Replacement lock nut assembly O-ring for BevBright Lenticular Filter Housings. This circular O-ring gasket is located in the lock nut assembly between the white delrin and the stainless steel. Keep a spare on hand.
Digital (DS18B20) Inline sensor with M10 threads.
Used with an inline sensor holder to measure temperature on liquids passing the sensor.
Gasket is included.
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Fits all male 1/2" NPT and BSP fittings
9.5 mm Duotight compatible stainless steel barb tail
The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation.
Specs:
Stainless steel and silicone construction
Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced
3/8" (9.5mm) OD barb tail
KegLand Part Number: KL31622
Pick up two airlock and stopper combos for a lower price! Includes two S-Shaped airlocks and two Universal Stoppers. Fits a 2.8, 3, 5, 6, or 6.5 gallon glass carboy, as well as 500ml Erlenmeyer flask.
Please Note: This stopper will not fit in plastic carboys, Better Bottles or Speidel Plastic Fermenters.
304 cast stainless steel ball lock quick disconnect made for high-durability
White ring above the outer bushing to identify the QD for gas use
Compatible with all ball lock style homebrew kegs
1/4" barb connection
This is Ball Lock Quick Disconnect is constructed from stainless steel for lifetime longevity. 1/4" barb.
This QD is for the Gas In side.
2-1/8" H
Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless.
Kegland Part Number: KL02981
Leak-Proof Double O-Ring Technology: Engineered with high-quality EPDM double O-rings, providing twice the sealing surface of standard push-in fittings for maximum reliability and a leak-free draft setup.
Modular & Customizable Gas Control: Features integrated, removable check valves to prevent backflow and a tool-free "pop-tab" design that allows you to easily swap, remove, or plug individual ball valves.
Instant Tool-Free Connectivity: Designed for 8mm EVABarrier tubing, the Duotight push-to-connect system allows for secure, seconds-fast installation with flexible mounting options for any kegerator or fermentation chamber.
Please Note: The Duotight Manifolds feature 8mm Duotight connections at both ends. One end is intended for your gas line and the other can be used to attach another manifold or a variety of accessories. If you will not be installing anything on the other end, you will need a 8mm Plug to cap the opposite end from your Gas In (see below).
Streamline your draft setup with the Duotight Gas Manifold, featuring integrated check valves on every ball valve outlet. These check valves provide essential protection by preventing backflow; however, they can be easily removed if you require gas to flow freely in both directions. 8mm Duotight push-to-connect inlet and outlets allow you to easily connect EVABarrier draft tubing in seconds. Available in 2-Way, 4-Way, and 6-Way configurations.
Customization & Modular Design
This manifold is designed for flexibility. If you need to shut off specific lines permanently, we recommend using the Duotight 8mm Plug (DUO102). Modifying the unit is straightforward: use a thin flat-head screwdriver to pop the black retainer tabs, allowing you to remove or swap individual ball valves as needed. If you wish to expand your manifold the future, multiple Duotight Manifolds can be connected using the 8mm Rigid Joiners (DUO202).
Mounting Solutions
Every manifold comes ready for installation with button-head screws for standard mounting. If you prefer not to drill into your kegerator or fermentation chamber, we suggest using Duotight Adhesive Brackets (DUO263) for a secure, tool-free setup.
High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage.
The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market.
EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free.
No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
KegLand Part Numbers:
KL46220
KL46237
KL46244
Duotight Manifold | User Guide
Keep your draft faucet in perfect working order.
Replace the washer that seals the sliding shaft of your faucet to prevent leaks
With this washer you can renew a worn-out part on your well-used draft faucet. This washer seals the sliding shaft, which often becomes brittle with age causing the faucet to drip.
Replacement O-ring for the Fermonster Plastic Carboy lids (all sizes use same lid).
The o-ring is a little tricky to install so please be sure to watch our video in the video tab on how to install it.
Circulation manifold for mashing and sparging. Fastened around the sparge pipe and can be adjusted to sit at the top of the grain bed.
Included:
Manifold
Sparge adapter with 1/2" (12 mm) hose barb
Silicone core
Silicone tube 3/8" x 5/8", 3.2' (10mm x 16 mm, 1 meter)
Tri Clamp, 34mm
D-Type keg coupler for standard American sanke kegs
All stainless steel with stainless coupler body and stainless keg probe
Pull-to-engage lever handle
Includes 3/8" OD barb for gas inlet
Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
Made in the USA
The D-Style beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the style tap you’ll need.
American-made by Taprite, this coupler is constructed from stainless steel and features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. The 304 stainless body and probe will provide a more reliable life span compared to its nickle-plated counterpart. Features a built-in pressure relief valve for safety.
To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port.
The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
Create your own custom-fit gas line with this 1/4" ID Tubing.
This diameter of tubing will give you an extra-tight fit gas line, particularly with homebrew quick disconnects. Simply soak the 1/4" line in hot water before attaching to larger 5/16" fittings. It is also well suited for beer lines that are 10-25' in length.
Technical Specifications: 1/2" Outer Diameter. 1/4" line provides .65 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 1/4" line holds 1/3 of an ounce per foot. Made from PVC.
Integrated 2" TC Port: Seamlessly connect a condenser or still top to recover hop oils, distill water, or experiment with spirits, transforming your kettle into a versatile system.
Optimal Vapor Collection: The raised dome design facilitates efficient vapor collection and separation, ensuring high-quality distillation and enhanced performance.
Secure & Durable Design: Crafted for a precise fit and a secure seal, this domed lid ensures optimal function and lasting durability for all your brewing and distilling needs.
Bring your brewing to the next level with the BrewBuilt Domed Lid for Dish Bottom Kettles. This essential upgrade features a centered 2" tri-clamp (TC) port, giving you the flexibility to easily add a condenser or still top.
Whether you're looking to recover hop oils, distill water, or experiment with spirits, this domed lid is designed for a seamless fit and optimal performance. The raised dome design allows for proper vapor collection and separation, while the high-quality construction ensures a secure seal. Transform your BrewBuilt kettle into a multi-functional powerhouse and unlock a new world of brewing possibilities.
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "Out" label to clearly identify the QD for gas use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" flare thread connection Your Kegs are made out of stainless steel, why settle for plastic Quick Disconnects? Upgrade your serving setup to fully Stainless with a pair of Torpedo Ball Lock QDs! These hefty pieces are constructed of 304 SS, designed for lifetime longevity. Printed clearly with "In" and "Out" so even after a few they're easy to work with. Available for both Beer Out and Gas In, with either Barbed or Flared connections. See YMAN's below for the appropriate connectors! A flare fitting washer (KEG602) is recommended for use with this product. Perfect with our Torpedo Kegs, these will work with any Ball Lock Corny Keg. Features: 304 SS Construction - Built to last a lifetime 1/4" Flare connection Ball Lock Beverage Out 2" Height
Angled 1/4" tailpiece that is used with hex nut (D1740). Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Made from stianless steel. ID - 3/16" OD - 1/4" Kegland Part number: KL05081
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 2.5" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Anvil Brewing Equipment dip tube, complete with nut and o-ring. The perfect companion for your Anvil Brewing Equipment kettle ball valve! This ½” diameter dip tube installs quickly without tools to any 1/2” male NPT fitting and can be oriented at any angle. Compatible with the Anvil Brewing Equipment kettle strainer (coming soon!)
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Kit with everything you need to connect our leak free quick connectors to the cooling jacket on your brewing system.
The quick connector is connected to the lower port and the 10mm barb on the upper port to prevent any pressure in the jacket.
Made for Brewtools 8.5x14mm reinforced EVA tube
In the box:
Tri Clamp 34mm, 2 pcs
TC Gasket, 34mm, DN20 5-pack, 1 pcs
TC34mm to 10mm barb
TC34mm to 3/8" F-NPT, 1 pcs
Quick Connector, Female to 3/8" NPT, 1 pcs
Quick Connector, Male to 10mm barb, 1 pcs
You also need:
8.5x14mm EVA-tube required from your water source and to your drain
Adapter from your water source to the 8.5x14mm tube (9-10mm barb)
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used with 3/16 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
The Stainless Bucket Fermentor is the perfect fermentation vessel for 2.5 to 3 gallon batches. The small design enables it to easily fit inside a refrigerated unit. Also available in 7.5 gallon size for 5 gallon batches. Features:
304 Stainless Steel Coned Bottom Embossed Level Markings Rotating Racking Arm Includes Ball Valve, Airlock, and Stopper Liquid Crystal Thermometer Dimensions:
Height - 14.75" to top of lid (Add 6.25" for airlock and stopper) Width - 14.5" handle to handle Depth - 13.5" including valve
Foam on Beer Detectors, or FOBs, are commonly used in commercial draft systems as a way to eliminate product waste and increase profits. When a keg completely empties and foam passes into the FOB it will shut off flow and in doing so keep the draft line completely full of beer until a new keg is tapped. This means you can hook a fresh keg and continue pouring without foaming issues, preventing you from wasting beer that is otherwise needed to refill the line and purge the system.
The FOB can also be used in homebrewing applications as a convenient way to purge kegs of oxygen. Check out video below where our friend Kee repurposes the FOB to move sanitizer from one keg to another and purge the keg of oxygen in the process.
Comes with 3/8" Duotight compatible barbs at the inlet and outlet, allowing you to easily hook up EVABarrier tubing with either a 9.5 mm joiner or 9.5 mm to 8 mm reducer (DUO113 / DUO105). If not using EVABarrier, simply clamp the line directly onto the barb.
Setup and Use:
Attach beverage line from outlet of keg coupler to straight inlet of FOB.
Attach beverage line from elbow outlet of FOB to faucet shank.
Connect fresh keg and push down purge button until the chamber fills with beer.
Push bottom knob in to lift float then pull out for normal operation.
Kegland Part number: KL00802
Keg lube is incredibly beneficial for your kegging gaskets and o-rings, not only to help keep them from cracking and wearing out, but to help create a leak-proof seal as well! We recommend that all keggers have a tube of keg lube on hand to make sure your draft system remains leak free and pouring smoothly.
Use keg lube on lid o-rings, body connect o-rings, clover clamp fittings, and any other brewery application where you need a little extra help. Unlike most lubes, CIP Film can be removed easily with hot water for fast cleanup. FDA approved.
3/4 inch mpt and 3/4 inch barb. Made from 304 stainless. Will work on Ss Brewing technologies line of Chronical Fermenters, as well as with many 20x20 cm Plate & Frame Filters.
This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! When using two ball lock caps, we recommend pairing this yellow plastic cap with a red plastic cap so you can easily identify which caps are being used for liquid or gas. The barb is Duotight compatible. If you'd like to use the cap with 8 mm OD EVABarrier tubing, see DUO10. For a stainless steel option see KG50. Specs: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28mm PCO 1881 Threads Kegland Part number: KL1078
Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease! These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N. In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.
Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06620
Heavy-duty stainless steel lid can be used with a still top or steam condenser Sight glass disc allows you to watch your boil without having to remove your still or condenser Easily remove the disc during the hot break or to add hops or other boil additions Molded grips for easier handling with the lid is still hot Compatible with 35L BrewZillas and DigiBoils If you're using an AlcoEngine Still Top or Steam Condenser Set with your BrewZilla or DigiBoil, this heavy-duty stainless lid with sight glass is virtually a must-have. Whether distilling or brewing, keeping an eye on your boil will help you stop foaming or boil over issues before they happen. With the standard distillation lid, checking on your wash or wort means removing or tipping the apparatus over to get a peek inside the boiler, which can be a cumbersome (if not dangerous) part of your process. The PPSU sight glass disc can also be easily removed to add hops or other boil additions through the large 3" T.C. ferrule. (Use gloves, it will be hot!) The sight glass disc is made from a special PPSU plastic—an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. For use with an AlcoEngine Still Top, you will also need this single sided bead seal. Installing AlcoEngine Still: Remove the bottom nut and seal from the column Place the single sided bead seal on the lid's tri-clamp ferrule (beaded side facing down) Pass the threaded bottom section of the column through the ferrule Secure in place with a 2" tri-clamp The column's bottom nut and seal are not needed
Specs: 2" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket KegLand Part Number: KL25812
Ever wanted to punch out a few more gallons of wort with your 35L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution!
The all new 35L BrewZilla Boiler Extension adds 3.1 gallons of headroom. Turn that 9.2G BrewZilla or DigiMash system into a 12.3G behemoth!
The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid, these clamps can help provide more tension.
Compatible with Gen 3 / Gen 4 BrewZillas.
Please Note: The 110V unit may struggle to bring 10+ gallons of wort to boil. Expect longer heating times and a more gentle boil. An insulating jacket is highly recommended if using the 110V model.
You Might Also Need:
35L Extended Malt Pipe
35L Wire Support Ring
Recirculation Arm Extension
KegLand Part Number: KL22231
Full Coupler with 3/8" Female BSPP Thread. Full couplers have threads for insertion from both sides.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06484
Due to high demand, the 100 g is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid August.
S-04 produces fruity and floral notes and is ideal for a large range of American and English Ales
A fast fermenting, highly flocculent strain that tends to produce beers with higher clarity
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
Homebrewers love this commercial English Ale yeast for its big, clean flavor; its rapid fermentation; and its highly flocculant character.
Widely recommended for practically any American or English style beer, S-04 yeast a rapid starter and finisher which settles out extremely well, leading to a clean finished beer. Great to keep a few packets as back-ups or just to use as a less-expensive alternative to liquid cultures.
This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below.
Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Attenuation: 74-82%
Sedimentation Time: Fast
Alcohol Tolerance: 9-11% ABV
Optimum Fermentation Temp: 64-78°F
*See the technical data sheet below for more information on rehydration, usage and storage.
Designed specifically for mounting the NukaTap Mini Beer Faucet on any kegerator, keezer, cold room wall, or other flat surface Connect beer line directly to the faucet, reducing the amount of temperature loss to a standard draft shank No spinning faucets. Your tap will remain in a fixed orientation once locked into the collet Easy installation. No need to drill a large hole through your fridge to accommodate a standard 5/8" draft shank Use with 8 mm OD EVABarrier draft tubing Note: Faucet Sold Separately This shank kit is specifically designed to suit the NukaTap Mini Beer Faucet and will allow you to connect the NukaTap Mini to a cooler box, kegerator, keg fridge, cold room wall or any other flat surface. This wall mount shank kit is for use with 8 mm OD EVABarrier. For the shank kit for use with 6.35 mm OD EVABarrier, see here. New Innovative Shank Design Unlike other shank kits, this kit doesn't use a bulky 5/8" threaded shank. The issue with a standard draft shank is that acts as a heat sink, and due to the fact that most shanks sit inside an insulated wall, this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This results in substantial "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the faucet, greatly reducing the volume of non-refrigerated beer. No Spinning Shanks If you have ever installed a traditional 5/8" long shank, you will know how frustrating it is when you use the faucet and it starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the faucet to any orientation, but once the collet is tight, interlocking teeth on this shank kit and the NukaTap Mini will hold the tap permanently in the correct orientation. Easy Installation Another advantage compared to standard shanks is that this kit doesn't require you to drill a large 3/4"-1" hole through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result, an 8mm (5/16") conventional drill bit is all that is necessary for installation. However, if you are concerned about the small amount of beer sitting in the draft line inside the wall not being refrigerated, you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this the Step Drill Bit is the best tool for the job. Any Wall Thickness Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 2.7" thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. However, if the wall is thicker than 2.7" you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall so a common 1-1/4" long screw may be all that is required. Specifications: Beer Line Diameter: 8 mm OD EVABarrier Collet and Screw Cover: 304 Grade Stainless Steel O-ring Material: Dual O-ring Silicone/EPDM combination Plastic Mounting: Polyketone (POK) Temperature Range: 14-212°F (-10-100°C) Max Pressure: 150 psi KegLand Part Number: KL32186
Full Coupler with 1/4" Female BSPP Thread. Full couplers have threads for insertion from both sides.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06477
Comes with a 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 4" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
6-1/4" - Total Length (Tip to Tip)
5-1/8" - Shank Length (Without Nut & Nipple)
3-3/4" - Thread Length
4-5/8" - Pass Through Length
3/16 in. Nipple
This rebuild kit includes a 3.5" T.C. Gasket and 3mm x 77mm O-ring to aid in the repair of the ForgeFit 2" T.C. Ball Valve. The 3.5" T.C. Gasket requires a food grade grease for assembly with the FF190 Ball Valve.
