Search results for "ss brewtech gasket"

The adjustable dip tube allows you to adjust the angle of the dip tube from outside the tank. Useful for adjusting the pump inlet dip tube and also for adjusting the whirlpool return dip tube, to optimize and experiment with different angles during use. Fitted between the valve and the outlet ports on the right and/or left side on the brewing systems. The dip tube should be pulled out of the housing slowly to avoid o-ring damage.

Read more less

Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen when used in combination with the 2" Hop Bong, 2" Butterfly Valve and additional accessories. Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience. Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity. Durable and Pressure-Resistant: Includes 4" and 2" Tri-Clamp ferrules, suitable for use up to 21 psi, with recommended PRV options for safe operation at specified pressures. Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule. See the Kegmenter Hop Bong Pressure Pack for a complete kit option. Upgrade your Kegmenter Fermentation Keg with this 4" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed to address the growing desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. The lid features closed ports that can be drilled out to install optional accessories like the Temp Twister Cooling Coil and a Thermowell. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel. Due to the large 4" Tri-Clamp diameter, it is difficult to get higher pressures without leaking, therefore we suggest using the lid up to 21 psi. If you do not already own any of the Hop Bong fittings listed below, the Kegmenter Hop Bong Pressure Pack is also available as a complete kit. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port This should only be used with a Red 35 psi PRV or the Yellow 17 psi PRV. 2" T.C. Ferrule 4" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (see below for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank. Hop Bong To use the Pressure Lid with the 2" Hop Bong, we recommend the following fittings if you do not have them already: 2 x Red Ball Lock Cap (FE13) 1 x Yellow Ball Lock Cap (FE146) 1 x 4" Tri-Clamp, 3 Segment Clamp (H734) 1 x 4" Tri-Clamp Seal (FF401) 3 x 2" Tri-Clamp (FF20) 3 x 2" Tri-Clamp Seal (FF201) 1 x 2" Butterfly Valve (FE198) 1 x 2" Hop Bong (FE202) 1 x 2" Hop Bong Cap (FE204) 1 x PCO1881 PRV Cap (KG523) 1 x Red 35 psi PRV (FE101C) Please note: The last product photo is an example image of what the lid looks like fully fitted out with the Hop Bong and other accessories that are not included with the lid.

Read more less

#5.5 stopper - with 3/8 inch hole. Top diameter 1.11 inches (28 mm), bottom diameter 0.95 inches (24 mm), length 1 inch (25mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet.  To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Russian River Brewing Company THE original Pliny the Elder recipe, given to us directly by Vinnie at Russian River Brewing Company High bitterness and intense hop flavor with a dry malt finish Includes whole Cascade, Magnum, Simcoe®, Columbus, and Centennial hops Estimated ABV: 8% Estimated IBUs: 100+ Makes 5 gallons of finished beer Pliny the Elder is a truly amazing beer with a cult like following, and was once one of the hardest IPAs to find, as Russian River brewed it in very limited quantities. Depending on where you live, it may still be next to impossible to track down! But with this killer clone kit you can make your own Pliny and perhaps you will develop your own cult following where you are worshiped by your beer loving friends. (Hey, it could happen!). Light malt color, huge hops, and a dry finish. Be prepared for an outrageous amount of flavor. This is THE original Pliny the Elder recipe, given to us directly by Vinnie at Russian River Brewing Company. This beer is an intense Double IPA. High bitterness with a dry malt finish, 8% alcohol, 6 separate hot side hop additions, 3 separate dry hop additions, and intense hop flavor and aroma! Pliny sets the standard for Double IPAs! Who is Pliny the Elder? This beer is named after Gainus Plinius Secondus, or Pliny the Elder, a Roman author, lawyer, naval man and naturalist who first mentions the botanical name for hops in his writings - lupus salictarius, which translated from Latin means Wolf Among Willows. Sadly, Pliny died while helping people escape the eruption of Mt. Vesuvius in August, 79 AD. Pliny the Younger was the nephew of Pliny the Elder and is the name of another outrageous and highly sought-after beer from Russian River. Russian River Brewing If you have not tasted beers from Russian River Brewing Company, you should put it way up on your priority list. This is a brewery with huge demand that keeps quality as a first priority. Owner Vinnie Cilurzo is also unique in that he still actively brews and tests recipes and ingredients (on a MoreBeer! Brewsculpture by the way) on a constant basis. Amazing. Makes 5 gallons Estimated Original Gravity: 1.070-74 SRM (Color Range): 10 IBUs: 198-202 (this is a theoretical number, you will actually get around 100 IBU) Estimated Alcohol Percentage: 8% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

This simple pump kit is a great way to clean your draft lines when you don't want to waste CO2 or mix up a full batch of line cleaner. The PCO tee piece can be attached to a PET beer bottle or repurposed soda bottle, then pressurized with the hand pump to push cleaner through your ball lock disconnect and draft lines. You can also use the pump kit to turn just about any PET bottle into a mini party keg; one that's easy to take with you while leaving your gas equipment at home. But since you'll be using air to push the beer out, we recommend consuming the contents of the bottle well within 24 hours. Kit Contains: Yellow carbonation cap Red Tee Piece - 28mm PCO 1881 Threads (Female x Male x Male) Mini yellow hand pump 11.75" length of EVABarrier tubing (5mm ID x 8mm OD) PET Bottle not included KegLand Part Number: KL20220  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock. Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)

Read more less

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 65L Gen 4 BrewZilla with 6 Watt Pump. Made from food grade silicone and temperature resistant to 356°F (180°C). KegLand Part Number: KL24778

Read more less

This high-quality Replacement Valve features a 1/2″ Barb OD, compatible with all models of Anvil Stainless Bucket Fermenters and Anvil Foundry™ Brewing Systems. Enhance your brewing setup’s efficiency with this durable, easy-to-install valve designed for seamless integration and improved performance.  

Read more less

This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect. Comes in a convenient zip lock bag.

Read more less

Built-in external cooling jacket with 1.5" TC Ports Pressure Pack lid with floating dip tube and draft style QD connections for sampling/serving Tri-clamp thermowell, sealed pressure gauge, and pressure relief valve included Full draining dish bottom design with center bottom tri-clamp drain Highest quality mirror polish finish inside and out Welded, ground, and polished interior welds provide the highest quality and are optimal for sanitation BrewBuilt Brite Tanks are perfect for carbonation, clarification, maturation, and storage of your finest brews. This tank will fit seamlessly into your brewing setup to help optimize space without compromising capacity. Featuring smooth, polished interior surfaces that make cleaning a breeze and ensures complete sanitation. These units set the standard for affordable brewing tanks without sacrificing quality. Built to handle high pressures for effective carbonation and conditioning, the BrewBuilt Brite Tank comes standard with a sealed pressure gauge and professional-quality tri-clamp PRV. The Pressure Pack, which installs in the 8" TC lid, features a floating dip tube with filter attachment that draws the clearest beer in the tank from the top down. The Pressure Pack's ball lock keg posts allow for easy integration into your draft system so you can serve directly from the tank.  The tank features a dish-shaped bottom and centered 1.5" drain pipe to allow for easy removal of trub, yeast, and other sediments that settle at the bottom of the tank to help clarify the beer and improve quality. The bottom drain also efficiently transfers beer to kegs, bottles, or cans. Features: External cooling jacket with 1.5" tri-clamp connections Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down Comes complete with 15 PSI pressure valve and sealed pressure gauge 8" lid cap opening with 8” TC clamp Extra 1.5" TC hop port on the lid 1.5" TC thermowell for inserting thermal probe Extra 1.5" TC port at the front for installing a carbonation stone or sample valve Centered bottom drain with 1.5" butterfly valve 4-leg standing design with reinforced crossbars & threaded feet Interior welds are the best in the business - uniquely ground and polished Specs: Grade 304 Stainless Steel Mirror Polish Finish Interior & Exterior Working Volume: 2 bbl Max Volume: 2.2 bbl Working Pressure: 1 Bar (14.5) Overall Height (w/ fittings): 62" All ports are 1.5" TC except 8" TC Top Port and 4" TC Pressure Pack Port  

Read more less

These replacement poppets will keep your old kegs holding pressure just like new.   These are the most common poppet that we sell. They will fit nearly every keg out there. Technically they are for Cornelius brand "Spartan" and "Super Champion" kegs. They will also fit Cornelius brand Pin Lock "R" kegs. Each keg uses two.  

Read more less

Golden Light is an excellent choice as a base or to boost gravity. Slightly darker and richer in biscuity/bready flavors than Pilsen extract DME can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Dried Malt Extract (DME) is the primary sugar source in extract brewing and can be used in partial-mash or all grain brewing to adjust flavor, color and gravity of brews.  DME can also be used to increase head retention and body. Many brewers choose nutrient rich DME as the sugar source for making yeast starters as well. Briess dried malt extracts are made from 100% malt and water. Golden Light DME: 100% pure malt extract made from 99% base malt,1% Carapils® Malt, and water. Golden Light is an excellent light malt extract . With a malty flavor, it can be used in the production of any beer style, either as a base or to boost gravity. Slightly darker and richer in biscuity/bready flavors than Pilsen extract. Preferred in the production of most ales. Typical Analysis: Color (8° Plato): 4.0 SRM Fermentability: 75% Solids: 97% 1.043 PPG

Read more less

3-way stainless steel tee with 5/16" barbed ends. Use the tee to split gas lines to push multiple kegs with one CO2 tank. KegLand Part Number: KL04442  

Read more less

This false bottom fits great inside a 10 gallon mash tun, like our Rubbermaid coolers.   Due to it's domed shape, this particular false bottom can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   This false bottom can be used in converted Sanke kegs as well.   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Ultimate BrewZilla Combo Pack! Get the Gen 4 BrewZilla & our most highly recommended accessories at an unbeatable price! Includes all of our favorite accessories for the BrewZilla including the Neoprene Jacket to speed up heating times, Hop Spider to keep vegetal matter out of your wort, and Chilling Connection Kit so you're ready to use the Immersion Chiller out of the box We think all BrewZilla brewers will eventually upgrade their systems with these accessories, so buy them together and reap the savings! Also available in 110V (AG581) Combo Pack Includes: BrewZilla Brewing System | Gen 4 | 9.25G | 220V Neoprene Jacket Hop Spider Wort Chiller Connection Kit Gen 4 BrewZilla All-in-One Brewing System WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA 6-30P plug Requires NEMA 6-30R receptacle Requires 11 amps from 30 amp circuit Dual heating elements (1900 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 220–240V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge

Read more less

The KOMOS D-Style coupler is built for use with the most common commercial sanke kegs sold in the USA. Featuring stainless steel body and stainless steel probe, this keg tap is made to last. The coupler comes without fittings so it can be adapted however you sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port. Both gas-in and bev-out ports come bare so you can fit it out exactly how you want it. Maybe you like a larger gas line and smaller beer line—no problem. Or perhaps you're ready to take your draft system into the 21st century with EVABarrier draft tubing and Duotight push-to-connect fittings. Whatever floats your boat, keep your draft setup anchored with the KOMOS keg coupler. The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a higher or lower pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.  

Read more less

The CMBecker Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 4mm. When using with 3/16" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) Just make sure you clamp it properly to get a good seal This will not work with a standard shank, it works with CMBecker shanks. These seal at two places and do not have a flat end (see photo)

Read more less

The most affordable ball lock quick disconnect we offer! Black color easily identifies the QD for beverage use 1/4" flare thread connection The black, beverage-out quick disconnect with male flare fitting. Convenient to use, easy to clean.  Find out for yourself why so many brewers prefer to work with flared keg fittings. Because the fitting-tubing junction is threaded, it can be easily disconnected for cleaning without having to clip your line. Also makes swapping between ball lock and pin lock kegs in the same draft system a snap! Kegland Part Number: KL02974

Read more less

The Kettle Tube allows you to better filter trub and whole hops from your wort while transferring from your kettle to your fermenter. It is a rugged tube of stainless steel screen 12" in length, 1" in diameter, with a 1/2" MPT fitting at one end, and is our replacement for the discontinued Bazooka Screen. This fitting is intended for use with kettles that have 1/2" FPT threads on the inside of the kettle, or it can be used on the back of any of our line of Weldless Ball Valves. Excellent for straining out leaf hops in the boil kettle (Pellet hops can clog the screen). We also have several customers who use this as a screen in their Cooler Mash Tun! Kegland Part Number: KL03766

Read more less

Secure Fit: Designed with a ridge and gentle taper to prevent slipping or being sucked in, ensuring a reliable seal during use. Self-Sealing Vent: Equipped with vent holes that allow air to escape but prevent it from entering the fermenter. Easy Maintenance: Simple to clean and sanitize, making it highly convenient for repeated use. Replaces stopper sizes #8 and #9 This CellarScience Bung has a ridge to keep it from getting sucked in and self-sealing vent holes to let air out but not in. They have a gentle taper, so they don’t slip out during use. They are also very easy to clean and sanitize. Replaces Stopper Sizes #8, #9 Stopper Measurements: 1.36" x 1.89" (34.5 mm x 48 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Breathable Carboy Bung and the Breathable Barrel Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.

Read more less

BrewMometer O-rings (package of 25)

Read more less

Keep your draft faucet in perfect working order! Replace your old or broken friction bonnet to keep your fauce lever moving properly   This friction Bonnet is the piece that sits between the Faucet and the Faucet Knob Lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.

Read more less

For use with stopper and airlock on 6 gallon bucket. Comes with 1 3/8" hole which fits a #6 or universal stopper. Please Note: Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage.

Read more less

High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Fits all male 1/2" NPT and BSP fittings 8 mm Duotight compatible stainless steel barb tail The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation. Specs: Stainless steel and silicone construction Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced 5/16" (8mm) OD barb tail KegLand Part Number: KL31615

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   304 stainless steel splash resistant construction Industrial design using commercial quality components for long life and easy serviceability On/Off thermostat control Outlet fully disconnected when powered off for added safety, unlike some one-leg designs Wall mount bracket allows you to get the controller off the table and out of the way Keep your temps tight with the BrewBuilt™ HLT Controller! Perfect for keeping your sparge water or mash water at your set temperature—it allows you to control a 208-240V heating element up to 30 amps based on temperature. The controller works by turning the burner power on and off at 100% power until it reaches the temperature setpoint. Features industrial-style power switches, and a 1/6 DIN Controller mounted on a splash resistant stainless steel enclosure. Pre-cut mounting holes allow you to hang the controller on your brew stand on the wall at eye-level. We highly recommend mounting the controller so you don't have to worry about keeping an area of your table dry where you might lay it down. L6-30 connections with 4 ft. cords on either end. Compatible with all 208-240V elements 30 amps and lower. While L6-30 are the most common elements available, yours may need an adapter. Uses a 9' stainless braided PT-100 temperature sensor. The HLT Controller includes a contactor to fully shut off both legs when you throw the power switch, making the free end of the cord safer when the element is not plugged in. If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.   **Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**    

Read more less

If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valve have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 3" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation. 3" tri-clamp 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 35L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28103

Read more less

Brass reducing bush. 1/2" BSPP x 3/4" BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL26338

Read more less

For use with stopper and airlock on 6 gallon bucket. Comes with 1 1/4" hole which fits a #7 or universal stopper. Please Note: Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage.

Read more less

Make your Gen 4 BrewZilla even smarter by pairing it with the RAPT Bluetooth Thermometer Take mash temp readings from the top and bottom of your grain bed simultaneously Set a temperature diffential between the readings to enable the BrewZilla RAPT controller to more accurately maintain temps and perform mash steps Monitor coolant water temps during distillation runs and set alarms to alert you if the temperature is too high Automatically log brew days with detailed information to your RAPT Portal account Huge temperature range from -4°F to 572°F is easy to read on the backlit digital display Orange backing plate can clip to the rim of your BrewZilla and is also magnetic AAA batteries included This low energy, RAPT-enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE (Bluetooth Low Energy) thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process. For example, the BLE thermometer probe can be put into the middle of the malt pipe so the BrewZilla can more accurately control elements switching on/off to achieve a core malt pipe temperature, or the thermometer can be placed into your coolant water during distillation runs so you get an alarm if the temperature is too high. RAPT Connectivity The new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, or RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to send push notifications to your mobile phone of when it's time to begin sparging or begin other steps in your brewing process. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included) KegLand Part Number: KL24334 RAPT Bluetooth Thermometer | User Guide

Read more less

The Blichmann HopRocket™ is a great tool for all hop-heads. Mainly used as a hop back, but has also been used inline in dispensing draft beer (Randal). The Hop Rocket can fit up to 3oz. of whole leaf hops to add that extra hop kick to any beer!   Pressure tight up to 40PSI! Holds up to 3oz. of whole leaf hops 100% Stainless steel construction with silicone gaskets No need to monitor the wort levels as it will not overflow Fine filter with wiper seal sends very clear wort to your fermenter Coarse filter and coned bottom inlet help prevent backup and wort channeling Uses 1/2" NPT connections for a universal fit!

Read more less

Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 2 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining. Features: Removable grill Made from stainless steel 11.8" L x 6.7" W x 0.6" D Kegland Part number: KL13161

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Enhanced Cooling & Clarity: Includes an innovative jacketing system for efficient cooling and a welded tangential arm for enhanced whirlpooling, ensuring clear wort transfers and maximum hop utilization. SlingBlade Heating Element: Ultra-low watt density element heats efficiently without obstructing other kettle accessories. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Elevate your homebrewing craft with BrewBuilt Boil Kettles – where professional-grade design meets passionate homebrewers. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our Boil Kettles feature an innovative jacketing system for effective cooling, helping you reach desired temperatures more quickly and precisely. They also include a welded tangential arm for optimal whirlpooling, ensuring clear wort transfers and maximum hop utilization. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. These kettles are also designed to work hand-in-glove with the included SlingBlade Heating Elements, offering seamless integration for electric brewing setups. Power cord or controller must be purchased separately. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Elevate your brewing experience with BrewBuilt Boil Kettles, designed for the serious homebrewer. Major Features for Brewers: High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Jacketing System for efficient heating Welded Tangential Arm for superior whirlpooling High Quality sanitary welded TC Ferrules SlingBlade Electric Heating Element(s) (240V) Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Loaded Boil Kettle Includes: Jacketed Bottom Drain Boil Kettle with Tangential Arm SlingBlade Heating Element(s) Thermowell Butterfly Valves TC Clamps and Gaskets Notched Lid with TC CIP Port Feet SlingBlade Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 20 & 30 gal element 50-gallon kettle requires 2 x 30 amp circuits Includes 2 x 5750 Watt elements Wattage: 10 gal - 3750 Watts 15 gal - 4500 Watts 20 gal - 5000 Watts 30 gal - 5750 Watts Cooling Jacket Operating Limits Maximum Operating Pressure: 15 PSI (1.0 BAR). Always ensure your glycol chiller or liquid cooling source is regulated below 15 PSI. Unrestricted Flow Required: Keep the jacket outlet port open and unblocked during operation. Never cap or valve off the outlet return line, as fluid needs to circulate freely to prevent pressure buildup. Please Note: The kettle does not include a power cord for the heating element. You will need to purchase a power cord or your preferred element controller separately. Warning: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.  

Read more less