Use this valve with a standard soda bottle as an inexpensive and effective dry hopping solution Attaches to the PCO 1881 threaded port on the FermZilla fermenter's lid Carbonation Cap and Tee Piece can be added to allow for purging the hops with CO2 This really handy stainless adapter ball valve will enable you to connect two PCO 1881 threads with a valve in between. Each side has an integrated O-ring that will seal on the neck of the PCO1881 Thread. Ideally suited to making a dry hop device for FermZilla with a standard soda bottle or PET growler with PCO 1881 threaded neck. As shown in the photo, if you use this stainless ball valve in conjunction with the PCO 1881 Tee Piece and the Carbonation Cap, you will have the added advantage of being able to use CO2 to purge out oxygen from the hops before you dry hop. This assembly makes an inexpensive and very effective dry hopping tool. Please note: Dry hop pellets will require a bit of a shake to get them to fall through the 3/4" bore. Tapping the PET bottle should be enough to make the hops fall down into the fermenter through the ball valve. KegLand Part Number: KL18074
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid December.
The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt X3 Conical's 3" T.C. bottom port.
Not compatible with BrewBuilt X1 or X2 Uni Conicals which feature a 2" bottom port.
3" tri-clamp
Stainless steel handle
7 locking positions
Squeeze trigger locking handle
Made from 304 stainless steel
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use. Sold Separately: NukaTap Mini Beer Faucet (D1598) Flow Control Ball Lock Disconnect (DUO159) Mini Self Closing Spring (D1598A) KegLand Part Number: KL32209
The Milwaukee MA955 CO2 Gas on/off Soleniod Valve is a High Quality brass fittings valve, designed for long lasting use in your Aquarium and Hydroponics applications. Can be used with all Milwaukee controllers. Set of one per package.
The Milwaukee MA955 High Quality CO2 valve has a 4' cord, standard brass fittings and 110v power requirements. To be used with ALL Milwaukee MCXXX Controllers.
Insulation Jacket for MiniUni™ standard model fermenter.
Reduces condensation on the tank during big differences in temperature.
Made from 5mm neoprene.
Tune the Stout Spout on your Intertap or NukaTap faucet with this set of perforated discs! Not all beverages are the same so this kit offers a range of aerator discs so you can find the perfect disc for your stout or cold brew coffee. The Stout Spout has a removable creamer/aerator disc inside. It is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. With this range of discs, you can mix and match with ease to find which one serves your particular beverage justice with more restriction or more areas for that creaming effect to push through the spout. Kit Contains: 0.3mm Drilled Disc with 3 x holes 0.3mm Drilled Disc with 5 x holes 0.5mm Drilled Disc with 1 x hole 0.5mm Drilled Disc with 3 x holes 0.5mm Drilled Disc with 5 x holes 0.7mm Drilled Disc with 1 x hole 0.7mm Drilled Disc with 3 x holes KegLand Part Number: KL12591
The BrewBuilt tri-clamp thermometer features a large 3" face for easy reads and 2" probe is less obtrusive in your conical fermenter or T.C. kettle. Dial face reads from 0-220°F and -10-100°C.
3" dial face
2" probe
1.5" T.C.
Reads in °F and °C
Take your beer on the go with the help of this handy growler filler attachment for Perlick 630SS and 650SS faucets. Filling growlers straight from the tap is tough task, and you're more than likely to lose most of the beer's carbonation in the process. By running a short line of 3/8" tubing from the growler filler to the bottom of your growler, the beer can flow gently into the vessel and fill from the bottom up. Be sure to use the flow control knob to slow down the flow rate. If you're using the standard faucet, you may want to turn down the PSI on your regulator before filling.
If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 6.3 mm (1/4") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, we recommend using 20-25 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 6.3 mm (1/4") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. Kegland Part number: KL06248
This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing (D1717 / D1718) or 5/16" OD stainless or copper tubing. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL14595
US-05 produces clean and crispy ales with a well-balanced, neutral character
Stays in suspension during fermentation for great attenuation
Highly recommended for American ales and highly hopped beers
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
Formally US-56, US-05 is a strain of yeast that creates that classic American profile of clean malt, crisp taste, low diacetyl, and ability to ferment in a wide range of temps. Look for US-05 to be the next popular dried yeast.
This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below.
Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Attenuation: 78-82%
Sedimentation Time: Medium
Alcohol Tolerance: 9-11% ABV
Optimum Fermentation Temp: 64-78°F
*See the technical data sheet below for more information on rehydration, usage and storage.
If you’re a beermaker who focuses on maintaining a sanitary brewing setup, you will like the advantages of using tri-clover connects any place you need to attach tubing to equipment. They make a sanitary connection that is designed to be cleaned in place.The straightforward design makes them easy to clean because there are no pockets or moving parts for bacteria to get stuck in. They make a very sturdy connection that doesn’t leak. Each connection requires a gasket and a clamp.
Product Specifications
Stainless Steel
1/2 in., 1.5 in.
Tri-Clamp Connection
Converts 1.5" Clover to 1/2" Barb for connecting 1/2" ID Tubing.
This stainless ball valve has a PCO 1881 female thread on one side for attaching to the male thread on the FermZilla lid or collection container and a 3/4" BSP Female thread on the other side for attaching other fittings.
The 20mm bore (approx.) makes it possible to perform low oxygen dry hopping through the ball valve.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in early 2027.
The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won't find a more powerful feature rich product.
Features:
Switchable Between 120V 1600W and 240V 2800W for Faster Heating & Better Boils.
Unique High Flow Grain Basket with 150% More Perforations to Virtually Eliminate Stuck Mashes.
Large Capacity Increases Efficiency and Grain Capacity.
Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds.
Ultra Low Watt Density, Triple Element Heaters - Won't Scorch.
Linear Digital Power Control and Solid-State Switching for Fine Tuning your Boil.
Turbo 500 Distillation Ready.
Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings.
Optional External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too.
Three Sizes Available: 18 Gallon for 10 gallon batches, 10.5 Gallon for 5 Gallon Batches and 6.5 Gallon for 2.5-3 Gallon Batches.
Caution! Do not CLAMP the lid in place while boiling. The steam buildup can lead to severe burns. The lid should only be clamped when used for distillation. Read all instructions and practice safe brewing.
A great way to repair your keg, even if you're not sure what type you have! This poppet works on all of the kegs that we sell, Pin or Ball lock! Poppets are pretty easy to damage or lose while cleaning your keg, and having a couple extra universal poppets on hand is a great way to make sure that you can always serve your homebrew!
Compatible with our ball and pin lock replacement body connects - KEG460G, KEG470G, KEG1100, KEG1101.
Get to boil faster and increase boil vigor by retaining heat! Manage steam by turning it back into liquid that can later be used for cleaning/sanitizing Avoid the sticky residue that boiling wort can leave on your walls and ceiling Reduce the power consumption during the boil with your BrewZilla or DigiBoil Perfect accessory for indoor brewers! No need to install a special Range Hood to manage steam Made with the apartment and basement brewer in mind, this steam condenser set made from high quality 304 stainless steel will help you manage steam and condensation during the boil. Assembles in minutes and can be used with the BrewZilla or DigiBoil with the proper Distillation Lid and 2" T.C. weldless bulkhead. This setup will reduce heat loss, meaning you'll get to boil faster and use less energy overall to maintain a rolling boil. When it's time to add hops, yeast nutrients, or other additions, simply remove the tri-clamp end cap and drop them in. (Use gloves, it will be hot!). With the new Pro Sight Glass Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions. If you've brewed indoors before, you're probably familiar with how sticky the evaporation coming off the boiling wort can be. The gummy layer of film it can leave behind on your painted walls and ceiling is no fun to clean up. And if you've been considering how to incorporate a range hood in your brewery to deal with the steam, now there's no need! Simply attach the Steam Condenser Set and run your kitchen tap or garden hose to the Duotight-compatible inlet. From the inlet, water will enter the column via a special spray head which can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. You'll find that a super-fast flow rate isn't necessary to cool boiling steam into liquid. Unlike the distillation process where the distillate needs to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough flow to form the steam back into liquid. Simple! After the steam is reformed into liquid, it will drain out of the bottom barb where you can install 3/8" ID silicone tubing. Recapture that water in a collection vessel and save it for cleaning and sanitizing! Once again, be aware that the water coming out will be very hot. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely. DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode.
DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely.
You Will Also Need: Tri-Clamp Distillation Lid OR
Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil With 2" T.C. Weldless Bulkhead (H707) OR
Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil 35L Lid connects directly 65L Lid requires 4" x 2" TC Reducer 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) 3/8" ID silicone tubing for the outlet Heat resistant brewing gloves Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Duotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately
NOTE: The kit does not include the Duotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm. KegLand Part Number: KL22842
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Heretic Brewing Company
Complex flavors of rich chocolate and caramel followed by a touch of warmth and a light malt sweetness
Includes Columbus and Cascade hops
Estimated ABV: 7%
Estimated IBUs: 33
Makes 5 gallons of finished beer
Dark as night, the Shallow Grave Porter is the perfect beer choice for a cool, dark evening. This a big Porter with complex flavors of rich chocolate and caramel followed by a touch of warmth and a light malt sweetness that will leave you ready for the next shovelful.
When we say big, we mean big, as this beer starts with a whopping 10 lbs of malt extract. The complex malt flavors come from a blend of Black Patent, Chocolate, and Crystal malts. Cascade and Columbus hops provide a firm backbone yet a subdued hop flavor.
This BrewMasters Series kit comes from Jamil Zainasheff who owns Heretic Brewing and is also a Brewing Network podcaster. Before he went pro, he won the California Homebrewer of the Year award twice, the national Ninkasi award for the best homebrewer in country, and hundreds of other brewing awards. He has been a MoreBeer! customer and friend since the 1990's. One of his favorite styles of beer is Porter and he continued to perfect this recipe over many years.
Makes 5 gallons
Estimated Original Gravity: 1.068-75
SRM (Color Range): 33
IBUs: 33
Estimated Alcohol Percentage: 7%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
S-shaped airlocks are the "OG" airlocks for home beer and winemaking. They make it easy to spot fermentation activity, and have no loose peices to lose.
The advantage of this type of airlock is that they have a smaller chamber so you can more closely observe the CO2 rising and therefore the rate of fermentation. They are also handy when you are cooling a beer as there is less chance of sucking airlock water back into the fermentation. They cannot be cleaned manually if they get dirty during the ferment. That is why many homebrewers prefer 3-piece airlocks for the active portion of the ferment, when the krausen (foam) from fermentation might be pushed up into the airlock.
Please Note: Stopper Not Included.
Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall.
For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still.
Kegland Part Number: KL10979
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
No Need to Upgrade Later, The X3 Comes Fully Loaded:
Built-in external cooling jacket with 1.5" TC Ports
Neoprene jacket for insulation
Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs.
The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible.
Highest quality mirror polish finish inside and out
Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation
New Features:
Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid
Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system
Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more
3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel
The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy! #BrewBuilt
External Cooling Jacket
When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation.
8” Tri-Clamp Top Port
New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure.
Extra Large 3” T.C. Dump Valve
The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester.
Reinforced Four-Leg Foundation
There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery.
The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.
Adjustable Feet
The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.
Flex Chamber Collection Jar - Trub Separator & Yeast Harvester
Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation.
Pressure Pack with Clear Float Technology
Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.
Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind.
Other Features You’ll Love:
Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off
Stainless steel lid clamp with single-piece molded silicone gasket
In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons
X3 Accessories:
BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation)
The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual.
Hop Bong Oxygen-Free Dry Hopping Device
The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
High Roller Caster Set
Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters.
IceMaster Max 2
Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected.
Immersion Heater
The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year.
Full List of X3 Conical Features:
External Cooling Jacket with 1.5" Tri-Clamp connections
Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down.
Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories
Neoprene insulation sleeve
Wide base with 4 legs for stability
304 stainless steel construction
Mirror polish finish
Interior welds are the best in the business - uniquely ground and polished
(1) 2“ TC port for direct immersion heaters
(3) Horizontal welded cone ports
(1) 8" Lid Cap Opening with 8” TC Clamp
(5) 1.5" TC Lid Openings
3" TC bottom dump with 3" TC butterfly valve
1.5" Thermowell for inserting thermal probe
(4) Adjustable feet
Silicone tube for blow off
Stainless 8” Three Piece Tri Clamp & one piece molded gasket
Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations)
For volume and dimensional specs, Download the PDF.
Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.
Replacement PCO38 tapping head. This is the tapping head only. For the full tapping head assembly see KG520. Comes with PCO38 female threads for attaching to the Oxebar Mono Keg and three PCCO1881 male threaded ports for attaching ball lock caps and PRV. KegLand Part Number: KL20169
This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 356°F (180°C).
KegLand Part Number: KL27731
These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs! Please Note: This False Bottom is for the BoilerMaker™ G2 15 gal Brew Pot by Blichmann Engineering™ and will not function with the G1 model. For a 15 gal G1 BoilerMaker False Bottom, see BL313.
All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 20 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 25 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 25 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Approximate Internal Dimensions: 23.5" Tall x 17.75" Ø 1.2 mm thick walls Kettle constructed from 201 stainless steel This item does not work with induction burners. A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately
Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating!
Heating is 10% faster and heat loss from the boiler is reduced by 50%
Remove the jacket after the boil to speed up chilling
Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap
Sparge arm sleeve included to reduce heat loss during mash recirculation
Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash.
This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located.
Features:
10% faster heat up time
50% less heat loss from boiler
Fits the 35L BrewZilla Gen 4
Made from 8 mm thick neoprene which is easy to wash after use
KegLand Part Number: KL24365
Finally, a high-quality, stainless steel, handheld faucet for discerning beer servers on the go! For too long there have been no other option than the standard plastic picnic tap. Torpedo Keg decided to fill the void with a top-shelf mobile draft faucet made with stainless components and internal parts. You'll feel the quality in the smooth pouring action and love the weight of it in your hand. This is definitely not the beer tap you used in college!
1/4" OD outlet barb will work well with 1/4" or 3/16" ID draft tubing.
Replacement o-ring for Universal Poppets. The poppet is the piece inside a ball lock or pin lock keg post that interfaces with homebrew keg quick disconnects.
Comes in a convenient zip lock bag.
The KOMOS multi tool is a convenient instrument to keep nearby that is suitable for most of the fittings you'll encounter when setting up or making adjustments to your kegerator or keezer. If you're kegging your brew then you're well acquainted with the many nuts, bolts, and clamps it takes to rig up a draft system. Even small adjustments will often have you walking back and forth from the tool box before the job done. The KOMOS draft tool offers 7 unique functions for tasks including faucet collar adjustments, shank hex nut adjustments, connecting or disconnecting a CO2 regulator and tank, removing Duotight fittings, and, most importantly, removing bottle caps from beer bottles.
The KOMOS multi tool is suitable for most connection adjustments, but if you're adjusting a CO2 regulator nut that has been overtightened, we recommend using a standard Crescent wrench for extra torque.
Functions:
CO2 Regulator Nut Spanner
Shank Hex Nut Spanner
Faucet Coupling Ring Pin Wrench
Flare Swivel Nut Spanner
8 mm Duotight Removal
9.5 mm Duotight Removal
Bottle Opener
Made of stainless steal.
Replacement lid for the Megamouth series ball lock Torpedo Kegs. Includes o-ring and PRV rated to 85 psi. This is an extra-large corny style keg lid that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.
Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com
