This versatile little filter is a beer maker's insurance policy! Whether you’re aerating or racking you will appreciate having the peace-of-mind of knowing that your brew will not be contaminated by whatever is floating around in the air. Use it anywhere you need to keep something sanitary. Both 1/4"" and 3/8"" tubing will attach to it, and it will snugly fit in any standard stopper as well. Check out this list of suggested uses: Airlock: The most common use might be as an airlock on any kind of fermenter. Unlike other small sanitary filters, this unit fits perfectly into a stopper. Works great for conical fermenters where air is taken in when samples are taken or trub is dumped. Using the sanitary filter as airlock also eliminates the concern of drawing air back in as hot liquid cools and contracts in a fermenter. It is not appropriate for long term storage of beer as it is not an oxygen barrier. Inline Aeration/Oxygenation Filter: With an oxygenation or aeration system, such as our FE375 or FE380, it will filter contaminants out of oxygen or air. It is connected inline between pump/O2 tank and Stainless Diffusion Stone. Hand Pumps: Some breweries use this filter with the breweries hand pump system. Air going back into the cask is sanitized through this filter. This has extended shelf life of Real Ales by up to 2 weeks! CO2 Filtration: Used inline with your CO2 Kegging setup, this piece can be used to filter out any potential contaminants from your CO2 Tank. About the inline filters: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the airflow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. Can last up to 1 year. Discard if there are any signs of discoloration. This product qualifies as a HEPA filter under US government standards. STORE DRY AT ALL TIMES. DO NOT SANITIZE FILTER. **NOTE: Temporarily shipping a smaller diameter unit due to supply chain issues**
$5.49
Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 3/8" cane and 24" racking tube. 5/16" or 3/8" ID tubing must be purchased separately. Also available in 1/2" and 3/8" Mini models. Maximum Temperature: 140°F (60°C) Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.
$13.99
Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 1/2" cane and 24" racking tube. 7/16" or 1/2" ID tubing must be purchased separately. Also available in 3/8" and 3/8" Mini models. Maximum Temperature: 140°F (60°C) Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.
$16.99
Perfect size for siphoning or bottling from a gallon jug. Takes 5/16" tubing (see YMAN section below). Instructions: Sanitize and rinse your Auto Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Auto Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out the inner tube and sanitize your Auto Siphon for storage. Our standard 1/2" racking cane tips will work with this product, see our You Might Also Need section below for product information.
$14.49
Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation. The Regular Auto Siphon is recommended for use with standard buckets and carboys. We strongly recommend you use 5/16 in ID tubing (not 3/8 in) to prevent air leaks from stopping the siphon. Outer diameter of the siphon shaft is 7/8 inches.
$16.49
Leave the gunk behind and keep your beer clear with this racking cane filter. A great solution at the right price. This Racking Cane Filter Screen is very effective when racking with whole hops, oak, or fruit in the fermenter. Simply slide this over the bottom of the racking cane and begin the siphon! Made from Stainless Steel mesh. Some customer are also using this in the their keg attached to the bev out dip tube. Fits on a 3/8" stainless steel racking cane. Note: You may want to use a hose clamp to tighten this to the racking cane.
$8.79
The Easy Siphon Clip holds your Easy Siphons to Carboys, Pails, Fermonsters, Buckets and more! Made from lasting plastic materials, so you can clip and unclip your Easy Siphons without issues. Works with: Easy Siphon 3/8" & 1/2" (R511 / R513) 2022 models - 7/8" thick Mini Easy Siphon The Sample Taker (MT342) Legacy Easy Siphon 3/8" & 1/2" (R510 / R512) pre-2022 Models - 1" thick Please note: if the clip is used with the Legacy Easy Siphons (pre-2022 models), it will not work with the new models afterwards as the clamps will stretch to adapt to the bigger diameter of the older models.
$4.99
30'' x 1/2" OD acrylic racking cane, 5' hose, racking clip, hose clamp. Used to siphon beer or wine from carboy to carboy.
$14.49
Clear plastic racking cane with curve. Good for 6.5 gallon carboys. 3/8" diameter is the standard size for filling beer bottles. 3/8" OD 30" total length (including bend) 27" from tip to bend
$8.99
Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation. The Large Auto Siphon is recomended for use with standard buckets and carboys. We strongly recomend you use 7/16 in ID tubing (not 1/2 in) to prevent air leaks from stopping the siphon.
$17.99
30'' x 3/8" OD acrylic racking cane, 5' hose, racking clip, hose clamp. Use to siphon beer or wine from vessel to another.
$10.99
Stainless Steel racking cane - 3/8 inch OD x 26 inches long from tip to bend (30" total), with curved top. 3/8 inch diameter is the standard size for filling beer bottles.
$16.49
Racking canes are the most common tool used to transfer your homebrew from a carboy or other fermentation vessel to your bottling bucket or kegs. This racking cane comes with a tip cover that will help to keep trub out of the bottling bucket or keg, leaving you with a clearer finished product! 1/2" OD 30" total length (including bend) 27" from tip to bend
$9.99
Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers Mini Easy Siphon will reduce loss when racking from small vessels The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 3/8" cane and 15" racking tube. 5/16" or 3/8" ID tubing must be purchased separately. Maximum Temperature: 140°F (60°C) Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.
$10.99
We and our partners, including Shopify, use cookies and other technologies to personalize your experience, show you ads, and perform analytics, and we will not use cookies or other technologies for these purposes unless you accept them. Learn more in our Privacy Policy
