Search results for "ss brewtech gasket"

Replacement lid for the Megamouth series ball lock Torpedo Kegs. Includes o-ring and PRV rated to 85 psi. This is an extra-large corny style keg lid that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

U-Type keg coupler for Guinness and some other Euorpean beer kegs Stainless steel keg probe and coupler body Pull-style lever handle Includes 3/8" OD barb for gas inlet A special tap that is required for Guinness kegs. U-Type Tap. Also known as a keg coupler, coupling, or adapter. Will Usually Fit: Abby White Boddingtons Pub Ale Guinness Stout Harp Kilkenny Leffe Magners Smithwicks Ale

Read more less

Unanimously loved as a late addition or dry hop in Hazys, West Coast IPAs, Pale Ales, and other hop-forward styles Aroma Profile: Citrus, Stone Fruit, Tropical, Woody Alpha Acids: 21.0 – 28.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 21.0 – 28.0% Beta Acids: 5.0 – 9.0% Total Oil: 2.0 – 6.0%   Citra® is a registered trademark owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

Pilsen Light has a subtle malty flavor and is the lightest DME available from Briess.  DME can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Dried Malt Extract (DME) is the primary sugar source in extract brewing and can be used in partial-mash or all grain brewing to adjust flavor, color and gravity of brews.  DME can also be used to increase head retention and body. Many brewers choose nutrient rich DME as the sugar source for making yeast starters as well. Briess dried malt extracts are made from 100% malt and water. Pilsen Light DME: 100% pure malt barley extract made from 99% Pilsen Malt, 1% Carapils® Malt, and water. Pilsen Light is the lightest DME available from Briess. With a subtle malty flavor, it can be used in the production of any beer style, either as a base or to boost gravity.   Typical Analysis: Color (8° Plato): 2.0 SRM Fermentability: 75% Solids: 97% 1.043 PPG

Read more less

The Pluto Beverage Gun is the ultimate hand held beer tap! If you have been dispensing your draft beer out of a standard picnic tap, it's time to upgrade. Definitely one of the coolest draft beer taps that we've seen, this Pluto Beverage Gun is made from nylon and stainless steel. The body is plastic, while the barb, piston, and spring are all stainless. Comes with a 1/4" duotight-compatible barb perfect for use with EVABarrier draft line. You will need either the 8mm x 6.5mm or 9.5mm x 6.5mm Duotight reducer to connect the EVABarrier to the Pluto. Kegland Part number: KL00956

Read more less

S-33 is an ideal strain for enhancing the hoppy and fruity expressions of your beer Fruit-forward character and imparts a high mouthfeel and body to the beer Especially recommended for Belgian Ales, strong English ales, and New England IPAs and Hazys Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world If you’re going for a custom-made Belgian style beer you’ll want to keep some of this dry yeast on hand. Safale S-33 is a great yeast strain for Belgian style beers, such as Belgian wheats and Trappist-style Ales. Provides the characteristic phenolics of beers in Belgium. This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below. Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel. Attenuation: 68-72% Sedimentation Time: Medium Alcohol Tolerance: 9-11% ABV Optimum Fermentation Temp: 64-78°F *See the technical data sheet below for more information on rehydration, usage and storage.

Read more less

Replacement Thermal Protector for BrewBuilt™ IceMaster 100 & Max 4 Compressor. For IceMaster Max 2, click here.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Ultimate BrewZilla Combo Pack! Get the Gen 4 BrewZilla & our most highly recommended accessories at an unbeatable price! Includes all of our favorite accessories for the BrewZilla including the Neoprene Jacket to speed up heating times, Hop Spider to keep vegetal matter out of your wort, and Chilling Connection Kit so you're ready to use the Immersion Chiller out of the box We think all BrewZilla brewers will eventually upgrade their systems with these accessories, so buy them together and reap the savings! Also available in 220V (AG583) Combo Pack Includes: BrewZilla Brewing System | Gen 4 | 9.25G | 110V Neoprene Jacket Hop Spider Wort Chiller Connection Kit Gen 4 BrewZilla All-in-One Brewing System WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 110-120V power and plug 12.5A Requires 20A circuit Dual heating elements (1000 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 110–120V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge

Read more less

Stop stirring your wort with a spoon and allow the BrewZilla's internal pump to do the work with this new Whirlpool Arm accessory. Fits all sizes of BrewZilla. The whirlpool arm fits onto the existing recirculation pipe with a stainless steel male camlock fitting. The BrewZilla's internal magnetic pump will aid in circulating your wort for better hop extraction in the whirlpool stage, as well as help collect the hot break into the center of the false bottom. Whirlpooling while cooling with the immersion heat exchanger will also speed up chilling times. Specifications: 304 Stainless Steel Fitted Male Camlock fitting Soft Safety Grip Length 520mm (20.5")   Kegland Part Number: KL14199

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late November.   A-Type keg coupler fits most German beer kegs such as Paulaner and Spaten Click-to-engage ergo lever handle Includes 1/4" OD barbs for gas inlet and liquid outlet Barb elbow outlet is ideal for low clearance keg storage and easier line routing For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD. This model features a pull-ring pressure relief valve (not pictured). This Keg Tap Will Usually Fit: Ayinger Bitburger Pilsner Delirium Tremens (Belgium) Erdinger Hefetrub Weisse Fischer Franziskaner Hefe-Weisse Hacker-Pschorr Weisse Hoegaarden White Isenbeck Krombacher Kronenbourg 1664 Paulaner Spaten Staropramen Victoria Bitter Warsteiner KegLand Part number: KL06057

Read more less

Thermowell for temperature sensors. 160mm length recommended for F100, F150, and F300 fermenters. TC 34mm Inside diameter: 7mm Length: 160mm

Read more less

This stainless steel hop tube is ideal for keeping kettle additions from clogging your pump or heat exchanger, and works perfectly for dry hopping in a keg or wide-mouth fermenter. Holds approximately 5 oz of pellet hops, allowing some space to permit full extraction of the hop oils. The stainless chain makes it the perfect partner to our Corny Keg Lid with Welded Tab. Hang the tube inside your keg for post fermentation hop, fruit, wood chip, or spice additions. When it's time to remove the hops/adjuncts simply pull the tube out. Works great for timing exactly how long your beer sits on the hops, oak, or other flavoring addition. 2.6" diameter 11.8" tall Made from 304 stainless steel Kegland Part Number: KL05210

Read more less

If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 4 mm (5/32") ID size is perfect for homebrew draft applications where only a short beer line is needed. We recommend using 5-6 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. Kegland Part number: KL06224

Read more less

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will need to drill a 1" hole to install the bulkhead. 

Read more less

These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go. One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. With the 74g adapter piece, these cartridges can be used with the KegLand Core 360 Mini Regulator or Torpedo Mini CO2 Regulator. 5/8-18 UNF threading Kegland Part Number: KL16889 Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.

Read more less

This is a must have for any home brewer! No rinse, no worries, no contaminations! Only requires 1 minute of contact time for effective sanitization High-foaming to ensure maximum coverage and contact in all the nooks and crannies in larger equipment Don't fear the foam! Residual foam in your fermenter, bottles, or kegs will have no impact on your finished beer Five Star Chemicals is a full-service cleaning provider with a proven record in the craft beverage industries since 1980 Buy in bulk for even more savings! Star San is an acid-based sanitizer that is quick, odorless, tasteless, and safe for most materials except softer metals. As a high foamer, it’s foaming action ensures coverage and contact time in larger vessels and better penetration into nooks and crannies. Any foam that is left over in your carboy or keg will not harm your beer or you. If you plan on making some up for spray application, it is best to use distilled or RO water to maximize the life of the unused portion (minerals in tap water reduce the shelf life of Star San once in solution). If a lower foaming alternative is preferred, for bottling or multiple batches, check out Saniclean. Use 1 oz per 5 gallons of water Contact time of 1 minute Completely safe and non-toxic Will not impart any flavors or odors Please note: Due to DOT HAZMAT shipping restrictions, orders for 15-gallon, 55-gallon, or multiple 5-gallon units will require freight shipping. These sizes are intended for commercial use. HAZMAT items are not able to be returned.

Read more less

This is a rather simple, but extremely effective way to fill growlers from your draft system! Going to a party, but don't want to bring a keg of homebrew? Filling straight from the faucet creates a lot of foam, and you lose carbonation. Simply plug this filler into your faucet, attach some 3/8" tubing, and fill! This model is designed to fit Intertap faucets. Compatible with Intertap and NukaTap faucets. Kegland Part number: KL01045  

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/2" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06453

Read more less

Easily set and view different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds! Built-in pressure gauge for easy reference when adjusting pressure settings Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Compatible with both liquid and gas 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Duotight In-Line Regulator is an ideal solution if you want to serve different beers at different gas pressures. In a typical multiple line, multiple pressure system you would run a gas line from your main regulator into a secondary regulator where you would set different pressures. While that is ideal, it is a little pricey. This little sweetheart lets you set different pressures at a far lower cost. What we do is set the main regulator at the highest pressure we want in the system - for example a keg of soda that you want to carbonate and serve at 25 psi. Run the gas line into a manifold and then install one of these after the manifold on each line where you want to decrease the pressure, for example lowering to 10psi to serve your British pale ale and 14 psi to serve your summertime lawnmower lager. Works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15035

Read more less

The counter pressure bottle filler that sets the standard for filling beer bottles at home.  With a unique one way valve and adjustable pressure relief you will be bottling sediment free homebrew with ease.   If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles. Counter pressure bottle filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well. Made by Fermentap, the design has two unique features. Number 1 it is the only model made entirely from stainless steel. Number 2 you flush and fill from the bottom of the bottle. Beer barb is 3/16". Gas barb is 5/16". Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler? More Details The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing. Setting Your PSI Pressure Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour. An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case. Make sure your keg is always kept cold. If your keg warms up you will have foaming issues.     

Read more less

Type B Camlock Fitting. Female Camlock with 1/2" Male BSP. Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04480

Read more less

This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out. Compatible with all NukaTap faucets, including Gen 2 Flow Control. KegLand Part Number: KL35958

Read more less

Replacement seals for 6m² Two Stage Heat Exchanger sized for 15 to 30 bbls.  

Read more less

Control beverage flow as liquid leaves the keg—replaces the need for flow control faucets or compensators downstream Perfect for mobile draft applications when you can't balance your lines on the fly Made from stainless steel for high-durability Black ring above the outer bushing to identify the QD for beverage use Compatible with all ball lock style homebrew kegs 1/4" flare thread connection Pick up this Flow Control Ball Lock Disconnect and stop banging your head against the wall trying to balance your draft line. We're all after the same thing -- the perfect pour -- but balancing beer lines can be a daunting task. You do the research and crunch the numbers, choose the right inner diameter line, cut it to the ideal length, only to spend your evenings dialing your regulator setting back and forth like a turtle-necked safecracker. This stainless steel flow control disconnect will eliminate the guess work and fast track you to perfectly pouring beer. Flow control faucets are a popular option but they're inherently flawed due to the point of restriction being at the very end of the beer line. The flow control apparatus inside the faucet causes turbulence, which leads to foaming and carbonation coming out of solution prematurely. Flow control disconnects on the other hand restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. Another advantage of FC disconnects is that you don't have to rely on a small inner diameter or long line length to apply flow resistance. In fact, even in the fully open position the disconnect will provide some inherent flow resistance, so you should use a shorter line than the 5-6 ft. length that is typically recommended. This makes the flow control disconnect ideal for dispensing beer on the go where you might have a picnic tap with a short line or a disconnect faucet adapter with no line at all!   Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting. Kegland Part Number: KL09041  

Read more less

With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank. Pick up the Pressure Kit and turn your FermZilla into a true unitank! The silicone dip tube is 31" long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack. With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you're pulling samples mid-fermentation! Fermenting Under Pressure: The pressure kit allows for fermenting under pressure, which will reduce esters and fusel alcohol production. This means you can ferment at warmer temperatures than you normally would, even making lagers at room temperature. Most commerical beer is fermented under pressure simply due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the distinct differences between homebrewing and brewing on a commercial scale. The FermZilla's lid already comes with a built-in pressure relief valve that will blow at 35 psi; the pressure kit simply allows you to add CO2 through the ball lock fitting. We strongly recommend that you also purchase an adjustable pressure relief valve, or spunding valve, which allows you to set a lower pressure. It's always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Transferring, and Serving: When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using a spunding valve. This means you can eliminate kegging and serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Attach a beer line from the FermZilla's bev out to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Eliminate Oxidation: Since the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features: Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.

Read more less

Everything you need to start enjoying your delicious beer on draft! No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator Featuring a brand-new ball lock corny keg with rubber booted bottom and top handles EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap! From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 2.5 or 5 gallon Ball Lock Corny Keg. These brand-new kegs are made in the style of the iconic Cornelius homebrew keg with rubber base and molded rubber handles at the top. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Ball Lock Corny Keg (2.5 or 5 gal) EVABarrier beer & gas lines Duotight Ball Lock Quick Disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

Read more less

Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!   Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.   Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.   To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

Read more less

Keep fruit flies and spiders out of your draft beer faucet with this handy plug brush. Plugs your faucet when you are not using it. Attached brush cleans faucet on the way in and out. We like to spray the brush moist with Alpet Spray Sanitizer for the most sanitary seal possible. Note: Does not sit flush on Intertap, NukaTap or Perlick faucets

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 4" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

Panel mounted fitting from TC34mm to 12mm barb with M28 threads and nut. Used with MiniChilly 17 for glycol loops.

Read more less

Possibly the most popular modern brewing hop around. Citra® hops are highly sought after among craft and home brewers for their intense citrus aroma and flavor. Citra® boasts grapefruit and lime aromas along with gooseberry, passion fruit, and lychee notes. You simply can't go wrong using these hops for late additions or dry hopping when you want to make that ultimate hop bomb Hazy IPA. Citra® also has a fairly high alpha acid content making it a solid choice for bittering IPAs, Pales, and American Ales. Hop Statistics Alpha Acids: 11.0 – 13.0% Beta Acids: 3.5 – 4.5% Alpha-Beta Ratio: 2.4 – 3.7 Cohumulone: (% of alpha acids): 22 – 24% Total Oils in mls per 100 grams dried: 2.2 – 2.8 Similar Hop Varieties: Simcoe®, Mosaic®   Citra® is a registered trademark owned by Hop Breeding Company.  

Read more less

Replacement Flat Lid for FermZilla. Includes o-ring. Fits all models and sizes of FermZilla fermenters.

Read more less