrator Port, DN80 LED Light Port Please note: the primary image shows the mash tun with optional grist hydrator (sold separately). Power requirements listed represent actual amperage draw. Please consult a licensed electrician to determine what amperage breaker is required based on your local codes. Please Note: This item requires a professional electrician for installation. Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Stop stirring your wort with a spoon and allow the BrewZilla's internal pump to do the work with this new Whirlpool Arm accessory. Fits all sizes of BrewZilla. The whirlpool arm fits onto the existing recirculation pipe with a stainless steel male camlock fitting. The BrewZilla's internal magnetic pump will aid in circulating your wort for better hop extraction in the whirlpool stage, as well as help collect the hot break into the center of the false bottom. Whirlpooling while cooling with the immersion heat exchanger will also speed up chilling times.
Specifications:
304 Stainless Steel
Fitted Male Camlock fitting
Soft Safety Grip
Length 520mm (20.5")
Kegland Part Number: KL14199
Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.
All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 20 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 25 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 25 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Approximate Internal Dimensions: 23.5" Tall x 17.75" Ø 1.2 mm thick walls Kettle constructed from 201 stainless steel This item does not work with induction burners. A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately
Reduce heating time during your mash with the Gen 4 BrewZilla
Redistribute recirculating wort for longer heating element exposure
Improve heat distribution throughout the mash
Speed up heating times with the Heat Exchanger Dish (HED) for Gen 4 BrewZillas. This optional upgrade accessory redirects the flow of wort so that it spends more time exposed to the heating elements before reaching the center drain at the bottom of the kettle and being recirculated. Due to the concave bottom and central draining hole on the Gen 4 BrewZilla, recirculating wort will pass through the malt pipe and then down through the boiler false bottom following the path of least resistance. This can cause wort to make a B-line for the drainage hole and reduce the wort's exposure to the unit's heating elements. With the HED installed, wort will be directed to the edge of the BrewZilla base and pass over the elements for a longer period and reduce the time needed to heat to your set temperature.
For use with the Gen 4 35L BrewZilla. It is not compatible with any previous generations of BrewZillas or DigiBoils.
The HED has been pressed into a slight concave shape to match the curvature of the boiler false bottom. Includes a longer eye bolt assembly than the one included with the false bottom.
NOTE: The order of bolt to washer to nuts goes as follows. Eye bolt, washer, false bottom, washer, nut, HED, then wing nut. This is so that the eye bolt does not come completely removed when and if you clean underneath the Heat Exchanger Dish.
KegLand Part Number: KL29353
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. MB Pro Brewing Systems are very well constructed and represent an amazing overall value. They also boast a very impressive feature set. Our Pro Insulated Mash Tun features slotted 3-piece false bottom, adjustable-height sparge arm, 4" TC port for optional grist hydrator, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. The mash tun has a slotted plate screen with a large grain out port on the side. The optional hydrator allows you to mix grain with hot liquor if you have your mill or grist case above the mash tun. There is a large top access for manual stirring. The walls of the mash tun are insulated to provide stable mashing temperatures. While intended for a single infusion mash, step mashing can be performed by recirculating through a heat exchanger. The sparge arm is adjustable in height and it is intended to have an inch of water above the grain and have the bottom of the diverted plate resting on top of the grain for low oxygen pickup during recirculating and sparging. We recommend that you use a grant to avoid creating suction on the bottom of the mash screen. It is possible to pull 23,000 lbs of force on the screen with a pump and a fully stuck mash and even partial vacuums can produce significant force. Alternatively, you can install a vacuum breaker ahead of the pump. Replacement screens are available for special order. We strongly recommend using a Wort Grant when pumping off the mash tun to avoid the possibility of collapsing the screens. Great Quality from MB Our brewing systems are made at a family owned manufacturer in the Ningbo region of China. Ningbo is where most premium beer tanks and brewing vessels come from and represents a known style and level of quality when compared to other areas of China. Our professional brewhouse equipment is designed by our in-house R&D designer Colin Kaminski, a former brewmaster for 15 years. Cleanability, ease of use, and durability are our primary design criteria. Our manufacturing partner in China is a father/son team that takes great pride in what they do. Some discount dealers buy from different manufacturers who offer one-off deals. That can be fine one time but not the next. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. All Features: Insulated for low heat loss Slotted 3 pieces false bottom Large side grain out door Removable grain out chute 4" TC grain inlet port for optional grist hydrator Adjustable Height Sparge Arm for better HSA performance Sparge Arm has two inlets, HLT and Recirculation. Large top lid for easy stirring PT10 Probe Analog Temp Gauge Internal LED Light Specifications for 3.5 bbl Mash Tun: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 56" Height w/ Hydrator: 72" Tank Diameter: 41" Empty Weight: 360 lbs Working Volume: 3.5 bbl Max Volume: 4.6 bbl Manway: 20.8" x 16.9" All ports are 1.5" TC except for 4" TC Sparge Arm Port, 4" TC Grist Hydrator Port, DN80 LED Light Port Please note: the primary image shows the mash tun with optional grist hydrator (sold separately). Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
